From: Frank Wunderlich <linux@fw-web.de>
To: linux-mediatek@lists.infradead.org
Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
Frank Wunderlich <frank-w@public-files.de>,
David Airlie <airlied@linux.ie>,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
Daniel Vetter <daniel@ffwll.ch>,
Matthias Brugger <matthias.bgg@gmail.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 1/6] dt-bindings: mediatek: add mt7623 display-nodes
Date: Tue, 4 Aug 2020 18:55:49 +0200 [thread overview]
Message-ID: <20200804165555.75159-2-linux@fw-web.de> (raw)
In-Reply-To: <20200804165555.75159-1-linux@fw-web.de>
From: Frank Wunderlich <frank-w@public-files.de>
mt7623 uses mt2701/mt8173 for drm, but have own compatibles
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
.../devicetree/bindings/display/mediatek/mediatek,disp.txt | 2 +-
.../devicetree/bindings/display/mediatek/mediatek,dpi.txt | 2 +-
.../devicetree/bindings/display/mediatek/mediatek,dsi.txt | 4 ++--
.../devicetree/bindings/display/mediatek/mediatek,hdmi.txt | 4 ++++
4 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
index b91e709db7a4..121220745d46 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
@@ -43,7 +43,7 @@ Required properties (all function blocks):
"mediatek,<chip>-dpi" - DPI controller, see mediatek,dpi.txt
"mediatek,<chip>-disp-mutex" - display mutex
"mediatek,<chip>-disp-od" - overdrive
- the supported chips are mt2701, mt2712 and mt8173.
+ the supported chips are mt2701, mt7623, mt2712 and mt8173.
- reg: Physical base address and length of the function block register space
- interrupts: The interrupt signal from the function block (required, except for
merge and split function blocks).
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
index 77def4456706..dc1ebd13cc88 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
@@ -7,7 +7,7 @@ output bus.
Required properties:
- compatible: "mediatek,<chip>-dpi"
- the supported chips are mt2701 , mt8173 and mt8183.
+ the supported chips are mt2701, mt7623, mt8173 and mt8183.
- reg: Physical base address and length of the controller's registers
- interrupts: The interrupt signal from the function block.
- clocks: device clocks
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
index 8e4729de8c85..f06f24d405a5 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
@@ -7,7 +7,7 @@ channel output.
Required properties:
- compatible: "mediatek,<chip>-dsi"
- the supported chips are mt2701, mt8173 and mt8183.
+- the supported chips are mt2701, mt7623, mt8173 and mt8183.
- reg: Physical base address and length of the controller's registers
- interrupts: The interrupt signal from the function block.
- clocks: device clocks
@@ -26,7 +26,7 @@ The MIPI TX configuration module controls the MIPI D-PHY.
Required properties:
- compatible: "mediatek,<chip>-mipi-tx"
- the supported chips are mt2701, mt8173 and mt8183.
+- the supported chips are mt2701, 7623, mt8173 and mt8183.
- reg: Physical base address and length of the controller's registers
- clocks: PLL reference clock
- clock-output-names: name of the output clock line to the DSI encoder
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt
index 7b124242b0c5..6b1c586403e4 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt
@@ -6,6 +6,7 @@ its parallel input.
Required properties:
- compatible: Should be "mediatek,<chip>-hdmi".
+- the supported chips are mt2701, mt7623 and mt8173
- reg: Physical base address and length of the controller's registers
- interrupts: The interrupt signal from the function block.
- clocks: device clocks
@@ -32,6 +33,7 @@ The HDMI CEC controller handles hotplug detection and CEC communication.
Required properties:
- compatible: Should be "mediatek,<chip>-cec"
+- the supported chips are mt7623 and mt8173
- reg: Physical base address and length of the controller's registers
- interrupts: The interrupt signal from the function block.
- clocks: device clock
@@ -44,6 +46,7 @@ The Mediatek's I2C controller is used to interface with I2C devices.
Required properties:
- compatible: Should be "mediatek,<chip>-hdmi-ddc"
+- the supported chips are mt7623 and mt8173
- reg: Physical base address and length of the controller's registers
- clocks: device clock
- clock-names: Should be "ddc-i2c".
@@ -56,6 +59,7 @@ output and drives the HDMI pads.
Required properties:
- compatible: "mediatek,<chip>-hdmi-phy"
+- the supported chips are mt2701, mt7623 and mt8173
- reg: Physical base address and length of the module's registers
- clocks: PLL reference clock
- clock-names: must contain "pll_ref"
--
2.25.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
WARNING: multiple messages have this Message-ID (diff)
From: Frank Wunderlich <linux@fw-web.de>
To: linux-mediatek@lists.infradead.org
Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
Frank Wunderlich <frank-w@public-files.de>,
David Airlie <airlied@linux.ie>,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
Daniel Vetter <daniel@ffwll.ch>,
Matthias Brugger <matthias.bgg@gmail.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 1/6] dt-bindings: mediatek: add mt7623 display-nodes
Date: Tue, 4 Aug 2020 18:55:49 +0200 [thread overview]
Message-ID: <20200804165555.75159-2-linux@fw-web.de> (raw)
In-Reply-To: <20200804165555.75159-1-linux@fw-web.de>
From: Frank Wunderlich <frank-w@public-files.de>
mt7623 uses mt2701/mt8173 for drm, but have own compatibles
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
.../devicetree/bindings/display/mediatek/mediatek,disp.txt | 2 +-
.../devicetree/bindings/display/mediatek/mediatek,dpi.txt | 2 +-
.../devicetree/bindings/display/mediatek/mediatek,dsi.txt | 4 ++--
.../devicetree/bindings/display/mediatek/mediatek,hdmi.txt | 4 ++++
4 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
index b91e709db7a4..121220745d46 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
@@ -43,7 +43,7 @@ Required properties (all function blocks):
"mediatek,<chip>-dpi" - DPI controller, see mediatek,dpi.txt
"mediatek,<chip>-disp-mutex" - display mutex
"mediatek,<chip>-disp-od" - overdrive
- the supported chips are mt2701, mt2712 and mt8173.
+ the supported chips are mt2701, mt7623, mt2712 and mt8173.
- reg: Physical base address and length of the function block register space
- interrupts: The interrupt signal from the function block (required, except for
merge and split function blocks).
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
index 77def4456706..dc1ebd13cc88 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
@@ -7,7 +7,7 @@ output bus.
Required properties:
- compatible: "mediatek,<chip>-dpi"
- the supported chips are mt2701 , mt8173 and mt8183.
+ the supported chips are mt2701, mt7623, mt8173 and mt8183.
- reg: Physical base address and length of the controller's registers
- interrupts: The interrupt signal from the function block.
- clocks: device clocks
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
index 8e4729de8c85..f06f24d405a5 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
@@ -7,7 +7,7 @@ channel output.
Required properties:
- compatible: "mediatek,<chip>-dsi"
- the supported chips are mt2701, mt8173 and mt8183.
+- the supported chips are mt2701, mt7623, mt8173 and mt8183.
- reg: Physical base address and length of the controller's registers
- interrupts: The interrupt signal from the function block.
- clocks: device clocks
@@ -26,7 +26,7 @@ The MIPI TX configuration module controls the MIPI D-PHY.
Required properties:
- compatible: "mediatek,<chip>-mipi-tx"
- the supported chips are mt2701, mt8173 and mt8183.
+- the supported chips are mt2701, 7623, mt8173 and mt8183.
- reg: Physical base address and length of the controller's registers
- clocks: PLL reference clock
- clock-output-names: name of the output clock line to the DSI encoder
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt
index 7b124242b0c5..6b1c586403e4 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt
@@ -6,6 +6,7 @@ its parallel input.
Required properties:
- compatible: Should be "mediatek,<chip>-hdmi".
+- the supported chips are mt2701, mt7623 and mt8173
- reg: Physical base address and length of the controller's registers
- interrupts: The interrupt signal from the function block.
- clocks: device clocks
@@ -32,6 +33,7 @@ The HDMI CEC controller handles hotplug detection and CEC communication.
Required properties:
- compatible: Should be "mediatek,<chip>-cec"
+- the supported chips are mt7623 and mt8173
- reg: Physical base address and length of the controller's registers
- interrupts: The interrupt signal from the function block.
