* [PATCH v4 1/5] MAINTAINERS: Update MAINTAINERS for Renesas DRIF driver
2020-10-14 15:57 [PATCH v4 0/5] Add r8a77965 DRIF support Fabrizio Castro
@ 2020-10-14 15:57 ` Fabrizio Castro
2020-10-14 15:57 ` [PATCH v4 2/5] media: dt-bindings: media: renesas,drif: Convert to json-schema Fabrizio Castro
` (3 subsequent siblings)
4 siblings, 0 replies; 11+ messages in thread
From: Fabrizio Castro @ 2020-10-14 15:57 UTC (permalink / raw)
To: Mauro Carvalho Chehab, Rob Herring, Geert Uytterhoeven
Cc: Fabrizio Castro, Ramesh Shanmugasundaram, linux-media, devicetree,
linux-kernel, linux-renesas-soc, Chris Paterson, Biju Das,
Prabhakar Mahadev Lad, Laurent Pinchart
Add Fabrizio castro and remove Ramesh Shanmugasundaram.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ramesh Shanmugasundaram <rashanmu@gmail.com>
---
v3->v4:
* No change
v2->v3:
* Removed Ramesh Shanmugasundaram as maintainer, as suggested
by Ramesh
* Reworked commit title and changelog
v1->v2:
* No change
MAINTAINERS | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 9a54806ebf02..4ff8e65df4e7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10835,7 +10835,7 @@ F: drivers/media/platform/renesas-ceu.c
F: include/media/drv-intf/renesas-ceu.h
MEDIA DRIVERS FOR RENESAS - DRIF
-M: Ramesh Shanmugasundaram <rashanmu@gmail.com>
+M: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
L: linux-media@vger.kernel.org
L: linux-renesas-soc@vger.kernel.org
S: Supported
--
2.25.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH v4 2/5] media: dt-bindings: media: renesas,drif: Convert to json-schema
2020-10-14 15:57 [PATCH v4 0/5] Add r8a77965 DRIF support Fabrizio Castro
2020-10-14 15:57 ` [PATCH v4 1/5] MAINTAINERS: Update MAINTAINERS for Renesas DRIF driver Fabrizio Castro
@ 2020-10-14 15:57 ` Fabrizio Castro
2020-10-16 15:50 ` Rob Herring
2020-10-16 15:55 ` Rob Herring
2020-10-14 15:57 ` [PATCH v4 3/5] media: dt-bindings: media: renesas,drif: Add r8a77990 support Fabrizio Castro
` (2 subsequent siblings)
4 siblings, 2 replies; 11+ messages in thread
From: Fabrizio Castro @ 2020-10-14 15:57 UTC (permalink / raw)
To: Mauro Carvalho Chehab, Rob Herring, Geert Uytterhoeven
Cc: Fabrizio Castro, Ramesh Shanmugasundaram, linux-media, devicetree,
linux-kernel, linux-renesas-soc, Chris Paterson, Biju Das,
Prabhakar Mahadev Lad, Laurent Pinchart
Convert the Renesas DRIF bindings to DT schema and update
MAINTAINERS accordingly.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v3->v4:
* Replace "if" statement with "else" statement for the branch
rejecting pinctrl-0 and pinctrl-names properties, as suggested
by Geert
v2->v3:
* Removed the definition of pinctrl-0 and pinctrl-names, as
suggested by Geert
* Added "power-domains" to the list of required properties,
as suggested by Geert
v1->v2:
* s/controller/Controller/ in the title of renesas,drif.yaml
as suggested by Laurent.
.../bindings/media/renesas,drif.txt | 177 -----------
.../bindings/media/renesas,drif.yaml | 277 ++++++++++++++++++
MAINTAINERS | 2 +-
3 files changed, 278 insertions(+), 178 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/media/renesas,drif.txt
create mode 100644 Documentation/devicetree/bindings/media/renesas,drif.yaml
diff --git a/Documentation/devicetree/bindings/media/renesas,drif.txt b/Documentation/devicetree/bindings/media/renesas,drif.txt
deleted file mode 100644
index 0d8974aa8b38..000000000000
--- a/Documentation/devicetree/bindings/media/renesas,drif.txt
+++ /dev/null
@@ -1,177 +0,0 @@
-Renesas R-Car Gen3 Digital Radio Interface controller (DRIF)
-------------------------------------------------------------
-
-R-Car Gen3 DRIF is a SPI like receive only slave device. A general
-representation of DRIF interfacing with a master device is shown below.
-
-+---------------------+ +---------------------+
-| |-----SCK------->|CLK |
-| Master |-----SS-------->|SYNC DRIFn (slave) |
-| |-----SD0------->|D0 |
-| |-----SD1------->|D1 |
-+---------------------+ +---------------------+
-
-As per datasheet, each DRIF channel (drifn) is made up of two internal
-channels (drifn0 & drifn1). These two internal channels share the common
-CLK & SYNC. Each internal channel has its own dedicated resources like
-irq, dma channels, address space & clock. This internal split is not
-visible to the external master device.
-
-The device tree model represents each internal channel as a separate node.
-The internal channels sharing the CLK & SYNC are tied together by their
-phandles using a property called "renesas,bonding". For the rest of
-the documentation, unless explicitly stated, the word channel implies an
-internal channel.
-
-When both internal channels are enabled they need to be managed together
-as one (i.e.) they cannot operate alone as independent devices. Out of the
-two, one of them needs to act as a primary device that accepts common
-properties of both the internal channels. This channel is identified by a
-property called "renesas,primary-bond".
-
-To summarize,
- - When both the internal channels that are bonded together are enabled,
- the zeroth channel is selected as primary-bond. This channels accepts
- properties common to all the members of the bond.
- - When only one of the bonded channels need to be enabled, the property
- "renesas,bonding" or "renesas,primary-bond" will have no effect. That
- enabled channel can act alone as any other independent device.
-
-Required properties of an internal channel:
--------------------------------------------
-- compatible: "renesas,r8a7795-drif" if DRIF controller is a part of R8A7795 SoC.
- "renesas,r8a7796-drif" if DRIF controller is a part of R8A7796 SoC.
- "renesas,rcar-gen3-drif" for a generic R-Car Gen3 compatible device.
-
- When compatible with the generic version, nodes must list the
- SoC-specific version corresponding to the platform first
- followed by the generic version.
-
-- reg: offset and length of that channel.
-- interrupts: associated with that channel.
-- clocks: phandle and clock specifier of that channel.
-- clock-names: clock input name string: "fck".
-- dmas: phandles to the DMA channels.
-- dma-names: names of the DMA channel: "rx".
-- renesas,bonding: phandle to the other channel.
-
-Optional properties of an internal channel:
--------------------------------------------
-- power-domains: phandle to the respective power domain.
-
-Required properties of an internal channel when:
- - It is the only enabled channel of the bond (or)
- - If it acts as primary among enabled bonds
---------------------------------------------------------
-- pinctrl-0: pin control group to be used for this channel.
-- pinctrl-names: must be "default".
-- renesas,primary-bond: empty property indicating the channel acts as primary
- among the bonded channels.
-- port: child port node corresponding to the data input, in accordance with
- the video interface bindings defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt. The port
- node must contain at least one endpoint.
-
-Optional endpoint property:
----------------------------
-- sync-active: Indicates sync signal polarity, 0/1 for low/high respectively.
- This property maps to SYNCAC bit in the hardware manual. The
- default is 1 (active high).
-
-Example:
---------
-
-(1) Both internal channels enabled:
------------------------------------
-
-When interfacing with a third party tuner device with two data pins as shown
-below.
-
-+---------------------+ +---------------------+
-| |-----SCK------->|CLK |
-| Master |-----SS-------->|SYNC DRIFn (slave) |
-| |-----SD0------->|D0 |
-| |-----SD1------->|D1 |
-+---------------------+ +---------------------+
-
- drif00: rif@e6f40000 {
- compatible = "renesas,r8a7795-drif",
- "renesas,rcar-gen3-drif";
- reg = <0 0xe6f40000 0 0x64>;
- interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 515>;
- clock-names = "fck";
- dmas = <&dmac1 0x20>, <&dmac2 0x20>;
- dma-names = "rx", "rx";
- power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- renesas,bonding = <&drif01>;
- renesas,primary-bond;
- pinctrl-0 = <&drif0_pins>;
- pinctrl-names = "default";
- port {
- drif0_ep: endpoint {
- remote-endpoint = <&tuner_ep>;
- };
- };
- };
-
- drif01: rif@e6f50000 {
- compatible = "renesas,r8a7795-drif",
- "renesas,rcar-gen3-drif";
- reg = <0 0xe6f50000 0 0x64>;
- interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 514>;
- clock-names = "fck";
- dmas = <&dmac1 0x22>, <&dmac2 0x22>;
- dma-names = "rx", "rx";
- power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- renesas,bonding = <&drif00>;
- };
-
-
-(2) Internal channel 1 alone is enabled:
-----------------------------------------
-
-When interfacing with a third party tuner device with one data pin as shown
-below.
-
-+---------------------+ +---------------------+
-| |-----SCK------->|CLK |
-| Master |-----SS-------->|SYNC DRIFn (slave) |
-| | |D0 (unused) |
-| |-----SD-------->|D1 |
-+---------------------+ +---------------------+
-
- drif00: rif@e6f40000 {
- compatible = "renesas,r8a7795-drif",
- "renesas,rcar-gen3-drif";
- reg = <0 0xe6f40000 0 0x64>;
- interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 515>;
- clock-names = "fck";
- dmas = <&dmac1 0x20>, <&dmac2 0x20>;
- dma-names = "rx", "rx";
- power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- renesas,bonding = <&drif01>;
- };
-
- drif01: rif@e6f50000 {
- compatible = "renesas,r8a7795-drif",
- "renesas,rcar-gen3-drif";
- reg = <0 0xe6f50000 0 0x64>;
- interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 514>;
- clock-names = "fck";
- dmas = <&dmac1 0x22>, <&dmac2 0x22>;
- dma-names = "rx", "rx";
- power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- renesas,bonding = <&drif00>;
- pinctrl-0 = <&drif0_pins>;
- pinctrl-names = "default";
- port {
- drif0_ep: endpoint {
- remote-endpoint = <&tuner_ep>;
- sync-active = <0>;
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml
new file mode 100644
index 000000000000..3832ce837553
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml
@@ -0,0 +1,277 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,drif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Gen3 Digital Radio Interface Controller (DRIF)
+
+maintainers:
+ - Ramesh Shanmugasundaram <rashanmu@gmail.com>
+ - Fabrizio Castro <fabrizio.castro.jz@renesas.com>
+
+description: |
+ R-Car Gen3 DRIF is a SPI like receive only slave device. A general
+ representation of DRIF interfacing with a master device is shown below.
+
+ +---------------------+ +---------------------+
+ | |-----SCK------->|CLK |
+ | Master |-----SS-------->|SYNC DRIFn (slave) |
+ | |-----SD0------->|D0 |
+ | |-----SD1------->|D1 |
+ +---------------------+ +---------------------+
+
+ As per datasheet, each DRIF channel (drifn) is made up of two internal
+ channels (drifn0 & drifn1). These two internal channels share the common
+ CLK & SYNC. Each internal channel has its own dedicated resources like
+ irq, dma channels, address space & clock. This internal split is not
+ visible to the external master device.
+
+ The device tree model represents each internal channel as a separate node.
+ The internal channels sharing the CLK & SYNC are tied together by their
+ phandles using a property called "renesas,bonding". For the rest of
+ the documentation, unless explicitly stated, the word channel implies an
+ internal channel.
+
+ When both internal channels are enabled they need to be managed together
+ as one (i.e.) they cannot operate alone as independent devices. Out of the
+ two, one of them needs to act as a primary device that accepts common
+ properties of both the internal channels. This channel is identified by a
+ property called "renesas,primary-bond".
+
+ To summarize,
+ * When both the internal channels that are bonded together are enabled,
+ the zeroth channel is selected as primary-bond. This channels accepts
+ properties common to all the members of the bond.
+ * When only one of the bonded channels need to be enabled, the property
+ "renesas,bonding" or "renesas,primary-bond" will have no effect. That
+ enabled channel can act alone as any other independent device.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - renesas,r8a7795-drif # R-Car H3
+ - renesas,r8a7796-drif # R-Car M3-W
+ - const: renesas,rcar-gen3-drif # Generic R-Car Gen3 compatible device
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ maxItems: 1
+ items:
+ - const: fck
+
+ resets:
+ maxItems: 1
+
+ dmas:
+ minItems: 1
+ maxItems: 2
+
+ dma-names:
+ minItems: 1
+ maxItems: 2
+ items:
+ - const: rx
+ - const: rx
+
+ renesas,bonding:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ The phandle to the other internal channel of DRIF
+
+ power-domains:
+ maxItems: 1
+
+ renesas,primary-bond:
+ type: boolean
+ description:
+ Indicates that the channel acts as primary among the bonded channels.
+
+ port:
+ type: object
+ description:
+ Child port node corresponding to the data input, in accordance with the
+ video interface bindings defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+ The port node must contain at least one endpoint.
+
+ properties:
+ endpoint:
+ type: object
+
+ properties:
+ remote-endpoint:
+ description:
+ A phandle to the remote tuner endpoint subnode in remote node
+ port.
+
+ sync-active:
+ enum: [0, 1]
+ description:
+ Indicates sync signal polarity, 0/1 for low/high respectively.
+ This property maps to SYNCAC bit in the hardware manual. The
+ default is 1 (active high).
