From: Tomer Maimon <tmaimon77@gmail.com>
To: robh+dt@kernel.org, mark.rutland@arm.com, avifishman70@gmail.com,
tali.perry1@gmail.com, venture@google.com, yuenn@google.com,
benjaminfair@google.com, joel@jms.id.au
Cc: devicetree@vger.kernel.org, openbmc@lists.ozlabs.org,
linux-kernel@vger.kernel.org, tmaimon77@gmail.com
Subject: [PATCH v8 4/5] arm: dts: add new device nodes to NPCM7XX device tree
Date: Tue, 29 Sep 2020 16:18:06 +0300 [thread overview]
Message-ID: <20200929131807.15378-5-tmaimon77@gmail.com> (raw)
In-Reply-To: <20200929131807.15378-1-tmaimon77@gmail.com>
Add the following new device nodes to NPCM7XX:
- NPCM7xx PWM and FAN.
- NPCM7xx EHCI USB.
- NPCM7xx KCS.
- NPCM Reset.
- NPCM Peripheral SPI.
- NPCM FIU SPI.
- NPCM HWRNG.
- NPCM I2C.
- STMicro STMMAC.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi | 382 +++++++++++++++++-
arch/arm/boot/dts/nuvoton-npcm750.dtsi | 18 +
2 files changed, 394 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
index 7755a3de7c53..3696980a3da1 100644
--- a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
+++ b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
@@ -4,6 +4,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/nuvoton,npcm7xx-clock.h>
+#include <dt-bindings/reset/nuvoton,npcm7xx-reset.h>
/ {
#address-cells = <1>;
@@ -64,12 +65,6 @@
interrupt-parent = <&gic>;
ranges = <0x0 0xf0000000 0x00900000>;
- gcr: gcr@800000 {
- compatible = "nuvoton,npcm750-gcr", "syscon",
- "simple-mfd";
- reg = <0x800000 0x1000>;
- };
-
scu: scu@3fe000 {
compatible = "arm,cortex-a9-scu";
reg = <0x3fe000 0x1000>;
@@ -92,6 +87,16 @@
reg = <0x3ff000 0x1000>,
<0x3fe100 0x100>;
};
+
+ gcr: gcr@800000 {
+ compatible = "nuvoton,npcm750-gcr", "syscon", "simple-mfd";
+ reg = <0x800000 0x1000>;
+ };
+
+ rst: rst@801000 {
+ compatible = "nuvoton,npcm750-rst", "syscon", "simple-mfd";
+ reg = <0x801000 0x6C>;
+ };
};
ahb {
@@ -101,6 +106,12 @@
interrupt-parent = <&gic>;
ranges;
+ rstc: rstc@f0801000 {
+ compatible = "nuvoton,npcm750-reset";
+ reg = <0xf0801000 0x70>;
+ #reset-cells = <2>;
+ };
+
clk: clock-controller@f0801000 {
compatible = "nuvoton,npcm750-clk", "syscon";
#clock-cells = <1>;
@@ -110,6 +121,63 @@
clocks = <&clk_refclk>, <&clk_sysbypck>, <&clk_mcbypck>;
};
+ gmac0: eth@f0802000 {
+ device_type = "network";
+ compatible = "snps,dwmac";
+ reg = <0xf0802000 0x2000>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ ethernet = <0>;
+ clocks = <&clk_rg1refck>, <&clk NPCM7XX_CLK_AHB>;
+ clock-names = "stmmaceth", "clk_gmac";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rg1_pins
+ &rg1mdio_pins>;
+ status = "disabled";
+ };
+
+ ehci1: usb@f0806000 {
+ compatible = "nuvoton,npcm750-ehci";
+ reg = <0xf0806000 0x1000>;
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ fiu0: spi@fb000000 {
+ compatible = "nuvoton,npcm750-fiu";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xfb000000 0x1000>;
+ reg-names = "control", "memory";
+ clocks = <&clk NPCM7XX_CLK_SPI0>;
+ clock-names = "clk_spi0";
+ status = "disabled";
+ };
+
+ fiu3: spi@c0000000 {
+ compatible = "nuvoton,npcm750-fiu";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xc0000000 0x1000>;
+ reg-names = "control", "memory";
+ clocks = <&clk NPCM7XX_CLK_SPI3>;
+ clock-names = "clk_spi3";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi3_pins>;
+ status = "disabled";
+ };
+
+ fiux: spi@fb001000 {