- clocks: device clock
@@ -44,6 +46,7 @@ The Mediatek's I2C controller is used to interface with I2C devices.
Required properties:
- compatible: Should be "mediatek,<chip>-hdmi-ddc"
+- the supported chips are mt7623 and mt8173
- reg: Physical base address and length of the controller's registers
- clocks: device clock
- clock-names: Should be "ddc-i2c".
@@ -56,6 +59,7 @@ output and drives the HDMI pads.
Required properties:
- compatible: "mediatek,<chip>-hdmi-phy"
+- the supported chips are mt2701, mt7623 and mt8173
- reg: Physical base address and length of the module's registers
- clocks: PLL reference clock
- clock-names: must contain "pll_ref"
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Frank Wunderlich <linux@fw-web.de>
To: linux-mediatek@lists.infradead.org
Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>,
Frank Wunderlich <frank-w@public-files.de>,
David Airlie <airlied@linux.ie>,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
Matthias Brugger <matthias.bgg@gmail.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 1/6] dt-bindings: mediatek: add mt7623 display-nodes
Date: Tue, 4 Aug 2020 18:55:49 +0200 [thread overview]
Message-ID: <20200804165555.75159-2-linux@fw-web.de> (raw)
In-Reply-To: <20200804165555.75159-1-linux@fw-web.de>
From: Frank Wunderlich <frank-w@public-files.de>
mt7623 uses mt2701/mt8173 for drm, but have own compatibles
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
.../devicetree/bindings/display/mediatek/mediatek,disp.txt | 2 +-
.../devicetree/bindings/display/mediatek/mediatek,dpi.txt | 2 +-
.../devicetree/bindings/display/mediatek/mediatek,dsi.txt | 4 ++--
.../devicetree/bindings/display/mediatek/mediatek,hdmi.txt | 4 ++++
4 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
index b91e709db7a4..121220745d46 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
@@ -43,7 +43,7 @@ Required properties (all function blocks):
"mediatek,<chip>-dpi" - DPI controller, see mediatek,dpi.txt
"mediatek,<chip>-disp-mutex" - display mutex
"mediatek,<chip>-disp-od" - overdrive
- the supported chips are mt2701, mt2712 and mt8173.
+ the supported chips are mt2701, mt7623, mt2712 and mt8173.
- reg: Physical base address and length of the function block register space
- interrupts: The interrupt signal from the function block (required, except for
merge and split function blocks).
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
index 77def4456706..dc1ebd13cc88 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
@@ -7,7 +7,7 @@ output bus.
Required properties:
- compatible: "mediatek,<chip>-dpi"
- the supported chips are mt2701 , mt8173 and mt8183.
+ the supported chips are mt2701, mt7623, mt8173 and mt8183.
- reg: Physical base address and length of the controller's registers
- interrupts: The interrupt signal from the function block.
- clocks: device clocks
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
index 8e4729de8c85..f06f24d405a5 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
@@ -7,7 +7,7 @@ channel output.
Required properties:
- compatible: "mediatek,<chip>-dsi"
- the supported chips are mt2701, mt8173 and mt8183.
+- the supported chips are mt2701, mt7623, mt8173 and mt8183.
- reg: Physical base address and length of the controller's registers
- interrupts: The interrupt signal from the function block.
- clocks: device clocks
@@ -26,7 +26,7 @@ The MIPI TX configuration module controls the MIPI D-PHY.
Required properties:
- compatible: "mediatek,<chip>-mipi-tx"
- the supported chips are mt2701, mt8173 and mt8183.
+- the supported chips are mt2701, 7623, mt8173 and mt8183.
- reg: Physical base address and length of the controller's registers
- clocks: PLL reference clock
- clock-output-names: name of the output clock line to the DSI encoder
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt
index 7b124242b0c5..6b1c586403e4 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt
@@ -6,6 +6,7 @@ its parallel input.
Required properties:
- compatible: Should be "mediatek,<chip>-hdmi".
+- the supported chips are mt2701, mt7623 and mt8173
- reg: Physical base address and length of the controller's registers
- interrupts: The interrupt signal from the function block.
