[PATCH AUTOSEL 4.14 01/22] drm/tilcdc: fix leak & null ref in panel_connector_get_modes

[PATCH AUTOSEL 4.14 01/22] drm/tilcdc: fix leak & null ref in panel_connector_get_modes

[Sasha Levin]

From: Tomi Valkeinen <tomi.valkeinen@ti.com>

[ Upstream commit 3f9c1c872cc97875ddc8d63bc9fe6ee13652b933 ]

If videomode_from_timings() returns true, the mode allocated with
drm_mode_create will be leaked.

Also, the return value of drm_mode_create() is never checked, and thus
could cause NULL deref.

Fix these two issues.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429104234.18910-1-tomi.valkeinen@ti.com
Reviewed-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/tilcdc/tilcdc_panel.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/tilcdc/tilcdc_panel.c b/drivers/gpu/drm/tilcdc/tilcdc_panel.c
index 1813a3623ce60..0484b2cf0e2b5 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_panel.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_panel.c
@@ -152,12 +152,16 @@ static int panel_connector_get_modes(struct drm_connector *connector)
 	int i;
 
 	for (i = 0; i < timings->num_timings; i++) {
-		struct drm_display_mode *mode = drm_mode_create(dev);
+		struct drm_display_mode *mode;
 		struct videomode vm;
 
 		if (videomode_from_timings(timings, &vm, i))
 			break;
 
+		mode = drm_mode_create(dev);
+		if (!mode)
+			break;
+
 		drm_display_mode_from_videomode(&vm, mode);
 
 		mode->type = DRM_MODE_TYPE_DRIVER;
-- 
2.25.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.14 01/22] drm/tilcdc: fix leak & null ref in panel_connector_get_modes

[Sasha Levin]

From: Tomi Valkeinen <tomi.valkeinen@ti.com>

[ Upstream commit 3f9c1c872cc97875ddc8d63bc9fe6ee13652b933 ]

If videomode_from_timings() returns true, the mode allocated with
drm_mode_create will be leaked.

Also, the return value of drm_mode_create() is never checked, and thus
could cause NULL deref.

Fix these two issues.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429104234.18910-1-tomi.valkeinen@ti.com
Reviewed-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/tilcdc/tilcdc_panel.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/tilcdc/tilcdc_panel.c b/drivers/gpu/drm/tilcdc/tilcdc_panel.c
index 1813a3623ce60..0484b2cf0e2b5 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_panel.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_panel.c
@@ -152,12 +152,16 @@ static int panel_connector_get_modes(struct drm_connector *connector)
 	int i;
 
 	for (i = 0; i < timings->num_timings; i++) {
-		struct drm_display_mode *mode = drm_mode_create(dev);
+		struct drm_display_mode *mode;
 		struct videomode vm;
 
 		if (videomode_from_timings(timings, &vm, i))
 			break;
 
+		mode = drm_mode_create(dev);
+		if (!mode)
+			break;
+
 		drm_display_mode_from_videomode(&vm, mode);
 
 		mode->type = DRM_MODE_TYPE_DRIVER;
-- 
2.25.1

[PATCH AUTOSEL 4.14 02/22] Bluetooth: add a mutex lock to avoid UAF in do_enale_set

[Sasha Levin]

From: Lihong Kou <koulihong@huawei.com>

[ Upstream commit f9c70bdc279b191da8d60777c627702c06e4a37d ]

In the case we set or free the global value listen_chan in
different threads, we can encounter the UAF problems because
the method is not protected by any lock, add one to avoid
this bug.

BUG: KASAN: use-after-free in l2cap_chan_close+0x48/0x990
net/bluetooth/l2cap_core.c:730
Read of size 8 at addr ffff888096950000 by task kworker/1:102/2868

CPU: 1 PID: 2868 Comm: kworker/1:102 Not tainted 5.5.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine,
BIOS Google 01/01/2011
Workqueue: events do_enable_set
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1fb/0x318 lib/dump_stack.c:118
 print_address_description+0x74/0x5c0 mm/kasan/report.c:374
 __kasan_report+0x149/0x1c0 mm/kasan/report.c:506
 kasan_report+0x26/0x50 mm/kasan/common.c:641
 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135
 l2cap_chan_close+0x48/0x990 net/bluetooth/l2cap_core.c:730
 do_enable_set+0x660/0x900 net/bluetooth/6lowpan.c:1074
 process_one_work+0x7f5/0x10f0 kernel/workqueue.c:2264
 worker_thread+0xbbc/0x1630 kernel/workqueue.c:2410
 kthread+0x332/0x350 kernel/kthread.c:255
 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352

Allocated by task 2870:
 save_stack mm/kasan/common.c:72 [inline]
 set_track mm/kasan/common.c:80 [inline]
 __kasan_kmalloc+0x118/0x1c0 mm/kasan/common.c:515
 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:529
 kmem_cache_alloc_trace+0x221/0x2f0 mm/slab.c:3551
 kmalloc include/linux/slab.h:555 [inline]
 kzalloc include/linux/slab.h:669 [inline]
 l2cap_chan_create+0x50/0x320 net/bluetooth/l2cap_core.c:446
 chan_create net/bluetooth/6lowpan.c:640 [inline]
 bt_6lowpan_listen net/bluetooth/6lowpan.c:959 [inline]
 do_enable_set+0x6a4/0x900 net/bluetooth/6lowpan.c:1078
 process_one_work+0x7f5/0x10f0 kernel/workqueue.c:2264
 worker_thread+0xbbc/0x1630 kernel/workqueue.c:2410
 kthread+0x332/0x350 kernel/kthread.c:255
 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352

Freed by task 2870:
 save_stack mm/kasan/common.c:72 [inline]
 set_track mm/kasan/common.c:80 [inline]
 kasan_set_free_info mm/kasan/common.c:337 [inline]
 __kasan_slab_free+0x12e/0x1e0 mm/kasan/common.c:476
 kasan_slab_free+0xe/0x10 mm/kasan/common.c:485
 __cache_free mm/slab.c:3426 [inline]
 kfree+0x10d/0x220 mm/slab.c:3757
 l2cap_chan_destroy net/bluetooth/l2cap_core.c:484 [inline]
 kref_put include/linux/kref.h:65 [inline]
 l2cap_chan_put+0x170/0x190 net/bluetooth/l2cap_core.c:498
 do_enable_set+0x66c/0x900 net/bluetooth/6lowpan.c:1075
 process_one_work+0x7f5/0x10f0 kernel/workqueue.c:2264
 worker_thread+0xbbc/0x1630 kernel/workqueue.c:2410
 kthread+0x332/0x350 kernel/kthread.c:255
 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352

The buggy address belongs to the object at ffff888096950000
 which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 0 bytes inside of
 2048-byte region [ffff888096950000, ffff888096950800)
The buggy address belongs to the page:
page:ffffea00025a5400 refcount:1 mapcount:0 mapping:ffff8880aa400e00 index:0x0
flags: 0xfffe0000000200(slab)
raw: 00fffe0000000200 ffffea00027d1548 ffffea0002397808 ffff8880aa400e00
raw: 0000000000000000 ffff888096950000 0000000100000001 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff88809694ff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff88809694ff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff888096950000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                   ^
 ffff888096950080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff888096950100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

Reported-by: syzbot+96414aa0033c363d8458@syzkaller.appspotmail.com
Signed-off-by: Lihong Kou <koulihong@huawei.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/6lowpan.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/net/bluetooth/6lowpan.c b/net/bluetooth/6lowpan.c
index 357475cceec61..9a75f9b00b512 100644
--- a/net/bluetooth/6lowpan.c
+++ b/net/bluetooth/6lowpan.c
@@ -57,6 +57,7 @@ static bool enable_6lowpan;
 /* We are listening incoming connections via this channel
  */
 static struct l2cap_chan *listen_chan;
+static DEFINE_MUTEX(set_lock);
 
 struct lowpan_peer {
 	struct list_head list;
@@ -1082,12 +1083,14 @@ static void do_enable_set(struct work_struct *work)
 
 	enable_6lowpan = set_enable->flag;
 
+	mutex_lock(&set_lock);
 	if (listen_chan) {
 		l2cap_chan_close(listen_chan, 0);
 		l2cap_chan_put(listen_chan);
 	}
 
 	listen_chan = bt_6lowpan_listen();
+	mutex_unlock(&set_lock);
 
 	kfree(set_enable);
 }
@@ -1139,11 +1142,13 @@ static ssize_t lowpan_control_write(struct file *fp,
 		if (ret == -EINVAL)
 			return ret;
 
+		mutex_lock(&set_lock);
 		if (listen_chan) {
 			l2cap_chan_close(listen_chan, 0);
 			l2cap_chan_put(listen_chan);
 			listen_chan = NULL;
 		}
+		mutex_unlock(&set_lock);
 
 		if (conn) {
 			struct lowpan_peer *peer;
-- 
2.25.1

[PATCH AUTOSEL 4.14 03/22] fs/btrfs: Add cond_resched() for try_release_extent_mapping() stalls

[Sasha Levin]

From: "Paul E. McKenney" <paulmck@kernel.org>

[ Upstream commit 9f47eb5461aaeb6cb8696f9d11503ae90e4d5cb0 ]

Very large I/Os can cause the following RCU CPU stall warning:

RIP: 0010:rb_prev+0x8/0x50
Code: 49 89 c0 49 89 d1 48 89 c2 48 89 f8 e9 e5 fd ff ff 4c 89 48 10 c3 4c =
89 06 c3 4c 89 40 10 c3 0f 1f 00 48 8b 0f 48 39 cf 74 38 <48> 8b 47 10 48 85 c0 74 22 48 8b 50 08 48 85 d2 74 0c 48 89 d0 48
RSP: 0018:ffffc9002212bab0 EFLAGS: 00000287 ORIG_RAX: ffffffffffffff13
RAX: ffff888821f93630 RBX: ffff888821f93630 RCX: ffff888821f937e0
RDX: 0000000000000000 RSI: 0000000000102000 RDI: ffff888821f93630
RBP: 0000000000103000 R08: 000000000006c000 R09: 0000000000000238
R10: 0000000000102fff R11: ffffc9002212bac8 R12: 0000000000000001
R13: ffffffffffffffff R14: 0000000000102000 R15: ffff888821f937e0
 __lookup_extent_mapping+0xa0/0x110
 try_release_extent_mapping+0xdc/0x220
 btrfs_releasepage+0x45/0x70
 shrink_page_list+0xa39/0xb30
 shrink_inactive_list+0x18f/0x3b0
 shrink_lruvec+0x38e/0x6b0
 shrink_node+0x14d/0x690
 do_try_to_free_pages+0xc6/0x3e0
 try_to_free_mem_cgroup_pages+0xe6/0x1e0
 reclaim_high.constprop.73+0x87/0xc0
 mem_cgroup_handle_over_high+0x66/0x150
 exit_to_usermode_loop+0x82/0xd0
 do_syscall_64+0xd4/0x100
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

On a PREEMPT=n kernel, the try_release_extent_mapping() function's
"while" loop might run for a very long time on a large I/O.  This commit
therefore adds a cond_resched() to this loop, providing RCU any needed
quiescent states.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/extent_io.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index 6d2bfbb63d9ba..ef1fd6a09d8e5 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -4323,6 +4323,8 @@ int try_release_extent_mapping(struct extent_map_tree *map,
 
 			/* once for us */
 			free_extent_map(em);
+
+			cond_resched(); /* Allow large-extent preemption. */
 		}
 	}
 	return try_release_extent_state(map, tree, page, mask);
-- 
2.25.1

[PATCH AUTOSEL 4.14 04/22] drm/radeon: Fix reference count leaks caused by pm_runtime_get_sync

[Sasha Levin]

From: Aditya Pakki <pakki001@umn.edu>

[ Upstream commit 9fb10671011143d15b6b40d6d5fa9c52c57e9d63 ]

On calling pm_runtime_get_sync() the reference count of the device
is incremented. In case of failure, decrement the
reference count before returning the error.

Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/radeon/radeon_display.c | 4 +++-
 drivers/gpu/drm/radeon/radeon_drv.c     | 4 +++-
 drivers/gpu/drm/radeon/radeon_kms.c     | 4 +++-
 3 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
index d86110cdf0852..b2334349799d1 100644
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -627,8 +627,10 @@ radeon_crtc_set_config(struct drm_mode_set *set,
 	dev = set->crtc->dev;
 
 	ret = pm_runtime_get_sync(dev->dev);
-	if (ret < 0)
+	if (ret < 0) {
+		pm_runtime_put_autosuspend(dev->dev);
 		return ret;
+	}
 
 	ret = drm_crtc_helper_set_config(set, ctx);
 
diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index f6908e2f9e55a..41e8abd099784 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -496,8 +496,10 @@ long radeon_drm_ioctl(struct file *filp,
 	long ret;
 	dev = file_priv->minor->dev;
 	ret = pm_runtime_get_sync(dev->dev);
-	if (ret < 0)
+	if (ret < 0) {
+		pm_runtime_put_autosuspend(dev->dev);
 		return ret;
+	}
 
 	ret = drm_ioctl(filp, cmd, arg);
 	
diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c
index dfee8f7d94ae5..2e28cf8118404 100644
--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -659,8 +659,10 @@ int radeon_driver_open_kms(struct drm_device *dev, struct drm_file *file_priv)
 	file_priv->driver_priv = NULL;
 
 	r = pm_runtime_get_sync(dev->dev);
-	if (r < 0)
+	if (r < 0) {
+		pm_runtime_put_autosuspend(dev->dev);
 		return r;
+	}
 
 	/* new gpu have virtual address space support */
 	if (rdev->family >= CHIP_CAYMAN) {
-- 
2.25.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 4.14 04/22] drm/radeon: Fix reference count leaks caused by pm_runtime_get_sync

[Sasha Levin]

From: Aditya Pakki <pakki001@umn.edu>

[ Upstream commit 9fb10671011143d15b6b40d6d5fa9c52c57e9d63 ]

On calling pm_runtime_get_sync() the reference count of the device
is incremented. In case of failure, decrement the
reference count before returning the error.

Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/radeon/radeon_display.c | 4 +++-
 drivers/gpu/drm/radeon/radeon_drv.c     | 4 +++-
 drivers/gpu/drm/radeon/radeon_kms.c     | 4 +++-
 3 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
index d86110cdf0852..b2334349799d1 100644
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -627,8 +627,10 @@ radeon_crtc_set_config(struct drm_mode_set *set,
 	dev = set->crtc->dev;
 
 	ret = pm_runtime_get_sync(dev->dev);
-	if (ret < 0)
+	if (ret < 0) {
+		pm_runtime_put_autosuspend(dev->dev);
 		return ret;
+	}
 
 	ret = drm_crtc_helper_set_config(set, ctx);
 
diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index f6908e2f9e55a..41e8abd099784 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -496,8 +496,10 @@ long radeon_drm_ioctl(struct file *filp,
 	long ret;
 	dev = file_priv->minor->dev;
 	ret = pm_runtime_get_sync(dev->dev);
-	if (ret < 0)
+	if (ret < 0) {
+		pm_runtime_put_autosuspend(dev->dev);
 		return ret;
+	}
 
 	ret = drm_ioctl(filp, cmd, arg);
 	
diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c
index dfee8f7d94ae5..2e28cf8118404 100644
--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -659,8 +659,10 @@ int radeon_driver_open_kms(struct drm_device *dev, struct drm_file *file_priv)
 	file_priv->driver_priv = NULL;
 
 	r = pm_runtime_get_sync(dev->dev);
-	if (r < 0)
+	if (r < 0) {
+		pm_runtime_put_autosuspend(dev->dev);
 		return r;
+	}
 
 	/* new gpu have virtual address space support */
 	if (rdev->family >= CHIP_CAYMAN) {
-- 
2.25.1

[PATCH AUTOSEL 4.14 04/22] drm/radeon: Fix reference count leaks caused by pm_runtime_get_sync

[Sasha Levin]

From: Aditya Pakki <pakki001@umn.edu>

[ Upstream commit 9fb10671011143d15b6b40d6d5fa9c52c57e9d63 ]

On calling pm_runtime_get_sync() the reference count of the device
is incremented. In case of failure, decrement the
reference count before returning the error.

Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/radeon/radeon_display.c | 4 +++-
 drivers/gpu/drm/radeon/radeon_drv.c     | 4 +++-
 drivers/gpu/drm/radeon/radeon_kms.c     | 4 +++-
 3 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
index d86110cdf0852..b2334349799d1 100644
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -627,8 +627,10 @@ radeon_crtc_set_config(struct drm_mode_set *set,
 	dev = set->crtc->dev;
 
 	ret = pm_runtime_get_sync(dev->dev);
-	if (ret < 0)
+	if (ret < 0) {
+		pm_runtime_put_autosuspend(dev->dev);
 		return ret;
+	}
 
 	ret = drm_crtc_helper_set_config(set, ctx);
 
diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index f6908e2f9e55a..41e8abd099784 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -496,8 +496,10 @@ long radeon_drm_ioctl(struct file *filp,
 	long ret;
 	dev = file_priv->minor->dev;
 	ret = pm_runtime_get_sync(dev->dev);
-	if (ret < 0)
+	if (ret < 0) {
+		pm_runtime_put_autosuspend(dev->dev);
 		return ret;
+	}
 
 	ret = drm_ioctl(filp, cmd, arg);
 	
diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c
index dfee8f7d94ae5..2e28cf8118404 100644
--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -659,8 +659,10 @@ int radeon_driver_open_kms(struct drm_device *dev, struct drm_file *file_priv)
 	file_priv->driver_priv = NULL;
 
 	r = pm_runtime_get_sync(dev->dev);
-	if (r < 0)
+	if (r < 0) {
+		pm_runtime_put_autosuspend(dev->dev);
 		return r;
+	}
 
 	/* new gpu have virtual address space support */
 	if (rdev->family >= CHIP_CAYMAN) {
-- 
2.25.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.14 05/22] video: fbdev: neofb: fix memory leak in neo_scan_monitor()

[Sasha Levin]

From: Evgeny Novikov <novikov@ispras.ru>

[ Upstream commit edcb3895a751c762a18d25c8d9846ce9759ed7e1 ]

neofb_probe() calls neo_scan_monitor() that can successfully allocate a
memory for info->monspecs.modedb and proceed to case 0x03. There it does
not free the memory and returns -1. neofb_probe() goes to label
err_scan_monitor, thus, it does not free this memory through calling
fb_destroy_modedb() as well. We can not go to label err_init_hw since
neo_scan_monitor() can fail during memory allocation. So, the patch frees
the memory directly for case 0x03.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630195451.18675-1-novikov@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/neofb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/video/fbdev/neofb.c b/drivers/video/fbdev/neofb.c
index 5d3a444083f74..2018e1ca33eb6 100644
--- a/drivers/video/fbdev/neofb.c
+++ b/drivers/video/fbdev/neofb.c
@@ -1820,6 +1820,7 @@ static int neo_scan_monitor(struct fb_info *info)
 #else
 		printk(KERN_ERR
 		       "neofb: Only 640x480, 800x600/480 and 1024x768 panels are currently supported\n");
+		kfree(info->monspecs.modedb);
 		return -1;
 #endif
 	default:
-- 
2.25.1

[PATCH AUTOSEL 4.14 05/22] video: fbdev: neofb: fix memory leak in neo_scan_monitor()

[Sasha Levin]

From: Evgeny Novikov <novikov@ispras.ru>

[ Upstream commit edcb3895a751c762a18d25c8d9846ce9759ed7e1 ]

neofb_probe() calls neo_scan_monitor() that can successfully allocate a
memory for info->monspecs.modedb and proceed to case 0x03. There it does
not free the memory and returns -1. neofb_probe() goes to label
err_scan_monitor, thus, it does not free this memory through calling
fb_destroy_modedb() as well. We can not go to label err_init_hw since
neo_scan_monitor() can fail during memory allocation. So, the patch frees
the memory directly for case 0x03.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630195451.18675-1-novikov@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/neofb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/video/fbdev/neofb.c b/drivers/video/fbdev/neofb.c
index 5d3a444083f74..2018e1ca33eb6 100644
--- a/drivers/video/fbdev/neofb.c
+++ b/drivers/video/fbdev/neofb.c
@@ -1820,6 +1820,7 @@ static int neo_scan_monitor(struct fb_info *info)
 #else
 		printk(KERN_ERR
 		       "neofb: Only 640x480, 800x600/480 and 1024x768 panels are currently supported\n");
+		kfree(info->monspecs.modedb);
 		return -1;
 #endif
 	default:
-- 
2.25.1

[PATCH AUTOSEL 4.14 05/22] video: fbdev: neofb: fix memory leak in neo_scan_monitor()

[Sasha Levin]

