All of lore.kernel.org
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Rob Herring <robh+dt@kernel.org>, Kukjin Kim <kgene@kernel.org>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Marek Szyprowski <m.szyprowski@samsung.com>,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
	Sylwester Nawrocki <snawrocki@kernel.org>,
	Alim Akhtar <alim.akhtar@samsung.com>,
	Chanwoo Choi <cw00.choi@samsung.com>,
	Pankaj Dubey <pankaj.dubey@samsung.com>
Subject: [PATCH v3 3/3] ARM: dts: exynos: Define fixed regulators in root node for consistency in SMDK5420
Date: Fri,  3 Jul 2020 20:44:51 +0200	[thread overview]
Message-ID: <20200703184451.19535-3-krzk@kernel.org> (raw)
In-Reply-To: <20200703184451.19535-1-krzk@kernel.org>

Remove the regulators node and define fixed regulators directly under
the root node.  This makes SMDK5420 board consistent with other Exynos
boards.

Name the fixed regulator nodes consistently.

Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

---

Changes since v2:
1. Remove also "reg" property

Changes since v1:
1. New patch
---
 arch/arm/boot/dts/exynos5420-smdk5420.dts | 53 ++++++++++-------------
 1 file changed, 22 insertions(+), 31 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index e3f2afe8359a..83fa800fa1eb 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -32,40 +32,31 @@
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd: fixed-regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "vdd-supply";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
+	vdd: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-supply";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
 
-		dbvdd: fixed-regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "dbvdd-supply";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	dbvdd: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "dbvdd-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 
-		spkvdd: fixed-regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "spkvdd-supply";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
+	spkvdd: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "spkvdd-supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
 	};
 
-	usb300_vbus_reg: regulator-usb300 {
+	usb300_vbus_reg: regulator-3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VBUS0";
 		regulator-min-microvolt = <5000000>;
@@ -76,7 +67,7 @@
 		enable-active-high;
 	};
 
-	usb301_vbus_reg: regulator-usb301 {
+	usb301_vbus_reg: regulator-4 {
 		compatible = "regulator-fixed";
 		regulator-name = "VBUS1";
 		regulator-min-microvolt = <5000000>;
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Rob Herring <robh+dt@kernel.org>, Kukjin Kim <kgene@kernel.org>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
	Sylwester Nawrocki <snawrocki@kernel.org>,
	Pankaj Dubey <pankaj.dubey@samsung.com>,
	Chanwoo Choi <cw00.choi@samsung.com>,
	Alim Akhtar <alim.akhtar@samsung.com>,
	Marek Szyprowski <m.szyprowski@samsung.com>
Subject: [PATCH v3 3/3] ARM: dts: exynos: Define fixed regulators in root node for consistency in SMDK5420
Date: Fri,  3 Jul 2020 20:44:51 +0200	[thread overview]
Message-ID: <20200703184451.19535-3-krzk@kernel.org> (raw)
In-Reply-To: <20200703184451.19535-1-krzk@kernel.org>

Remove the regulators node and define fixed regulators directly under
the root node.  This makes SMDK5420 board consistent with other Exynos
boards.

Name the fixed regulator nodes consistently.

Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

---

Changes since v2:
1. Remove also "reg" property

Changes since v1:
1. New patch
---
 arch/arm/boot/dts/exynos5420-smdk5420.dts | 53 ++++++++++-------------
 1 file changed, 22 insertions(+), 31 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index e3f2afe8359a..83fa800fa1eb 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -32,40 +32,31 @@
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd: fixed-regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "vdd-supply";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
+	vdd: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-supply";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
 
-		dbvdd: fixed-regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "dbvdd-supply";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	dbvdd: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "dbvdd-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 
-		spkvdd: fixed-regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "spkvdd-supply";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
+	spkvdd: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "spkvdd-supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
 	};
 
-	usb300_vbus_reg: regulator-usb300 {
+	usb300_vbus_reg: regulator-3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VBUS0";
 		regulator-min-microvolt = <5000000>;
@@ -76,7 +67,7 @@
 		enable-active-high;
 	};
 
-	usb301_vbus_reg: regulator-usb301 {
+	usb301_vbus_reg: regulator-4 {
 		compatible = "regulator-fixed";
 		regulator-name = "VBUS1";
 		regulator-min-microvolt = <5000000>;
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2020-07-03 18:45 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-03 18:44 [PATCH v3 1/3] ARM: dts: exynos: Define fixed regulators in root node for consistency in Origen Krzysztof Kozlowski
2020-07-03 18:44 ` Krzysztof Kozlowski
2020-07-03 18:44 ` [PATCH v3 2/3] ARM: dts: exynos: Define fixed regulators in root node for consistency in Arndale Krzysztof Kozlowski
2020-07-03 18:44   ` Krzysztof Kozlowski
2020-07-03 18:44 ` Krzysztof Kozlowski [this message]
2020-07-03 18:44   ` [PATCH v3 3/3] ARM: dts: exynos: Define fixed regulators in root node for consistency in SMDK5420 Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200703184451.19535-3-krzk@kernel.org \
    --to=krzk@kernel.org \
    --cc=alim.akhtar@samsung.com \
    --cc=b.zolnierkie@samsung.com \
    --cc=cw00.choi@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kgene@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=m.szyprowski@samsung.com \
    --cc=pankaj.dubey@samsung.com \
    --cc=robh+dt@kernel.org \
    --cc=snawrocki@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.