From: Neil Armstrong <narmstrong@baylibre.com>
To: kishon@ti.com, devicetree@vger.kernel.org
Cc: linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCH 1/2] dt-bindings: phy: add Amlogic AXG MIPI D-PHY bindings
Date: Mon, 7 Sep 2020 09:27:07 +0200 [thread overview]
Message-ID: <20200907072708.26043-2-narmstrong@baylibre.com> (raw)
In-Reply-To: <20200907072708.26043-1-narmstrong@baylibre.com>
The Amlogic AXg SoCs embeds a MIPI D-PHY to communicate with DSI
panels, this adds the bindings.
This D-PHY depends on a separate analog PHY.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
.../bindings/phy/amlogic,axg-mipi-dphy.yaml | 68 +++++++++++++++++++
1 file changed, 68 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/amlogic,axg-mipi-dphy.yaml
diff --git a/Documentation/devicetree/bindings/phy/amlogic,axg-mipi-dphy.yaml b/Documentation/devicetree/bindings/phy/amlogic,axg-mipi-dphy.yaml
new file mode 100644
index 000000000000..f7ae1135288b
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/amlogic,axg-mipi-dphy.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 BayLibre, SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/amlogic,axg-mipi-dphy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic AXG MIPI D-PHY
+
+maintainers:
+ - Neil Armstrong <narmstrong@baylibre.com>
+
+properties:
+ compatible:
+ enum:
+ - amlogic,axg-mipi-dphy
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: pclk
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: phy
+
+ "#phy-cells":
+ const: 0
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ items:
+ - const: analog
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - phys
+ - phy-names
+ - "#phy-cells"
+
+examples:
+ - |
+ phy@ff640000 {
+ compatible = "amlogic,axg-mipi-dphy";
+ reg = <0xff640000 0x100>;
+ clocks = <&clk_mipi_dsi_phy>;
+ clock-names = "pclk";
+ resets = <&reset_phy>;
+ reset-names = "phy";
+ phys = <&mipi_pcie_analog_dphy>;
+ phy-names = "analog";
+ #phy-cells = <0>;
+ };
--
2.22.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
WARNING: multiple messages have this Message-ID (diff)
From: Neil Armstrong <narmstrong@baylibre.com>
To: kishon@ti.com, devicetree@vger.kernel.org
Cc: linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCH 1/2] dt-bindings: phy: add Amlogic AXG MIPI D-PHY bindings
Date: Mon, 7 Sep 2020 09:27:07 +0200 [thread overview]
Message-ID: <20200907072708.26043-2-narmstrong@baylibre.com> (raw)
In-Reply-To: <20200907072708.26043-1-narmstrong@baylibre.com>
The Amlogic AXg SoCs embeds a MIPI D-PHY to communicate with DSI
panels, this adds the bindings.
This D-PHY depends on a separate analog PHY.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
.../bindings/phy/amlogic,axg-mipi-dphy.yaml | 68 +++++++++++++++++++
1 file changed, 68 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/amlogic,axg-mipi-dphy.yaml
diff --git a/Documentation/devicetree/bindings/phy/amlogic,axg-mipi-dphy.yaml b/Documentation/devicetree/bindings/phy/amlogic,axg-mipi-dphy.yaml
new file mode 100644
index 000000000000..f7ae1135288b
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/amlogic,axg-mipi-dphy.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 BayLibre, SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/amlogic,axg-mipi-dphy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic AXG MIPI D-PHY
+
+maintainers:
+ - Neil Armstrong <narmstrong@baylibre.com>
+
+properties:
+ compatible:
+ enum:
+ - amlogic,axg-mipi-dphy
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: pclk
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: phy
+
+ "#phy-cells":
+ const: 0
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ items:
+ - const: analog
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - phys
+ - phy-names
+ - "#phy-cells"
+
+examples:
+ - |
+ phy@ff640000 {
+ compatible = "amlogic,axg-mipi-dphy";
+ reg = <0xff640000 0x100>;
+ clocks = <&clk_mipi_dsi_phy>;
+ clock-names = "pclk";
+ resets = <&reset_phy>;
+ reset-names = "phy";
+ phys = <&mipi_pcie_analog_dphy>;
+ phy-names = "analog";
+ #phy-cells = <0>;
+ };
--
2.22.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Neil Armstrong <narmstrong@baylibre.com>
To: kishon@ti.com, devicetree@vger.kernel.org
Cc: linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCH 1/2] dt-bindings: phy: add Amlogic AXG MIPI D-PHY bindings
Date: Mon, 7 Sep 2020 09:27:07 +0200 [thread overview]
Message-ID: <20200907072708.26043-2-narmstrong@baylibre.com> (raw)
In-Reply-To: <20200907072708.26043-1-narmstrong@baylibre.com>
The Amlogic AXg SoCs embeds a MIPI D-PHY to communicate with DSI
panels, this adds the bindings.
This D-PHY depends on a separate analog PHY.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
.../bindings/phy/amlogic,axg-mipi-dphy.yaml | 68 +++++++++++++++++++
1 file changed, 68 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/amlogic,axg-mipi-dphy.yaml
diff --git a/Documentation/devicetree/bindings/phy/amlogic,axg-mipi-dphy.yaml b/Documentation/devicetree/bindings/phy/amlogic,axg-mipi-dphy.yaml
new file mode 100644
index 000000000000..f7ae1135288b
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/amlogic,axg-mipi-dphy.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 BayLibre, SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/amlogic,axg-mipi-dphy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic AXG MIPI D-PHY
+
+maintainers:
+ - Neil Armstrong <narmstrong@baylibre.com>
+
+properties:
+ compatible:
+ enum:
+ - amlogic,axg-mipi-dphy
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: pclk
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: phy
+
+ "#phy-cells":
+ const: 0
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ items:
+ - const: analog
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - phys
+ - phy-names
+ - "#phy-cells"
+
+examples:
+ - |
+ phy@ff640000 {
+ compatible = "amlogic,axg-mipi-dphy";
+ reg = <0xff640000 0x100>;
+ clocks = <&clk_mipi_dsi_phy>;
+ clock-names = "pclk";
+ resets = <&reset_phy>;
+ reset-names = "phy";
+ phys = <&mipi_pcie_analog_dphy>;
+ phy-names = "analog";
+ #phy-cells = <0>;
+ };
--
2.22.0
next prev parent reply other threads:[~2020-09-07 7:28 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-07 7:27 [PATCH 0/2] phy: amlogic: Add support for AXG MIPI D-PHY Neil Armstrong
2020-09-07 7:27 ` Neil Armstrong
2020-09-07 7:27 ` Neil Armstrong
2020-09-07 7:27 ` Neil Armstrong [this message]
2020-09-07 7:27 ` [PATCH 1/2] dt-bindings: phy: add Amlogic AXG MIPI D-PHY bindings Neil Armstrong
2020-09-07 7:27 ` Neil Armstrong
2020-09-15 15:27 ` Rob Herring
2020-09-15 15:27 ` Rob Herring
2020-09-15 15:27 ` Rob Herring
2020-09-07 7:27 ` [PATCH 2/2] phy: amlogic: Add AXG MIPI D-PHY driver Neil Armstrong
2020-09-07 7:27 ` Neil Armstrong
2020-09-07 7:27 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200907072708.26043-2-narmstrong@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=kishon@ti.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.