- clocks: device clocks
@@ -32,6 +33,7 @@ The HDMI CEC controller handles hotplug detection and CEC communication.
Required properties:
- compatible: Should be "mediatek,<chip>-cec"
+- the supported chips are mt7623 and mt8173
- reg: Physical base address and length of the controller's registers
- interrupts: The interrupt signal from the function block.
- clocks: device clock
@@ -44,6 +46,7 @@ The Mediatek's I2C controller is used to interface with I2C devices.
Required properties:
- compatible: Should be "mediatek,<chip>-hdmi-ddc"
+- the supported chips are mt7623 and mt8173
- reg: Physical base address and length of the controller's registers
- clocks: device clock
- clock-names: Should be "ddc-i2c".
@@ -56,6 +59,7 @@ output and drives the HDMI pads.
Required properties:
- compatible: "mediatek,<chip>-hdmi-phy"
+- the supported chips are mt2701, mt7623 and mt8173
- reg: Physical base address and length of the module's registers
- clocks: PLL reference clock
- clock-names: must contain "pll_ref"
--
2.25.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
WARNING: multiple messages have this Message-ID (diff)
From: Frank Wunderlich <linux@fw-web.de>
To: linux-mediatek@lists.infradead.org
Cc: Frank Wunderlich <frank-w@public-files.de>,
Chun-Kuang Hu <chunkuang.hu@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
Matthias Brugger <matthias.bgg@gmail.com>,
dri-devel@lists.freedesktop.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v4 1/6] dt-bindings: mediatek: add mt7623 display-nodes
Date: Tue, 4 Aug 2020 18:55:49 +0200 [thread overview]
Message-ID: <20200804165555.75159-2-linux@fw-web.de> (raw)
In-Reply-To: <20200804165555.75159-1-linux@fw-web.de>
From: Frank Wunderlich <frank-w@public-files.de>
mt7623 uses mt2701/mt8173 for drm, but have own compatibles
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
.../devicetree/bindings/display/mediatek/mediatek,disp.txt | 2 +-
.../devicetree/bindings/display/mediatek/mediatek,dpi.txt | 2 +-
.../devicetree/bindings/display/mediatek/mediatek,dsi.txt | 4 ++--
.../devicetree/bindings/display/mediatek/mediatek,hdmi.txt | 4 ++++
4 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
index b91e709db7a4..121220745d46 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
@@ -43,7 +43,7 @@ Required properties (all function blocks):
"mediatek,<chip>-dpi" - DPI controller, see mediatek,dpi.txt
"mediatek,<chip>-disp-mutex" - display mutex
"mediatek,<chip>-disp-od" - overdrive
- the supported chips are mt2701, mt2712 and mt8173.
+ the supported chips are mt2701, mt7623, mt2712 and mt8173.
- reg: Physical base address and length of the function block register space
- interrupts: The interrupt signal from the function block (required, except for
merge and split function blocks).
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
index 77def4456706..dc1ebd13cc88 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
@@ -7,7 +7,7 @@ output bus.
Required properties:
- compatible: "mediatek,<chip>-dpi"
- the supported chips are mt2701 , mt8173 and mt8183.
+ the supported chips are mt2701, mt7623, mt8173 and mt8183.
- reg: Physical base address and length of the controller's registers
- interrupts: The interrupt signal from the function block.
- clocks: device clocks
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
index 8e4729de8c85..f06f24d405a5 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
@@ -7,7 +7,7 @@ channel output.
Required properties:
- compatible: "mediatek,<chip>-dsi"
- the supported chips are mt2701, mt8173 and mt8183.
+- the supported chips are mt2701, mt7623, mt8173 and mt8183.
- reg: Physical base address and length of the controller's registers
- interrupts: The interrupt signal from the function block.
- clocks: device clocks
@@ -26,7 +26,7 @@ The MIPI TX configuration module controls the MIPI D-PHY.
Required properties:
- compatible: "mediatek,<chip>-mipi-tx"
- the supported chips are mt2701, mt8173 and mt8183.
+- the supported chips are mt2701, 7623, mt8173 and mt8183.