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - resets
+ - dmas
+ - dma-names
+ - renesas,bonding
+ - power-domains
+
+allOf:
+ - if:
+ required:
+ - renesas,primary-bond
+ then:
+ required:
+ - pinctrl-0
+ - pinctrl-names
+ - port
+
+ - if:
+ required:
+ - port
+ then:
+ required:
+ - pinctrl-0
+ - pinctrl-names
+ else:
+ properties:
+ pinctrl-0: false
+ pinctrl-names: false
+
+additionalProperties: false
+
+examples:
+ # Example with both internal channels enabled.
+ #
+ # When interfacing with a third party tuner device with two data pins as shown
+ # below.
+ #
+ # +---------------------+ +---------------------+
+ # | |-----SCK------->|CLK |
+ # | Master |-----SS-------->|SYNC DRIFn (slave) |
+ # | |-----SD0------->|D0 |
+ # | |-----SD1------->|D1 |
+ # +---------------------+ +---------------------+
+ - |
+ #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/r8a7795-sysc.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ drif00: rif@e6f40000 {
+ compatible = "renesas,r8a7795-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f40000 0 0x64>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 515>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x20>, <&dmac2 0x20>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ renesas,bonding = <&drif01>;
+ resets = <&cpg 515>;
+ renesas,primary-bond;
+ pinctrl-0 = <&drif0_pins>;
+ pinctrl-names = "default";
+ port {
+ drif0_ep: endpoint {
+ remote-endpoint = <&tuner_ep>;
+ };
+ };
+ };
+
+ drif01: rif@e6f50000 {
+ compatible = "renesas,r8a7795-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f50000 0 0x64>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 514>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x22>, <&dmac2 0x22>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ renesas,bonding = <&drif00>;
+ resets = <&cpg 514>;
+ };
+ };
+
+ # Example with internal channel 1 alone enabled.
+ #
+ # When interfacing with a third party tuner device with one data pin as shown
+ # below.
+ #
+ # +---------------------+ +---------------------+
+ # | |-----SCK------->|CLK |
+ # | Master |-----SS-------->|SYNC DRIFn (slave) |
+ # | | |D0 (unused) |
+ # | |-----SD-------->|D1 |
+ # +---------------------+ +---------------------+
+ - |
+ #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/r8a7795-sysc.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ drif10: rif@e6f60000 {
+ compatible = "renesas,r8a7795-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f60000 0 0x64>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 513>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x24>, <&dmac2 0x24>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 513>;
+ renesas,bonding = <&drif11>;
+ status = "disabled";
+ };
+
+ drif11: rif@e6f70000 {
+ compatible = "renesas,r8a7795-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f70000 0 0x64>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 512>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x26>, <&dmac2 0x26>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 512>;
+ renesas,bonding = <&drif10>;
+ pinctrl-0 = <&drif1_pins>;
+ pinctrl-names = "default";
+ port {
+ drif1_ep: endpoint {
+ remote-endpoint = <&tuner_ep1>;
+ sync-active = <0>;
+ };
+ };
+ };
+ };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 4ff8e65df4e7..797718391b38 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10840,7 +10840,7 @@ L: linux-media@vger.kernel.org
L: linux-renesas-soc@vger.kernel.org
S: Supported
T: git git://linuxtv.org/media_tree.git
-F: Documentation/devicetree/bindings/media/renesas,drif.txt
+F: Documentation/devicetree/bindings/media/renesas,drif.yaml
F: drivers/media/platform/rcar_drif.c
MEDIA DRIVERS FOR RENESAS - FCP
--
2.25.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [PATCH v4 2/5] media: dt-bindings: media: renesas,drif: Convert to json-schema
2020-10-14 15:57 ` [PATCH v4 2/5] media: dt-bindings: media: renesas,drif: Convert to json-schema Fabrizio Castro
@ 2020-10-16 15:50 ` Rob Herring
2020-10-16 15:55 ` Rob Herring
1 sibling, 0 replies; 11+ messages in thread
From: Rob Herring @ 2020-10-16 15:50 UTC (permalink / raw)
To: Fabrizio Castro
Cc: devicetree, linux-kernel, Chris Paterson, Biju Das,
linux-renesas-soc, Mauro Carvalho Chehab, Rob Herring,
Geert Uytterhoeven, linux-media, Prabhakar Mahadev Lad,
Laurent Pinchart, Ramesh Shanmugasundaram
On Wed, 14 Oct 2020 16:57:16 +0100, Fabrizio Castro wrote:
> Convert the Renesas DRIF bindings to DT schema and update
> MAINTAINERS accordingly.
>
> Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> v3->v4:
> * Replace "if" statement with "else" statement for the branch
> rejecting pinctrl-0 and pinctrl-names properties, as suggested
> by Geert
> v2->v3:
> * Removed the definition of pinctrl-0 and pinctrl-names, as
> suggested by Geert
> * Added "power-domains" to the list of required properties,
> as suggested by Geert
> v1->v2:
> * s/controller/Controller/ in the title of renesas,drif.yaml
> as suggested by Laurent.
