From: Rob Herring <robh@kernel.org>
To: Varadarajan Narayanan <varada@codeaurora.org>
Cc: mturquette@baylibre.com, linux-arm-kernel@lists.infradead.org,
devicetree@vger.kernel.org, linux-clk@vger.kernel.org,
robh+dt@kernel.org, nsekar@codeaurora.org,
linux-gpio@vger.kernel.org, p.zabel@pengutronix.de,
sboyd@kernel.org, linus.walleij@linaro.org,
sricharan@codeaurora.org, linux-kernel@vger.kernel.org,
catalin.marinas@arm.com, agross@kernel.org,
linux-arm-msm@vger.kernel.org, will@kernel.org,
bjorn.andersson@linaro.org
Subject: Re: [PATCH 4/7] dt-bindings: pinctrl: qcom: Add ipq5018 pinctrl bindings
Date: Mon, 28 Sep 2020 13:10:18 -0500 [thread overview]
Message-ID: <20200928181018.GA3007757@bogus> (raw)
In-Reply-To: <1601270140-4306-5-git-send-email-varada@codeaurora.org>
On Mon, 28 Sep 2020 10:45:37 +0530, Varadarajan Narayanan wrote:
> Add device tree binding Documentation details for ipq5018
> pinctrl driver.
>
> Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
> ---
> .../bindings/pinctrl/qcom,ipq5018-pinctrl.yaml | 143 +++++++++++++++++++++
> 1 file changed, 143 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml
>
My bot found errors running 'make dt_binding_check' on your patch:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.example.dt.yaml: pinctrl@1000000: serial3-pinmux:function:0: 'blsp2_uart' is not one of ['atest_char', 'atest_char0', 'atest_char1', 'atest_char2', 'atest_char3', 'audio_pdm0', 'audio_pdm1', 'audio_rxbclk', 'audio_rxd', 'audio_rxfsync', 'audio_rxmclk', 'audio_txbclk', 'audio_txd', 'audio_txfsync', 'audio_txmclk', 'blsp0_i2c', 'blsp0_spi', 'blsp0_uart0', 'blsp0_uart1', 'blsp1_i2c0', 'blsp1_i2c1', 'blsp1_spi0', 'blsp1_spi1', 'blsp1_uart0', 'blsp1_uart1', 'blsp1_uart2', 'blsp2_i2c0', 'blsp2_i2c1', 'blsp2_spi', 'blsp2_spi0', 'blsp2_spi1', 'btss0', 'btss1', 'btss10', 'btss11', 'btss12', 'btss13', 'btss2', 'btss3', 'btss4', 'btss5', 'btss6', 'btss7', 'btss8', 'btss9', 'burn0', 'burn1', 'cri_trng', 'cri_trng0', 'cri_trng1', 'cxc_clk', 'cxc_data', 'dbg_out', 'eud_gpio', 'gcc_plltest', 'gcc_tlmm', 'gpio', 'mac0', 'mac1', 'mdc', 'mdio', 'pcie0_clk', 'pcie0_wake', 'pcie1_clk', 'pcie1_wake', 'pll_te
st', 'prng_rosc', 'pwm0', 'pwm1', 'pwm2', 'pwm3', 'qdss_cti_trig_in_a0', 'qdss_cti_trig_in_a1', 'qdss_cti_trig_in_b0', 'qdss_cti_trig_in_b1', 'qdss_cti_trig_out_a0', 'qdss_cti_trig_out_a1', 'qdss_cti_trig_out_b0', 'qdss_cti_trig_out_b1', 'qdss_traceclk_a', 'qdss_traceclk_b', 'qdss_tracectl_a', 'qdss_tracectl_b', 'qdss_tracedata_a', 'qdss_tracedata_b', 'qspi_clk', 'qspi_cs', 'qspi0', 'qspi1', 'qspi2', 'qspi3', 'reset_out', 'sdc1_clk', 'sdc1_cmd', 'sdc10', 'sdc11', 'sdc12', 'sdc13', 'wci0', 'wci1', 'wci2', 'wci3', 'wci4', 'wci5', 'wci6', 'wci7', 'wsa_swrm', 'wsi_clk3', 'wsi_data3', 'wsis_reset', 'xfem0', 'xfem1', 'xfem2', 'xfem3', 'xfem4', 'xfem5', 'xfem6', 'xfem7']
From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml
See https://patchwork.ozlabs.org/patch/1372367
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:
pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade
Please check and re-submit.