- reg: Physical base address and length of the controller's registers
- clocks: PLL reference clock
- clock-output-names: name of the output clock line to the DSI encoder
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt
index 7b124242b0c5..6b1c586403e4 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt
@@ -6,6 +6,7 @@ its parallel input.
Required properties:
- compatible: Should be "mediatek,<chip>-hdmi".
+- the supported chips are mt2701, mt7623 and mt8173
- reg: Physical base address and length of the controller's registers
- interrupts: The interrupt signal from the function block.
- clocks: device clocks
@@ -32,6 +33,7 @@ The HDMI CEC controller handles hotplug detection and CEC communication.
Required properties:
- compatible: Should be "mediatek,<chip>-cec"
+- the supported chips are mt7623 and mt8173
- reg: Physical base address and length of the controller's registers
- interrupts: The interrupt signal from the function block.
- clocks: device clock
@@ -44,6 +46,7 @@ The Mediatek's I2C controller is used to interface with I2C devices.
Required properties:
- compatible: Should be "mediatek,<chip>-hdmi-ddc"
+- the supported chips are mt7623 and mt8173
- reg: Physical base address and length of the controller's registers
- clocks: device clock
- clock-names: Should be "ddc-i2c".
@@ -56,6 +59,7 @@ output and drives the HDMI pads.
Required properties:
- compatible: "mediatek,<chip>-hdmi-phy"
+- the supported chips are mt2701, mt7623 and mt8173
- reg: Physical base address and length of the module's registers
- clocks: PLL reference clock
- clock-names: must contain "pll_ref"
--
2.25.1
next prev parent reply other threads:[~2020-08-04 16:56 UTC|newest]
Thread overview: 96+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-04 16:55 [PATCH v4 0/6] make hdmi work on bananapi-r2 Frank Wunderlich
2020-08-04 16:55 ` Frank Wunderlich
2020-08-04 16:55 ` Frank Wunderlich
2020-08-04 16:55 ` Frank Wunderlich
2020-08-04 16:55 ` Frank Wunderlich [this message]
2020-08-04 16:55 ` [PATCH v4 1/6] dt-bindings: mediatek: add mt7623 display-nodes Frank Wunderlich
2020-08-04 16:55 ` Frank Wunderlich
2020-08-04 16:55 ` Frank Wunderlich
2020-08-04 17:18 ` Aw: " Frank Wunderlich
2020-08-04 17:18 ` Frank Wunderlich
2020-08-04 17:18 ` Frank Wunderlich
2020-08-04 17:18 ` Frank Wunderlich
2020-08-04 17:22 ` Rob Herring
2020-08-04 17:22 ` Rob Herring
2020-08-04 17:22 ` Rob Herring
2020-08-04 17:22 ` Rob Herring
2020-08-04 23:27 ` Chun-Kuang Hu
2020-08-04 23:27 ` Chun-Kuang Hu
2020-08-04 23:27 ` Chun-Kuang Hu
2020-08-04 23:27 ` Chun-Kuang Hu
2020-08-04 16:55 ` [PATCH v4] net: ethernet: mtk_eth_soc: fix MTU warnings Frank Wunderlich
2020-08-04 16:55 ` Frank Wunderlich
2020-08-04 16:55 ` Frank Wunderlich
2020-08-04 16:55 ` Frank Wunderlich
2020-08-04 17:20 ` Aw: " Frank Wunderlich
2020-08-04 17:20 ` Frank Wunderlich
2020-08-04 17:20 ` Frank Wunderlich
2020-08-04 17:20 ` Frank Wunderlich
2020-08-04 16:55 ` [PATCH v4 2/6] drm/mediatek: add ddp routing for mt7623 Frank Wunderlich
2020-08-04 16:55 ` Frank Wunderlich
2020-08-04 16:55 ` Frank Wunderlich
2020-08-04 16:55 ` Frank Wunderlich