+ compatible = "nuvoton,npcm750-fiu";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xfb001000 0x1000>;
+ reg-names = "control", "memory";
+ clocks = <&clk NPCM7XX_CLK_SPIX>;
+ clock-names = "clk_spix";
+ status = "disabled";
+ };
+
apb {
#address-cells = <1>;
#size-cells = <1>;
@@ -117,6 +185,68 @@
interrupt-parent = <&gic>;
ranges = <0x0 0xf0000000 0x00300000>;
+ lpc_kcs: lpc_kcs@7000 {
+ compatible = "nuvoton,npcm750-lpc-kcs", "simple-mfd", "syscon";
+ reg = <0x7000 0x40>;
+ reg-io-width = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x7000 0x40>;
+
+ kcs1: kcs1@0 {
+ compatible = "nuvoton,npcm750-kcs-bmc";
+ reg = <0x0 0x40>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ kcs_chan = <1>;
+ status = "disabled";
+ };
+
+ kcs2: kcs2@0 {
+ compatible = "nuvoton,npcm750-kcs-bmc";
+ reg = <0x0 0x40>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ kcs_chan = <2>;
+ status = "disabled";
+ };
+
+ kcs3: kcs3@0 {
+ compatible = "nuvoton,npcm750-kcs-bmc";
+ reg = <0x0 0x40>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ kcs_chan = <3>;
+ status = "disabled";
+ };
+ };
+
+ spi0: spi@200000 {
+ compatible = "nuvoton,npcm750-pspi";
+ reg = <0x200000 0x1000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pspi1_pins>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk NPCM7XX_CLK_APB5>;
+ clock-names = "clk_apb5";
+ resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_PSPI1>;
+ status = "disabled";
+ };
+
+ spi1: spi@201000 {
+ compatible = "nuvoton,npcm750-pspi";
+ reg = <0x201000 0x1000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pspi2_pins>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk NPCM7XX_CLK_APB5>;
+ clock-names = "clk_apb5";
+ resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_PSPI2>;
+ status = "disabled";
+ };
+
timer0: timer@8000 {
compatible = "nuvoton,npcm750-timer";
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
@@ -183,6 +313,246 @@
reg-shift = <2>;
status = "disabled";
};
+
+ rng: rng@b000 {
+ compatible = "nuvoton,npcm750-rng";
+ reg = <0xb000 0x8>;
+ status = "disabled";
+ };
+
+ adc: adc@c000 {
+ compatible = "nuvoton,npcm750-adc";
+ reg = <0xc000 0x8>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk NPCM7XX_CLK_ADC>;
+ resets = <&rstc NPCM7XX_RESET_IPSRST1 NPCM7XX_RESET_ADC>;
+ status = "disabled";
+ };
+
+ pwm_fan: pwm-fan-controller@103000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "nuvoton,npcm750-pwm-fan";
+ reg = <0x103000 0x2000>, <0x180000 0x8000>;
+ reg-names = "pwm", "fan";
+ clocks = <&clk NPCM7XX_CLK_APB3>,
+ <&clk NPCM7XX_CLK_APB4>;
+ clock-names = "pwm","fan";
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pins &pwm1_pins
+ &pwm2_pins &pwm3_pins
+ &pwm4_pins &pwm5_pins
+ &pwm6_pins &pwm7_pins
+ &fanin0_pins &fanin1_pins
+ &fanin2_pins &fanin3_pins
+ &fanin4_pins &fanin5_pins
+ &fanin6_pins &fanin7_pins
+ &fanin8_pins &fanin9_pins
+ &fanin10_pins &fanin11_pins
+ &fanin12_pins &fanin13_pins
+ &fanin14_pins &fanin15_pins>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@80000 {
+ reg = <0x80000 0x1000>;
+ compatible = "nuvoton,npcm750-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk NPCM7XX_CLK_APB2>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&smb0_pins>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@81000 {
+ reg = <0x81000 0x1000>;
+ compatible = "nuvoton,npcm750-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk NPCM7XX_CLK_APB2>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&smb1_pins>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@82000 {
