From: Eddie James <eajames@linux.ibm.com>
To: linux-aspeed@lists.ozlabs.org
Subject: [PATCH v2 0/5] input: misc: Add IBM Operation Panel driver
Date: Tue, 8 Sep 2020 15:00:56 -0500 [thread overview]
Message-ID: <20200908200101.64974-1-eajames@linux.ibm.com> (raw)
This series adds support for input from the IBM Operation Panel, which is
a simple controller with three buttons and an LCD display meant for
interacting with a server. It's connected over I2C, typically to a service
processor. This series only supports the input from the panel, in which the
panel masters the I2C bus and sends data to the host system when someone
presses a button on the controller.
Changes since v1:
- Redo DTS documentation example to use I2C_OWN_SLAVE_ADDRESS
- Reject commands received in the input driver that are too long
- Add a definition for the interrupt status mask in the Aspeed I2C driver
- Use I2C_OWN_SLAVE_ADDRESS for both dts additions
Eddie James (5):
dt-bindings: input: Add documentation for IBM Operation Panel
input: misc: Add IBM Operation Panel driver
i2c: aspeed: Mask IRQ status to relevant bits
ARM: dts: Aspeed: Tacoma: Add IBM Operation Panel I2C device
ARM: dts: Aspeed: Rainier: Add IBM Operation Panel I2C device
.../bindings/input/ibm,op-panel.yaml | 39 ++++
MAINTAINERS | 7 +
arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 7 +
arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts | 7 +
drivers/i2c/busses/i2c-aspeed.c | 2 +
drivers/input/misc/Kconfig | 18 ++
drivers/input/misc/Makefile | 1 +
drivers/input/misc/ibm-panel.c | 192 ++++++++++++++++++
8 files changed, 273 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/ibm,op-panel.yaml
create mode 100644 drivers/input/misc/ibm-panel.c
--
2.26.2
WARNING: multiple messages have this Message-ID (diff)
From: Eddie James <eajames@linux.ibm.com>
To: linux-input@vger.kernel.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-aspeed@lists.ozlabs.org, linux-i2c@vger.kernel.org,
joel@jms.id.au, andrew@aj.id.au, benh@kernel.crashing.org,
brendanhiggins@google.com, dmitry.torokhov@gmail.com,
robh+dt@kernel.org, wsa@kernel.org, rentao.bupt@gmail.com,
ryan_chen@aspeedtech.com
Subject: [PATCH v2 0/5] input: misc: Add IBM Operation Panel driver
Date: Tue, 8 Sep 2020 15:00:56 -0500 [thread overview]
Message-ID: <20200908200101.64974-1-eajames@linux.ibm.com> (raw)
This series adds support for input from the IBM Operation Panel, which is
a simple controller with three buttons and an LCD display meant for
interacting with a server. It's connected over I2C, typically to a service
processor. This series only supports the input from the panel, in which the
panel masters the I2C bus and sends data to the host system when someone
presses a button on the controller.
Changes since v1:
- Redo DTS documentation example to use I2C_OWN_SLAVE_ADDRESS
- Reject commands received in the input driver that are too long
- Add a definition for the interrupt status mask in the Aspeed I2C driver
- Use I2C_OWN_SLAVE_ADDRESS for both dts additions
Eddie James (5):
dt-bindings: input: Add documentation for IBM Operation Panel
input: misc: Add IBM Operation Panel driver
i2c: aspeed: Mask IRQ status to relevant bits
ARM: dts: Aspeed: Tacoma: Add IBM Operation Panel I2C device
ARM: dts: Aspeed: Rainier: Add IBM Operation Panel I2C device
.../bindings/input/ibm,op-panel.yaml | 39 ++++
MAINTAINERS | 7 +
arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 7 +
arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts | 7 +
drivers/i2c/busses/i2c-aspeed.c | 2 +
drivers/input/misc/Kconfig | 18 ++
drivers/input/misc/Makefile | 1 +
drivers/input/misc/ibm-panel.c | 192 ++++++++++++++++++
8 files changed, 273 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/ibm,op-panel.yaml
create mode 100644 drivers/input/misc/ibm-panel.c
--
2.26.2
next reply other threads:[~2020-09-08 20:00 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-08 20:00 Eddie James [this message]
2020-09-08 20:00 ` [PATCH v2 0/5] input: misc: Add IBM Operation Panel driver Eddie James
2020-09-08 20:00 ` [PATCH v2 1/5] dt-bindings: input: Add documentation for IBM Operation Panel Eddie James
2020-09-08 20:00 ` Eddie James
2020-09-08 20:00 ` [PATCH v2 2/5] input: misc: Add IBM Operation Panel driver Eddie James
2020-09-08 20:00 ` Eddie James
2020-09-08 20:40 ` wsa
2020-09-08 20:40 ` wsa
2020-09-08 20:00 ` [PATCH v2 3/5] i2c: aspeed: Mask IRQ status to relevant bits Eddie James
2020-09-08 20:00 ` Eddie James
2020-09-09 2:59 ` Tao Ren
2020-09-09 2:59 ` Tao Ren
2020-09-09 7:59 ` kernel test robot
2020-09-09 7:59 ` kernel test robot
2020-09-09 7:59 ` kernel test robot
2020-09-09 8:01 ` kernel test robot
2020-09-09 8:01 ` kernel test robot
2020-09-09 8:01 ` kernel test robot
2020-09-08 20:01 ` [PATCH v2 4/5] ARM: dts: Aspeed: Tacoma: Add IBM Operation Panel I2C device Eddie James
2020-09-08 20:01 ` Eddie James
2020-09-09 6:56 ` Joel Stanley
2020-09-09 6:56 ` Joel Stanley
2020-09-08 20:01 ` [PATCH v2 5/5] ARM: dts: Aspeed: Rainier: " Eddie James
2020-09-08 20:01 ` Eddie James
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200908200101.64974-1-eajames@linux.ibm.com \
--to=eajames@linux.ibm.com \
--cc=linux-aspeed@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.