>
> .../bindings/media/renesas,drif.txt | 177 -----------
> .../bindings/media/renesas,drif.yaml | 277 ++++++++++++++++++
> MAINTAINERS | 2 +-
> 3 files changed, 278 insertions(+), 178 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/media/renesas,drif.txt
> create mode 100644 Documentation/devicetree/bindings/media/renesas,drif.yaml
>
My bot found errors running 'make dt_binding_check' on your patch:
./Documentation/devicetree/bindings/media/renesas,drif.yaml:54:9: [warning] wrong indentation: expected 10 but found 8 (indentation)
See https://patchwork.ozlabs.org/patch/1382223
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:
pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade
Please check and re-submit.
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v4 2/5] media: dt-bindings: media: renesas,drif: Convert to json-schema
2020-10-14 15:57 ` [PATCH v4 2/5] media: dt-bindings: media: renesas,drif: Convert to json-schema Fabrizio Castro
2020-10-16 15:50 ` Rob Herring
@ 2020-10-16 15:55 ` Rob Herring
2020-10-21 13:48 ` Fabrizio Castro
1 sibling, 1 reply; 11+ messages in thread
From: Rob Herring @ 2020-10-16 15:55 UTC (permalink / raw)
To: Fabrizio Castro
Cc: Mauro Carvalho Chehab, Geert Uytterhoeven,
Ramesh Shanmugasundaram, linux-media, devicetree, linux-kernel,
linux-renesas-soc, Chris Paterson, Biju Das,
Prabhakar Mahadev Lad, Laurent Pinchart
On Wed, Oct 14, 2020 at 04:57:16PM +0100, Fabrizio Castro wrote:
> Convert the Renesas DRIF bindings to DT schema and update
> MAINTAINERS accordingly.
>
> Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> v3->v4:
> * Replace "if" statement with "else" statement for the branch
> rejecting pinctrl-0 and pinctrl-names properties, as suggested
> by Geert
> v2->v3:
> * Removed the definition of pinctrl-0 and pinctrl-names, as
> suggested by Geert
> * Added "power-domains" to the list of required properties,
> as suggested by Geert
> v1->v2:
> * s/controller/Controller/ in the title of renesas,drif.yaml
> as suggested by Laurent.
>
> .../bindings/media/renesas,drif.txt | 177 -----------
> .../bindings/media/renesas,drif.yaml | 277 ++++++++++++++++++
> MAINTAINERS | 2 +-
> 3 files changed, 278 insertions(+), 178 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/media/renesas,drif.txt
> create mode 100644 Documentation/devicetree/bindings/media/renesas,drif.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/renesas,drif.txt b/Documentation/devicetree/bindings/media/renesas,drif.txt
> deleted file mode 100644
> index 0d8974aa8b38..000000000000
> --- a/Documentation/devicetree/bindings/media/renesas,drif.txt
> +++ /dev/null
> @@ -1,177 +0,0 @@
> -Renesas R-Car Gen3 Digital Radio Interface controller (DRIF)
> -------------------------------------------------------------
> -
> -R-Car Gen3 DRIF is a SPI like receive only slave device. A general
> -representation of DRIF interfacing with a master device is shown below.
> -
> -+---------------------+ +---------------------+
> -| |-----SCK------->|CLK |
> -| Master |-----SS-------->|SYNC DRIFn (slave) |
> -| |-----SD0------->|D0 |
> -| |-----SD1------->|D1 |
> -+---------------------+ +---------------------+
> -
> -As per datasheet, each DRIF channel (drifn) is made up of two internal
> -channels (drifn0 & drifn1). These two internal channels share the common
> -CLK & SYNC. Each internal channel has its own dedicated resources like
> -irq, dma channels, address space & clock. This internal split is not
> -visible to the external master device.
> -
> -The device tree model represents each internal channel as a separate node.
> -The internal channels sharing the CLK & SYNC are tied together by their
> -phandles using a property called "renesas,bonding". For the rest of
> -the documentation, unless explicitly stated, the word channel implies an
> -internal channel.
> -
> -When both internal channels are enabled they need to be managed together
> -as one (i.e.) they cannot operate alone as independent devices. Out of the
> -two, one of them needs to act as a primary device that accepts common
> -properties of both the internal channels. This channel is identified by a
> -property called "renesas,primary-bond".
> -
> -To summarize,
> - - When both the internal channels that are bonded together are enabled,
> - the zeroth channel is selected as primary-bond. This channels accepts
> - properties common to all the members of the bond.
