From: Maxim Levitsky <mlevitsk@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: Keith Busch <kbusch@kernel.org>,
Josef Bacik <josef@toxicpanda.com>,
linux-block@vger.kernel.org (open list:BLOCK LAYER),
Sagi Grimberg <sagi@grimberg.me>, Jens Axboe <axboe@kernel.dk>,
linux-nvme@lists.infradead.org (open list:NVM EXPRESS DRIVER),
linux-scsi@vger.kernel.org (open list:SCSI CDROM DRIVER),
Tejun Heo <tj@kernel.org>, Bart Van Assche <bvanassche@acm.org>,
"Martin K. Petersen" <martin.petersen@oracle.com>,
Damien Le Moal <damien.lemoal@wdc.com>,
Jason Wang <jasowang@redhat.com>,
Maxim Levitsky <maximlevitsky@gmail.com>,
Stefan Hajnoczi <stefanha@redhat.com>,
Colin Ian King <colin.king@canonical.com>,
"Michael S. Tsirkin" <mst@redhat.com>,
Paolo Bonzini <pbonzini@redhat.com>,
Ulf Hansson <ulf.hansson@linaro.org>,
Ajay Joshi <ajay.joshi@wdc.com>, Ming Lei <ming.lei@redhat.com>,
linux-mmc@vger.kernel.org (open list:SONY MEMORYSTICK SUBSYSTEM),
Christoph Hellwig <hch@lst.de>,
Satya Tangirala <satyat@google.com>,
nbd@other.debian.org (open list:NETWORK BLOCK DEVICE (NBD)),
Hou Tao <houtao1@huawei.com>, Jens Axboe <axboe@fb.com>,
virtualization@lists.linux-foundation.org (open list:VIRTIO CORE
AND NET DRIVERS), "James E.J. Bottomley" <jejb@linux.ibm.com>,
Alex Dubov <oakad@yahoo.com>,
Maxim Levitsky <mlevitsk@redhat.com>
Subject: [PATCH 03/10] block: loop: use blk_is_valid_logical_block_size
Date: Tue, 21 Jul 2020 13:52:32 +0300 [thread overview]
Message-ID: <20200721105239.8270-4-mlevitsk@redhat.com> (raw)
In-Reply-To: <20200721105239.8270-1-mlevitsk@redhat.com>
This allows to remove loop's own check for supported block size
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
---
drivers/block/loop.c | 23 +++++------------------
1 file changed, 5 insertions(+), 18 deletions(-)
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index 475e1a738560d..9984c8f824271 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -228,19 +228,6 @@ static void __loop_update_dio(struct loop_device *lo, bool dio)
blk_mq_unfreeze_queue(lo->lo_queue);
}
-/**
- * loop_validate_block_size() - validates the passed in block size
- * @bsize: size to validate
- */
-static int
-loop_validate_block_size(unsigned short bsize)
-{
- if (bsize < 512 || bsize > PAGE_SIZE || !is_power_of_2(bsize))
- return -EINVAL;
-
- return 0;
-}
-
/**
* loop_set_size() - sets device size and notifies userspace
* @lo: struct loop_device to set the size for
@@ -1119,9 +1106,10 @@ static int loop_configure(struct loop_device *lo, fmode_t mode,
}
if (config->block_size) {
- error = loop_validate_block_size(config->block_size);
- if (error)
+ if (!blk_is_valid_logical_block_size(config->block_size)) {
+ error = -EINVAL;
goto out_unlock;
+ }
}
error = loop_set_status_from_info(lo, &config->info);
@@ -1607,9 +1595,8 @@ static int loop_set_block_size(struct loop_device *lo, unsigned long arg)
if (lo->lo_state != Lo_bound)
return -ENXIO;
- err = loop_validate_block_size(arg);
- if (err)
- return err;
+ if (!blk_is_valid_logical_block_size(arg))
+ return -EINVAL;
if (lo->lo_queue->limits.logical_block_size == arg)
return 0;
--
2.26.2
WARNING: multiple messages have this Message-ID (diff)
