Re: [PATCH 1/2] dt: update Marvell Armada 38x COMPHY binding

[Russell King - ARM Linux admin <linux@armlinux.org.uk>]

Rob?

On Tue, Jun 30, 2020 at 05:05:33PM +0100, Russell King wrote:
> Update the Marvell Armada 38x COMPHY binding with an additional
> optional register pair describing the location of an undocumented
> system register controlling something to do with the Gigabit Ethernet
> and COMPHY.  There is one bit for each COMPHY lane that may be using
> the serdes, but exactly what this register does is completely unknown.
> 
> This register only appears to exist on Armada 38x devices, and not
> other SoCs using the NETA ethernet block, so it seems logical that it
> should be part of the COMPHY.
> 
> This is also how u-boot groups this register; it is dealt with as part
> of the COMPHY initialisation there.
> 
> However, at the end of the day, due to the undocumented nature of this
> register, we can only guess.
> 
> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
> ---
>  .../devicetree/bindings/phy/phy-armada38x-comphy.txt   | 10 +++++++++-
>  1 file changed, 9 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/phy/phy-armada38x-comphy.txt b/Documentation/devicetree/bindings/phy/phy-armada38x-comphy.txt
> index ad49e5c01334..8b5a7a28a35b 100644
> --- a/Documentation/devicetree/bindings/phy/phy-armada38x-comphy.txt
> +++ b/Documentation/devicetree/bindings/phy/phy-armada38x-comphy.txt
> @@ -12,6 +12,13 @@ PCIe...).
>  - #address-cells: should be 1.
>  - #size-cells: should be 0.
>  
> +Optional properties:
> +
> +- reg-names: must be "comphy" as the first name, and "conf".
> +- reg: must contain the comphy register location and length as the first
> +    pair, followed by an optional configuration register address and
> +    length pair.
> +
>  A sub-node is required for each comphy lane provided by the comphy.
>  
>  Required properties (child nodes):
> @@ -24,7 +31,8 @@ A sub-node is required for each comphy lane provided by the comphy.
>  
>  	comphy: phy@18300 {
>  		compatible = "marvell,armada-380-comphy";
> -		reg = <0x18300 0x100>;
> +		reg-names = "comphy", "conf";
> +		reg = <0x18300 0x100>, <0x18460 4>;
>  		#address-cells = <1>;
>  		#size-cells = <0>;
>  
> -- 
> 2.20.1
> 
> 

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel