From: Shawn Guo <shawnguo@kernel.org>
To: Krzysztof Kozlowski <krzk@kernel.org>,
Tim Harvey <tharvey@gateworks.com>
Cc: Heiko Stuebner <heiko@sntech.de>,
"Angus Ainslie \(Purism\)" <angus@akkea.ca>,
Kever Yang <kever.yang@rock-chips.com>,
Leonard Crestez <leonard.crestez@nxp.com>,
Fabio Estevam <festevam@gmail.com>,
Robin Gong <yibin.gong@nxp.com>,
Anson Huang <Anson.Huang@nxp.com>, Adam Ford <aford173@gmail.com>,
Michal Simek <michal.simek@xilinx.com>,
linux-rockchip@lists.infradead.org,
NXP Linux Team <linux-imx@nxp.com>,
devicetree@vger.kernel.org,
Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Rob Herring <robh+dt@kernel.org>,
Daniel Baluta <daniel.baluta@nxp.com>,
Alifer Moraes <alifer.wsdm@gmail.com>,
linux-arm-kernel@lists.infradead.org,
Rajan Vaja <rajan.vaja@xilinx.com>,
linux-kernel@vger.kernel.org,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Vitor Massaru Iha <vitor@massaru.org>
Subject: Re: [PATCH 1/8] ARM: dts: imx6qdl: Correct interrupt flags in examples
Date: Sun, 13 Sep 2020 10:31:53 +0800 [thread overview]
Message-ID: <20200913023152.GH25109@dragon> (raw)
In-Reply-To: <20200908150241.5771-1-krzk@kernel.org>
Add Tim who is the board owner.
On Tue, Sep 08, 2020 at 05:02:34PM +0200, Krzysztof Kozlowski wrote:
> GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
> These are simple defines so they could be used in DTS but they will not
> have the same meaning:
> 1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
> 2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING
>
> Correct the interrupt flags, assuming the author of the code wanted some
> logical behavior behind the name "ACTIVE_xxx", this is:
> ACTIVE_LOW => IRQ_TYPE_LEVEL_LOW
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The subject prefix could be a bit more specific, like 'ARM: dts:
imx6qdl-gw5xxx'. Also, I do not quite understand meaning of 'in
examples' in subject.
Shawn
>
> ---
>
> Not tested on HW.
> ---
> arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 3 ++-
> arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 3 ++-
> arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 3 ++-
> arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 3 ++-
> arch/arm/boot/dts/imx6qdl-gw551x.dtsi | 3 ++-
> arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 3 ++-
> arch/arm/boot/dts/imx6qdl-gw553x.dtsi | 3 ++-
> arch/arm/boot/dts/imx6qdl-gw560x.dtsi | 3 ++-
> arch/arm/boot/dts/imx6qdl-gw5903.dtsi | 3 ++-
> arch/arm/boot/dts/imx6qdl-gw5904.dtsi | 3 ++-
> arch/arm/boot/dts/imx6qdl-gw5907.dtsi | 3 ++-
> arch/arm/boot/dts/imx6qdl-gw5910.dtsi | 3 ++-
> arch/arm/boot/dts/imx6qdl-gw5912.dtsi | 3 ++-
> arch/arm/boot/dts/imx6qdl-gw5913.dtsi | 3 ++-
> 14 files changed, 28 insertions(+), 14 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
> index 4d01c3300b97..3c04b5a4f3cb 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
> @@ -5,6 +5,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -152,7 +153,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
> index f6182a9d201c..736074f1c3ef 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
> @@ -5,6 +5,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -217,7 +218,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
> index a28e79463d0c..8072ed47c6bb 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
> @@ -5,6 +5,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -210,7 +211,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
> index 55f368e192c0..8c9bcdd39830 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
> @@ -5,6 +5,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/sound/fsl-imx-audmux.h>
>
> / {
> @@ -247,7 +248,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #address-cells = <1>;
> diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
> index 1516e2b0bcde..e5d803d023c8 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
> @@ -48,6 +48,7 @@
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/media/tda1997x.h>
> #include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/sound/fsl-imx-audmux.h>
>
> / {
> @@ -219,7 +220,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