> - - When only one of the bonded channels need to be enabled, the property
> - "renesas,bonding" or "renesas,primary-bond" will have no effect. That
> - enabled channel can act alone as any other independent device.
> -
> -Required properties of an internal channel:
> --------------------------------------------
> -- compatible: "renesas,r8a7795-drif" if DRIF controller is a part of R8A7795 SoC.
> - "renesas,r8a7796-drif" if DRIF controller is a part of R8A7796 SoC.
> - "renesas,rcar-gen3-drif" for a generic R-Car Gen3 compatible device.
> -
> - When compatible with the generic version, nodes must list the
> - SoC-specific version corresponding to the platform first
> - followed by the generic version.
> -
> -- reg: offset and length of that channel.
> -- interrupts: associated with that channel.
> -- clocks: phandle and clock specifier of that channel.
> -- clock-names: clock input name string: "fck".
> -- dmas: phandles to the DMA channels.
> -- dma-names: names of the DMA channel: "rx".
> -- renesas,bonding: phandle to the other channel.
> -
> -Optional properties of an internal channel:
> --------------------------------------------
> -- power-domains: phandle to the respective power domain.
> -
> -Required properties of an internal channel when:
> - - It is the only enabled channel of the bond (or)
> - - If it acts as primary among enabled bonds
> ---------------------------------------------------------
> -- pinctrl-0: pin control group to be used for this channel.
> -- pinctrl-names: must be "default".
> -- renesas,primary-bond: empty property indicating the channel acts as primary
> - among the bonded channels.
> -- port: child port node corresponding to the data input, in accordance with
> - the video interface bindings defined in
> - Documentation/devicetree/bindings/media/video-interfaces.txt. The port
> - node must contain at least one endpoint.
> -
> -Optional endpoint property:
> ----------------------------
> -- sync-active: Indicates sync signal polarity, 0/1 for low/high respectively.
> - This property maps to SYNCAC bit in the hardware manual. The
> - default is 1 (active high).
> -
> -Example:
> ---------
> -
> -(1) Both internal channels enabled:
> ------------------------------------
> -
> -When interfacing with a third party tuner device with two data pins as shown
> -below.
> -
> -+---------------------+ +---------------------+
> -| |-----SCK------->|CLK |
> -| Master |-----SS-------->|SYNC DRIFn (slave) |
> -| |-----SD0------->|D0 |
> -| |-----SD1------->|D1 |
> -+---------------------+ +---------------------+
> -
> - drif00: rif@e6f40000 {
> - compatible = "renesas,r8a7795-drif",
> - "renesas,rcar-gen3-drif";
> - reg = <0 0xe6f40000 0 0x64>;
> - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cpg CPG_MOD 515>;
> - clock-names = "fck";
> - dmas = <&dmac1 0x20>, <&dmac2 0x20>;
> - dma-names = "rx", "rx";
> - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> - renesas,bonding = <&drif01>;
> - renesas,primary-bond;
> - pinctrl-0 = <&drif0_pins>;
> - pinctrl-names = "default";
> - port {
> - drif0_ep: endpoint {
> - remote-endpoint = <&tuner_ep>;
> - };
> - };
> - };
> -
> - drif01: rif@e6f50000 {
> - compatible = "renesas,r8a7795-drif",
> - "renesas,rcar-gen3-drif";
> - reg = <0 0xe6f50000 0 0x64>;
> - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cpg CPG_MOD 514>;
> - clock-names = "fck";
> - dmas = <&dmac1 0x22>, <&dmac2 0x22>;
> - dma-names = "rx", "rx";
> - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> - renesas,bonding = <&drif00>;
> - };
> -
> -
> -(2) Internal channel 1 alone is enabled:
> -----------------------------------------
> -
> -When interfacing with a third party tuner device with one data pin as shown
> -below.
