Re: [PATCH net] xsk: remove cheap_dma optimization

[Christoph Hellwig <hch@lst.de>]

On Mon, Jun 29, 2020 at 04:41:16PM +0100, Robin Murphy wrote:
> On 2020-06-28 18:16, Björn Töpel wrote:
>>
>> On 2020-06-27 09:04, Christoph Hellwig wrote:
>>> On Sat, Jun 27, 2020 at 01:00:19AM +0200, Daniel Borkmann wrote:
>>>> Given there is roughly a ~5 weeks window at max where this removal could
>>>> still be applied in the worst case, could we come up with a fix / 
>>>> proposal
>>>> first that moves this into the DMA mapping core? If there is something 
>>>> that
>>>> can be agreed upon by all parties, then we could avoid re-adding the 9%
>>>> slowdown. :/
>>>
>>> I'd rather turn it upside down - this abuse of the internals blocks work
>>> that has basically just missed the previous window and I'm not going
>>> to wait weeks to sort out the API misuse.  But we can add optimizations
>>> back later if we find a sane way.
>>>
>>
>> I'm not super excited about the performance loss, but I do get
>> Christoph's frustration about gutting the DMA API making it harder for
>> DMA people to get work done. Lets try to solve this properly using
>> proper DMA APIs.
>>
>>
>>> That being said I really can't see how this would make so much of a
>>> difference.  What architecture and what dma_ops are you using for
>>> those measurements?  What is the workload?
>>>
>>
>> The 9% is for an AF_XDP (Fast raw Ethernet socket. Think AF_PACKET, but 
>> faster.) benchmark: receive the packet from the NIC, and drop it. The DMA 
>> syncs stand out in the perf top:
>>
>>    28.63%  [kernel]                   [k] i40e_clean_rx_irq_zc
>>    17.12%  [kernel]                   [k] xp_alloc
>>     8.80%  [kernel]                   [k] __xsk_rcv_zc
>>     7.69%  [kernel]                   [k] xdp_do_redirect
>>     5.35%  bpf_prog_992d9ddc835e5629  [k] bpf_prog_992d9ddc835e5629
>>     4.77%  [kernel]                   [k] xsk_rcv.part.0
>>     4.07%  [kernel]                   [k] __xsk_map_redirect
>>     3.80%  [kernel]                   [k] dma_direct_sync_single_for_cpu
>>     3.03%  [kernel]                   [k] dma_direct_sync_single_for_device
>>     2.76%  [kernel]                   [k] i40e_alloc_rx_buffers_zc
>>     1.83%  [kernel]                   [k] xsk_flush
>> ...
>>
>> For this benchmark the dma_ops are NULL (dma_is_direct() == true), and
>> the main issue is that SWIOTLB is now unconditionally enabled [1] for
>> x86, and for each sync we have to check that if is_swiotlb_buffer()
>> which involves a some costly indirection.
>>
>> That was pretty much what my hack avoided. Instead we did all the checks
>> upfront, since AF_XDP has long-term DMA mappings, and just set a flag
>> for that.
>>
>> Avoiding the whole "is this address swiotlb" in
>> dma_direct_sync_single_for_{cpu, device]() per-packet
>> would help a lot.
>
> I'm pretty sure that's one of the things we hope to achieve with the 
> generic bypass flag :)
>
>> Somewhat related to the DMA API; It would have performance benefits for
>> AF_XDP if the DMA range of the mapped memory was linear, i.e. by IOMMU
>> utilization. I've started hacking a thing a little bit, but it would be
>> nice if such API was part of the mapping core.
>>
>> Input: array of pages Output: array of dma addrs (and obviously dev,
>> flags and such)
>>
>> For non-IOMMU len(array of pages) == len(array of dma addrs)
>> For best-case IOMMU len(array of dma addrs) == 1 (large linear space)
>>
>> But that's for later. :-)
>
> FWIW you will typically get that behaviour from IOMMU-based implementations 
> of dma_map_sg() right now, although it's not strictly guaranteed. If you 
> can weather some additional setup cost of calling 
> sg_alloc_table_from_pages() plus walking the list after mapping to test 
> whether you did get a contiguous result, you could start taking advantage 
> of it as some of the dma-buf code in DRM and v4l2 does already (although 
> those cases actually treat it as a strict dependency rather than an 
> optimisation).

Yikes.

> I'm inclined to agree that if we're going to see more of these cases, a new 
> API call that did formally guarantee a DMA-contiguous mapping (either via 
> IOMMU or bounce buffering) or failure might indeed be handy.

I was planning on adding a dma-level API to add more pages to an
IOMMU batch, but was waiting for at least the intel IOMMU driver to be
converted to the dma-iommu code (and preferably arm32 and s390 as well).

Here is my old pseudo-code sketch for what I was aiming for from the
block/nvme perspective.  I haven't even implemented it yet, so there might
be some holes in the design:


/*
 * Returns 0 if batching is possible, postitive number of segments required
 * if batching is not possible, or negatie values on error.
 */
int dma_map_batch_start(struct device *dev, size_t rounded_len,
	enum dma_data_direction dir, unsigned long attrs, dma_addr_t *addr);
int dma_map_batch_add(struct device *dev, dma_addr_t *addr, struct page *page,
		unsigned long offset, size_t size);
int dma_map_batch_end(struct device *dev, int ret, dma_addr_t start_addr);

int blk_dma_map_rq(struct device *dev, struct request *rq, 
		enum dma_data_direction dir, unsigned long attrs,
		dma_addr_t *start_addr, size_t *len)
{
	struct req_iterator iter;
	struct bio_vec bvec;
	dma_addr_t next_addr;
	int ret;

	if (number_of_segments(req) == 1) {
		// plain old dma_map_page();
		return 0;
	}

	// XXX: block helper for rounded_len?
	*len = length_of_request(req);
	ret = dma_map_batch_start(dev, *len, dir, attrs, start_addr);
	if (ret)
		return ret;

	next_addr = *start_addr;
	rq_for_each_segment(bvec, rq, iter) {
		ret = dma_map_batch_add(dev, &next_addr, bvec.bv_page,
				bvec.bv_offset, bvev.bv_len);
		if (ret)
			break;
	}

	return dma_map_batch_end(dev, ret, *start_addr);
}

dma_addr_t blk_dma_map_bvec(struct device *dev, struct bio_vec *bvec,
		enum dma_data_direction dir, unsigned long attrs)
{
	return dma_map_page_attrs(dev, bv_page, bvec.bv_offset, bvev.bv_len,
			dir, attrs);
}

int queue_rq()
{
	dma_addr_t addr;
	int ret;

	ret = blk_dma_map_rq(dev, rq, dir, attrs. &addr, &len);
	if (ret < 0)
		return ret;

	if (ret == 0) {
		if (use_sgl()) {
			nvme_pci_sgl_set_data(&cmd->dptr.sgl, addr, len);
		} else {
			set_prps();
		}
		return;
	}

	if (use_sgl()) {
		alloc_one_sgl_per_segment();

		rq_for_each_segment(bvec, rq, iter) {
			addr = blk_dma_map_bvec(dev, &bdev, dir, 0);
			set_one_sgl();
		}
	} else {
		alloc_one_prp_per_page();

		rq_for_each_segment(bvec, rq, iter) {
			ret = blk_dma_map_bvec(dev, &bdev, dir, 0);
			if (ret)
				break;
			set_prps();
	}
}