2020-08-04 23:01 ` Chun-Kuang Hu
2020-08-04 23:01 ` Chun-Kuang Hu
2020-08-04 23:01 ` Chun-Kuang Hu
2020-08-04 23:01 ` Chun-Kuang Hu
2020-08-04 16:55 ` [PATCH v4 3/6] drm/mediatek: disable tmds on mt2701 Frank Wunderlich
2020-08-04 16:55 ` Frank Wunderlich
2020-08-04 16:55 ` Frank Wunderlich
2020-08-04 16:55 ` Frank Wunderlich
2020-08-04 16:55 ` [PATCH v4 4/6] drm/mediatek: Add get_possible_crtc API for dpi, dsi Frank Wunderlich
2020-08-04 16:55 ` Frank Wunderlich
2020-08-04 16:55 ` Frank Wunderlich
2020-08-04 16:55 ` Frank Wunderlich
2020-08-04 16:55 ` [PATCH v4 5/6] drm/mediatek: dpi/dsi: change the getting possible_crtc way Frank Wunderlich
2020-08-04 16:55 ` Frank Wunderlich
2020-08-04 16:55 ` Frank Wunderlich
2020-08-04 16:55 ` Frank Wunderlich
2020-08-04 16:55 ` [PATCH v4 6/6] arm: dts: mt7623: add display subsystem related device nodes Frank Wunderlich
2020-08-04 16:55 ` Frank Wunderlich
2020-08-04 16:55 ` Frank Wunderlich
2020-08-04 16:55 ` Frank Wunderlich
2020-08-04 17:24 ` David Woodhouse
2020-08-04 17:24 ` David Woodhouse
2020-08-04 17:24 ` David Woodhouse
2020-08-04 17:24 ` David Woodhouse
2020-08-04 17:40 ` Aw: " Frank Wunderlich
2020-08-04 17:40 ` Frank Wunderlich
2020-08-04 17:40 ` Frank Wunderlich
2020-08-04 17:40 ` Frank Wunderlich
2020-08-04 18:02 ` David Woodhouse
2020-08-04 18:02 ` David Woodhouse
2020-08-04 18:02 ` David Woodhouse
2020-08-04 18:02 ` David Woodhouse
2020-08-05 7:27 ` Aw: " Frank Wunderlich
2020-08-05 7:27 ` Frank Wunderlich
2020-08-05 7:27 ` Frank Wunderlich
2020-08-05 7:27 ` Frank Wunderlich
2020-08-05 8:36 ` David Woodhouse
2020-08-05 8:36 ` David Woodhouse
2020-08-05 8:36 ` David Woodhouse
2020-08-05 8:36 ` David Woodhouse
2020-08-05 8:49 ` Aw: " Frank Wunderlich
2020-08-05 8:49 ` Frank Wunderlich
2020-08-05 8:49 ` Frank Wunderlich
2020-08-05 8:49 ` Frank Wunderlich
2020-08-05 11:27 ` David Woodhouse
2020-08-05 11:27 ` David Woodhouse
2020-08-05 11:27 ` David Woodhouse
2020-08-05 11:27 ` David Woodhouse
2020-08-05 11:30 ` [PATCH 1/3] arm: dts: remove stray /dts-v1/ from mt7623a.dtsi David Woodhouse
2020-08-05 11:30 ` David Woodhouse
2020-08-05 11:30 ` David Woodhouse
2020-08-05 11:30 ` David Woodhouse
2020-08-05 11:30 ` [PATCH 2/3] arm: dts: mt7623: move MT7623N GPU to separate mt7623n.dtsi file David Woodhouse
2020-08-05 11:30 ` David Woodhouse
2020-08-05 11:30 ` David Woodhouse
2020-08-05 11:30 ` David Woodhouse
2020-08-05 13:01 ` Aw: " Frank Wunderlich
2020-08-05 13:01 ` Frank Wunderlich
2020-08-05 13:01 ` Frank Wunderlich
2020-08-05 13:01 ` Frank Wunderlich
2020-08-05 11:30 ` [PATCH 3/3] arm: dts: mt7623: add support for UniElec U7623 eMMC David Woodhouse
2020-08-05 11:30 ` David Woodhouse
2020-08-05 11:30 ` David Woodhouse
2020-08-05 11:30 ` David Woodhouse
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200804165555.75159-2-linux@fw-web.de \
--to=linux@fw-web.de \
--cc=airlied@linux.ie \
--cc=chunkuang.hu@kernel.org \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=frank-w@public-files.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=p.zabel@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.