From: Kalle Valo <kvalo@codeaurora.org>
To: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: davem@davemloft.net, kuba@kernel.org, vaibhavgupta40@gmail.com,
linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org, kernel-janitors@vger.kernel.org
Subject: Re: [PATCH] rtl818x_pci: switch from 'pci_' to 'dma_' API
Date: Tue, 01 Sep 2020 09:34:34 +0000 [thread overview]
Message-ID: <20200901093434.D3E8DC43391@smtp.codeaurora.org> (raw)
In-Reply-To: <20200819210852.120826-1-christophe.jaillet@wanadoo.fr>
Christophe JAILLET <christophe.jaillet@wanadoo.fr> wrote:
> The wrappers in include/linux/pci-dma-compat.h should go away.
>
> The patch has been generated with the coccinelle script below and has been
> hand modified to replace GFP_ with a correct flag.
> It has been compile tested.
>
> When memory is allocated in 'rtl8180_init_rx_ring()' and
> 'rtl8180_init_tx_ring()' GFP_KERNEL can be used because both functions are
> called from 'rtl8180_start()', which is a .start function (see struct
> ieee80211_ops)
> .start function can sleep, as explicitly stated in include/net/mac80211.h.
>
>
> @@
> @@
> - PCI_DMA_BIDIRECTIONAL
> + DMA_BIDIRECTIONAL
>
> @@
> @@
> - PCI_DMA_TODEVICE
> + DMA_TO_DEVICE
>
> @@
> @@
> - PCI_DMA_FROMDEVICE
> + DMA_FROM_DEVICE
>
> @@
> @@
> - PCI_DMA_NONE
> + DMA_NONE
>
> @@
> expression e1, e2, e3;
> @@
> - pci_alloc_consistent(e1, e2, e3)
> + dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
>
> @@
> expression e1, e2, e3;
> @@
> - pci_zalloc_consistent(e1, e2, e3)
> + dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_free_consistent(e1, e2, e3, e4)
> + dma_free_coherent(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_map_single(e1, e2, e3, e4)
> + dma_map_single(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_unmap_single(e1, e2, e3, e4)
> + dma_unmap_single(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4, e5;
> @@
> - pci_map_page(e1, e2, e3, e4, e5)
> + dma_map_page(&e1->dev, e2, e3, e4, e5)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_unmap_page(e1, e2, e3, e4)
> + dma_unmap_page(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_map_sg(e1, e2, e3, e4)
> + dma_map_sg(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_unmap_sg(e1, e2, e3, e4)
> + dma_unmap_sg(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
> + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_dma_sync_single_for_device(e1, e2, e3, e4)
> + dma_sync_single_for_device(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
> + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_dma_sync_sg_for_device(e1, e2, e3, e4)
> + dma_sync_sg_for_device(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2;
> @@
> - pci_dma_mapping_error(e1, e2)
> + dma_mapping_error(&e1->dev, e2)
>
> @@
> expression e1, e2;
> @@
> - pci_set_dma_mask(e1, e2)
> + dma_set_mask(&e1->dev, e2)
>
> @@
> expression e1, e2;
> @@
> - pci_set_consistent_dma_mask(e1, e2)
> + dma_set_coherent_mask(&e1->dev, e2)
>
> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Patch applied to wireless-drivers-next.git, thanks.
f4ce4bf6687f rtl818x_pci: switch from 'pci_' to 'dma_' API
--
https://patchwork.kernel.org/patch/11725047/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
WARNING: multiple messages have this Message-ID (diff)
From: Kalle Valo <kvalo@codeaurora.org>
To: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: davem@davemloft.net, kuba@kernel.org, vaibhavgupta40@gmail.com,
linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org, kernel-janitors@vger.kernel.org,
Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Subject: Re: [PATCH] rtl818x_pci: switch from 'pci_' to 'dma_' API
Date: Tue, 1 Sep 2020 09:34:34 +0000 (UTC) [thread overview]
Message-ID: <20200901093434.D3E8DC43391@smtp.codeaurora.org> (raw)
In-Reply-To: <20200819210852.120826-1-christophe.jaillet@wanadoo.fr>
Christophe JAILLET <christophe.jaillet@wanadoo.fr> wrote:
> The wrappers in include/linux/pci-dma-compat.h should go away.
>
> The patch has been generated with the coccinelle script below and has been
> hand modified to replace GFP_ with a correct flag.
> It has been compile tested.
>
> When memory is allocated in 'rtl8180_init_rx_ring()' and
> 'rtl8180_init_tx_ring()' GFP_KERNEL can be used because both functions are
> called from 'rtl8180_start()', which is a .start function (see struct
> ieee80211_ops)
> .start function can sleep, as explicitly stated in include/net/mac80211.h.
>
>
> @@
> @@
> - PCI_DMA_BIDIRECTIONAL
> + DMA_BIDIRECTIONAL
>
> @@
> @@
> - PCI_DMA_TODEVICE
> + DMA_TO_DEVICE
>
> @@
> @@
> - PCI_DMA_FROMDEVICE
> + DMA_FROM_DEVICE
>
> @@
> @@
> - PCI_DMA_NONE
> + DMA_NONE
>
> @@
> expression e1, e2, e3;
> @@
> - pci_alloc_consistent(e1, e2, e3)
> + dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
>
> @@
> expression e1, e2, e3;
> @@
> - pci_zalloc_consistent(e1, e2, e3)
> + dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_free_consistent(e1, e2, e3, e4)
> + dma_free_coherent(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_map_single(e1, e2, e3, e4)
> + dma_map_single(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_unmap_single(e1, e2, e3, e4)
> + dma_unmap_single(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4, e5;
> @@
> - pci_map_page(e1, e2, e3, e4, e5)
> + dma_map_page(&e1->dev, e2, e3, e4, e5)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_unmap_page(e1, e2, e3, e4)
> + dma_unmap_page(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_map_sg(e1, e2, e3, e4)
> + dma_map_sg(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_unmap_sg(e1, e2, e3, e4)
> + dma_unmap_sg(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
> + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_dma_sync_single_for_device(e1, e2, e3, e4)
> + dma_sync_single_for_device(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
> + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_dma_sync_sg_for_device(e1, e2, e3, e4)
> + dma_sync_sg_for_device(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2;
> @@
> - pci_dma_mapping_error(e1, e2)
> + dma_mapping_error(&e1->dev, e2)
>
> @@
> expression e1, e2;
> @@
> - pci_set_dma_mask(e1, e2)
> + dma_set_mask(&e1->dev, e2)
>
> @@
> expression e1, e2;
> @@
> - pci_set_consistent_dma_mask(e1, e2)
> + dma_set_coherent_mask(&e1->dev, e2)
>
> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Patch applied to wireless-drivers-next.git, thanks.
f4ce4bf6687f rtl818x_pci: switch from 'pci_' to 'dma_' API
--
https://patchwork.kernel.org/patch/11725047/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
next prev parent reply other threads:[~2020-09-01 9:34 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-19 21:08 [PATCH] rtl818x_pci: switch from 'pci_' to 'dma_' API Christophe JAILLET
2020-08-19 21:08 ` Christophe JAILLET
2020-09-01 9:34 ` Kalle Valo [this message]
2020-09-01 9:34 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200901093434.D3E8DC43391@smtp.codeaurora.org \
--to=kvalo@codeaurora.org \
--cc=christophe.jaillet@wanadoo.fr \
--cc=davem@davemloft.net \
--cc=kernel-janitors@vger.kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=vaibhavgupta40@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.