> index 0da6e6f7482b..290a607fede9 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
> @@ -5,6 +5,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -144,7 +145,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
> index faf9a3ba61b2..c15b9cc63bf8 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
> @@ -47,6 +47,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -180,7 +181,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
> index f68f9dada5b0..093a219a77ae 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
> @@ -47,6 +47,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/input.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -294,7 +295,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
> index fbe6c32bd756..e1c8dd233cab 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
> @@ -47,6 +47,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> / {
> chosen {
> @@ -235,7 +236,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
> index 23c6e4047621..3cd2e717c1da 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
> @@ -47,6 +47,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -257,7 +258,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
> index b1ff7c859c4d..21c68a55bcb9 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
> @@ -5,6 +5,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -154,7 +155,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
> index 6c943a517ad7..ed4e22259959 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
> @@ -5,6 +5,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -163,7 +164,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
> index 441d8ce97aa4..797f160249f7 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
> @@ -5,6 +5,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -158,7 +159,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #address-cells = <1>;
> diff --git a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
> index d62a8da49367..4cd7d290f5b2 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
> @@ -5,6 +5,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -139,7 +140,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #size-cells = <0>;
> --
> 2.17.1
>
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawnguo@kernel.org>
To: Krzysztof Kozlowski <krzk@kernel.org>,
Tim Harvey <tharvey@gateworks.com>
Cc: Heiko Stuebner <heiko@sntech.de>,
"Angus Ainslie \(Purism\)" <angus@akkea.ca>,
Kever Yang <kever.yang@rock-chips.com>,
Leonard Crestez <leonard.crestez@nxp.com>,
Fabio Estevam <festevam@gmail.com>,
Robin Gong <yibin.gong@nxp.com>,
Anson Huang <Anson.Huang@nxp.com>, Adam Ford <aford173@gmail.com>,
Michal Simek <michal.simek@xilinx.com>,
linux-rockchip@lists.infradead.org,
NXP Linux Team <linux-imx@nxp.com>,
devicetree@vger.kernel.org,
Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Rob Herring <robh+dt@kernel.org>,
Daniel Baluta <daniel.baluta@nxp.com>,
Alifer Moraes <alifer.wsdm@gmail.com>,
linux-arm-kernel@lists.infradead.org,
Rajan Vaja <rajan.vaja@xilinx.com>,
linux-kernel@vger.kernel.org,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Vitor Massaru Iha <vitor@massaru.org>
Subject: Re: [PATCH 1/8] ARM: dts: imx6qdl: Correct interrupt flags in examples
Date: Sun, 13 Sep 2020 10:31:53 +0800 [thread overview]
Message-ID: <20200913023152.GH25109@dragon> (raw)
In-Reply-To: <20200908150241.5771-1-krzk@kernel.org>
Add Tim who is the board owner.
On Tue, Sep 08, 2020 at 05:02:34PM +0200, Krzysztof Kozlowski wrote:
> GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
> These are simple defines so they could be used in DTS but they will not
> have the same meaning:
> 1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
> 2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING
>
> Correct the interrupt flags, assuming the author of the code wanted some
> logical behavior behind the name "ACTIVE_xxx", this is:
> ACTIVE_LOW => IRQ_TYPE_LEVEL_LOW
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The subject prefix could be a bit more specific, like 'ARM: dts:
imx6qdl-gw5xxx'. Also, I do not quite understand meaning of 'in
examples' in subject.
Shawn
>
> ---
>
> Not tested on HW.
