From: Roger Quadros <rogerq@ti.com>
To: <t-kristo@ti.com>
Cc: <robh@kernel.org>, <kishon@ti.com>, <nm@ti.com>,
<vigneshr@ti.com>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, Roger Quadros <rogerq@ti.com>
Subject: [PATCH v4 2/6] arm64: dts: ti: k3-j721e-main: Add WIZ and SERDES PHY nodes
Date: Mon, 29 Jun 2020 15:52:50 +0300 [thread overview]
Message-ID: <20200629125254.28754-3-rogerq@ti.com> (raw)
In-Reply-To: <20200629125254.28754-1-rogerq@ti.com>
From: Kishon Vijay Abraham I <kishon@ti.com>
Add DT nodes for all instances of WIZ and SERDES modules.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 241 ++++++++++++++++++++++
1 file changed, 241 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 96c929da639d..b11cb51af747 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -4,6 +4,7 @@
*
* Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/
*/
+#include <dt-bindings/phy/phy.h>
&cbass_main {
msmc_ram: sram@70000000 {
@@ -277,6 +278,246 @@
pinctrl-single,function-mask = <0xffffffff>;
};
+ dummy_cmn_refclk: dummy-cmn-refclk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <100000000>;
+ };
+
+ dummy_cmn_refclk1: dummy-cmn-refclk1 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <100000000>;
+ };
+
+ serdes_wiz0: wiz@5000000 {
+ compatible = "ti,j721e-wiz-16g";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 292 5>, <&k3_clks 292 11>, <&dummy_cmn_refclk>;
+ clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+ assigned-clocks = <&k3_clks 292 11>, <&k3_clks 292 0>;
+ assigned-clock-parents = <&k3_clks 292 15>, <&k3_clks 292 4>;
+ num-lanes = <2>;
+ #reset-cells = <1>;
+ ranges = <0x5000000 0x0 0x5000000 0x10000>;
+
+ wiz0_pll0_refclk: pll0-refclk {
+ clocks = <&k3_clks 292 11>, <&dummy_cmn_refclk>;
+ #clock-cells = <0>;
+ assigned-clocks = <&wiz0_pll0_refclk>;
+ assigned-clock-parents = <&k3_clks 292 11>;
+ };
+
+ wiz0_pll1_refclk: pll1-refclk {
+ clocks = <&k3_clks 292 0>, <&dummy_cmn_refclk1>;
+ #clock-cells = <0>;
+ assigned-clocks = <&wiz0_pll1_refclk>;
+ assigned-clock-parents = <&k3_clks 292 0>;
+ };
+
+ wiz0_refclk_dig: refclk-dig {
+ clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
+ #clock-cells = <0>;
+ assigned-clocks = <&wiz0_refclk_dig>;
+ assigned-clock-parents = <&k3_clks 292 11>;
+ };
+
+ wiz0_cmn_refclk_dig_div: cmn-refclk-dig-div {
+ clocks = <&wiz0_refclk_dig>;
+ #clock-cells = <0>;
+ };
+
+ wiz0_cmn_refclk1_dig_div: cmn-refclk1-dig-div {
+ clocks = <&wiz0_pll1_refclk>;
+ #clock-cells = <0>;
+ };
+
+ serdes0: serdes@5000000 {
+ compatible = "ti,sierra-phy-t0";
+ reg-names = "serdes";
+ reg = <0x5000000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ resets = <&serdes_wiz0 0>;
+ reset-names = "sierra_reset";
+ clocks = <&wiz0_cmn_refclk_dig_div>, <&wiz0_cmn_refclk1_dig_div>;
+ clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div";
+ };
+ };
+
+ serdes_wiz1: wiz@5010000 {
+ compatible = "ti,j721e-wiz-16g";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ power-domains = <&k3_pds 293 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 293 5>, <&k3_clks 293 13>, <&dummy_cmn_refclk>;
+ clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+ assigned-clocks = <&k3_clks 293 13>, <&k3_clks 293 0>;