From: Evgeny Novikov <novikov@ispras.ru>

[ Upstream commit edcb3895a751c762a18d25c8d9846ce9759ed7e1 ]

neofb_probe() calls neo_scan_monitor() that can successfully allocate a
memory for info->monspecs.modedb and proceed to case 0x03. There it does
not free the memory and returns -1. neofb_probe() goes to label
err_scan_monitor, thus, it does not free this memory through calling
fb_destroy_modedb() as well. We can not go to label err_init_hw since
neo_scan_monitor() can fail during memory allocation. So, the patch frees
the memory directly for case 0x03.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630195451.18675-1-novikov@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/neofb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/video/fbdev/neofb.c b/drivers/video/fbdev/neofb.c
index 5d3a444083f74..2018e1ca33eb6 100644
--- a/drivers/video/fbdev/neofb.c
+++ b/drivers/video/fbdev/neofb.c
@@ -1820,6 +1820,7 @@ static int neo_scan_monitor(struct fb_info *info)
 #else
 		printk(KERN_ERR
 		       "neofb: Only 640x480, 800x600/480 and 1024x768 panels are currently supported\n");
+		kfree(info->monspecs.modedb);
 		return -1;
 #endif
 	default:
-- 
2.25.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.14 06/22] md-cluster: fix wild pointer of unlock_all_bitmaps()

[Sasha Levin]

From: Zhao Heming <heming.zhao@suse.com>

[ Upstream commit 60f80d6f2d07a6d8aee485a1d1252327eeee0c81 ]

reproduction steps:
```
node1 # mdadm -C /dev/md0 -b clustered -e 1.2 -n 2 -l mirror /dev/sda
/dev/sdb
node2 # mdadm -A /dev/md0 /dev/sda /dev/sdb
node1 # mdadm -G /dev/md0 -b none
mdadm: failed to remove clustered bitmap.
node1 # mdadm -S --scan
^C  <==== mdadm hung & kernel crash
```

kernel stack:
```
[  335.230657] general protection fault: 0000 [#1] SMP NOPTI
[...]
[  335.230848] Call Trace:
[  335.230873]  ? unlock_all_bitmaps+0x5/0x70 [md_cluster]
[  335.230886]  unlock_all_bitmaps+0x3d/0x70 [md_cluster]
[  335.230899]  leave+0x10f/0x190 [md_cluster]
[  335.230932]  ? md_super_wait+0x93/0xa0 [md_mod]
[  335.230947]  ? leave+0x5/0x190 [md_cluster]
[  335.230973]  md_cluster_stop+0x1a/0x30 [md_mod]
[  335.230999]  md_bitmap_free+0x142/0x150 [md_mod]
[  335.231013]  ? _cond_resched+0x15/0x40
[  335.231025]  ? mutex_lock+0xe/0x30
[  335.231056]  __md_stop+0x1c/0xa0 [md_mod]
[  335.231083]  do_md_stop+0x160/0x580 [md_mod]
[  335.231119]  ? 0xffffffffc05fb078
[  335.231148]  md_ioctl+0xa04/0x1930 [md_mod]
[  335.231165]  ? filename_lookup+0xf2/0x190
[  335.231179]  blkdev_ioctl+0x93c/0xa10
[  335.231205]  ? _cond_resched+0x15/0x40
[  335.231214]  ? __check_object_size+0xd4/0x1a0
[  335.231224]  block_ioctl+0x39/0x40
[  335.231243]  do_vfs_ioctl+0xa0/0x680
[  335.231253]  ksys_ioctl+0x70/0x80
[  335.231261]  __x64_sys_ioctl+0x16/0x20
[  335.231271]  do_syscall_64+0x65/0x1f0
[  335.231278]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
```

Signed-off-by: Zhao Heming <heming.zhao@suse.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/md-cluster.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/md/md-cluster.c b/drivers/md/md-cluster.c
index 10057ac85476e..035d5ec8e677f 100644
--- a/drivers/md/md-cluster.c
+++ b/drivers/md/md-cluster.c
@@ -1423,6 +1423,7 @@ static void unlock_all_bitmaps(struct mddev *mddev)
 			}
 		}
 		kfree(cinfo->other_bitmap_lockres);
+		cinfo->other_bitmap_lockres = NULL;
 	}
 }
 
-- 
2.25.1

[PATCH AUTOSEL 4.14 07/22] arm64: dts: hisilicon: hikey: fixes to comply with adi, adv7533 DT binding

[Sasha Levin]

From: Ricardo Cañuelo <ricardo.canuelo@collabora.com>

[ Upstream commit bbe28fc3cbabbef781bcdf847615d52ce2e26e42 ]

hi3660-hikey960.dts:
  Define a 'ports' node for 'adv7533: adv7533@39' and the
  'adi,dsi-lanes' property to make it compliant with the adi,adv7533 DT
  binding.

  This fills the requirements to meet the binding requirements,
  remote endpoints are not defined.

hi6220-hikey.dts:
  Change property name s/pd-gpio/pd-gpios, gpio properties should be
  plural. This is just a cosmetic change.

Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 11 +++++++++++
 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts    |  2 +-
 2 files changed, 12 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index e9f87cb61ade7..8587912e1eb00 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -210,6 +210,17 @@ adv7533: adv7533@39 {
 		status = "ok";
 		compatible = "adi,adv7533";
 		reg = <0x39>;
+		adi,dsi-lanes = <4>;
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+			};
+			port@1 {
+				reg = <1>;
+			};
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index 6887cc1a743d4..f78e6468b02fc 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -513,7 +513,7 @@ adv7533: adv7533@39 {
 		reg = <0x39>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <1 2>;
-		pd-gpio = <&gpio0 4 0>;
+		pd-gpios = <&gpio0 4 0>;
 		adi,dsi-lanes = <4>;
 		#sound-dai-cells = <0>;
 
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 4.14 07/22] arm64: dts: hisilicon: hikey: fixes to comply with adi, adv7533 DT binding

[Sasha Levin]

From: Ricardo Cañuelo <ricardo.canuelo@collabora.com>

[ Upstream commit bbe28fc3cbabbef781bcdf847615d52ce2e26e42 ]

hi3660-hikey960.dts:
  Define a 'ports' node for 'adv7533: adv7533@39' and the
  'adi,dsi-lanes' property to make it compliant with the adi,adv7533 DT
  binding.

  This fills the requirements to meet the binding requirements,
  remote endpoints are not defined.

hi6220-hikey.dts:
  Change property name s/pd-gpio/pd-gpios, gpio properties should be
  plural. This is just a cosmetic change.

Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 11 +++++++++++
 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts    |  2 +-
 2 files changed, 12 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index e9f87cb61ade7..8587912e1eb00 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -210,6 +210,17 @@ adv7533: adv7533@39 {
 		status = "ok";
 		compatible = "adi,adv7533";
 		reg = <0x39>;
+		adi,dsi-lanes = <4>;
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+			};
+			port@1 {
+				reg = <1>;
+			};
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index 6887cc1a743d4..f78e6468b02fc 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -513,7 +513,7 @@ adv7533: adv7533@39 {
 		reg = <0x39>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <1 2>;
-		pd-gpio = <&gpio0 4 0>;
+		pd-gpios = <&gpio0 4 0>;
 		adi,dsi-lanes = <4>;
 		#sound-dai-cells = <0>;
 
-- 
2.25.1

[PATCH AUTOSEL 4.14 08/22] drm/nouveau: fix multiple instances of reference count leaks

[Sasha Levin]

From: Aditya Pakki <pakki001-OJFnDUYgAso@public.gmane.org>

[ Upstream commit 659fb5f154c3434c90a34586f3b7aa1c39cf6062 ]

On calling pm_runtime_get_sync() the reference count of the device
is incremented. In case of failure, decrement the
ref count before returning the error.

Signed-off-by: Aditya Pakki <pakki001-OJFnDUYgAso@public.gmane.org>
Signed-off-by: Ben Skeggs <bskeggs-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Sasha Levin <sashal-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 drivers/gpu/drm/nouveau/nouveau_drm.c | 8 ++++++--
 drivers/gpu/drm/nouveau/nouveau_gem.c | 4 +++-
 2 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c
index d00524a5d7f08..fb6b1d0f7fef3 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_drm.c
@@ -840,8 +840,10 @@ nouveau_drm_open(struct drm_device *dev, struct drm_file *fpriv)
 
 	/* need to bring up power immediately if opening device */
 	ret = pm_runtime_get_sync(dev->dev);
-	if (ret < 0 && ret != -EACCES)
+	if (ret < 0 && ret != -EACCES) {
+		pm_runtime_put_autosuspend(dev->dev);
 		return ret;
+	}
 
 	get_task_comm(tmpname, current);
 	snprintf(name, sizeof(name), "%s[%d]", tmpname, pid_nr(fpriv->pid));
@@ -930,8 +932,10 @@ nouveau_drm_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	long ret;
 
 	ret = pm_runtime_get_sync(dev->dev);
-	if (ret < 0 && ret != -EACCES)
+	if (ret < 0 && ret != -EACCES) {
+		pm_runtime_put_autosuspend(dev->dev);
 		return ret;
+	}
 
 	switch (_IOC_NR(cmd) - DRM_COMMAND_BASE) {
 	case DRM_NOUVEAU_NVIF:
diff --git a/drivers/gpu/drm/nouveau/nouveau_gem.c b/drivers/gpu/drm/nouveau/nouveau_gem.c
index 60ffb70bb9089..c6149b5be073e 100644
--- a/drivers/gpu/drm/nouveau/nouveau_gem.c
+++ b/drivers/gpu/drm/nouveau/nouveau_gem.c
@@ -42,8 +42,10 @@ nouveau_gem_object_del(struct drm_gem_object *gem)
 	int ret;
 
 	ret = pm_runtime_get_sync(dev);
-	if (WARN_ON(ret < 0 && ret != -EACCES))
+	if (WARN_ON(ret < 0 && ret != -EACCES)) {
+		pm_runtime_put_autosuspend(dev);
 		return;
+	}
 
 	if (gem->import_attach)
 		drm_prime_gem_destroy(gem, nvbo->bo.sg);
-- 
2.25.1

[PATCH AUTOSEL 4.14 08/22] drm/nouveau: fix multiple instances of reference count leaks

[Sasha Levin]

From: Aditya Pakki <pakki001@umn.edu>

[ Upstream commit 659fb5f154c3434c90a34586f3b7aa1c39cf6062 ]

On calling pm_runtime_get_sync() the reference count of the device
is incremented. In case of failure, decrement the
ref count before returning the error.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/nouveau/nouveau_drm.c | 8 ++++++--
 drivers/gpu/drm/nouveau/nouveau_gem.c | 4 +++-
 2 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c
index d00524a5d7f08..fb6b1d0f7fef3 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_drm.c
@@ -840,8 +840,10 @@ nouveau_drm_open(struct drm_device *dev, struct drm_file *fpriv)
 
 	/* need to bring up power immediately if opening device */
 	ret = pm_runtime_get_sync(dev->dev);
-	if (ret < 0 && ret != -EACCES)
+	if (ret < 0 && ret != -EACCES) {
+		pm_runtime_put_autosuspend(dev->dev);
 		return ret;
+	}
 
 	get_task_comm(tmpname, current);
 	snprintf(name, sizeof(name), "%s[%d]", tmpname, pid_nr(fpriv->pid));
@@ -930,8 +932,10 @@ nouveau_drm_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	long ret;
 
 	ret = pm_runtime_get_sync(dev->dev);
-	if (ret < 0 && ret != -EACCES)
+	if (ret < 0 && ret != -EACCES) {
+		pm_runtime_put_autosuspend(dev->dev);
 		return ret;
+	}
 
 	switch (_IOC_NR(cmd) - DRM_COMMAND_BASE) {
 	case DRM_NOUVEAU_NVIF:
diff --git a/drivers/gpu/drm/nouveau/nouveau_gem.c b/drivers/gpu/drm/nouveau/nouveau_gem.c
index 60ffb70bb9089..c6149b5be073e 100644
--- a/drivers/gpu/drm/nouveau/nouveau_gem.c
+++ b/drivers/gpu/drm/nouveau/nouveau_gem.c
@@ -42,8 +42,10 @@ nouveau_gem_object_del(struct drm_gem_object *gem)
 	int ret;
 
 	ret = pm_runtime_get_sync(dev);
-	if (WARN_ON(ret < 0 && ret != -EACCES))
+	if (WARN_ON(ret < 0 && ret != -EACCES)) {
+		pm_runtime_put_autosuspend(dev);
 		return;
+	}
 
 	if (gem->import_attach)
 		drm_prime_gem_destroy(gem, nvbo->bo.sg);
-- 
2.25.1

[PATCH AUTOSEL 4.14 08/22] drm/nouveau: fix multiple instances of reference count leaks

[Sasha Levin]

From: Aditya Pakki <pakki001@umn.edu>

[ Upstream commit 659fb5f154c3434c90a34586f3b7aa1c39cf6062 ]

On calling pm_runtime_get_sync() the reference count of the device
is incremented. In case of failure, decrement the
ref count before returning the error.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/nouveau/nouveau_drm.c | 8 ++++++--
 drivers/gpu/drm/nouveau/nouveau_gem.c | 4 +++-
 2 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c
index d00524a5d7f08..fb6b1d0f7fef3 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_drm.c
@@ -840,8 +840,10 @@ nouveau_drm_open(struct drm_device *dev, struct drm_file *fpriv)
 
 	/* need to bring up power immediately if opening device */
 	ret = pm_runtime_get_sync(dev->dev);
-	if (ret < 0 && ret != -EACCES)
+	if (ret < 0 && ret != -EACCES) {
+		pm_runtime_put_autosuspend(dev->dev);
 		return ret;
+	}
 
 	get_task_comm(tmpname, current);
 	snprintf(name, sizeof(name), "%s[%d]", tmpname, pid_nr(fpriv->pid));
@@ -930,8 +932,10 @@ nouveau_drm_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	long ret;
 
 	ret = pm_runtime_get_sync(dev->dev);
-	if (ret < 0 && ret != -EACCES)
+	if (ret < 0 && ret != -EACCES) {
+		pm_runtime_put_autosuspend(dev->dev);
 		return ret;
+	}
 
 	switch (_IOC_NR(cmd) - DRM_COMMAND_BASE) {
 	case DRM_NOUVEAU_NVIF:
diff --git a/drivers/gpu/drm/nouveau/nouveau_gem.c b/drivers/gpu/drm/nouveau/nouveau_gem.c
index 60ffb70bb9089..c6149b5be073e 100644
--- a/drivers/gpu/drm/nouveau/nouveau_gem.c
+++ b/drivers/gpu/drm/nouveau/nouveau_gem.c
@@ -42,8 +42,10 @@ nouveau_gem_object_del(struct drm_gem_object *gem)
 	int ret;
 
 	ret = pm_runtime_get_sync(dev);
-	if (WARN_ON(ret < 0 && ret != -EACCES))
+	if (WARN_ON(ret < 0 && ret != -EACCES)) {
+		pm_runtime_put_autosuspend(dev);
 		return;
+	}
 
 	if (gem->import_attach)
 		drm_prime_gem_destroy(gem, nvbo->bo.sg);
-- 
2.25.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.14 09/22] drm/debugfs: fix plain echo to connector "force" attribute

[Sasha Levin]

From: Michael Tretter <m.tretter@pengutronix.de>

[ Upstream commit c704b17071c4dc571dca3af4e4151dac51de081a ]

Using plain echo to set the "force" connector attribute fails with
-EINVAL, because echo appends a newline to the output.

Replace strcmp with sysfs_streq to also accept strings that end with a
newline.

v2: use sysfs_streq instead of stripping trailing whitespace

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170817104307.17124-1-m.tretter@pengutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/drm_debugfs.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/drm_debugfs.c b/drivers/gpu/drm/drm_debugfs.c
index c1807d5754b2a..454deba13ee5b 100644
--- a/drivers/gpu/drm/drm_debugfs.c
+++ b/drivers/gpu/drm/drm_debugfs.c
@@ -250,13 +250,13 @@ static ssize_t connector_write(struct file *file, const char __user *ubuf,
 
 	buf[len] = '\0';
 
-	if (!strcmp(buf, "on"))
+	if (sysfs_streq(buf, "on"))
 		connector->force = DRM_FORCE_ON;
-	else if (!strcmp(buf, "digital"))
+	else if (sysfs_streq(buf, "digital"))
 		connector->force = DRM_FORCE_ON_DIGITAL;
-	else if (!strcmp(buf, "off"))
+	else if (sysfs_streq(buf, "off"))
 		connector->force = DRM_FORCE_OFF;
-	else if (!strcmp(buf, "unspecified"))
+	else if (sysfs_streq(buf, "unspecified"))
 		connector->force = DRM_FORCE_UNSPECIFIED;
 	else
 		return -EINVAL;
-- 
2.25.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.14 09/22] drm/debugfs: fix plain echo to connector "force" attribute

[Sasha Levin]

From: Michael Tretter <m.tretter@pengutronix.de>

[ Upstream commit c704b17071c4dc571dca3af4e4151dac51de081a ]

Using plain echo to set the "force" connector attribute fails with
-EINVAL, because echo appends a newline to the output.

Replace strcmp with sysfs_streq to also accept strings that end with a
newline.

v2: use sysfs_streq instead of stripping trailing whitespace

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170817104307.17124-1-m.tretter@pengutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/drm_debugfs.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/drm_debugfs.c b/drivers/gpu/drm/drm_debugfs.c
index c1807d5754b2a..454deba13ee5b 100644
--- a/drivers/gpu/drm/drm_debugfs.c
+++ b/drivers/gpu/drm/drm_debugfs.c
@@ -250,13 +250,13 @@ static ssize_t connector_write(struct file *file, const char __user *ubuf,
 
 	buf[len] = '\0';
 
-	if (!strcmp(buf, "on"))
+	if (sysfs_streq(buf, "on"))
 		connector->force = DRM_FORCE_ON;
-	else if (!strcmp(buf, "digital"))
+	else if (sysfs_streq(buf, "digital"))
 		connector->force = DRM_FORCE_ON_DIGITAL;
-	else if (!strcmp(buf, "off"))
+	else if (sysfs_streq(buf, "off"))
 		connector->force = DRM_FORCE_OFF;
-	else if (!strcmp(buf, "unspecified"))
+	else if (sysfs_streq(buf, "unspecified"))
 		connector->force = DRM_FORCE_UNSPECIFIED;
 	else
 		return -EINVAL;
-- 
2.25.1

[PATCH AUTOSEL 4.14 10/22] irqchip/irq-mtk-sysirq: Replace spinlock with raw_spinlock

[Sasha Levin]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

[ Upstream commit 6eeb997ab5075e770a002c51351fa4ec2c6b5c39 ]

This driver may take a regular spinlock when a raw spinlock
(irq_desc->lock) is already taken which results in the following
lockdep splat:

=============================
[ BUG: Invalid wait context ]
5.7.0-rc7 #1 Not tainted
-----------------------------
swapper/0/0 is trying to lock:
ffffff800303b798 (&chip_data->lock){....}-{3:3}, at: mtk_sysirq_set_type+0x48/0xc0
other info that might help us debug this:
context-{5:5}
2 locks held by swapper/0/0:
 #0: ffffff800302ee68 (&desc->request_mutex){....}-{4:4}, at: __setup_irq+0xc4/0x8a0
 #1: ffffff800302ecf0 (&irq_desc_lock_class){....}-{2:2}, at: __setup_irq+0xe4/0x8a0
stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-rc7 #1
Hardware name: Pumpkin MT8516 (DT)
Call trace:
 dump_backtrace+0x0/0x180
 show_stack+0x14/0x20
 dump_stack+0xd0/0x118
 __lock_acquire+0x8c8/0x2270
 lock_acquire+0xf8/0x470
 _raw_spin_lock_irqsave+0x50/0x78
 mtk_sysirq_set_type+0x48/0xc0
 __irq_set_trigger+0x58/0x170
 __setup_irq+0x420/0x8a0
 request_threaded_irq+0xd8/0x190
 timer_of_init+0x1e8/0x2c4
 mtk_gpt_init+0x5c/0x1dc
 timer_probe+0x74/0xf4
 time_init+0x14/0x44
 start_kernel+0x394/0x4f0