> ---
> arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 3 ++-
> arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 3 ++-
> arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 3 ++-
> arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 3 ++-
> arch/arm/boot/dts/imx6qdl-gw551x.dtsi | 3 ++-
> arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 3 ++-
> arch/arm/boot/dts/imx6qdl-gw553x.dtsi | 3 ++-
> arch/arm/boot/dts/imx6qdl-gw560x.dtsi | 3 ++-
> arch/arm/boot/dts/imx6qdl-gw5903.dtsi | 3 ++-
> arch/arm/boot/dts/imx6qdl-gw5904.dtsi | 3 ++-
> arch/arm/boot/dts/imx6qdl-gw5907.dtsi | 3 ++-
> arch/arm/boot/dts/imx6qdl-gw5910.dtsi | 3 ++-
> arch/arm/boot/dts/imx6qdl-gw5912.dtsi | 3 ++-
> arch/arm/boot/dts/imx6qdl-gw5913.dtsi | 3 ++-
> 14 files changed, 28 insertions(+), 14 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
> index 4d01c3300b97..3c04b5a4f3cb 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
> @@ -5,6 +5,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -152,7 +153,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
> index f6182a9d201c..736074f1c3ef 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
> @@ -5,6 +5,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -217,7 +218,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
> index a28e79463d0c..8072ed47c6bb 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
> @@ -5,6 +5,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -210,7 +211,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
> index 55f368e192c0..8c9bcdd39830 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
> @@ -5,6 +5,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/sound/fsl-imx-audmux.h>
>
> / {
> @@ -247,7 +248,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #address-cells = <1>;
> diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
> index 1516e2b0bcde..e5d803d023c8 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
> @@ -48,6 +48,7 @@
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/media/tda1997x.h>
> #include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/sound/fsl-imx-audmux.h>
>
> / {
> @@ -219,7 +220,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
> index 0da6e6f7482b..290a607fede9 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
> @@ -5,6 +5,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -144,7 +145,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
> index faf9a3ba61b2..c15b9cc63bf8 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
> @@ -47,6 +47,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -180,7 +181,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
> index f68f9dada5b0..093a219a77ae 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
> @@ -47,6 +47,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/input.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -294,7 +295,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
> index fbe6c32bd756..e1c8dd233cab 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
> @@ -47,6 +47,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> / {
> chosen {
> @@ -235,7 +236,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
> index 23c6e4047621..3cd2e717c1da 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
> @@ -47,6 +47,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -257,7 +258,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
> index b1ff7c859c4d..21c68a55bcb9 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
> @@ -5,6 +5,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -154,7 +155,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
> index 6c943a517ad7..ed4e22259959 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
> @@ -5,6 +5,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -163,7 +164,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
> index 441d8ce97aa4..797f160249f7 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
> @@ -5,6 +5,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -158,7 +159,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #address-cells = <1>;
> diff --git a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
> index d62a8da49367..4cd7d290f5b2 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
> @@ -5,6 +5,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -139,7 +140,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #size-cells = <0>;
> --
> 2.17.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawnguo@kernel.org>
To: Krzysztof Kozlowski <krzk@kernel.org>,
Tim Harvey <tharvey@gateworks.com>
Cc: Rob Herring <robh+dt@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
Heiko Stuebner <heiko@sntech.de>,
Michal Simek <michal.simek@xilinx.com>,
Adam Ford <aford173@gmail.com>,
Daniel Baluta <daniel.baluta@nxp.com>,
Anson Huang <Anson.Huang@nxp.com>,
Robin Gong <yibin.gong@nxp.com>,
Alifer Moraes <alifer.wsdm@gmail.com>,
Leonard Crestez <leonard.crestez@nxp.com>,
"Angus Ainslie (Purism)" <angus@akkea.ca>,
Vitor Massaru Iha <vitor@massaru.org>,
Kever Yang <kever.yang@rock-chips.com>,
Rajan Vaja <rajan.vaja@xilinx.com>,
Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-rockchip@lists.infradead.org
Subject: Re: [PATCH 1/8] ARM: dts: imx6qdl: Correct interrupt flags in examples
Date: Sun, 13 Sep 2020 10:31:53 +0800 [thread overview]
Message-ID: <20200913023152.GH25109@dragon> (raw)
In-Reply-To: <20200908150241.5771-1-krzk@kernel.org>
Add Tim who is the board owner.