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Varadarajan Narayanan <varada@codeaurora.org>
Cc: devicetree@vger.kernel.org, nsekar@codeaurora.org,
will@kernel.org, linus.walleij@linaro.org, sboyd@kernel.org,
catalin.marinas@arm.com, mturquette@baylibre.com,
linux-kernel@vger.kernel.org, bjorn.andersson@linaro.org,
linux-gpio@vger.kernel.org, robh+dt@kernel.org,
agross@kernel.org, p.zabel@pengutronix.de,
linux-arm-msm@vger.kernel.org, sricharan@codeaurora.org,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 4/7] dt-bindings: pinctrl: qcom: Add ipq5018 pinctrl bindings
Date: Mon, 28 Sep 2020 13:10:18 -0500 [thread overview]
Message-ID: <20200928181018.GA3007757@bogus> (raw)
In-Reply-To: <1601270140-4306-5-git-send-email-varada@codeaurora.org>
On Mon, 28 Sep 2020 10:45:37 +0530, Varadarajan Narayanan wrote:
> Add device tree binding Documentation details for ipq5018
> pinctrl driver.
>
> Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
> ---
> .../bindings/pinctrl/qcom,ipq5018-pinctrl.yaml | 143 +++++++++++++++++++++
> 1 file changed, 143 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml
>
My bot found errors running 'make dt_binding_check' on your patch:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.example.dt.yaml: pinctrl@1000000: serial3-pinmux:function:0: 'blsp2_uart' is not one of ['atest_char', 'atest_char0', 'atest_char1', 'atest_char2', 'atest_char3', 'audio_pdm0', 'audio_pdm1', 'audio_rxbclk', 'audio_rxd', 'audio_rxfsync', 'audio_rxmclk', 'audio_txbclk', 'audio_txd', 'audio_txfsync', 'audio_txmclk', 'blsp0_i2c', 'blsp0_spi', 'blsp0_uart0', 'blsp0_uart1', 'blsp1_i2c0', 'blsp1_i2c1', 'blsp1_spi0', 'blsp1_spi1', 'blsp1_uart0', 'blsp1_uart1', 'blsp1_uart2', 'blsp2_i2c0', 'blsp2_i2c1', 'blsp2_spi', 'blsp2_spi0', 'blsp2_spi1', 'btss0', 'btss1', 'btss10', 'btss11', 'btss12', 'btss13', 'btss2', 'btss3', 'btss4', 'btss5', 'btss6', 'btss7', 'btss8', 'btss9', 'burn0', 'burn1', 'cri_trng', 'cri_trng0', 'cri_trng1', 'cxc_clk', 'cxc_data', 'dbg_out', 'eud_gpio', 'gcc_plltest', 'gcc_tlmm', 'gpio', 'mac0', 'mac1', 'mdc', 'mdio', 'pcie0_clk', 'pcie0_wake', 'pcie1_clk', 'pcie1_wake', 'pll_te
st', 'prng_rosc', 'pwm0', 'pwm1', 'pwm2', 'pwm3', 'qdss_cti_trig_in_a0', 'qdss_cti_trig_in_a1', 'qdss_cti_trig_in_b0', 'qdss_cti_trig_in_b1', 'qdss_cti_trig_out_a0', 'qdss_cti_trig_out_a1', 'qdss_cti_trig_out_b0', 'qdss_cti_trig_out_b1', 'qdss_traceclk_a', 'qdss_traceclk_b', 'qdss_tracectl_a', 'qdss_tracectl_b', 'qdss_tracedata_a', 'qdss_tracedata_b', 'qspi_clk', 'qspi_cs', 'qspi0', 'qspi1', 'qspi2', 'qspi3', 'reset_out', 'sdc1_clk', 'sdc1_cmd', 'sdc10', 'sdc11', 'sdc12', 'sdc13', 'wci0', 'wci1', 'wci2', 'wci3', 'wci4', 'wci5', 'wci6', 'wci7', 'wsa_swrm', 'wsi_clk3', 'wsi_data3', 'wsis_reset', 'xfem0', 'xfem1', 'xfem2', 'xfem3', 'xfem4', 'xfem5', 'xfem6', 'xfem7']