+ assigned-clock-parents = <&k3_clks 293 17>, <&k3_clks 293 4>;
+ num-lanes = <2>;
+ #reset-cells = <1>;
+ ranges = <0x5010000 0x0 0x5010000 0x10000>;
+
+ wiz1_pll0_refclk: pll0-refclk {
+ clocks = <&k3_clks 293 13>, <&dummy_cmn_refclk>;
+ #clock-cells = <0>;
+ assigned-clocks = <&wiz1_pll0_refclk>;
+ assigned-clock-parents = <&k3_clks 293 13>;
+ };
+
+ wiz1_pll1_refclk: pll1-refclk {
+ clocks = <&k3_clks 293 0>, <&dummy_cmn_refclk1>;
+ #clock-cells = <0>;
+ assigned-clocks = <&wiz1_pll1_refclk>;
+ assigned-clock-parents = <&k3_clks 293 0>;
+ };
+
+ wiz1_refclk_dig: refclk-dig {
+ clocks = <&k3_clks 293 13>, <&k3_clks 293 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
+ #clock-cells = <0>;
+ assigned-clocks = <&wiz1_refclk_dig>;
+ assigned-clock-parents = <&k3_clks 293 13>;
+ };
+
+ wiz1_cmn_refclk_dig_div: cmn-refclk-dig-div{
+ clocks = <&wiz1_refclk_dig>;
+ #clock-cells = <0>;
+ };
+
+ wiz1_cmn_refclk1_dig_div: cmn-refclk1-dig-div {
+ clocks = <&wiz1_pll1_refclk>;
+ #clock-cells = <0>;
+ };
+
+ serdes1: serdes@5010000 {
+ compatible = "ti,sierra-phy-t0";
+ reg-names = "serdes";
+ reg = <0x5010000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ resets = <&serdes_wiz1 0>;
+ reset-names = "sierra_reset";
+ clocks = <&wiz1_cmn_refclk_dig_div>, <&wiz1_cmn_refclk1_dig_div>;
+ clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div";
+ };
+ };
+
+ serdes_wiz2: wiz@5020000 {
+ compatible = "ti,j721e-wiz-16g";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ power-domains = <&k3_pds 294 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 294 5>, <&k3_clks 294 11>, <&dummy_cmn_refclk>;
+ clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+ assigned-clocks = <&k3_clks 294 11>, <&k3_clks 294 0>;
+ assigned-clock-parents = <&k3_clks 294 15>, <&k3_clks 294 4>;
+ num-lanes = <2>;
+ #reset-cells = <1>;
+ ranges = <0x5020000 0x0 0x5020000 0x10000>;
+
+ wiz2_pll0_refclk: pll0-refclk {
+ clocks = <&k3_clks 294 11>, <&dummy_cmn_refclk>;
+ #clock-cells = <0>;
+ assigned-clocks = <&wiz2_pll0_refclk>;
+ assigned-clock-parents = <&k3_clks 294 11>;
+ };
+
+ wiz2_pll1_refclk: pll1-refclk {
+ clocks = <&k3_clks 294 0>, <&dummy_cmn_refclk1>;
+ #clock-cells = <0>;
+ assigned-clocks = <&wiz2_pll1_refclk>;
+ assigned-clock-parents = <&k3_clks 294 0>;
+ };
+
+ wiz2_refclk_dig: refclk-dig {
+ clocks = <&k3_clks 294 11>, <&k3_clks 294 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
+ #clock-cells = <0>;
+ assigned-clocks = <&wiz2_refclk_dig>;
+ assigned-clock-parents = <&k3_clks 294 11>;
+ };
+
+ wiz2_cmn_refclk_dig_div: cmn-refclk-dig-div {
+ clocks = <&wiz2_refclk_dig>;
+ #clock-cells = <0>;
+ };
+
+ wiz2_cmn_refclk1_dig_div: cmn-refclk1-dig-div {
+ clocks = <&wiz2_pll1_refclk>;
+ #clock-cells = <0>;
+ };
+
+ serdes2: serdes@5020000 {
+ compatible = "ti,sierra-phy-t0";
+ reg-names = "serdes";
+ reg = <0x5020000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ resets = <&serdes_wiz2 0>;
+ reset-names = "sierra_reset";
+ clocks = <&wiz2_cmn_refclk_dig_div>, <&wiz2_cmn_refclk1_dig_div>;
+ clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div";
+ };
+ };
+
+ serdes_wiz3: wiz@5030000 {