> -
> -+---------------------+ +---------------------+
> -| |-----SCK------->|CLK |
> -| Master |-----SS-------->|SYNC DRIFn (slave) |
> -| | |D0 (unused) |
> -| |-----SD-------->|D1 |
> -+---------------------+ +---------------------+
> -
> - drif00: rif@e6f40000 {
> - compatible = "renesas,r8a7795-drif",
> - "renesas,rcar-gen3-drif";
> - reg = <0 0xe6f40000 0 0x64>;
> - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cpg CPG_MOD 515>;
> - clock-names = "fck";
> - dmas = <&dmac1 0x20>, <&dmac2 0x20>;
> - dma-names = "rx", "rx";
> - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> - renesas,bonding = <&drif01>;
> - };
> -
> - drif01: rif@e6f50000 {
> - compatible = "renesas,r8a7795-drif",
> - "renesas,rcar-gen3-drif";
> - reg = <0 0xe6f50000 0 0x64>;
> - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cpg CPG_MOD 514>;
> - clock-names = "fck";
> - dmas = <&dmac1 0x22>, <&dmac2 0x22>;
> - dma-names = "rx", "rx";
> - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> - renesas,bonding = <&drif00>;
> - pinctrl-0 = <&drif0_pins>;
> - pinctrl-names = "default";
> - port {
> - drif0_ep: endpoint {
> - remote-endpoint = <&tuner_ep>;
> - sync-active = <0>;
> - };
> - };
> - };
> diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml
> new file mode 100644
> index 000000000000..3832ce837553
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml
> @@ -0,0 +1,277 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/renesas,drif.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Renesas R-Car Gen3 Digital Radio Interface Controller (DRIF)
> +
> +maintainers:
> + - Ramesh Shanmugasundaram <rashanmu@gmail.com>
> + - Fabrizio Castro <fabrizio.castro.jz@renesas.com>
> +
> +description: |
> + R-Car Gen3 DRIF is a SPI like receive only slave device. A general
> + representation of DRIF interfacing with a master device is shown below.
> +
> + +---------------------+ +---------------------+
> + | |-----SCK------->|CLK |
> + | Master |-----SS-------->|SYNC DRIFn (slave) |
> + | |-----SD0------->|D0 |
> + | |-----SD1------->|D1 |
> + +---------------------+ +---------------------+
> +
> + As per datasheet, each DRIF channel (drifn) is made up of two internal
> + channels (drifn0 & drifn1). These two internal channels share the common
> + CLK & SYNC. Each internal channel has its own dedicated resources like
> + irq, dma channels, address space & clock. This internal split is not
> + visible to the external master device.
> +
> + The device tree model represents each internal channel as a separate node.
> + The internal channels sharing the CLK & SYNC are tied together by their
> + phandles using a property called "renesas,bonding". For the rest of
> + the documentation, unless explicitly stated, the word channel implies an
> + internal channel.
> +
> + When both internal channels are enabled they need to be managed together
> + as one (i.e.) they cannot operate alone as independent devices. Out of the
> + two, one of them needs to act as a primary device that accepts common
> + properties of both the internal channels. This channel is identified by a
> + property called "renesas,primary-bond".
> +
> + To summarize,
> + * When both the internal channels that are bonded together are enabled,
> + the zeroth channel is selected as primary-bond. This channels accepts
> + properties common to all the members of the bond.
> + * When only one of the bonded channels need to be enabled, the property
> + "renesas,bonding" or "renesas,primary-bond" will have no effect. That
> + enabled channel can act alone as any other independent device.
> +
> +properties:
> + compatible:
> + items:
> + - enum:
> + - renesas,r8a7795-drif # R-Car H3
> + - renesas,r8a7796-drif # R-Car M3-W
Note the bot error is from yamllint which just got added to the checks.
Need 2 more spaces indent here.
With that,
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 11+ messages in thread* RE: [PATCH v4 2/5] media: dt-bindings: media: renesas,drif: Convert to json-schema
2020-10-16 15:55 ` Rob Herring
@ 2020-10-21 13:48 ` Fabrizio Castro
0 siblings, 0 replies; 11+ messages in thread
From: Fabrizio Castro @ 2020-10-21 13:48 UTC (permalink / raw)
To: Rob Herring
Cc: Mauro Carvalho Chehab, Geert Uytterhoeven,
Ramesh Shanmugasundaram, linux-media@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-renesas-soc@vger.kernel.org, Chris Paterson, Biju Das,
Prabhakar Mahadev Lad, Laurent Pinchart
Hi Rob,
Thank you for your feedback.
> From: Rob Herring <robh@kernel.org>
> Sent: 16 October 2020 16:56
> Subject: Re: [PATCH v4 2/5] media: dt-bindings: media: renesas,drif: Convert to
> json-schema
>
> On Wed, Oct 14, 2020 at 04:57:16PM +0100, Fabrizio Castro wrote:
> > Convert the Renesas DRIF bindings to DT schema and update
> > MAINTAINERS accordingly.
> >
> > Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
> > Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> > ---
> > v3->v4:
> > * Replace "if" statement with "else" statement for the branch
> > rejecting pinctrl-0 and pinctrl-names properties, as suggested
> > by Geert
> > v2->v3:
> > * Removed the definition of pinctrl-0 and pinctrl-names, as
> > suggested by Geert
> > * Added "power-domains" to the list of required properties,
> > as suggested by Geert
> > v1->v2:
> > * s/controller/Controller/ in the title of renesas,drif.yaml
> > as suggested by Laurent.
