From: Roger Quadros <rogerq@ti.com>
To: <t-kristo@ti.com>
Cc: <robh@kernel.org>, <kishon@ti.com>, <nm@ti.com>,
<vigneshr@ti.com>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, Roger Quadros <rogerq@ti.com>
Subject: [PATCH v4 3/6] arm64: dts: ti: k3-j721e-main: Add system controller node and SERDES lane mux
Date: Mon, 29 Jun 2020 15:52:51 +0300 [thread overview]
Message-ID: <20200629125254.28754-4-rogerq@ti.com> (raw)
In-Reply-To: <20200629125254.28754-1-rogerq@ti.com>
From: Kishon Vijay Abraham I <kishon@ti.com>
The system controller node manages the CTRL_MMR0 region.
Add serdes_ln_ctrl node which is used for controlling the SERDES lane mux.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 27 ++++++++++++
include/dt-bindings/mux/mux-j721e-wiz.h | 53 +++++++++++++++++++++++
2 files changed, 80 insertions(+)
create mode 100644 include/dt-bindings/mux/mux-j721e-wiz.h
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index b11cb51af747..5f1f11b6fdff 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -5,6 +5,8 @@
* Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/
*/
#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/mux/mux.h>
+#include <dt-bindings/mux/mux-j721e-wiz.h>
&cbass_main {
msmc_ram: sram@70000000 {
@@ -19,6 +21,31 @@
};
};
+ scm_conf: scm-conf@100000 {
+ compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+ reg = <0 0x00100000 0 0x1c000>; /* excludes pinctrl region */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x00100000 0x1c000>;
+
+ serdes_ln_ctrl: serdes-ln-ctrl@4080 {
+ compatible = "mmio-mux";
+ reg = <0x00004080 0x50>;
+ #mux-control-cells = <1>;
+ mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */
+ <0x4090 0x3>, <0x4094 0x3>, /* SERDES1 lane0/1 select */
+ <0x40a0 0x3>, <0x40a4 0x3>, /* SERDES2 lane0/1 select */
+ <0x40b0 0x3>, <0x40b4 0x3>, /* SERDES3 lane0/1 select */
+ <0x40c0 0x3>, <0x40c4 0x3>, <0x40c8 0x3>, <0x40cc 0x3>;
+ /* SERDES4 lane0/1/2/3 select */
+ idle-states = <SERDES0_LANE0_PCIE0_LANE0>, <SERDES0_LANE1_PCIE0_LANE1>,
+ <SERDES1_LANE0_PCIE1_LANE0>, <SERDES1_LANE1_PCIE1_LANE1>,
+ <SERDES2_LANE0_PCIE2_LANE0>, <SERDES2_LANE1_PCIE2_LANE1>,
+ <MUX_IDLE_AS_IS>, <SERDES3_LANE1_USB3_0>,
+ <SERDES4_LANE0_EDP_LANE0>, <SERDES4_LANE1_EDP_LANE1>, <SERDES4_LANE2_EDP_LANE2>, <SERDES4_LANE3_EDP_LANE3>;
+ };
+ };
+
gic500: interrupt-controller@1800000 {
compatible = "arm,gic-v3";
#address-cells = <2>;
diff --git a/include/dt-bindings/mux/mux-j721e-wiz.h b/include/dt-bindings/mux/mux-j721e-wiz.h
new file mode 100644
index 000000000000..fd1c4ea9fc7f
--- /dev/null
+++ b/include/dt-bindings/mux/mux-j721e-wiz.h
@@ -0,0 +1,53 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header provides constants for J721E WIZ.