+ reg = <0x82000 0x1000>;
+ compatible = "nuvoton,npcm750-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk NPCM7XX_CLK_APB2>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&smb2_pins>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@83000 {
+ reg = <0x83000 0x1000>;
+ compatible = "nuvoton,npcm750-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk NPCM7XX_CLK_APB2>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&smb3_pins>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@84000 {
+ reg = <0x84000 0x1000>;
+ compatible = "nuvoton,npcm750-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk NPCM7XX_CLK_APB2>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&smb4_pins>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@85000 {
+ reg = <0x85000 0x1000>;
+ compatible = "nuvoton,npcm750-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk NPCM7XX_CLK_APB2>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&smb5_pins>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@86000 {
+ reg = <0x86000 0x1000>;
+ compatible = "nuvoton,npcm750-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk NPCM7XX_CLK_APB2>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&smb6_pins>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@87000 {
+ reg = <0x87000 0x1000>;
+ compatible = "nuvoton,npcm750-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk NPCM7XX_CLK_APB2>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&smb7_pins>;
+ status = "disabled";
+ };
+
+ i2c8: i2c@88000 {
+ reg = <0x88000 0x1000>;
+ compatible = "nuvoton,npcm750-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk NPCM7XX_CLK_APB2>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&smb8_pins>;
+ status = "disabled";
+ };
+
+ i2c9: i2c@89000 {
+ reg = <0x89000 0x1000>;
+ compatible = "nuvoton,npcm750-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk NPCM7XX_CLK_APB2>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&smb9_pins>;
+ status = "disabled";
+ };
+
+ i2c10: i2c@8a000 {
+ reg = <0x8a000 0x1000>;
+ compatible = "nuvoton,npcm750-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk NPCM7XX_CLK_APB2>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&smb10_pins>;
+ status = "disabled";
+ };
+
+ i2c11: i2c@8b000 {
+ reg = <0x8b000 0x1000>;
+ compatible = "nuvoton,npcm750-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk NPCM7XX_CLK_APB2>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&smb11_pins>;
+ status = "disabled";
+ };
+
+ i2c12: i2c@8c000 {
+ reg = <0x8c000 0x1000>;
+ compatible = "nuvoton,npcm750-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk NPCM7XX_CLK_APB2>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&smb12_pins>;
+ status = "disabled";
+ };
+
+ i2c13: i2c@8d000 {
+ reg = <0x8d000 0x1000>;
+ compatible = "nuvoton,npcm750-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk NPCM7XX_CLK_APB2>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&smb13_pins>;
+ status = "disabled";
+ };
+
+ i2c14: i2c@8e000 {
+ reg = <0x8e000 0x1000>;
+ compatible = "nuvoton,npcm750-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk NPCM7XX_CLK_APB2>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&smb14_pins>;
+ status = "disabled";
+ };
+
+ i2c15: i2c@8f000 {
+ reg = <0x8f000 0x1000>;
