From: Waiman Long <longman-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: Johannes Weiner <hannes-druUgvl0LCNAfugRpC6u6w@public.gmane.org>,
Michal Hocko <mhocko-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Vladimir Davydov
<vdavydov.dev-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Andrew Morton
<akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>,
Tejun Heo <tj-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
cgroups-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-mm-Bw31MaZKKs3YtjvyW6yDsg@public.gmane.org,
Shakeel Butt <shakeelb-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>,
Chris Down <chris-6Bi1550iOqEnzZ6mRAm98g@public.gmane.org>,
Roman Gushchin <guro-b10kYP2dOMg@public.gmane.org>,
Yafang Shao <laoar.shao-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Waiman Long <longman-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH v3 2/3] mm/memcg: Simplify mem_cgroup_get_max()
Date: Mon, 14 Sep 2020 10:19:55 -0400 [thread overview]
Message-ID: <20200914141955.2145-1-longman@redhat.com> (raw)
In-Reply-To: <20200914024452.19167-1-longman-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
The mem_cgroup_get_max() function used to get memory+swap max from
both the v1 memsw and v2 memory+swap page counters & return the maximum
of these 2 values. This is redundant and it is more efficient to just
get either the v1 or the v2 values depending on which one is currently
in use.
Signed-off-by: Waiman Long <longman-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
mm/memcontrol.c | 24 +++++++++++++-----------
1 file changed, 13 insertions(+), 11 deletions(-)
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 8c74f1200261..2331d4bc7c4d 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -1633,17 +1633,19 @@ void mem_cgroup_print_oom_meminfo(struct mem_cgroup *memcg)
*/
unsigned long mem_cgroup_get_max(struct mem_cgroup *memcg)
{
- unsigned long max;
-
- max = READ_ONCE(memcg->memory.max);
- if (mem_cgroup_swappiness(memcg)) {
- unsigned long memsw_max;
- unsigned long swap_max;
-
- memsw_max = memcg->memsw.max;
- swap_max = READ_ONCE(memcg->swap.max);
- swap_max = min(swap_max, (unsigned long)total_swap_pages);
- max = min(max + swap_max, memsw_max);
+ unsigned long max = READ_ONCE(memcg->memory.max);
+
+ if (cgroup_subsys_on_dfl(memory_cgrp_subsys)) {
+ if (mem_cgroup_swappiness(memcg))
+ max += min(READ_ONCE(memcg->swap.max),
+ (unsigned long)total_swap_pages);
+ } else { /* v1 */
+ if (mem_cgroup_swappiness(memcg)) {
+ unsigned long memsw = READ_ONCE(memcg->memsw.max);
+
+ if (memsw > max)
+ max += min(memsw - max, (unsigned long)total_swap_pages);
+ }
}
return max;
}
--
2.18.1
WARNING: multiple messages have this Message-ID (diff)
From: Waiman Long <longman@redhat.com>
To: Johannes Weiner <hannes@cmpxchg.org>,
Michal Hocko <mhocko@kernel.org>,
Vladimir Davydov <vdavydov.dev@gmail.com>,
Andrew Morton <akpm@linux-foundation.org>,
Tejun Heo <tj@kernel.org>
Cc: linux-kernel@vger.kernel.org, cgroups@vger.kernel.org,
linux-mm@kvack.org, Shakeel Butt <shakeelb@google.com>,
Chris Down <chris@chrisdown.name>, Roman Gushchin <guro@fb.com>,
Yafang Shao <laoar.shao@gmail.com>,
Waiman Long <longman@redhat.com>
Subject: [PATCH v3 2/3] mm/memcg: Simplify mem_cgroup_get_max()
Date: Mon, 14 Sep 2020 10:19:55 -0400 [thread overview]
Message-ID: <20200914141955.2145-1-longman@redhat.com> (raw)
In-Reply-To: <20200914024452.19167-1-longman@redhat.com>
The mem_cgroup_get_max() function used to get memory+swap max from
both the v1 memsw and v2 memory+swap page counters & return the maximum
of these 2 values. This is redundant and it is more efficient to just
get either the v1 or the v2 values depending on which one is currently
in use.
