Re: [PATCH v4 3/5] fpga manager: xilinx-spi: fix write_complete timeout handling

[Moritz Fischer <mdf@kernel.org>]

On Sun, Aug 30, 2020 at 06:38:48PM +0200, Luca Ceresoli wrote:
> If this routine sleeps because it was scheduled out, it might miss DONE
> going asserted and consider it a timeout. This would potentially make the
> code return an error even when programming succeeded. Rewrite the loop to
> always check DONE after checking if timeout expired so this cannot happen
> anymore.
> 
> While there, also add error checking for gpiod_get_value(). Also avoid
> checking the DONE GPIO in two places, which would make the error-checking
> code duplicated and more annoying.
> 
> The new loop it written to still guarantee that we apply 8 extra CCLK
> cycles after DONE has gone asserted, which is required by the hardware.
> 
> Reported-by: Tom Rix <trix@redhat.com>
> Reviewed-by: Tom Rix <trix@redhat.com>
> Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
> 
> ---
> 
> Changes in v4:
>  - add Reviewed-by Tom Rix
>  - fix uninitialized variable
>    (Reported-by: kernel test robot <lkp@intel.com>)
> 
> Changes in v3:
>  - completely rewrite the loop after Tom pointed out the 'sleep' bug
> 
> This patch is new in v2
> ---
>  drivers/fpga/xilinx-spi.c | 23 +++++++++++++++--------
>  1 file changed, 15 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/fpga/xilinx-spi.c b/drivers/fpga/xilinx-spi.c
> index 01f494172379..fba8eb4866a7 100644
> --- a/drivers/fpga/xilinx-spi.c
> +++ b/drivers/fpga/xilinx-spi.c
> @@ -151,22 +151,29 @@ static int xilinx_spi_write_complete(struct fpga_manager *mgr,
>  				     struct fpga_image_info *info)
>  {
>  	struct xilinx_spi_conf *conf = mgr->priv;
> -	unsigned long timeout;
> +	unsigned long timeout = jiffies + usecs_to_jiffies(info->config_complete_timeout_us);
> +	bool expired = false;
> +	int done;
>  	int ret;
>  
> -	if (gpiod_get_value(conf->done))
> -		return xilinx_spi_apply_cclk_cycles(conf);
> +	/*
> +	 * This loop is carefully written such that if the driver is
> +	 * scheduled out for more than 'timeout', we still check for DONE
> +	 * before giving up and we apply 8 extra CCLK cycles in all cases.
> +	 */
> +	while (!expired) {
> +		expired = time_after(jiffies, timeout);
>  
> -	timeout = jiffies + usecs_to_jiffies(info->config_complete_timeout_us);
> -
> -	while (time_before(jiffies, timeout)) {
> +		done = get_done_gpio(mgr);
> +		if (done < 0)
> +			return done;
>  
>  		ret = xilinx_spi_apply_cclk_cycles(conf);
>  		if (ret)
>  			return ret;
>  
> -		if (gpiod_get_value(conf->done))
> -			return xilinx_spi_apply_cclk_cycles(conf);
> +		if (done)
> +			return 0;
>  	}
>  
>  	dev_err(&mgr->dev, "Timeout after config data transfer\n");
> -- 
> 2.28.0
> 

Applied to for-next,

Thanks