+ compatible = "nuvoton,npcm750-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk NPCM7XX_CLK_APB2>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&smb15_pins>;
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/boot/dts/nuvoton-npcm750.dtsi b/arch/arm/boot/dts/nuvoton-npcm750.dtsi
index a37bb2294b8f..13eee0fe5642 100644
--- a/arch/arm/boot/dts/nuvoton-npcm750.dtsi
+++ b/arch/arm/boot/dts/nuvoton-npcm750.dtsi
@@ -32,6 +32,7 @@
next-level-cache = <&l2>;
};
};
+
soc {
timer@3fe600 {
compatible = "arm,cortex-a9-twd-timer";
@@ -41,4 +42,21 @@
clocks = <&clk NPCM7XX_CLK_AHB>;
};
};
+
+ ahb {
+ gmac1: eth@f0804000 {
+ device_type = "network";
+ compatible = "snps,dwmac";
+ reg = <0xf0804000 0x2000>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ ethernet = <1>;
+ clocks = <&clk_rg2refck>, <&clk NPCM7XX_CLK_AHB>;
+ clock-names = "stmmaceth", "clk_gmac";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rg2_pins
+ &rg2mdio_pins>;
+ status = "disabled";
+ };
+ };
};
--
2.22.0
WARNING: multiple messages have this Message-ID (diff)
From: Tomer Maimon <tmaimon77@gmail.com>
To: robh+dt@kernel.org, mark.rutland@arm.com, avifishman70@gmail.com,
tali.perry1@gmail.com, venture@google.com, yuenn@google.com,
benjaminfair@google.com, joel@jms.id.au
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
openbmc@lists.ozlabs.org, tmaimon77@gmail.com
Subject: [PATCH v8 4/5] arm: dts: add new device nodes to NPCM7XX device tree
Date: Tue, 29 Sep 2020 16:18:06 +0300 [thread overview]
Message-ID: <20200929131807.15378-5-tmaimon77@gmail.com> (raw)
In-Reply-To: <20200929131807.15378-1-tmaimon77@gmail.com>
Add the following new device nodes to NPCM7XX:
- NPCM7xx PWM and FAN.
- NPCM7xx EHCI USB.
- NPCM7xx KCS.
- NPCM Reset.
- NPCM Peripheral SPI.
- NPCM FIU SPI.
- NPCM HWRNG.
- NPCM I2C.
- STMicro STMMAC.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi | 382 +++++++++++++++++-
arch/arm/boot/dts/nuvoton-npcm750.dtsi | 18 +
2 files changed, 394 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
index 7755a3de7c53..3696980a3da1 100644
--- a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
+++ b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
@@ -4,6 +4,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/nuvoton,npcm7xx-clock.h>
+#include <dt-bindings/reset/nuvoton,npcm7xx-reset.h>
/ {
#address-cells = <1>;
@@ -64,12 +65,6 @@
interrupt-parent = <&gic>;
ranges = <0x0 0xf0000000 0x00900000>;
- gcr: gcr@800000 {
- compatible = "nuvoton,npcm750-gcr", "syscon",
- "simple-mfd";
- reg = <0x800000 0x1000>;
- };
-
scu: scu@3fe000 {
compatible = "arm,cortex-a9-scu";
reg = <0x3fe000 0x1000>;
@@ -92,6 +87,16 @@
reg = <0x3ff000 0x1000>,
<0x3fe100 0x100>;
};
+
+ gcr: gcr@800000 {
+ compatible = "nuvoton,npcm750-gcr", "syscon", "simple-mfd";
+ reg = <0x800000 0x1000>;
+ };
+
+ rst: rst@801000 {
+ compatible = "nuvoton,npcm750-rst", "syscon", "simple-mfd";
+ reg = <0x801000 0x6C>;
+ };
};
ahb {
@@ -101,6 +106,12 @@
interrupt-parent = <&gic>;
ranges;
+ rstc: rstc@f0801000 {
+ compatible = "nuvoton,npcm750-reset";
+ reg = <0xf0801000 0x70>;
+ #reset-cells = <2>;
+ };
+
clk: clock-controller@f0801000 {
compatible = "nuvoton,npcm750-clk", "syscon";
#clock-cells = <1>;
@@ -110,6 +121,63 @@
clocks = <&clk_refclk>, <&clk_sysbypck>, <&clk_mcbypck>;
};
+ gmac0: eth@f0802000 {
+ device_type = "network";
+ compatible = "snps,dwmac";
+ reg = <0xf0802000 0x2000>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ ethernet = <0>;
+ clocks = <&clk_rg1refck>, <&clk NPCM7XX_CLK_AHB>;
