Re: [PATCH net-next 2/2] dt-bindings: net: dsa: b53: Drop old bindings

[Rob Herring <robh@kernel.org>]

On Sat, Oct 10, 2020 at 06:46:27PM +0200, Kurt Kanzenbach wrote:
> The device tree bindings have been converted to YAML. No need to keep
> the text file around. Update MAINTAINERS file accordingly.

You can squash this into the previous patch.

> 
> Signed-off-by: Kurt Kanzenbach <kurt@kmk-computers.de>
> ---
>  .../devicetree/bindings/net/dsa/b53.txt       | 149 ------------------
>  MAINTAINERS                                   |   2 +-
>  2 files changed, 1 insertion(+), 150 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/net/dsa/b53.txt
> 
> diff --git a/Documentation/devicetree/bindings/net/dsa/b53.txt b/Documentation/devicetree/bindings/net/dsa/b53.txt
> deleted file mode 100644
> index f1487a751b1a..000000000000
> --- a/Documentation/devicetree/bindings/net/dsa/b53.txt
> +++ /dev/null
> @@ -1,149 +0,0 @@
> -Broadcom BCM53xx Ethernet switches
> -==================================
> -
> -Required properties:
> -
> -- compatible: For external switch chips, compatible string must be exactly one
> -  of: "brcm,bcm5325"
> -      "brcm,bcm53115"
> -      "brcm,bcm53125"
> -      "brcm,bcm53128"
> -      "brcm,bcm5365"
> -      "brcm,bcm5395"
> -      "brcm,bcm5389"
> -      "brcm,bcm5397"
> -      "brcm,bcm5398"
> -
> -  For the BCM11360 SoC, must be:
> -      "brcm,bcm11360-srab" and the mandatory "brcm,cygnus-srab" string
> -
> -  For the BCM5310x SoCs with an integrated switch, must be one of:
> -      "brcm,bcm53010-srab"
> -      "brcm,bcm53011-srab"
> -      "brcm,bcm53012-srab"
> -      "brcm,bcm53018-srab"
> -      "brcm,bcm53019-srab" and the mandatory "brcm,bcm5301x-srab" string
> -
> -  For the BCM5831X/BCM1140x SoCs with an integrated switch, must be one of:
> -      "brcm,bcm11404-srab"
> -      "brcm,bcm11407-srab"
> -      "brcm,bcm11409-srab"
> -      "brcm,bcm58310-srab"
> -      "brcm,bcm58311-srab"
> -      "brcm,bcm58313-srab" and the mandatory "brcm,omega-srab" string
> -
> -  For the BCM585xx/586XX/88312 SoCs with an integrated switch, must be one of:
> -      "brcm,bcm58522-srab"
> -      "brcm,bcm58523-srab"
> -      "brcm,bcm58525-srab"
> -      "brcm,bcm58622-srab"
> -      "brcm,bcm58623-srab"
> -      "brcm,bcm58625-srab"
> -      "brcm,bcm88312-srab" and the mandatory "brcm,nsp-srab string
> -
> -  For the BCM63xx/33xx SoCs with an integrated switch, must be one of:
> -      "brcm,bcm3384-switch"
> -      "brcm,bcm6328-switch"
> -      "brcm,bcm6368-switch" and the mandatory "brcm,bcm63xx-switch"
> -
> -Required properties for BCM585xx/586xx/88312 SoCs:
> -
> - - reg: a total of 3 register base addresses, the first one must be the
> -   Switch Register Access block base, the second is the port 5/4 mux
> -   configuration register and the third one is the SGMII configuration
> -   and status register base address.
> -
> - - interrupts: a total of 13 interrupts must be specified, in the following
> -   order: port 0-5, 7-8 link status change, then the integrated PHY interrupt,
> -   then the timestamping interrupt and the sleep timer interrupts for ports
> -   5,7,8.
> -
> -Optional properties for BCM585xx/586xx/88312 SoCs:
> -
> -  - reg-names: a total of 3 names matching the 3 base register address, must
> -    be in the following order:
> -	"srab"
> -	"mux_config"
> -	"sgmii_config"
> -
> -  - interrupt-names: a total of 13 names matching the 13 interrupts specified
> -    must be in the following order:
> -	"link_state_p0"
> -	"link_state_p1"
> -	"link_state_p2"
> -	"link_state_p3"
> -	"link_state_p4"
> -	"link_state_p5"
> -	"link_state_p7"
> -	"link_state_p8"
> -	"phy"
> -	"ts"
> -	"imp_sleep_timer_p5"
> -	"imp_sleep_timer_p7"
> -	"imp_sleep_timer_p8"
> -
> -See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
> -required and optional properties.
> -
> -Examples:
> -
> -Ethernet switch connected via MDIO to the host, CPU port wired to eth0:
> -
> -	eth0: ethernet@10001000 {
> -		compatible = "brcm,unimac";
> -		reg = <0x10001000 0x1000>;
> -
> -		fixed-link {
> -			speed = <1000>;
> -			full-duplex;
> -		};
> -	};
> -
> -	mdio0: mdio@10000000 {
> -		compatible = "brcm,unimac-mdio";
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -
> -		switch0: ethernet-switch@1e {
> -			compatible = "brcm,bcm53125";
> -			reg = <30>;
> -			#address-cells = <1>;
> -			#size-cells = <0>;
> -
> -			ports {
> -				#address-cells = <1>;
> -				#size-cells = <0>;
> -
> -				port0@0 {
> -					reg = <0>;
> -					label = "lan1";
> -				};
> -
> -				port1@1 {
> -					reg = <1>;
> -					label = "lan2";
> -				};
> -
> -				port5@5 {
> -					reg = <5>;
> -					label = "cable-modem";
> -					fixed-link {
> -						speed = <1000>;
> -						full-duplex;
> -					};
> -					phy-mode = "rgmii-txid";
> -				};
> -
> -				port8@8 {
> -					reg = <8>;
> -					label = "cpu";
> -					fixed-link {
> -						speed = <1000>;
> -						full-duplex;
> -					};
> -					phy-mode = "rgmii-txid";
> -					ethernet = <&eth0>;
> -				};
> -			};
> -		};
> -	};
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 14c2b168e077..79dca6ec803d 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -3393,7 +3393,7 @@ M:	Florian Fainelli <f.fainelli@gmail.com>
>  L:	netdev@vger.kernel.org
>  L:	openwrt-devel@lists.openwrt.org (subscribers-only)
>  S:	Supported
> -F:	Documentation/devicetree/bindings/net/dsa/b53.txt
> +F:	Documentation/devicetree/bindings/net/dsa/b53.yaml
>  F:	drivers/net/dsa/b53/*
>  F:	include/linux/platform_data/b53.h
>  
> -- 
> 2.26.2
>