From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml
See https://patchwork.ozlabs.org/patch/1372367
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:
pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade
Please check and re-submit.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-09-28 18:10 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-28 5:15 [PATCH 0/7] Add minimal boot support for IPQ5018 Varadarajan Narayanan
2020-09-28 5:15 ` Varadarajan Narayanan
2020-09-28 5:15 ` [PATCH 1/7] clk: qcom: clk-alpha-pll: Add support for Stromer PLLs Varadarajan Narayanan
2020-09-28 5:15 ` Varadarajan Narayanan
2020-10-14 2:36 ` Stephen Boyd
2020-10-14 2:36 ` Stephen Boyd
2020-12-26 0:51 ` Konrad Dybcio
2020-12-26 0:51 ` Konrad Dybcio
2021-01-05 8:55 ` Varadarajan Narayanan
2020-09-28 5:15 ` [PATCH 2/7] dt-bindings: arm64: ipq5018: Add binding descriptions for clock and reset Varadarajan Narayanan
2020-09-28 5:15 ` Varadarajan Narayanan
2020-09-29 19:24 ` Rob Herring
2020-09-29 19:24 ` Rob Herring
2020-09-28 5:15 ` [PATCH 3/7] clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018 Varadarajan Narayanan
2020-09-28 5:15 ` Varadarajan Narayanan
2020-10-14 2:28 ` Stephen Boyd
2020-10-14 2:28 ` Stephen Boyd
2020-09-28 5:15 ` [PATCH 4/7] dt-bindings: pinctrl: qcom: Add ipq5018 pinctrl bindings Varadarajan Narayanan
2020-09-28 5:15 ` Varadarajan Narayanan
2020-09-28 18:10 ` Rob Herring [this message]
2020-09-28 18:10 ` Rob Herring
2020-09-29 8:15 ` Varadarajan Narayanan
2020-09-29 8:15 ` Varadarajan Narayanan
2020-09-28 5:15 ` [PATCH 5/7] pinctrl: qcom: Add IPQ5018 pinctrl driver Varadarajan Narayanan
2020-09-28 5:15 ` Varadarajan Narayanan
2020-09-28 18:43 ` Bjorn Andersson
2020-09-28 18:43 ` Bjorn Andersson
2020-09-29 8:04 ` Varadarajan Narayanan
2020-09-29 8:04 ` Varadarajan Narayanan
2020-09-28 5:15 ` [PATCH 6/7] arm64: dts: Add ipq5018 SoC and MP03 board support Varadarajan Narayanan
2020-09-28 5:15 ` Varadarajan Narayanan
2020-10-06 18:18 ` Rob Herring
2020-10-06 18:18 ` Rob Herring
2021-01-05 18:55 ` Bjorn Andersson
2021-01-05 18:55 ` Bjorn Andersson
2020-09-28 5:15 ` [PATCH 7/7] arm64: defconfig: Enable IPQ5018 SoC base configs Varadarajan Narayanan
2020-09-28 5:15 ` Varadarajan Narayanan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200928181018.GA3007757@bogus \
--to=robh@kernel.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=nsekar@codeaurora.org \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=sricharan@codeaurora.org \
--cc=varada@codeaurora.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.