+ compatible = "ti,j721e-wiz-16g";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ power-domains = <&k3_pds 295 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 295 5>, <&k3_clks 295 9>, <&dummy_cmn_refclk>;
+ clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+ assigned-clocks = <&k3_clks 295 9>, <&k3_clks 295 0>;
+ assigned-clock-parents = <&k3_clks 295 13>, <&k3_clks 295 4>;
+ num-lanes = <2>;
+ #reset-cells = <1>;
+ ranges = <0x5030000 0x0 0x5030000 0x10000>;
+
+ wiz3_pll0_refclk: pll0-refclk {
+ clocks = <&k3_clks 295 9>, <&dummy_cmn_refclk>;
+ #clock-cells = <0>;
+ assigned-clocks = <&wiz3_pll0_refclk>;
+ assigned-clock-parents = <&k3_clks 295 9>;
+ };
+
+ wiz3_pll1_refclk: pll1-refclk {
+ clocks = <&k3_clks 295 0>, <&dummy_cmn_refclk1>;
+ #clock-cells = <0>;
+ assigned-clocks = <&wiz3_pll1_refclk>;
+ assigned-clock-parents = <&k3_clks 295 0>;
+ };
+
+ wiz3_refclk_dig: refclk-dig {
+ clocks = <&k3_clks 295 9>, <&k3_clks 295 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
+ #clock-cells = <0>;
+ assigned-clocks = <&wiz3_refclk_dig>;
+ assigned-clock-parents = <&k3_clks 295 9>;
+ };
+
+ wiz3_cmn_refclk_dig_div: cmn-refclk-dig-div {
+ clocks = <&wiz3_refclk_dig>;
+ #clock-cells = <0>;
+ };
+
+ wiz3_cmn_refclk1_dig_div: cmn-refclk1-dig-div {
+ clocks = <&wiz3_pll1_refclk>;
+ #clock-cells = <0>;
+ };
+
+ serdes3: serdes@5030000 {
+ compatible = "ti,sierra-phy-t0";
+ reg-names = "serdes";
+ reg = <0x5030000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ resets = <&serdes_wiz3 0>;
+ reset-names = "sierra_reset";
+ clocks = <&wiz3_cmn_refclk_dig_div>, <&wiz3_cmn_refclk1_dig_div>;
+ clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div";
+ };
+ };
+
main_uart0: serial@2800000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02800000 0x00 0x100>;
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
next prev parent reply other threads:[~2020-06-29 18:39 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-29 12:52 [PATCH v4 0/6] arm64: ti: k3-j721e: Add SERDES PHY and USB3.0 support Roger Quadros
2020-06-29 12:52 ` [PATCH v4 1/6] dt-bindings: mfd: ti,j721e-system-controller.yaml: Add J721e system controller Roger Quadros
2020-07-09 23:18 ` Rob Herring
2020-06-29 12:52 ` Roger Quadros [this message]
2020-06-29 12:52 ` [PATCH v4 3/6] arm64: dts: ti: k3-j721e-main: Add system controller node and SERDES lane mux Roger Quadros
2020-07-09 23:19 ` Rob Herring
2020-06-29 12:52 ` [PATCH v4 4/6] arm64: dts: ti: k3-j721e-main.dtsi: Add USB to SERDES MUX Roger Quadros
2020-06-29 12:52 ` [PATCH v4 5/6] arm64: dts: ti: k3-j721e: Enable Super-Speed support for USB0 Roger Quadros
2020-06-29 12:52 ` [PATCH v4 6/6] arm64: dts: k3-j721e-proc-board: Add wait time for sampling Type-C DIR line Roger Quadros
2020-07-17 7:36 ` [PATCH v4 0/6] arm64: ti: k3-j721e: Add SERDES PHY and USB3.0 support Tero Kristo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200629125254.28754-3-rogerq@ti.com \
--to=rogerq@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=kishon@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh@kernel.org \
--cc=t-kristo@ti.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.