Replace the spinlock_t with raw_spinlock_t to avoid this warning.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200615074445.3579-1-brgl@bgdev.pl
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-mtk-sysirq.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/irqchip/irq-mtk-sysirq.c b/drivers/irqchip/irq-mtk-sysirq.c
index 90aaf190157f7..42455f31b0611 100644
--- a/drivers/irqchip/irq-mtk-sysirq.c
+++ b/drivers/irqchip/irq-mtk-sysirq.c
@@ -23,7 +23,7 @@
 #include <linux/spinlock.h>
 
 struct mtk_sysirq_chip_data {
-	spinlock_t lock;
+	raw_spinlock_t lock;
 	u32 nr_intpol_bases;
 	void __iomem **intpol_bases;
 	u32 *intpol_words;
@@ -45,7 +45,7 @@ static int mtk_sysirq_set_type(struct irq_data *data, unsigned int type)
 	reg_index = chip_data->which_word[hwirq];
 	offset = hwirq & 0x1f;
 
-	spin_lock_irqsave(&chip_data->lock, flags);
+	raw_spin_lock_irqsave(&chip_data->lock, flags);
 	value = readl_relaxed(base + reg_index * 4);
 	if (type == IRQ_TYPE_LEVEL_LOW || type == IRQ_TYPE_EDGE_FALLING) {
 		if (type == IRQ_TYPE_LEVEL_LOW)
@@ -61,7 +61,7 @@ static int mtk_sysirq_set_type(struct irq_data *data, unsigned int type)
 
 	data = data->parent_data;
 	ret = data->chip->irq_set_type(data, type);
-	spin_unlock_irqrestore(&chip_data->lock, flags);
+	raw_spin_unlock_irqrestore(&chip_data->lock, flags);
 	return ret;
 }
 
@@ -220,7 +220,7 @@ static int __init mtk_sysirq_of_init(struct device_node *node,
 		ret = -ENOMEM;
 		goto out_free_which_word;
 	}
-	spin_lock_init(&chip_data->lock);
+	raw_spin_lock_init(&chip_data->lock);
 
 	return 0;
 
-- 
2.25.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH AUTOSEL 4.14 10/22] irqchip/irq-mtk-sysirq: Replace spinlock with raw_spinlock

[Sasha Levin]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

[ Upstream commit 6eeb997ab5075e770a002c51351fa4ec2c6b5c39 ]

This driver may take a regular spinlock when a raw spinlock
(irq_desc->lock) is already taken which results in the following
lockdep splat:

=============================
[ BUG: Invalid wait context ]
5.7.0-rc7 #1 Not tainted
-----------------------------
swapper/0/0 is trying to lock:
ffffff800303b798 (&chip_data->lock){....}-{3:3}, at: mtk_sysirq_set_type+0x48/0xc0
other info that might help us debug this:
context-{5:5}
2 locks held by swapper/0/0:
 #0: ffffff800302ee68 (&desc->request_mutex){....}-{4:4}, at: __setup_irq+0xc4/0x8a0
 #1: ffffff800302ecf0 (&irq_desc_lock_class){....}-{2:2}, at: __setup_irq+0xe4/0x8a0
stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-rc7 #1
Hardware name: Pumpkin MT8516 (DT)
Call trace:
 dump_backtrace+0x0/0x180
 show_stack+0x14/0x20
 dump_stack+0xd0/0x118
 __lock_acquire+0x8c8/0x2270
 lock_acquire+0xf8/0x470
 _raw_spin_lock_irqsave+0x50/0x78
 mtk_sysirq_set_type+0x48/0xc0
 __irq_set_trigger+0x58/0x170
 __setup_irq+0x420/0x8a0
 request_threaded_irq+0xd8/0x190
 timer_of_init+0x1e8/0x2c4
 mtk_gpt_init+0x5c/0x1dc
 timer_probe+0x74/0xf4
 time_init+0x14/0x44
 start_kernel+0x394/0x4f0

Replace the spinlock_t with raw_spinlock_t to avoid this warning.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200615074445.3579-1-brgl@bgdev.pl
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-mtk-sysirq.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/irqchip/irq-mtk-sysirq.c b/drivers/irqchip/irq-mtk-sysirq.c
index 90aaf190157f7..42455f31b0611 100644
--- a/drivers/irqchip/irq-mtk-sysirq.c
+++ b/drivers/irqchip/irq-mtk-sysirq.c
@@ -23,7 +23,7 @@
 #include <linux/spinlock.h>
 
 struct mtk_sysirq_chip_data {
-	spinlock_t lock;
+	raw_spinlock_t lock;
 	u32 nr_intpol_bases;
 	void __iomem **intpol_bases;
 	u32 *intpol_words;
@@ -45,7 +45,7 @@ static int mtk_sysirq_set_type(struct irq_data *data, unsigned int type)
 	reg_index = chip_data->which_word[hwirq];
 	offset = hwirq & 0x1f;
 
-	spin_lock_irqsave(&chip_data->lock, flags);
+	raw_spin_lock_irqsave(&chip_data->lock, flags);
 	value = readl_relaxed(base + reg_index * 4);
 	if (type == IRQ_TYPE_LEVEL_LOW || type == IRQ_TYPE_EDGE_FALLING) {
 		if (type == IRQ_TYPE_LEVEL_LOW)
@@ -61,7 +61,7 @@ static int mtk_sysirq_set_type(struct irq_data *data, unsigned int type)
 
 	data = data->parent_data;
 	ret = data->chip->irq_set_type(data, type);
-	spin_unlock_irqrestore(&chip_data->lock, flags);
+	raw_spin_unlock_irqrestore(&chip_data->lock, flags);
 	return ret;
 }
 
@@ -220,7 +220,7 @@ static int __init mtk_sysirq_of_init(struct device_node *node,
 		ret = -ENOMEM;
 		goto out_free_which_word;
 	}
-	spin_lock_init(&chip_data->lock);
+	raw_spin_lock_init(&chip_data->lock);
 
 	return 0;
 
-- 
2.25.1

[PATCH AUTOSEL 4.14 10/22] irqchip/irq-mtk-sysirq: Replace spinlock with raw_spinlock

[Sasha Levin]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

[ Upstream commit 6eeb997ab5075e770a002c51351fa4ec2c6b5c39 ]

This driver may take a regular spinlock when a raw spinlock
(irq_desc->lock) is already taken which results in the following
lockdep splat:

=============================
[ BUG: Invalid wait context ]
5.7.0-rc7 #1 Not tainted
-----------------------------
swapper/0/0 is trying to lock:
ffffff800303b798 (&chip_data->lock){....}-{3:3}, at: mtk_sysirq_set_type+0x48/0xc0
other info that might help us debug this:
context-{5:5}
2 locks held by swapper/0/0:
 #0: ffffff800302ee68 (&desc->request_mutex){....}-{4:4}, at: __setup_irq+0xc4/0x8a0
 #1: ffffff800302ecf0 (&irq_desc_lock_class){....}-{2:2}, at: __setup_irq+0xe4/0x8a0
stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-rc7 #1
Hardware name: Pumpkin MT8516 (DT)
Call trace:
 dump_backtrace+0x0/0x180
 show_stack+0x14/0x20
 dump_stack+0xd0/0x118
 __lock_acquire+0x8c8/0x2270
 lock_acquire+0xf8/0x470
 _raw_spin_lock_irqsave+0x50/0x78
 mtk_sysirq_set_type+0x48/0xc0
 __irq_set_trigger+0x58/0x170
 __setup_irq+0x420/0x8a0
 request_threaded_irq+0xd8/0x190
 timer_of_init+0x1e8/0x2c4
 mtk_gpt_init+0x5c/0x1dc
 timer_probe+0x74/0xf4
 time_init+0x14/0x44
 start_kernel+0x394/0x4f0

Replace the spinlock_t with raw_spinlock_t to avoid this warning.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200615074445.3579-1-brgl@bgdev.pl
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-mtk-sysirq.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/irqchip/irq-mtk-sysirq.c b/drivers/irqchip/irq-mtk-sysirq.c
index 90aaf190157f7..42455f31b0611 100644
--- a/drivers/irqchip/irq-mtk-sysirq.c
+++ b/drivers/irqchip/irq-mtk-sysirq.c
@@ -23,7 +23,7 @@
 #include <linux/spinlock.h>
 
 struct mtk_sysirq_chip_data {
-	spinlock_t lock;
+	raw_spinlock_t lock;
 	u32 nr_intpol_bases;
 	void __iomem **intpol_bases;
 	u32 *intpol_words;
@@ -45,7 +45,7 @@ static int mtk_sysirq_set_type(struct irq_data *data, unsigned int type)
 	reg_index = chip_data->which_word[hwirq];
 	offset = hwirq & 0x1f;
 
-	spin_lock_irqsave(&chip_data->lock, flags);
+	raw_spin_lock_irqsave(&chip_data->lock, flags);
 	value = readl_relaxed(base + reg_index * 4);
 	if (type == IRQ_TYPE_LEVEL_LOW || type == IRQ_TYPE_EDGE_FALLING) {
 		if (type == IRQ_TYPE_LEVEL_LOW)
@@ -61,7 +61,7 @@ static int mtk_sysirq_set_type(struct irq_data *data, unsigned int type)
 
 	data = data->parent_data;
 	ret = data->chip->irq_set_type(data, type);
-	spin_unlock_irqrestore(&chip_data->lock, flags);
+	raw_spin_unlock_irqrestore(&chip_data->lock, flags);
 	return ret;
 }
 
@@ -220,7 +220,7 @@ static int __init mtk_sysirq_of_init(struct device_node *node,
 		ret = -ENOMEM;
 		goto out_free_which_word;
 	}
-	spin_lock_init(&chip_data->lock);
+	raw_spin_lock_init(&chip_data->lock);
 
 	return 0;
 
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 4.14 11/22] mm/mmap.c: Add cond_resched() for exit_mmap() CPU stalls

[Sasha Levin]

From: "Paul E. McKenney" <paulmck@kernel.org>

[ Upstream commit 0a3b3c253a1eb2c7fe7f34086d46660c909abeb3 ]