On Tue, Sep 08, 2020 at 05:02:34PM +0200, Krzysztof Kozlowski wrote:
> GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
> These are simple defines so they could be used in DTS but they will not
> have the same meaning:
> 1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
> 2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING
>
> Correct the interrupt flags, assuming the author of the code wanted some
> logical behavior behind the name "ACTIVE_xxx", this is:
> ACTIVE_LOW => IRQ_TYPE_LEVEL_LOW
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The subject prefix could be a bit more specific, like 'ARM: dts:
imx6qdl-gw5xxx'. Also, I do not quite understand meaning of 'in
examples' in subject.
Shawn
>
> ---
>
> Not tested on HW.
> ---
> arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 3 ++-
> arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 3 ++-
> arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 3 ++-
> arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 3 ++-
> arch/arm/boot/dts/imx6qdl-gw551x.dtsi | 3 ++-
> arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 3 ++-
> arch/arm/boot/dts/imx6qdl-gw553x.dtsi | 3 ++-
> arch/arm/boot/dts/imx6qdl-gw560x.dtsi | 3 ++-
> arch/arm/boot/dts/imx6qdl-gw5903.dtsi | 3 ++-
> arch/arm/boot/dts/imx6qdl-gw5904.dtsi | 3 ++-
> arch/arm/boot/dts/imx6qdl-gw5907.dtsi | 3 ++-
> arch/arm/boot/dts/imx6qdl-gw5910.dtsi | 3 ++-
> arch/arm/boot/dts/imx6qdl-gw5912.dtsi | 3 ++-
> arch/arm/boot/dts/imx6qdl-gw5913.dtsi | 3 ++-
> 14 files changed, 28 insertions(+), 14 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
> index 4d01c3300b97..3c04b5a4f3cb 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
> @@ -5,6 +5,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -152,7 +153,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
> index f6182a9d201c..736074f1c3ef 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
> @@ -5,6 +5,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -217,7 +218,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
> index a28e79463d0c..8072ed47c6bb 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
> @@ -5,6 +5,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -210,7 +211,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
> index 55f368e192c0..8c9bcdd39830 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
> @@ -5,6 +5,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/sound/fsl-imx-audmux.h>
>
> / {
> @@ -247,7 +248,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #address-cells = <1>;
> diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
> index 1516e2b0bcde..e5d803d023c8 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
> @@ -48,6 +48,7 @@
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/media/tda1997x.h>
> #include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/sound/fsl-imx-audmux.h>
>
> / {
> @@ -219,7 +220,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
> index 0da6e6f7482b..290a607fede9 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
> @@ -5,6 +5,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -144,7 +145,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
> index faf9a3ba61b2..c15b9cc63bf8 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
> @@ -47,6 +47,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -180,7 +181,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
> index f68f9dada5b0..093a219a77ae 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
> @@ -47,6 +47,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/input.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -294,7 +295,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
> index fbe6c32bd756..e1c8dd233cab 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
> @@ -47,6 +47,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> / {
> chosen {