+ */
+
+#ifndef _DT_BINDINGS_J721E_WIZ
+#define _DT_BINDINGS_J721E_WIZ
+
+#define SERDES0_LANE0_QSGMII_LANE1 0x0
+#define SERDES0_LANE0_PCIE0_LANE0 0x1
+#define SERDES0_LANE0_USB3_0_SWAP 0x2
+
+#define SERDES0_LANE1_QSGMII_LANE2 0x0
+#define SERDES0_LANE1_PCIE0_LANE1 0x1
+#define SERDES0_LANE1_USB3_0 0x2
+
+#define SERDES1_LANE0_QSGMII_LANE3 0x0
+#define SERDES1_LANE0_PCIE1_LANE0 0x1
+#define SERDES1_LANE0_USB3_1_SWAP 0x2
+#define SERDES1_LANE0_SGMII_LANE0 0x3
+
+#define SERDES1_LANE1_QSGMII_LANE4 0x0
+#define SERDES1_LANE1_PCIE1_LANE1 0x1
+#define SERDES1_LANE1_USB3_1 0x2
+#define SERDES1_LANE1_SGMII_LANE1 0x3
+
+#define SERDES2_LANE0_PCIE2_LANE0 0x1
+#define SERDES2_LANE0_SGMII_LANE0 0x3
+#define SERDES2_LANE0_USB3_1_SWAP 0x2
+
+#define SERDES2_LANE1_PCIE2_LANE1 0x1
+#define SERDES2_LANE1_USB3_1 0x2
+#define SERDES2_LANE1_SGMII_LANE1 0x3
+
+#define SERDES3_LANE0_PCIE3_LANE0 0x1
+#define SERDES3_LANE0_USB3_0_SWAP 0x2
+
+#define SERDES3_LANE1_PCIE3_LANE1 0x1
+#define SERDES3_LANE1_USB3_0 0x2
+
+#define SERDES4_LANE0_EDP_LANE0 0x0
+#define SERDES4_LANE0_QSGMII_LANE5 0x2
+
+#define SERDES4_LANE1_EDP_LANE1 0x0
+#define SERDES4_LANE1_QSGMII_LANE6 0x2
+
+#define SERDES4_LANE2_EDP_LANE2 0x0
+#define SERDES4_LANE2_QSGMII_LANE7 0x2
+
+#define SERDES4_LANE3_EDP_LANE3 0x0
+#define SERDES4_LANE3_QSGMII_LANE8 0x2
+
+#endif /* _DT_BINDINGS_J721E_WIZ */
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
next prev parent reply other threads:[~2020-06-29 20:16 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-29 12:52 [PATCH v4 0/6] arm64: ti: k3-j721e: Add SERDES PHY and USB3.0 support Roger Quadros
2020-06-29 12:52 ` [PATCH v4 1/6] dt-bindings: mfd: ti,j721e-system-controller.yaml: Add J721e system controller Roger Quadros
2020-07-09 23:18 ` Rob Herring
2020-06-29 12:52 ` [PATCH v4 2/6] arm64: dts: ti: k3-j721e-main: Add WIZ and SERDES PHY nodes Roger Quadros
2020-06-29 12:52 ` Roger Quadros [this message]
2020-07-09 23:19 ` [PATCH v4 3/6] arm64: dts: ti: k3-j721e-main: Add system controller node and SERDES lane mux Rob Herring
2020-06-29 12:52 ` [PATCH v4 4/6] arm64: dts: ti: k3-j721e-main.dtsi: Add USB to SERDES MUX Roger Quadros
2020-06-29 12:52 ` [PATCH v4 5/6] arm64: dts: ti: k3-j721e: Enable Super-Speed support for USB0 Roger Quadros
2020-06-29 12:52 ` [PATCH v4 6/6] arm64: dts: k3-j721e-proc-board: Add wait time for sampling Type-C DIR line Roger Quadros
2020-07-17 7:36 ` [PATCH v4 0/6] arm64: ti: k3-j721e: Add SERDES PHY and USB3.0 support Tero Kristo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200629125254.28754-4-rogerq@ti.com \
--to=rogerq@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=kishon@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh@kernel.org \
--cc=t-kristo@ti.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.