A large process running on a heavily loaded system can encounter the
following RCU CPU stall warning:

  rcu: INFO: rcu_sched self-detected stall on CPU
  rcu: 	3-....: (20998 ticks this GP) idle=4ea/1/0x4000000000000002 softirq=556558/556558 fqs=5190
  	(t=21013 jiffies g=1005461 q=132576)
  NMI backtrace for cpu 3
  CPU: 3 PID: 501900 Comm: aio-free-ring-w Kdump: loaded Not tainted 5.2.9-108_fbk12_rc3_3858_gb83b75af7909 #1
  Hardware name: Wiwynn   HoneyBadger/PantherPlus, BIOS HBM6.71 02/03/2016
  Call Trace:
   <IRQ>
   dump_stack+0x46/0x60
   nmi_cpu_backtrace.cold.3+0x13/0x50
   ? lapic_can_unplug_cpu.cold.27+0x34/0x34
   nmi_trigger_cpumask_backtrace+0xba/0xca
   rcu_dump_cpu_stacks+0x99/0xc7
   rcu_sched_clock_irq.cold.87+0x1aa/0x397
   ? tick_sched_do_timer+0x60/0x60
   update_process_times+0x28/0x60
   tick_sched_timer+0x37/0x70
   __hrtimer_run_queues+0xfe/0x270
   hrtimer_interrupt+0xf4/0x210
   smp_apic_timer_interrupt+0x5e/0x120
   apic_timer_interrupt+0xf/0x20
   </IRQ>
  RIP: 0010:kmem_cache_free+0x223/0x300
  Code: 88 00 00 00 0f 85 ca 00 00 00 41 8b 55 18 31 f6 f7 da 41 f6 45 0a 02 40 0f 94 c6 83 c6 05 9c 41 5e fa e8 a0 a7 01 00 41 56 9d <49> 8b 47 08 a8 03 0f 85 87 00 00 00 65 48 ff 08 e9 3d fe ff ff 65
  RSP: 0018:ffffc9000e8e3da8 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13
  RAX: 0000000000020000 RBX: ffff88861b9de960 RCX: 0000000000000030
  RDX: fffffffffffe41e8 RSI: 000060777fe3a100 RDI: 000000000001be18
  RBP: ffffea00186e7780 R08: ffffffffffffffff R09: ffffffffffffffff
  R10: ffff88861b9dea28 R11: ffff88887ffde000 R12: ffffffff81230a1f
  R13: ffff888854684dc0 R14: 0000000000000206 R15: ffff8888547dbc00
   ? remove_vma+0x4f/0x60
   remove_vma+0x4f/0x60
   exit_mmap+0xd6/0x160
   mmput+0x4a/0x110
   do_exit+0x278/0xae0
   ? syscall_trace_enter+0x1d3/0x2b0
   ? handle_mm_fault+0xaa/0x1c0
   do_group_exit+0x3a/0xa0
   __x64_sys_exit_group+0x14/0x20
   do_syscall_64+0x42/0x100
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

And on a PREEMPT=n kernel, the "while (vma)" loop in exit_mmap() can run
for a very long time given a large process.  This commit therefore adds
a cond_resched() to this loop, providing RCU any needed quiescent states.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: <linux-mm@kvack.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/mmap.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/mm/mmap.c b/mm/mmap.c
index 8c6ed06983f9e..724b7c4f1a5b5 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -3065,6 +3065,7 @@ void exit_mmap(struct mm_struct *mm)
 		if (vma->vm_flags & VM_ACCOUNT)
 			nr_accounted += vma_pages(vma);
 		vma = remove_vma(vma);
+		cond_resched();
 	}
 	vm_unacct_memory(nr_accounted);
 }
-- 
2.25.1

[PATCH AUTOSEL 4.14 12/22] brcmfmac: To fix Bss Info flag definition Bug

[Sasha Levin]

From: Prasanna Kerekoppa <prasanna.kerekoppa@cypress.com>

[ Upstream commit fa3266541b13f390eb35bdbc38ff4a03368be004 ]

Bss info flag definition need to be fixed from 0x2 to 0x4
This flag is for rssi info received on channel.
All Firmware branches defined as 0x4 and this is bug in brcmfmac.

Signed-off-by: Prasanna Kerekoppa <prasanna.kerekoppa@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Wright Feng <wright.feng@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200604071835.3842-6-wright.feng@cypress.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
index e0d22fedb2b45..05bd636011ec9 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
@@ -30,7 +30,7 @@
 #define BRCMF_ARP_OL_PEER_AUTO_REPLY	0x00000008
 
 #define	BRCMF_BSS_INFO_VERSION	109 /* curr ver of brcmf_bss_info_le struct */
-#define BRCMF_BSS_RSSI_ON_CHANNEL	0x0002
+#define BRCMF_BSS_RSSI_ON_CHANNEL	0x0004
 
 #define BRCMF_STA_WME              0x00000002      /* WMM association */
 #define BRCMF_STA_AUTHE            0x00000008      /* Authenticated */
-- 
2.25.1

[PATCH AUTOSEL 4.14 13/22] brcmfmac: set state of hanger slot to FREE when flushing PSQ

[Sasha Levin]

From: Wright Feng <wright.feng@cypress.com>

[ Upstream commit fcdd7a875def793c38d7369633af3eba6c7cf089 ]

When USB or SDIO device got abnormal bus disconnection, host driver
tried to clean up the skbs in PSQ and TXQ (The skb's pointer in hanger
slot linked to PSQ and TSQ), so we should set the state of skb hanger slot
to BRCMF_FWS_HANGER_ITEM_STATE_FREE before freeing skb.
In brcmf_fws_bus_txq_cleanup it already sets
BRCMF_FWS_HANGER_ITEM_STATE_FREE before freeing skb, therefore we add the
same thing in brcmf_fws_psq_flush to avoid following warning message.

   [ 1580.012880] ------------   [ cut here ]------------
   [ 1580.017550] WARNING: CPU: 3 PID: 3065 at
drivers/net/wireless/broadcom/brcm80211/brcmutil/utils.c:49
brcmu_pkt_buf_free_skb+0x21/0x30 [brcmutil]
   [ 1580.184017] Call Trace:
   [ 1580.186514]  brcmf_fws_cleanup+0x14e/0x190 [brcmfmac]
   [ 1580.191594]  brcmf_fws_del_interface+0x70/0x90 [brcmfmac]
   [ 1580.197029]  brcmf_proto_bcdc_del_if+0xe/0x10 [brcmfmac]
   [ 1580.202418]  brcmf_remove_interface+0x69/0x190 [brcmfmac]
   [ 1580.207888]  brcmf_detach+0x90/0xe0 [brcmfmac]
   [ 1580.212385]  brcmf_usb_disconnect+0x76/0xb0 [brcmfmac]
   [ 1580.217557]  usb_unbind_interface+0x72/0x260
   [ 1580.221857]  device_release_driver_internal+0x141/0x200
   [ 1580.227152]  device_release_driver+0x12/0x20
   [ 1580.231460]  bus_remove_device+0xfd/0x170
   [ 1580.235504]  device_del+0x1d9/0x300
   [ 1580.239041]  usb_disable_device+0x9e/0x270
   [ 1580.243160]  usb_disconnect+0x94/0x270
   [ 1580.246980]  hub_event+0x76d/0x13b0
   [ 1580.250499]  process_one_work+0x144/0x360
   [ 1580.254564]  worker_thread+0x4d/0x3c0
   [ 1580.258247]  kthread+0x109/0x140
   [ 1580.261515]  ? rescuer_thread+0x340/0x340
   [ 1580.265543]  ? kthread_park+0x60/0x60
   [ 1580.269237]  ? SyS_exit_group+0x14/0x20
   [ 1580.273118]  ret_from_fork+0x25/0x30
   [ 1580.300446] ------------   [ cut here ]------------

Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Wright Feng <wright.feng@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200624091608.25154-2-wright.feng@cypress.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c
index 2370060ef980a..0807331284895 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c
@@ -653,6 +653,7 @@ static inline int brcmf_fws_hanger_poppkt(struct brcmf_fws_hanger *h,
 static void brcmf_fws_psq_flush(struct brcmf_fws_info *fws, struct pktq *q,
 				int ifidx)
 {
+	struct brcmf_fws_hanger_item *hi;
 	bool (*matchfn)(struct sk_buff *, void *) = NULL;
 	struct sk_buff *skb;
 	int prec;
@@ -664,6 +665,9 @@ static void brcmf_fws_psq_flush(struct brcmf_fws_info *fws, struct pktq *q,
 		skb = brcmu_pktq_pdeq_match(q, prec, matchfn, &ifidx);
 		while (skb) {
 			hslot = brcmf_skb_htod_tag_get_field(skb, HSLOT);
+			hi = &fws->hanger.items[hslot];
+			WARN_ON(skb != hi->pkt);
+			hi->state = BRCMF_FWS_HANGER_ITEM_STATE_FREE;
 			brcmf_fws_hanger_poppkt(&fws->hanger, hslot, &skb,
 						true);
 			brcmu_pkt_buf_free_skb(skb);
-- 
2.25.1

[PATCH AUTOSEL 4.14 14/22] iwlegacy: Check the return value of pcie_capability_read_*()

[Sasha Levin]

From: Bolarinwa Olayemi Saheed <refactormyself@gmail.com>

[ Upstream commit 9018fd7f2a73e9b290f48a56b421558fa31e8b75 ]

On failure pcie_capability_read_dword() sets it's last parameter, val
to 0. However, with Patch 14/14, it is possible that val is set to ~0 on
failure. This would introduce a bug because (x & x) == (~0 & x).

This bug can be avoided without changing the function's behaviour if the
return value of pcie_capability_read_dword is checked to confirm success.

Check the return value of pcie_capability_read_dword() to ensure success.