From: Maxim Levitsky <mlevitsk@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: Keith Busch <kbusch@kernel.org>,
Josef Bacik <josef@toxicpanda.com>,
"open list:BLOCK LAYER" <linux-block@vger.kernel.org>,
Sagi Grimberg <sagi@grimberg.me>, Jens Axboe <axboe@kernel.dk>,
"open list:NVM EXPRESS DRIVER" <linux-nvme@lists.infradead.org>,
"open list:SCSI CDROM DRIVER" <linux-scsi@vger.kernel.org>,
Tejun Heo <tj@kernel.org>, Bart Van Assche <bvanassche@acm.org>,
"Martin K. Petersen" <martin.petersen@oracle.com>,
Damien Le Moal <damien.lemoal@wdc.com>,
Jason Wang <jasowang@redhat.com>,
Maxim Levitsky <maximlevitsky@gmail.com>,
Stefan Hajnoczi <stefanha@redhat.com>,
Colin Ian King <colin.king@canonical.com>,
"Michael S. Tsirkin" <mst@redhat.com>,
Paolo Bonzini <pbonzini@redhat.com>,
Ulf Hansson <ulf.hansson@linaro.org>, Ajay Joshi <ajay.joshi@wd>
Subject: [PATCH 03/10] block: loop: use blk_is_valid_logical_block_size
Date: Tue, 21 Jul 2020 13:52:32 +0300 [thread overview]
Message-ID: <20200721105239.8270-4-mlevitsk@redhat.com> (raw)
In-Reply-To: <20200721105239.8270-1-mlevitsk@redhat.com>
This allows to remove loop's own check for supported block size
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
---
drivers/block/loop.c | 23 +++++------------------
1 file changed, 5 insertions(+), 18 deletions(-)
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index 475e1a738560d..9984c8f824271 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -228,19 +228,6 @@ static void __loop_update_dio(struct loop_device *lo, bool dio)
blk_mq_unfreeze_queue(lo->lo_queue);
}
-/**
- * loop_validate_block_size() - validates the passed in block size
- * @bsize: size to validate
- */
-static int
-loop_validate_block_size(unsigned short bsize)
-{
- if (bsize < 512 || bsize > PAGE_SIZE || !is_power_of_2(bsize))
- return -EINVAL;
-
- return 0;
-}
-
/**
* loop_set_size() - sets device size and notifies userspace
* @lo: struct loop_device to set the size for
@@ -1119,9 +1106,10 @@ static int loop_configure(struct loop_device *lo, fmode_t mode,
}
if (config->block_size) {
- error = loop_validate_block_size(config->block_size);
- if (error)
+ if (!blk_is_valid_logical_block_size(config->block_size)) {
+ error = -EINVAL;
goto out_unlock;
+ }
}
error = loop_set_status_from_info(lo, &config->info);
@@ -1607,9 +1595,8 @@ static int loop_set_block_size(struct loop_device *lo, unsigned long arg)
if (lo->lo_state != Lo_bound)
return -ENXIO;
- err = loop_validate_block_size(arg);
- if (err)
- return err;
+ if (!blk_is_valid_logical_block_size(arg))
+ return -EINVAL;
if (lo->lo_queue->limits.logical_block_size == arg)
return 0;
--
2.26.2
next prev parent reply other threads:[~2020-07-21 10:54 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-21 10:52 [PATCH 00/10] RFC: move logical block size checking to the block core Maxim Levitsky
2020-07-21 10:52 ` Maxim Levitsky
2020-07-21 10:52 ` [PATCH 01/10] block: introduce blk_is_valid_logical_block_size Maxim Levitsky
2020-07-21 10:52 ` Maxim Levitsky
2020-07-21 11:05 ` Damien Le Moal
2020-07-21 11:05 ` Damien Le Moal
2020-07-21 11:09 ` Maxim Levitsky
2020-07-21 11:09 ` Maxim Levitsky
2020-07-21 11:31 ` Damien Le Moal
2020-07-21 11:31 ` Damien Le Moal
2020-07-21 15:13 ` Christoph Hellwig