+ clock-names = "stmmaceth", "clk_gmac";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rg1_pins
+ &rg1mdio_pins>;
+ status = "disabled";
+ };
+
+ ehci1: usb@f0806000 {
+ compatible = "nuvoton,npcm750-ehci";
+ reg = <0xf0806000 0x1000>;
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ fiu0: spi@fb000000 {
+ compatible = "nuvoton,npcm750-fiu";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xfb000000 0x1000>;
+ reg-names = "control", "memory";
+ clocks = <&clk NPCM7XX_CLK_SPI0>;
+ clock-names = "clk_spi0";
+ status = "disabled";
+ };
+
+ fiu3: spi@c0000000 {
+ compatible = "nuvoton,npcm750-fiu";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xc0000000 0x1000>;
+ reg-names = "control", "memory";
+ clocks = <&clk NPCM7XX_CLK_SPI3>;
+ clock-names = "clk_spi3";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi3_pins>;
+ status = "disabled";
+ };
+
+ fiux: spi@fb001000 {
+ compatible = "nuvoton,npcm750-fiu";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xfb001000 0x1000>;
+ reg-names = "control", "memory";
+ clocks = <&clk NPCM7XX_CLK_SPIX>;
+ clock-names = "clk_spix";
+ status = "disabled";
+ };
+
apb {
#address-cells = <1>;
#size-cells = <1>;
@@ -117,6 +185,68 @@
interrupt-parent = <&gic>;
ranges = <0x0 0xf0000000 0x00300000>;
+ lpc_kcs: lpc_kcs@7000 {
+ compatible = "nuvoton,npcm750-lpc-kcs", "simple-mfd", "syscon";
+ reg = <0x7000 0x40>;
+ reg-io-width = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x7000 0x40>;
+
+ kcs1: kcs1@0 {
+ compatible = "nuvoton,npcm750-kcs-bmc";
+ reg = <0x0 0x40>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ kcs_chan = <1>;
+ status = "disabled";
+ };
+
+ kcs2: kcs2@0 {
+ compatible = "nuvoton,npcm750-kcs-bmc";
+ reg = <0x0 0x40>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ kcs_chan = <2>;
+ status = "disabled";
+ };
+
+ kcs3: kcs3@0 {
+ compatible = "nuvoton,npcm750-kcs-bmc";
+ reg = <0x0 0x40>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ kcs_chan = <3>;
+ status = "disabled";
+ };
+ };
+
+ spi0: spi@200000 {
+ compatible = "nuvoton,npcm750-pspi";
+ reg = <0x200000 0x1000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pspi1_pins>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk NPCM7XX_CLK_APB5>;
+ clock-names = "clk_apb5";
+ resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_PSPI1>;
+ status = "disabled";
+ };
+
+ spi1: spi@201000 {
+ compatible = "nuvoton,npcm750-pspi";
+ reg = <0x201000 0x1000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pspi2_pins>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk NPCM7XX_CLK_APB5>;
+ clock-names = "clk_apb5";
+ resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_PSPI2>;
+ status = "disabled";
+ };
+
timer0: timer@8000 {
compatible = "nuvoton,npcm750-timer";
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
@@ -183,6 +313,246 @@
reg-shift = <2>;
status = "disabled";
};
+
+ rng: rng@b000 {
+ compatible = "nuvoton,npcm750-rng";
+ reg = <0xb000 0x8>;
+ status = "disabled";
+ };
+
+ adc: adc@c000 {
+ compatible = "nuvoton,npcm750-adc";
+ reg = <0xc000 0x8>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk NPCM7XX_CLK_ADC>;
+ resets = <&rstc NPCM7XX_RESET_IPSRST1 NPCM7XX_RESET_ADC>;
+ status = "disabled";
+ };
+
+ pwm_fan: pwm-fan-controller@103000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "nuvoton,npcm750-pwm-fan";
+ reg = <0x103000 0x2000>, <0x180000 0x8000>;
+ reg-names = "pwm", "fan";
