All of lore.kernel.org
 help / color / mirror / Atom feed
From: Eddie James <eajames@linux.ibm.com>
To: linux-aspeed@lists.ozlabs.org
Subject: [PATCH 1/2] clk: AST2600: Add mux for EMMC clock
Date: Thu,  9 Jul 2020 14:57:05 -0500	[thread overview]
Message-ID: <20200709195706.12741-2-eajames@linux.ibm.com> (raw)
In-Reply-To: <20200709195706.12741-1-eajames@linux.ibm.com>

The EMMC clock can be derived from either the HPLL or the MPLL. Register
a clock mux so that the rate is calculated correctly based upon the
parent.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
---
 drivers/clk/clk-ast2600.c | 49 ++++++++++++++++++++++++++++++++-------
 1 file changed, 41 insertions(+), 8 deletions(-)

diff --git a/drivers/clk/clk-ast2600.c b/drivers/clk/clk-ast2600.c
index 99afc949925f..177368cac6dd 100644
--- a/drivers/clk/clk-ast2600.c
+++ b/drivers/clk/clk-ast2600.c
@@ -131,6 +131,18 @@ static const struct clk_div_table ast2600_eclk_div_table[] = {
 	{ 0 }
 };
 
+static const struct clk_div_table ast2600_emmc_extclk_div_table[] = {
+	{ 0x0, 2 },
+	{ 0x1, 4 },
+	{ 0x2, 6 },
+	{ 0x3, 8 },
+	{ 0x4, 10 },
+	{ 0x5, 12 },
+	{ 0x6, 14 },
+	{ 0x7, 16 },
+	{ 0 }
+};
+
 static const struct clk_div_table ast2600_mac_div_table[] = {
 	{ 0x0, 4 },
 	{ 0x1, 4 },
@@ -390,6 +402,11 @@ static struct clk_hw *aspeed_g6_clk_hw_register_gate(struct device *dev,
 	return hw;
 }
 
+static const char *const emmc_extclk_parent_names[] = {
+	"emmc_extclk_hpll_in",
+	"mpll",
+};
+
 static const char * const vclk_parent_names[] = {
 	"dpll",
 	"d1pll",
@@ -459,16 +476,32 @@ static int aspeed_g6_clk_probe(struct platform_device *pdev)
 		return PTR_ERR(hw);
 	aspeed_g6_clk_data->hws[ASPEED_CLK_UARTX] = hw;
 
-	/* EMMC ext clock divider */
-	hw = clk_hw_register_gate(dev, "emmc_extclk_gate", "hpll", 0,
-			scu_g6_base + ASPEED_G6_CLK_SELECTION1, 15, 0,
-			&aspeed_g6_clk_lock);
+	/* EMMC ext clock */
+	hw = clk_hw_register_fixed_factor(dev, "emmc_extclk_hpll_in", "hpll",
+					  0, 1, 2);
 	if (IS_ERR(hw))
 		return PTR_ERR(hw);
-	hw = clk_hw_register_divider_table(dev, "emmc_extclk", "emmc_extclk_gate", 0,
-			scu_g6_base + ASPEED_G6_CLK_SELECTION1, 12, 3, 0,
-			ast2600_div_table,
-			&aspeed_g6_clk_lock);
+
+	hw = clk_hw_register_mux(dev, "emmc_extclk_mux",
+				 emmc_extclk_parent_names,
+				 ARRAY_SIZE(emmc_extclk_parent_names), 0,
+				 scu_g6_base + ASPEED_G6_CLK_SELECTION1, 11, 1,
+				 0, &aspeed_g6_clk_lock);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+
+	hw = clk_hw_register_gate(dev, "emmc_extclk_gate", "emmc_extclk_mux",
+				  0, scu_g6_base + ASPEED_G6_CLK_SELECTION1,
+				  15, 0, &aspeed_g6_clk_lock);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+
+	hw = clk_hw_register_divider_table(dev, "emmc_extclk",
+					   "emmc_extclk_gate", 0,
+					   scu_g6_base +
+						ASPEED_G6_CLK_SELECTION1, 12,
+					   3, 0, ast2600_emmc_extclk_div_table,
+					   &aspeed_g6_clk_lock);
 	if (IS_ERR(hw))
 		return PTR_ERR(hw);
 	aspeed_g6_clk_data->hws[ASPEED_CLK_EMMC] = hw;
-- 
2.24.0


WARNING: multiple messages have this Message-ID (diff)
From: Eddie James <eajames@linux.ibm.com>
To: linux-clk@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, linux-aspeed@lists.ozlabs.org,
	linux-mmc@vger.kernel.org, andrew@aj.id.au, joel@jms.id.au,
	ulf.hansson@linaro.org, adrian.hunter@intel.com,
	sboyd@kernel.org, mturquette@baylibre.com, eajames@linux.ibm.com
Subject: [PATCH 1/2] clk: AST2600: Add mux for EMMC clock
Date: Thu,  9 Jul 2020 14:57:05 -0500	[thread overview]
Message-ID: <20200709195706.12741-2-eajames@linux.ibm.com> (raw)
In-Reply-To: <20200709195706.12741-1-eajames@linux.ibm.com>