Signed-off-by: Waiman Long <longman@redhat.com>
---
mm/memcontrol.c | 24 +++++++++++++-----------
1 file changed, 13 insertions(+), 11 deletions(-)
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 8c74f1200261..2331d4bc7c4d 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -1633,17 +1633,19 @@ void mem_cgroup_print_oom_meminfo(struct mem_cgroup *memcg)
*/
unsigned long mem_cgroup_get_max(struct mem_cgroup *memcg)
{
- unsigned long max;
-
- max = READ_ONCE(memcg->memory.max);
- if (mem_cgroup_swappiness(memcg)) {
- unsigned long memsw_max;
- unsigned long swap_max;
-
- memsw_max = memcg->memsw.max;
- swap_max = READ_ONCE(memcg->swap.max);
- swap_max = min(swap_max, (unsigned long)total_swap_pages);
- max = min(max + swap_max, memsw_max);
+ unsigned long max = READ_ONCE(memcg->memory.max);
+
+ if (cgroup_subsys_on_dfl(memory_cgrp_subsys)) {
+ if (mem_cgroup_swappiness(memcg))
+ max += min(READ_ONCE(memcg->swap.max),
+ (unsigned long)total_swap_pages);
+ } else { /* v1 */
+ if (mem_cgroup_swappiness(memcg)) {
+ unsigned long memsw = READ_ONCE(memcg->memsw.max);
+
+ if (memsw > max)
+ max += min(memsw - max, (unsigned long)total_swap_pages);
+ }
}
return max;
}
--
2.18.1
next prev parent reply other threads:[~2020-09-14 14:19 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-14 2:44 [PATCH v2 0/3] mm/memcg: Miscellaneous cleanups and streamlining Waiman Long
2020-09-14 2:44 ` Waiman Long
2020-09-14 2:44 ` [PATCH v2 1/3] mm/memcg: Clean up obsolete enum charge_type Waiman Long
[not found] ` <20200914024452.19167-2-longman-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2020-09-14 11:37 ` Michal Hocko
2020-09-14 11:37 ` Michal Hocko
[not found] ` <20200914024452.19167-1-longman-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2020-09-14 2:44 ` [PATCH v2 2/3] mm/memcg: Simplify mem_cgroup_get_max() Waiman Long
2020-09-14 2:44 ` Waiman Long
[not found] ` <20200914024452.19167-3-longman-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2020-09-14 11:48 ` Michal Hocko
2020-09-14 11:48 ` Michal Hocko
[not found] ` <20200914114825.GM16999-2MMpYkNvuYDjFM9bn6wA6Q@public.gmane.org>
2020-09-14 13:51 ` Waiman Long
2020-09-14 13:51 ` Waiman Long
[not found] ` <e8ddc443-b56a-1dd6-6d41-ad217e9aea80-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2020-09-14 21:29 ` Johannes Weiner
2020-09-14 21:29 ` Johannes Weiner
2020-09-14 21:32 ` Johannes Weiner
2020-09-14 2:44 ` [PATCH v2 3/3] mm/memcg: Unify swap and memsw page counters Waiman Long
2020-09-14 2:44 ` Waiman Long
2020-09-14 11:54 ` Michal Hocko
[not found] ` <20200914024452.19167-4-longman-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2020-09-14 15:37 ` Shakeel Butt
2020-09-14 15:37 ` Shakeel Butt
2020-09-14 14:19 ` Waiman Long [this message]
2020-09-14 14:19 ` [PATCH v3 2/3] mm/memcg: Simplify mem_cgroup_get_max() Waiman Long
2020-09-14 14:47 ` Michal Hocko
2020-09-14 14:58 ` Waiman Long
2020-09-14 15:09 ` [PATCH v4 " Waiman Long
2020-09-14 15:09 ` Waiman Long
[not found] ` <20200914150928.7841-1-longman-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2020-09-14 15:18 ` Michal Hocko
2020-09-14 15:18 ` Michal Hocko
2020-09-14 15:36 ` Shakeel Butt
2020-09-14 15:36 ` Shakeel Butt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200914141955.2145-1-longman@redhat.com \
--to=longman-h+wxahxf7alqt0dzr+alfa@public.gmane.org \
--cc=akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org \
--cc=cgroups-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=chris-6Bi1550iOqEnzZ6mRAm98g@public.gmane.org \
--cc=guro-b10kYP2dOMg@public.gmane.org \
--cc=hannes-druUgvl0LCNAfugRpC6u6w@public.gmane.org \
--cc=laoar.shao-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-mm-Bw31MaZKKs3YtjvyW6yDsg@public.gmane.org \
--cc=mhocko-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=shakeelb-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
--cc=tj-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=vdavydov.dev-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.