2020-07-21 15:13 ` Christoph Hellwig
2020-07-22 8:50 ` Maxim Levitsky
2020-07-22 8:50 ` Maxim Levitsky
2020-07-23 9:13 ` [block] 4c873fbf07: WARNING:at_block/blk-settings.c:#blk_queue_logical_block_size kernel test robot
2020-07-23 9:13 ` kernel test robot
2020-07-21 10:52 ` [PATCH 02/10] block: virtio-blk: check logical block size Maxim Levitsky
2020-07-21 10:52 ` Maxim Levitsky
2020-07-21 11:07 ` Damien Le Moal
2020-07-21 11:07 ` Damien Le Moal
2020-07-21 15:14 ` Christoph Hellwig
2020-07-21 15:14 ` Christoph Hellwig
2020-07-22 2:55 ` Martin K. Petersen
2020-07-22 2:55 ` Martin K. Petersen
2020-07-22 9:11 ` Maxim Levitsky
2020-07-22 9:11 ` Maxim Levitsky
2020-07-28 14:27 ` Maxim Levitsky
2020-07-29 4:32 ` Martin K. Petersen
2020-07-28 15:44 ` Stefan Hajnoczi
2020-07-21 10:52 ` Maxim Levitsky [this message]
2020-07-21 10:52 ` [PATCH 03/10] block: loop: use blk_is_valid_logical_block_size Maxim Levitsky
2020-07-21 11:08 ` Damien Le Moal
2020-07-21 11:08 ` Damien Le Moal
2020-07-21 10:52 ` [PATCH 04/10] block: nbd: " Maxim Levitsky
2020-07-21 10:52 ` Maxim Levitsky
2020-07-21 11:09 ` Damien Le Moal
2020-07-21 11:09 ` Damien Le Moal
2020-07-21 10:52 ` [PATCH 05/10] block: null: " Maxim Levitsky
2020-07-21 10:52 ` Maxim Levitsky
2020-07-21 11:15 ` Damien Le Moal
2020-07-21 11:15 ` Damien Le Moal
2020-07-21 12:42 ` Maxim Levitsky
2020-07-21 12:42 ` Maxim Levitsky
2020-07-21 10:52 ` [PATCH 06/10] block: ms_block: " Maxim Levitsky
2020-07-21 10:52 ` Maxim Levitsky
2020-07-21 11:17 ` Damien Le Moal
2020-07-21 11:17 ` Damien Le Moal
2020-07-21 10:52 ` [PATCH 07/10] block: mspro_blk: " Maxim Levitsky
2020-07-21 10:52 ` Maxim Levitsky
2020-07-21 11:17 ` Damien Le Moal
2020-07-21 11:17 ` Damien Le Moal
2020-07-21 10:52 ` [PATCH 08/10] block: nvme: " Maxim Levitsky
2020-07-21 10:52 ` Maxim Levitsky
2020-07-21 11:23 ` Damien Le Moal
2020-07-21 11:23 ` Damien Le Moal
2020-07-21 10:52 ` [PATCH 09/10] block: scsi: sd: " Maxim Levitsky
2020-07-21 10:52 ` Maxim Levitsky
2020-07-21 11:25 ` Damien Le Moal
2020-07-21 11:25 ` Damien Le Moal
2020-07-21 12:55 ` Maxim Levitsky
2020-07-21 12:55 ` Maxim Levitsky
2020-07-21 10:52 ` [PATCH 10/10] block: scsi: sr: " Maxim Levitsky
2020-07-21 10:52 ` Maxim Levitsky
2020-07-21 11:29 ` Damien Le Moal
2020-07-21 11:29 ` Damien Le Moal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200721105239.8270-4-mlevitsk@redhat.com \
--to=mlevitsk@redhat.com \
--cc=ajay.joshi@wdc.com \
--cc=axboe@fb.com \
--cc=axboe@kernel.dk \
--cc=bvanassche@acm.org \
--cc=colin.king@canonical.com \
--cc=damien.lemoal@wdc.com \
--cc=hch@lst.de \
--cc=houtao1@huawei.com \
--cc=jasowang@redhat.com \
--cc=jejb@linux.ibm.com \
--cc=josef@toxicpanda.com \
--cc=kbusch@kernel.org \
--cc=linux-block@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-nvme@lists.infradead.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=maximlevitsky@gmail.com \
--cc=ming.lei@redhat.com \
--cc=mst@redhat.com \
--cc=nbd@other.debian.org \
--cc=oakad@yahoo.com \
--cc=pbonzini@redhat.com \
--cc=sagi@grimberg.me \
--cc=satyat@google.com \
--cc=stefanha@redhat.com \
--cc=tj@kernel.org \
--cc=ulf.hansson@linaro.org \
--cc=virtualization@lists.linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.