The EMMC clock can be derived from either the HPLL or the MPLL. Register
a clock mux so that the rate is calculated correctly based upon the
parent.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
---
 drivers/clk/clk-ast2600.c | 49 ++++++++++++++++++++++++++++++++-------
 1 file changed, 41 insertions(+), 8 deletions(-)

diff --git a/drivers/clk/clk-ast2600.c b/drivers/clk/clk-ast2600.c
index 99afc949925f..177368cac6dd 100644
--- a/drivers/clk/clk-ast2600.c
+++ b/drivers/clk/clk-ast2600.c
@@ -131,6 +131,18 @@ static const struct clk_div_table ast2600_eclk_div_table[] = {
 	{ 0 }
 };
 
+static const struct clk_div_table ast2600_emmc_extclk_div_table[] = {
+	{ 0x0, 2 },
+	{ 0x1, 4 },
+	{ 0x2, 6 },
+	{ 0x3, 8 },
+	{ 0x4, 10 },
+	{ 0x5, 12 },
+	{ 0x6, 14 },
+	{ 0x7, 16 },
+	{ 0 }
+};
+
 static const struct clk_div_table ast2600_mac_div_table[] = {
 	{ 0x0, 4 },
 	{ 0x1, 4 },
@@ -390,6 +402,11 @@ static struct clk_hw *aspeed_g6_clk_hw_register_gate(struct device *dev,
 	return hw;
 }
 
+static const char *const emmc_extclk_parent_names[] = {
+	"emmc_extclk_hpll_in",
+	"mpll",
+};
+
 static const char * const vclk_parent_names[] = {
 	"dpll",
 	"d1pll",
@@ -459,16 +476,32 @@ static int aspeed_g6_clk_probe(struct platform_device *pdev)
 		return PTR_ERR(hw);
 	aspeed_g6_clk_data->hws[ASPEED_CLK_UARTX] = hw;
 
-	/* EMMC ext clock divider */
-	hw = clk_hw_register_gate(dev, "emmc_extclk_gate", "hpll", 0,
-			scu_g6_base + ASPEED_G6_CLK_SELECTION1, 15, 0,
-			&aspeed_g6_clk_lock);
+	/* EMMC ext clock */
+	hw = clk_hw_register_fixed_factor(dev, "emmc_extclk_hpll_in", "hpll",
+					  0, 1, 2);
 	if (IS_ERR(hw))
 		return PTR_ERR(hw);
-	hw = clk_hw_register_divider_table(dev, "emmc_extclk", "emmc_extclk_gate", 0,
-			scu_g6_base + ASPEED_G6_CLK_SELECTION1, 12, 3, 0,
-			ast2600_div_table,
-			&aspeed_g6_clk_lock);
+
+	hw = clk_hw_register_mux(dev, "emmc_extclk_mux",
+				 emmc_extclk_parent_names,
+				 ARRAY_SIZE(emmc_extclk_parent_names), 0,
+				 scu_g6_base + ASPEED_G6_CLK_SELECTION1, 11, 1,
+				 0, &aspeed_g6_clk_lock);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+
+	hw = clk_hw_register_gate(dev, "emmc_extclk_gate", "emmc_extclk_mux",
+				  0, scu_g6_base + ASPEED_G6_CLK_SELECTION1,
+				  15, 0, &aspeed_g6_clk_lock);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+
+	hw = clk_hw_register_divider_table(dev, "emmc_extclk",
+					   "emmc_extclk_gate", 0,
+					   scu_g6_base +
+						ASPEED_G6_CLK_SELECTION1, 12,
+					   3, 0, ast2600_emmc_extclk_div_table,
+					   &aspeed_g6_clk_lock);
 	if (IS_ERR(hw))
 		return PTR_ERR(hw);
 	aspeed_g6_clk_data->hws[ASPEED_CLK_EMMC] = hw;
-- 
2.24.0


  reply	other threads:[~2020-07-09 19:57 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-09 19:57 [PATCH 0/2] clk: Aspeed: Fix eMMC clock speeds Eddie James
2020-07-09 19:57 ` Eddie James
2020-07-09 19:57 ` Eddie James [this message]
2020-07-09 19:57   ` [PATCH 1/2] clk: AST2600: Add mux for EMMC clock Eddie James
2020-07-10  3:03   ` Joel Stanley
2020-07-10  3:03     ` Joel Stanley
2020-07-11 16:16   ` Stephen Boyd
2020-07-11 16:16     ` Stephen Boyd
2020-07-09 19:57 ` [PATCH 2/2] mmc: sdhci-of-aspeed: Fix clock divider calculation Eddie James
2020-07-09 19:57   ` Eddie James
2020-07-10  1:13   ` Andrew Jeffery
2020-07-10  1:13     ` Andrew Jeffery
2020-07-10  3:04     ` Joel Stanley
2020-07-10  3:04       ` Joel Stanley
2020-07-10  6:41   ` Adrian Hunter
2020-07-10  6:41     ` Adrian Hunter
2020-07-10  7:39   ` Ulf Hansson
2020-07-10  7:39     ` Ulf Hansson
2020-07-10  9:00     ` Andrew Jeffery
2020-07-10  9:00       ` Andrew Jeffery
2020-07-10  9:27   ` Ulf Hansson
2020-07-10  9:27     ` Ulf Hansson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200709195706.12741-2-eajames@linux.ibm.com \
    --to=eajames@linux.ibm.com \
    --cc=linux-aspeed@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.