All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ondrej Jirman <megous@megous.com>
To: linux-sunxi@googlegroups.com,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>
Cc: Ondrej Jirman <megous@megous.com>, Luca Weiss <luca@z3ntu.xyz>,
	Tomas Novotny <tomas@novotny.cz>,
	linux-input@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Rob Herring <robh@kernel.org>
Subject: [PATCH v4 1/4] dt-bindings: input: gpio-vibrator: Don't require enable-gpios
Date: Tue, 14 Jul 2020 12:23:00 +0200	[thread overview]
Message-ID: <20200714102303.3007896-2-megous@megous.com> (raw)
In-Reply-To: <20200714102303.3007896-1-megous@megous.com>

It is possible to turn the motor on/off just by enabling/disabling
the vcc-supply. Change the binding to require either enable-gpios
or vcc-supply or both.

Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/input/gpio-vibrator.yaml | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
index 2384465eaa19..082ac06471db 100644
--- a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
+++ b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
@@ -24,7 +24,12 @@ properties:
 
 required:
   - compatible
-  - enable-gpios
+
+anyOf:
+  - required:
+    - enable-gpios
+  - required:
+    - vcc-supply
 
 additionalProperties: false
 
-- 
2.27.0


WARNING: multiple messages have this Message-ID (diff)
From: Ondrej Jirman <megous@megous.com>
To: linux-sunxi@googlegroups.com,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>
Cc: Ondrej Jirman <megous@megous.com>,
	devicetree@vger.kernel.org, Rob Herring <robh@kernel.org>,
	linux-kernel@vger.kernel.org, Luca Weiss <luca@z3ntu.xyz>,
	Tomas Novotny <tomas@novotny.cz>,
	linux-input@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 1/4] dt-bindings: input: gpio-vibrator: Don't require enable-gpios
Date: Tue, 14 Jul 2020 12:23:00 +0200	[thread overview]
Message-ID: <20200714102303.3007896-2-megous@megous.com> (raw)
In-Reply-To: <20200714102303.3007896-1-megous@megous.com>

It is possible to turn the motor on/off just by enabling/disabling
the vcc-supply. Change the binding to require either enable-gpios
or vcc-supply or both.

Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/input/gpio-vibrator.yaml | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
index 2384465eaa19..082ac06471db 100644
--- a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
+++ b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
@@ -24,7 +24,12 @@ properties:
 
 required:
   - compatible
-  - enable-gpios
+
+anyOf:
+  - required:
+    - enable-gpios
+  - required:
+    - vcc-supply
 
 additionalProperties: false
 
-- 
2.27.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2020-07-14 10:23 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-14 10:22 [PATCH v4 0/4] Add support for vibrator motor for TBS A711 Tablet Ondrej Jirman
2020-07-14 10:22 ` Ondrej Jirman
2020-07-14 10:23 ` Ondrej Jirman [this message]
2020-07-14 10:23   ` [PATCH v4 1/4] dt-bindings: input: gpio-vibrator: Don't require enable-gpios Ondrej Jirman
2020-07-14 10:23 ` [PATCH v4 2/4] input: gpio-vibra: Allow to use vcc-supply alone to control the vibrator Ondrej Jirman
2020-07-14 10:23   ` Ondrej Jirman
2020-07-30  6:19   ` Dmitry Torokhov
2020-07-30  6:19     ` Dmitry Torokhov
2020-07-30  9:18     ` Ondřej Jirman
2020-07-30  9:18       ` Ondřej Jirman
2020-07-14 10:23 ` [PATCH v4 3/4] ARM: dts: sun8i-a83t-tbs-a711: Add support for the vibrator motor Ondrej Jirman
2020-07-14 10:23   ` Ondrej Jirman
2020-07-14 10:23 ` [PATCH v4 4/4] ARM: dts: sun8i-a83t-tbs-a711: Increase voltage on the vibrator Ondrej Jirman
2020-07-14 10:23   ` Ondrej Jirman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200714102303.3007896-2-megous@megous.com \
    --to=megous@megous.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=luca@z3ntu.xyz \
    --cc=mark.rutland@arm.com \
    --cc=mripard@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=robh@kernel.org \
    --cc=tomas@novotny.cz \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.