Suggested-by: Bjorn Helgaas <bjorn@helgaas.com>
Signed-off-by: Bolarinwa Olayemi Saheed <refactormyself@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200713175529.29715-3-refactormyself@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlegacy/common.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlegacy/common.c b/drivers/net/wireless/intel/iwlegacy/common.c
index 6e6b124f0d5e3..3ca84577803cc 100644
--- a/drivers/net/wireless/intel/iwlegacy/common.c
+++ b/drivers/net/wireless/intel/iwlegacy/common.c
@@ -4302,8 +4302,8 @@ il_apm_init(struct il_priv *il)
 	 *    power savings, even without L1.
 	 */
 	if (il->cfg->set_l0s) {
-		pcie_capability_read_word(il->pci_dev, PCI_EXP_LNKCTL, &lctl);
-		if (lctl & PCI_EXP_LNKCTL_ASPM_L1) {
+		ret = pcie_capability_read_word(il->pci_dev, PCI_EXP_LNKCTL, &lctl);
+		if (!ret && (lctl & PCI_EXP_LNKCTL_ASPM_L1)) {
 			/* L1-ASPM enabled; disable(!) L0S  */
 			il_set_bit(il, CSR_GIO_REG,
 				   CSR_GIO_REG_VAL_L0S_ENABLED);
-- 
2.25.1

[PATCH AUTOSEL 4.14 15/22] gpu: host1x: debug: Fix multiple channels emitting messages simultaneously

[Sasha Levin]

From: Dmitry Osipenko <digetx@gmail.com>

[ Upstream commit 35681862808472a0a4b9a8817ae2789c0b5b3edc ]

Once channel's job is hung, it dumps the channel's state into KMSG before
tearing down the offending job. If multiple channels hang at once, then
they dump messages simultaneously, making the debug info unreadable, and
thus, useless. This patch adds mutex which allows only one channel to emit
debug messages at a time.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/host1x/debug.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/gpu/host1x/debug.c b/drivers/gpu/host1x/debug.c
index 2aae0e63214c2..0b8c23c399c2a 100644
--- a/drivers/gpu/host1x/debug.c
+++ b/drivers/gpu/host1x/debug.c
@@ -25,6 +25,8 @@
 #include "debug.h"
 #include "channel.h"
 
+static DEFINE_MUTEX(debug_lock);
+
 unsigned int host1x_debug_trace_cmdbuf;
 
 static pid_t host1x_debug_force_timeout_pid;
@@ -49,12 +51,14 @@ static int show_channel(struct host1x_channel *ch, void *data, bool show_fifo)
 	struct output *o = data;
 
 	mutex_lock(&ch->cdma.lock);
+	mutex_lock(&debug_lock);
 
 	if (show_fifo)
 		host1x_hw_show_channel_fifo(m, ch, o);
 
 	host1x_hw_show_channel_cdma(m, ch, o);
 
+	mutex_unlock(&debug_lock);
 	mutex_unlock(&ch->cdma.lock);
 
 	return 0;
-- 
2.25.1

[PATCH AUTOSEL 4.14 15/22] gpu: host1x: debug: Fix multiple channels emitting messages simultaneously

[Sasha Levin]

From: Dmitry Osipenko <digetx@gmail.com>

[ Upstream commit 35681862808472a0a4b9a8817ae2789c0b5b3edc ]

Once channel's job is hung, it dumps the channel's state into KMSG before
tearing down the offending job. If multiple channels hang at once, then
they dump messages simultaneously, making the debug info unreadable, and
thus, useless. This patch adds mutex which allows only one channel to emit
debug messages at a time.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/host1x/debug.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/gpu/host1x/debug.c b/drivers/gpu/host1x/debug.c
index 2aae0e63214c2..0b8c23c399c2a 100644
--- a/drivers/gpu/host1x/debug.c
+++ b/drivers/gpu/host1x/debug.c
@@ -25,6 +25,8 @@
 #include "debug.h"
 #include "channel.h"
 
+static DEFINE_MUTEX(debug_lock);
+
 unsigned int host1x_debug_trace_cmdbuf;
 
 static pid_t host1x_debug_force_timeout_pid;
@@ -49,12 +51,14 @@ static int show_channel(struct host1x_channel *ch, void *data, bool show_fifo)
 	struct output *o = data;
 
 	mutex_lock(&ch->cdma.lock);
+	mutex_lock(&debug_lock);
 
 	if (show_fifo)
 		host1x_hw_show_channel_fifo(m, ch, o);
 
 	host1x_hw_show_channel_cdma(m, ch, o);
 
+	mutex_unlock(&debug_lock);
 	mutex_unlock(&ch->cdma.lock);
 
 	return 0;
-- 
2.25.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.14 16/22] usb: gadget: net2280: fix memory leak on probe error handling paths

[Sasha Levin]

From: Evgeny Novikov <novikov@ispras.ru>

[ Upstream commit 2468c877da428ebfd701142c4cdfefcfb7d4c00e ]

Driver does not release memory for device on error handling paths in
net2280_probe() when gadget_release() is not registered yet.

The patch fixes the bug like in other similar drivers.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/udc/net2280.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c
index 170327f84ea19..f1ac9a49e2bf1 100644
--- a/drivers/usb/gadget/udc/net2280.c
+++ b/drivers/usb/gadget/udc/net2280.c
@@ -3786,8 +3786,10 @@ static int net2280_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	return 0;
 
 done:
-	if (dev)
+	if (dev) {
 		net2280_remove(pdev);
+		kfree(dev);
+	}
 	return retval;
 }
 
-- 
2.25.1

[PATCH AUTOSEL 4.14 17/22] bdc: Fix bug causing crash after multiple disconnects

[Sasha Levin]

From: Sasi Kumar <sasi.kumar@broadcom.com>

[ Upstream commit a95bdfd22076497288868c028619bc5995f5cc7f ]

Multiple connects/disconnects can cause a crash on the second
disconnect. The driver had a problem where it would try to send
endpoint commands after it was disconnected which is not allowed
by the hardware. The fix is to only allow the endpoint commands
when the endpoint is connected. This will also fix issues that
showed up when using configfs to create gadgets.

Signed-off-by: Sasi Kumar <sasi.kumar@broadcom.com>
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/udc/bdc/bdc_core.c |  4 ++++
 drivers/usb/gadget/udc/bdc/bdc_ep.c   | 16 ++++++++++------
 2 files changed, 14 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/gadget/udc/bdc/bdc_core.c b/drivers/usb/gadget/udc/bdc/bdc_core.c
index 7a8af4b916cff..2660cc2e42a08 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_core.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_core.c
@@ -288,6 +288,7 @@ static void bdc_mem_init(struct bdc *bdc, bool reinit)
 	 * in that case reinit is passed as 1
 	 */
 	if (reinit) {
+		int i;
 		/* Enable interrupts */
 		temp = bdc_readl(bdc->regs, BDC_BDCSC);
 		temp |= BDC_GIE;
@@ -297,6 +298,9 @@ static void bdc_mem_init(struct bdc *bdc, bool reinit)
 		/* Initialize SRR to 0 */
 		memset(bdc->srr.sr_bds, 0,
 					NUM_SR_ENTRIES * sizeof(struct bdc_bd));
+		/* clear ep flags to avoid post disconnect stops/deconfigs */
+		for (i = 1; i < bdc->num_eps; ++i)
+			bdc->bdc_ep_array[i]->flags = 0;
 	} else {
 		/* One time initiaization only */
 		/* Enable status report function pointers */
diff --git a/drivers/usb/gadget/udc/bdc/bdc_ep.c b/drivers/usb/gadget/udc/bdc/bdc_ep.c
index be9f40bc9c12b..bb2d5ebd97b52 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_ep.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_ep.c
@@ -621,7 +621,6 @@ int bdc_ep_enable(struct bdc_ep *ep)
 	}
 	bdc_dbg_bd_list(bdc, ep);
 	/* only for ep0: config ep is called for ep0 from connect event */
-	ep->flags |= BDC_EP_ENABLED;
 	if (ep->ep_num == 1)
 		return ret;
 
@@ -765,10 +764,13 @@ static int ep_dequeue(struct bdc_ep *ep, struct bdc_req *req)
 					__func__, ep->name, start_bdi, end_bdi);
 	dev_dbg(bdc->dev, "ep_dequeue ep=%p ep->desc=%p\n",
 						ep, (void *)ep->usb_ep.desc);
-	/* Stop the ep to see where the HW is ? */
-	ret = bdc_stop_ep(bdc, ep->ep_num);
-	/* if there is an issue with stopping ep, then no need to go further */
-	if (ret)
+	/* if still connected, stop the ep to see where the HW is ? */
+	if (!(bdc_readl(bdc->regs, BDC_USPC) & BDC_PST_MASK)) {
+		ret = bdc_stop_ep(bdc, ep->ep_num);
+		/* if there is an issue, then no need to go further */
+		if (ret)
+			return 0;
+	} else
 		return 0;
 
 	/*
@@ -1917,7 +1919,9 @@ static int bdc_gadget_ep_disable(struct usb_ep *_ep)
 		__func__, ep->name, ep->flags);
 
 	if (!(ep->flags & BDC_EP_ENABLED)) {
-		dev_warn(bdc->dev, "%s is already disabled\n", ep->name);
+		if (bdc->gadget.speed != USB_SPEED_UNKNOWN)
+			dev_warn(bdc->dev, "%s is already disabled\n",
+				 ep->name);
 		return 0;
 	}
 	spin_lock_irqsave(&bdc->lock, flags);
-- 
2.25.1

[PATCH AUTOSEL 4.14 18/22] usb: bdc: Halt controller on suspend

[Sasha Levin]

From: Danesh Petigara <danesh.petigara@broadcom.com>

[ Upstream commit 5fc453d7de3d0c345812453823a3a56783c5f82c ]

GISB bus error kernel panics have been observed during S2 transition
tests on the 7271t platform. The errors are a result of the BDC
interrupt handler trying to access BDC register space after the
system's suspend callbacks have completed.

Adding a suspend hook to the BDC driver that halts the controller before
S2 entry thus preventing unwanted access to the BDC register space during
this transition.

Signed-off-by: Danesh Petigara <danesh.petigara@broadcom.com>
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/udc/bdc/bdc_core.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/udc/bdc/bdc_core.c b/drivers/usb/gadget/udc/bdc/bdc_core.c
index 2660cc2e42a08..58ba04d858bab 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_core.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_core.c
@@ -613,9 +613,14 @@ static int bdc_remove(struct platform_device *pdev)
 static int bdc_suspend(struct device *dev)
 {
 	struct bdc *bdc = dev_get_drvdata(dev);
+	int ret;
 
-	clk_disable_unprepare(bdc->clk);
-	return 0;
+	/* Halt the controller */
+	ret = bdc_stop(bdc);
+	if (!ret)
+		clk_disable_unprepare(bdc->clk);
+
+	return ret;
 }
 
 static int bdc_resume(struct device *dev)
-- 
2.25.1

[PATCH AUTOSEL 4.14 19/22] dyndbg: fix a BUG_ON in ddebug_describe_flags

[Sasha Levin]

From: Jim Cromie <jim.cromie@gmail.com>

[ Upstream commit f678ce8cc3cb2ad29df75d8824c74f36398ba871 ]

ddebug_describe_flags() currently fills a caller provided string buffer,
after testing its size (also passed) in a BUG_ON.  Fix this by
replacing them with a known-big-enough string buffer wrapped in a
struct, and passing that instead.

Also simplify ddebug_describe_flags() flags parameter from a struct to
a member in that struct, and hoist the member deref up to the caller.
This makes the function reusable (soon) where flags are unpacked.

Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-8-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/dynamic_debug.c | 23 +++++++++++------------
 1 file changed, 11 insertions(+), 12 deletions(-)

diff --git a/lib/dynamic_debug.c b/lib/dynamic_debug.c
index c7c96bc7654af..91c451e0f4741 100644
--- a/lib/dynamic_debug.c
+++ b/lib/dynamic_debug.c
@@ -85,22 +85,22 @@ static struct { unsigned flag:8; char opt_char; } opt_array[] = {
 	{ _DPRINTK_FLAGS_NONE, '_' },
 };
 
+struct flagsbuf { char buf[ARRAY_SIZE(opt_array)+1]; };
+
 /* format a string into buf[] which describes the _ddebug's flags */
-static char *ddebug_describe_flags(struct _ddebug *dp, char *buf,
-				    size_t maxlen)
+static char *ddebug_describe_flags(unsigned int flags, struct flagsbuf *fb)
 {
-	char *p = buf;
+	char *p = fb->buf;
 	int i;
 
-	BUG_ON(maxlen < 6);
 	for (i = 0; i < ARRAY_SIZE(opt_array); ++i)
-		if (dp->flags & opt_array[i].flag)
+		if (flags & opt_array[i].flag)
 			*p++ = opt_array[i].opt_char;
-	if (p == buf)
+	if (p == fb->buf)
 		*p++ = '_';
 	*p = '\0';
 
-	return buf;
+	return fb->buf;
 }
 
 #define vpr_info(fmt, ...)					\
@@ -142,7 +142,7 @@ static int ddebug_change(const struct ddebug_query *query,
 	struct ddebug_table *dt;
 	unsigned int newflags;
 	unsigned int nfound = 0;
-	char flagbuf[10];
+	struct flagsbuf fbuf;
 
 	/* search for matching ddebugs */
 	mutex_lock(&ddebug_lock);
@@ -199,8 +199,7 @@ static int ddebug_change(const struct ddebug_query *query,
 			vpr_info("changed %s:%d [%s]%s =%s\n",
 				 trim_prefix(dp->filename), dp->lineno,
 				 dt->mod_name, dp->function,
-				 ddebug_describe_flags(dp, flagbuf,
-						       sizeof(flagbuf)));
+				 ddebug_describe_flags(dp->flags, &fbuf));
 		}
 	}
 	mutex_unlock(&ddebug_lock);
@@ -779,7 +778,7 @@ static int ddebug_proc_show(struct seq_file *m, void *p)
 {
 	struct ddebug_iter *iter = m->private;
 	struct _ddebug *dp = p;
-	char flagsbuf[10];
+	struct flagsbuf flags;
 
 	vpr_info("called m=%p p=%p\n", m, p);
 
@@ -792,7 +791,7 @@ static int ddebug_proc_show(struct seq_file *m, void *p)
 	seq_printf(m, "%s:%u [%s]%s =%s \"",
 		   trim_prefix(dp->filename), dp->lineno,
 		   iter->table->mod_name, dp->function,
-		   ddebug_describe_flags(dp, flagsbuf, sizeof(flagsbuf)));
+		   ddebug_describe_flags(dp->flags, &flags));
 	seq_escape(m, dp->format, "\t\r\n\"");
 	seq_puts(m, "\"\n");
 
-- 
2.25.1

[PATCH AUTOSEL 4.14 20/22] dyndbg: prefer declarative init in caller, to memset in callee

[Sasha Levin]

From: Jim Cromie <jim.cromie@gmail.com>

[ Upstream commit 9c9d0acbe2793315fa6945a19685ad2a51fb281b ]

ddebug_exec_query declares an auto var, and passes it to
ddebug_parse_query, which memsets it before using it.  Drop that
memset, instead initialize the variable in the caller; let the
compiler decide how to do it.

Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-10-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/dynamic_debug.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/lib/dynamic_debug.c b/lib/dynamic_debug.c
index 91c451e0f4741..a95557f9e8d55 100644
--- a/lib/dynamic_debug.c
+++ b/lib/dynamic_debug.c
@@ -325,7 +325,6 @@ static int ddebug_parse_query(char *words[], int nwords,
 		pr_err("expecting pairs of match-spec <value>\n");
 		return -EINVAL;
 	}
-	memset(query, 0, sizeof(*query));
 
 	if (modname)
 		/* support $modname.dyndbg=<multiple queries> */
@@ -443,7 +442,7 @@ static int ddebug_parse_flags(const char *str, unsigned int *flagsp,
 static int ddebug_exec_query(char *query_string, const char *modname)
 {
 	unsigned int flags = 0, mask = 0;
-	struct ddebug_query query;
+	struct ddebug_query query = {};
 #define MAXWORDS 9
 	int nwords, nfound;
 	char *words[MAXWORDS];
-- 
2.25.1

[PATCH AUTOSEL 4.14 21/22] bcache: fix super block seq numbers comparision in register_cache_set()

[Sasha Levin]

From: Coly Li <colyli@suse.de>

[ Upstream commit 117f636ea695270fe492d0c0c9dfadc7a662af47 ]

In register_cache_set(), c is pointer to struct cache_set, and ca is
pointer to struct cache, if ca->sb.seq > c->sb.seq, it means this
registering cache has up to date version and other members, the in-
memory version and other members should be updated to the newer value.

But current implementation makes a cache set only has a single cache
device, so the above assumption works well except for a special case.
The execption is when a cache device new created and both ca->sb.seq and
c->sb.seq are 0, because the super block is never flushed out yet. In
the location for the following if() check,
2156         if (ca->sb.seq > c->sb.seq) {
2157                 c->sb.version           = ca->sb.version;
2158                 memcpy(c->sb.set_uuid, ca->sb.set_uuid, 16);
2159                 c->sb.flags             = ca->sb.flags;
2160                 c->sb.seq               = ca->sb.seq;
2161                 pr_debug("set version = %llu\n", c->sb.version);
2162         }
c->sb.version is not initialized yet and valued 0. When ca->sb.seq is 0,
the if() check will fail (because both values are 0), and the cache set
version, set_uuid, flags and seq won't be updated.

The above problem is hiden for current code, because the bucket size is
compatible among different super block version. And the next time when
running cache set again, ca->sb.seq will be larger than 0 and cache set
super block version will be updated properly.

But if the large bucket feature is enabled,  sb->bucket_size is the low
16bits of the bucket size. For a power of 2 value, when the actual
bucket size exceeds 16bit width, sb->bucket_size will always be 0. Then
read_super_common() will fail because the if() check to
is_power_of_2(sb->bucket_size) is false. This is how the long time
hidden bug is triggered.

This patch modifies the if() check to the following way,
2156         if (ca->sb.seq > c->sb.seq || c->sb.seq == 0) {
Then cache set's version, set_uuid, flags and seq will always be updated
corectly including for a new created cache device.

Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/bcache/super.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c
index 690aeb09bbf55..32498b912ce7c 100644
--- a/drivers/md/bcache/super.c
+++ b/drivers/md/bcache/super.c
@@ -1780,7 +1780,14 @@ static const char *register_cache_set(struct cache *ca)
 	    sysfs_create_link(&c->kobj, &ca->kobj, buf))
 		goto err;
 
-	if (ca->sb.seq > c->sb.seq) {
+	/*
+	 * A special case is both ca->sb.seq and c->sb.seq are 0,
+	 * such condition happens on a new created cache device whose
+	 * super block is never flushed yet. In this case c->sb.version
+	 * and other members should be updated too, otherwise we will
+	 * have a mistaken super block version in cache set.
+	 */
+	if (ca->sb.seq > c->sb.seq || c->sb.seq == 0) {
 		c->sb.version		= ca->sb.version;
 		memcpy(c->sb.set_uuid, ca->sb.set_uuid, 16);
 		c->sb.flags             = ca->sb.flags;
-- 
2.25.1

[PATCH AUTOSEL 4.14 22/22] ACPICA: Do not increment operation_region reference counts for field units

[Sasha Levin]

From: Erik Kaneda <erik.kaneda@intel.com>

[ Upstream commit 6a54ebae6d047c988a31f5ac5a64ab5cf83797a2 ]

ACPICA commit e17b28cfcc31918d0db9547b6b274b09c413eb70

Object reference counts are used as a part of ACPICA's garbage
collection mechanism. This mechanism keeps track of references to
heap-allocated structures such as the ACPI operand objects.

Recent server firmware has revealed that this reference count can
overflow on large servers that declare many field units under the
same operation_region. This occurs because each field unit declaration
will add a reference count to the source operation_region.

This change solves the reference count overflow for operation_regions
objects by preventing fieldunits from incrementing their
operation_region's reference count. Each operation_region's reference
count will not be changed by named objects declared under the Field
operator. During namespace deletion, the operation_region namespace
node will be deleted and each fieldunit will be deleted without
touching the deleted operation_region object.

Link: https://github.com/acpica/acpica/commit/e17b28cf
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/acpica/exprep.c   | 4 ----
 drivers/acpi/acpica/utdelete.c | 6 +-----
 2 files changed, 1 insertion(+), 9 deletions(-)

diff --git a/drivers/acpi/acpica/exprep.c b/drivers/acpi/acpica/exprep.c
index 8de060664204e..e23f3d54bb31c 100644
--- a/drivers/acpi/acpica/exprep.c
+++ b/drivers/acpi/acpica/exprep.c
@@ -507,10 +507,6 @@ acpi_status acpi_ex_prep_field_value(struct acpi_create_field_info *info)
 				    (u8)access_byte_width;
 			}
 		}
-		/* An additional reference for the container */
-
-		acpi_ut_add_reference(obj_desc->field.region_obj);
-
 		ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
 				  "RegionField: BitOff %X, Off %X, Gran %X, Region %p\n",
 				  obj_desc->field.start_field_bit_offset,
diff --git a/drivers/acpi/acpica/utdelete.c b/drivers/acpi/acpica/utdelete.c
index c6eb9fae70f9a..61a979d0fbc5a 100644
--- a/drivers/acpi/acpica/utdelete.c
+++ b/drivers/acpi/acpica/utdelete.c
@@ -593,11 +593,6 @@ acpi_ut_update_object_reference(union acpi_operand_object *object, u16 action)
 			next_object = object->buffer_field.buffer_obj;
 			break;
 
-		case ACPI_TYPE_LOCAL_REGION_FIELD:
-
-			next_object = object->field.region_obj;
-			break;
-
 		case ACPI_TYPE_LOCAL_BANK_FIELD:
 
 			next_object = object->bank_field.bank_obj;
@@ -638,6 +633,7 @@ acpi_ut_update_object_reference(union acpi_operand_object *object, u16 action)
 			}
 			break;
 
+		case ACPI_TYPE_LOCAL_REGION_FIELD:
 		case ACPI_TYPE_REGION:
 		default:
 
-- 
2.25.1