From: Ondrej Zary <linux@zary.sk>
To: Ben Skeggs <bskeggs@redhat.com>
Cc: dri-devel@lists.freedesktop.org, nouveau@lists.freedesktop.org,
linux-kernel@vger.kernel.org
Subject: nouveau broken on Riva TNT2 in 5.9.0-rc8: GPU not supported on big-endian
Date: Fri, 9 Oct 2020 23:26:20 +0200 [thread overview]
Message-ID: <202010092326.20482.linux@zary.sk> (raw)
Hello,
I'm testing 5.9.0-rc8 and found that Riva TNT2 stopped working:
[ 0.000000] Linux version 5.9.0-rc8+ (zary@gsql) (gcc (Debian 8.3.0-6) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #326 SMP Fri Oct 9 22:31:40 CEST 2020
...
[ 14.771464] nouveau 0000:01:00.0: GPU not supported on big-endian
[ 14.771782] nouveau: probe of 0000:01:00.0 failed with error -38
big-endian? WTF? The machine is x86.
It works fine with Debian 5.7 kernel (5.7.10-1~bpo10+1):
[ 0.000000] Linux version 5.7.0-0.bpo.2-686 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6), GNU ld (GNU Binutils for Debian) 2.31.1) #1 SMP Debian 5.7.10-1~bpo10+1 (2020-07-30)
...
[ 23.266196] nouveau 0000:01:00.0: NVIDIA NV05 (20154000)
[ 23.288582] nouveau 0000:01:00.0: bios: version 02.05.20.02.00
[ 23.288869] nouveau 0000:01:00.0: bios: DCB table not found
[ 23.289595] nouveau 0000:01:00.0: bios: DCB table not found
[ 23.289956] nouveau 0000:01:00.0: bios: DCB table not found
[ 23.290015] nouveau 0000:01:00.0: bios: DCB table not found
[ 23.290215] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
[ 23.290287] agpgart-intel 0000:00:00.0: bridge is in legacy mode, falling back to 2.x
[ 23.290351] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[ 23.290430] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
[ 23.290565] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
[ 23.290627] agpgart-intel 0000:00:00.0: bridge is in legacy mode, falling back to 2.x
[ 23.290690] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[ 23.290768] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
[ 23.290830] nouveau 0000:01:00.0: tmr: unknown input clock freq
[ 23.293026] nouveau 0000:01:00.0: fb: 32 MiB SDRAM
[ 23.301269] [TTM] Zone kernel: Available graphics memory: 382728 KiB
[ 23.301327] [TTM] Initializing pool allocator
[ 23.301414] nouveau 0000:01:00.0: DRM: VRAM: 31 MiB
[ 23.301465] nouveau 0000:01:00.0: DRM: GART: 128 MiB
[ 23.301518] nouveau 0000:01:00.0: DRM: BMP version 5.6
[ 23.301570] nouveau 0000:01:00.0: DRM: No DCB data found in VBIOS
[ 23.303594] nouveau 0000:01:00.0: DRM: MM: using M2MF for buffer copies
[ 23.303719] nouveau 0000:01:00.0: bios: DCB table not found
[ 23.304904] nouveau 0000:01:00.0: DRM: Saving VGA fonts
[ 23.349089] nouveau 0000:01:00.0: DRM: No DCB data found in VBIOS
[ 23.349681] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 23.383066] nouveau 0000:01:00.0: DRM: allocated 1280x1024 fb: 0x4000, bo b10d2f17
[ 23.413903] fbcon: nouveaudrmfb (fb0) is primary device
[ 23.569851] Console: switching to colour frame buffer device 160x64
[ 23.571050] nouveau 0000:01:00.0: fb0: nouveaudrmfb frame buffer device
--
Ondrej Zary
WARNING: multiple messages have this Message-ID (diff)
From: Ondrej Zary <linux@zary.sk>
To: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org, linux-kernel@vger.kernel.org,
dri-devel@lists.freedesktop.org
Subject: nouveau broken on Riva TNT2 in 5.9.0-rc8: GPU not supported on big-endian
Date: Fri, 9 Oct 2020 23:26:20 +0200 [thread overview]
Message-ID: <202010092326.20482.linux@zary.sk> (raw)
Hello,
I'm testing 5.9.0-rc8 and found that Riva TNT2 stopped working:
[ 0.000000] Linux version 5.9.0-rc8+ (zary@gsql) (gcc (Debian 8.3.0-6) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #326 SMP Fri Oct 9 22:31:40 CEST 2020
...