> @@ -235,7 +236,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
> index 23c6e4047621..3cd2e717c1da 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
> @@ -47,6 +47,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -257,7 +258,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
> index b1ff7c859c4d..21c68a55bcb9 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
> @@ -5,6 +5,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -154,7 +155,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
> index 6c943a517ad7..ed4e22259959 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
> @@ -5,6 +5,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -163,7 +164,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
> index 441d8ce97aa4..797f160249f7 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
> @@ -5,6 +5,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -158,7 +159,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #address-cells = <1>;
> diff --git a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
> index d62a8da49367..4cd7d290f5b2 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
> @@ -5,6 +5,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -139,7 +140,7 @@
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #size-cells = <0>;
> --
> 2.17.1
>
next prev parent reply other threads:[~2020-09-13 2:32 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-08 15:02 [PATCH 1/8] ARM: dts: imx6qdl: Correct interrupt flags in examples Krzysztof Kozlowski
2020-09-08 15:02 ` Krzysztof Kozlowski
2020-09-08 15:02 ` Krzysztof Kozlowski
2020-09-08 15:02 ` [PATCH 2/8] ARM: dts: rk3188: " Krzysztof Kozlowski
2020-09-08 15:02 ` Krzysztof Kozlowski
2020-09-08 15:02 ` Krzysztof Kozlowski
2020-09-08 15:02 ` [PATCH 3/8] arm64: dts: imx8mm: " Krzysztof Kozlowski
2020-09-08 15:02 ` Krzysztof Kozlowski
2020-09-08 15:02 ` Krzysztof Kozlowski
2020-09-09 8:34 ` Krzysztof Kozlowski
2020-09-09 8:34 ` Krzysztof Kozlowski
2020-09-09 8:34 ` Krzysztof Kozlowski
2020-09-08 15:02 ` [PATCH 4/8] arm64: dts: imx8mn: " Krzysztof Kozlowski
2020-09-08 15:02 ` Krzysztof Kozlowski
2020-09-08 15:02 ` Krzysztof Kozlowski
2020-09-08 15:02 ` [PATCH 5/8] arm64: dts: imx8mq: " Krzysztof Kozlowski
2020-09-08 15:02 ` Krzysztof Kozlowski
2020-09-08 15:02 ` Krzysztof Kozlowski
2020-09-08 15:02 ` [PATCH 6/8] arm64: dts: rk3399: " Krzysztof Kozlowski
2020-09-08 15:02 ` Krzysztof Kozlowski
2020-09-08 15:02 ` Krzysztof Kozlowski
2020-09-08 15:02 ` [PATCH 7/8] arm64: dts: zynqmp-zcu100-revC: " Krzysztof Kozlowski
2020-09-08 15:02 ` Krzysztof Kozlowski
2020-09-08 15:02 ` Krzysztof Kozlowski
2020-09-08 15:02 ` [PATCH 8/8] arm64: dts: imx8mm-var-som-symphony: Drop unused gpioledgrp Krzysztof Kozlowski
2020-09-08 15:02 ` Krzysztof Kozlowski
2020-09-08 15:02 ` Krzysztof Kozlowski
2020-09-13 2:34 ` Shawn Guo
2020-09-13 2:34 ` Shawn Guo
2020-09-13 2:34 ` Shawn Guo
2020-09-13 2:31 ` Shawn Guo [this message]
2020-09-13 2:31 ` [PATCH 1/8] ARM: dts: imx6qdl: Correct interrupt flags in examples Shawn Guo
2020-09-13 2:31 ` Shawn Guo
2020-09-17 6:40 ` Krzysztof Kozlowski
2020-09-17 6:40 ` Krzysztof Kozlowski
2020-09-17 6:40 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200913023152.GH25109@dragon \
--to=shawnguo@kernel.org \
--cc=Anson.Huang@nxp.com \
--cc=aford173@gmail.com \
--cc=alifer.wsdm@gmail.com \
--cc=angus@akkea.ca \
--cc=anurag.kumar.vulisha@xilinx.com \
--cc=daniel.baluta@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=heiko@sntech.de \
--cc=kernel@pengutronix.de \
--cc=kever.yang@rock-chips.com \
--cc=krzk@kernel.org \
--cc=leonard.crestez@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=michal.simek@xilinx.com \
--cc=rajan.vaja@xilinx.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=tharvey@gateworks.com \
--cc=vitor@massaru.org \
--cc=yibin.gong@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.