+ clocks = <&clk NPCM7XX_CLK_APB3>,
+ <&clk NPCM7XX_CLK_APB4>;
+ clock-names = "pwm","fan";
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pins &pwm1_pins
+ &pwm2_pins &pwm3_pins
+ &pwm4_pins &pwm5_pins
+ &pwm6_pins &pwm7_pins
+ &fanin0_pins &fanin1_pins
+ &fanin2_pins &fanin3_pins
+ &fanin4_pins &fanin5_pins
+ &fanin6_pins &fanin7_pins
+ &fanin8_pins &fanin9_pins
+ &fanin10_pins &fanin11_pins
+ &fanin12_pins &fanin13_pins
+ &fanin14_pins &fanin15_pins>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@80000 {
+ reg = <0x80000 0x1000>;
+ compatible = "nuvoton,npcm750-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk NPCM7XX_CLK_APB2>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&smb0_pins>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@81000 {
+ reg = <0x81000 0x1000>;
+ compatible = "nuvoton,npcm750-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk NPCM7XX_CLK_APB2>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&smb1_pins>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@82000 {
+ reg = <0x82000 0x1000>;
+ compatible = "nuvoton,npcm750-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk NPCM7XX_CLK_APB2>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&smb2_pins>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@83000 {
+ reg = <0x83000 0x1000>;
+ compatible = "nuvoton,npcm750-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk NPCM7XX_CLK_APB2>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&smb3_pins>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@84000 {
+ reg = <0x84000 0x1000>;
+ compatible = "nuvoton,npcm750-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk NPCM7XX_CLK_APB2>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&smb4_pins>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@85000 {
+ reg = <0x85000 0x1000>;
+ compatible = "nuvoton,npcm750-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk NPCM7XX_CLK_APB2>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&smb5_pins>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@86000 {
+ reg = <0x86000 0x1000>;
+ compatible = "nuvoton,npcm750-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk NPCM7XX_CLK_APB2>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&smb6_pins>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@87000 {
+ reg = <0x87000 0x1000>;
+ compatible = "nuvoton,npcm750-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk NPCM7XX_CLK_APB2>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&smb7_pins>;
+ status = "disabled";
+ };
+
+ i2c8: i2c@88000 {
+ reg = <0x88000 0x1000>;
+ compatible = "nuvoton,npcm750-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk NPCM7XX_CLK_APB2>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&smb8_pins>;
+ status = "disabled";
+ };
+
+ i2c9: i2c@89000 {
+ reg = <0x89000 0x1000>;
+ compatible = "nuvoton,npcm750-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk NPCM7XX_CLK_APB2>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&smb9_pins>;
+ status = "disabled";
+ };
+
+ i2c10: i2c@8a000 {
+ reg = <0x8a000 0x1000>;
+ compatible = "nuvoton,npcm750-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk NPCM7XX_CLK_APB2>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&smb10_pins>;
+ status = "disabled";
+ };
+
+ i2c11: i2c@8b000 {
+ reg = <0x8b000 0x1000>;
+ compatible = "nuvoton,npcm750-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk NPCM7XX_CLK_APB2>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&smb11_pins>;