[ 14.771464] nouveau 0000:01:00.0: GPU not supported on big-endian
[ 14.771782] nouveau: probe of 0000:01:00.0 failed with error -38
big-endian? WTF? The machine is x86.
It works fine with Debian 5.7 kernel (5.7.10-1~bpo10+1):
[ 0.000000] Linux version 5.7.0-0.bpo.2-686 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6), GNU ld (GNU Binutils for Debian) 2.31.1) #1 SMP Debian 5.7.10-1~bpo10+1 (2020-07-30)
...
[ 23.266196] nouveau 0000:01:00.0: NVIDIA NV05 (20154000)
[ 23.288582] nouveau 0000:01:00.0: bios: version 02.05.20.02.00
[ 23.288869] nouveau 0000:01:00.0: bios: DCB table not found
[ 23.289595] nouveau 0000:01:00.0: bios: DCB table not found
[ 23.289956] nouveau 0000:01:00.0: bios: DCB table not found
[ 23.290015] nouveau 0000:01:00.0: bios: DCB table not found
[ 23.290215] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
[ 23.290287] agpgart-intel 0000:00:00.0: bridge is in legacy mode, falling back to 2.x
[ 23.290351] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[ 23.290430] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
[ 23.290565] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
[ 23.290627] agpgart-intel 0000:00:00.0: bridge is in legacy mode, falling back to 2.x
[ 23.290690] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[ 23.290768] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
[ 23.290830] nouveau 0000:01:00.0: tmr: unknown input clock freq
[ 23.293026] nouveau 0000:01:00.0: fb: 32 MiB SDRAM
[ 23.301269] [TTM] Zone kernel: Available graphics memory: 382728 KiB
[ 23.301327] [TTM] Initializing pool allocator
[ 23.301414] nouveau 0000:01:00.0: DRM: VRAM: 31 MiB
[ 23.301465] nouveau 0000:01:00.0: DRM: GART: 128 MiB
[ 23.301518] nouveau 0000:01:00.0: DRM: BMP version 5.6
[ 23.301570] nouveau 0000:01:00.0: DRM: No DCB data found in VBIOS
[ 23.303594] nouveau 0000:01:00.0: DRM: MM: using M2MF for buffer copies
[ 23.303719] nouveau 0000:01:00.0: bios: DCB table not found
[ 23.304904] nouveau 0000:01:00.0: DRM: Saving VGA fonts
[ 23.349089] nouveau 0000:01:00.0: DRM: No DCB data found in VBIOS
[ 23.349681] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 23.383066] nouveau 0000:01:00.0: DRM: allocated 1280x1024 fb: 0x4000, bo b10d2f17
[ 23.413903] fbcon: nouveaudrmfb (fb0) is primary device
[ 23.569851] Console: switching to colour frame buffer device 160x64
[ 23.571050] nouveau 0000:01:00.0: fb0: nouveaudrmfb frame buffer device
--
Ondrej Zary
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2020-10-09 21:26 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-09 21:26 Ondrej Zary [this message]
2020-10-09 21:26 ` nouveau broken on Riva TNT2 in 5.9.0-rc8: GPU not supported on big-endian Ondrej Zary
2020-10-09 21:53 ` [Nouveau] " Karol Herbst
2020-10-09 21:53 ` Karol Herbst
2020-10-09 22:23 ` Ilia Mirkin
2020-10-09 22:23 ` Ilia Mirkin
[not found] ` <CAKb7UvggVn2c=jUNSfjf6r529n89xfNgVBpn3jnXznVh8Gs4+w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2020-10-10 0:02 ` Karol Herbst
2020-10-10 0:02 ` [Nouveau] " Karol Herbst
2020-10-10 0:02 ` Karol Herbst
[not found] ` <CACO55tuAxbcXbC9zrT5rs34s=5uBugkbcikORU5868ka9bHdkw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2020-10-28 20:15 ` Ondrej Zary
2020-10-28 20:15 ` [Nouveau] " Ondrej Zary
2020-10-28 20:15 ` Ondrej Zary
[not found] ` <202010282115.32811.linux-82g5Cmo2vi4@public.gmane.org>
2020-10-28 21:42 ` Karol Herbst
2020-10-28 21:42 ` [Nouveau] " Karol Herbst
2020-10-28 21:42 ` Karol Herbst
2020-10-10 8:49 ` Ondrej Zary
2020-10-10 8:49 ` [Nouveau] " Ondrej Zary
2020-10-10 8:49 ` Ondrej Zary
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=202010092326.20482.linux@zary.sk \
--to=linux@zary.sk \
--cc=bskeggs@redhat.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nouveau@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.