+ status = "disabled";
+ };
+
+ i2c12: i2c@8c000 {
+ reg = <0x8c000 0x1000>;
+ compatible = "nuvoton,npcm750-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk NPCM7XX_CLK_APB2>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&smb12_pins>;
+ status = "disabled";
+ };
+
+ i2c13: i2c@8d000 {
+ reg = <0x8d000 0x1000>;
+ compatible = "nuvoton,npcm750-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk NPCM7XX_CLK_APB2>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&smb13_pins>;
+ status = "disabled";
+ };
+
+ i2c14: i2c@8e000 {
+ reg = <0x8e000 0x1000>;
+ compatible = "nuvoton,npcm750-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk NPCM7XX_CLK_APB2>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&smb14_pins>;
+ status = "disabled";
+ };
+
+ i2c15: i2c@8f000 {
+ reg = <0x8f000 0x1000>;
+ compatible = "nuvoton,npcm750-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk NPCM7XX_CLK_APB2>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&smb15_pins>;
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/boot/dts/nuvoton-npcm750.dtsi b/arch/arm/boot/dts/nuvoton-npcm750.dtsi
index a37bb2294b8f..13eee0fe5642 100644
--- a/arch/arm/boot/dts/nuvoton-npcm750.dtsi
+++ b/arch/arm/boot/dts/nuvoton-npcm750.dtsi
@@ -32,6 +32,7 @@
next-level-cache = <&l2>;
};
};
+
soc {
timer@3fe600 {
compatible = "arm,cortex-a9-twd-timer";
@@ -41,4 +42,21 @@
clocks = <&clk NPCM7XX_CLK_AHB>;
};
};
+
+ ahb {
+ gmac1: eth@f0804000 {
+ device_type = "network";
+ compatible = "snps,dwmac";
+ reg = <0xf0804000 0x2000>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ ethernet = <1>;
+ clocks = <&clk_rg2refck>, <&clk NPCM7XX_CLK_AHB>;
+ clock-names = "stmmaceth", "clk_gmac";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rg2_pins
+ &rg2mdio_pins>;
+ status = "disabled";
+ };
+ };
};
--
2.22.0
next prev parent reply other threads:[~2020-09-29 13:29 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-29 13:18 [PATCH v8 0/5] arm: dts: add and modify device node in NPCM7xx device tree Tomer Maimon
2020-09-29 13:18 ` Tomer Maimon
2020-09-29 13:18 ` [PATCH v8 1/5] arm: dts: modify NPCM7xx device tree clock parameter Tomer Maimon
2020-09-29 13:18 ` Tomer Maimon
2020-09-29 13:18 ` [PATCH v8 2/5] arm: dts: modify NPCM7xx device tree timer register size Tomer Maimon
2020-09-29 13:18 ` Tomer Maimon
2020-09-29 13:18 ` [PATCH v8 3/5] arm: dts: add pinctrl and GPIO node to NPCM7XX device tree Tomer Maimon
2020-09-29 13:18 ` Tomer Maimon
2020-09-29 13:18 ` Tomer Maimon [this message]
2020-09-29 13:18 ` [PATCH v8 4/5] arm: dts: add new device nodes " Tomer Maimon
2020-09-29 13:18 ` [PATCH v8 5/5] arm: dts: add new device nodes to NPCM750 device tree EVB Tomer Maimon
2020-09-29 13:18 ` Tomer Maimon
2020-10-07 11:37 ` Joel Stanley
2020-10-07 11:37 ` Joel Stanley
2020-10-07 11:41 ` [PATCH v8 0/5] arm: dts: add and modify device node in NPCM7xx device tree Joel Stanley
2020-10-07 11:41 ` Joel Stanley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200929131807.15378-5-tmaimon77@gmail.com \
--to=tmaimon77@gmail.com \
--cc=avifishman70@gmail.com \
--cc=benjaminfair@google.com \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=openbmc@lists.ozlabs.org \
--cc=robh+dt@kernel.org \
--cc=tali.perry1@gmail.com \
--cc=venture@google.com \
--cc=yuenn@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.