> >
> > .../bindings/media/renesas,drif.txt | 177 -----------
> > .../bindings/media/renesas,drif.yaml | 277 ++++++++++++++++++
> > MAINTAINERS | 2 +-
> > 3 files changed, 278 insertions(+), 178 deletions(-)
> > delete mode 100644
> Documentation/devicetree/bindings/media/renesas,drif.txt
> > create mode 100644
> Documentation/devicetree/bindings/media/renesas,drif.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/media/renesas,drif.txt
> b/Documentation/devicetree/bindings/media/renesas,drif.txt
> > deleted file mode 100644
> > index 0d8974aa8b38..000000000000
> > --- a/Documentation/devicetree/bindings/media/renesas,drif.txt
> > +++ /dev/null
> > @@ -1,177 +0,0 @@
> > -Renesas R-Car Gen3 Digital Radio Interface controller (DRIF)
> > -------------------------------------------------------------
> > -
> > -R-Car Gen3 DRIF is a SPI like receive only slave device. A general
> > -representation of DRIF interfacing with a master device is shown below.
> > -
> > -+---------------------+ +---------------------+
> > -| |-----SCK------->|CLK |
> > -| Master |-----SS-------->|SYNC DRIFn (slave) |
> > -| |-----SD0------->|D0 |
> > -| |-----SD1------->|D1 |
> > -+---------------------+ +---------------------+
> > -
> > -As per datasheet, each DRIF channel (drifn) is made up of two internal
> > -channels (drifn0 & drifn1). These two internal channels share the common
> > -CLK & SYNC. Each internal channel has its own dedicated resources like
> > -irq, dma channels, address space & clock. This internal split is not
> > -visible to the external master device.
> > -
> > -The device tree model represents each internal channel as a separate node.
> > -The internal channels sharing the CLK & SYNC are tied together by their
> > -phandles using a property called "renesas,bonding". For the rest of
> > -the documentation, unless explicitly stated, the word channel implies an
> > -internal channel.
> > -
> > -When both internal channels are enabled they need to be managed together
> > -as one (i.e.) they cannot operate alone as independent devices. Out of the
> > -two, one of them needs to act as a primary device that accepts common
> > -properties of both the internal channels. This channel is identified by a
> > -property called "renesas,primary-bond".
> > -
> > -To summarize,
> > - - When both the internal channels that are bonded together are enabled,
> > - the zeroth channel is selected as primary-bond. This channels accepts
> > - properties common to all the members of the bond.
> > - - When only one of the bonded channels need to be enabled, the property
> > - "renesas,bonding" or "renesas,primary-bond" will have no effect. That
> > - enabled channel can act alone as any other independent device.
> > -
> > -Required properties of an internal channel:
> > --------------------------------------------
> > -- compatible: "renesas,r8a7795-drif" if DRIF controller is a part of R8A7795
> SoC.
> > - "renesas,r8a7796-drif" if DRIF controller is a part of R8A7796
> SoC.
> > - "renesas,rcar-gen3-drif" for a generic R-Car Gen3 compatible
> device.
> > -
> > - When compatible with the generic version, nodes must list the
> > - SoC-specific version corresponding to the platform first
> > - followed by the generic version.
> > -
> > -- reg: offset and length of that channel.
> > -- interrupts: associated with that channel.
> > -- clocks: phandle and clock specifier of that channel.
> > -- clock-names: clock input name string: "fck".
> > -- dmas: phandles to the DMA channels.
> > -- dma-names: names of the DMA channel: "rx".
> > -- renesas,bonding: phandle to the other channel.
> > -
> > -Optional properties of an internal channel:
> > --------------------------------------------
> > -- power-domains: phandle to the respective power domain.
> > -
> > -Required properties of an internal channel when:
> > - - It is the only enabled channel of the bond (or)
> > - - If it acts as primary among enabled bonds
> > ---------------------------------------------------------
> > -- pinctrl-0: pin control group to be used for this channel.
> > -- pinctrl-names: must be "default".
> > -- renesas,primary-bond: empty property indicating the channel acts as
> primary
> > - among the bonded channels.
> > -- port: child port node corresponding to the data input, in accordance with
> > - the video interface bindings defined in
> > - Documentation/devicetree/bindings/media/video-interfaces.txt. The
> port
> > - node must contain at least one endpoint.
> > -
> > -Optional endpoint property:
> > ----------------------------
> > -- sync-active: Indicates sync signal polarity, 0/1 for low/high respectively.
> > - This property maps to SYNCAC bit in the hardware manual. The
> > - default is 1 (active high).
> > -
> > -Example:
> > ---------
> > -
> > -(1) Both internal channels enabled:
> > ------------------------------------
> > -
> > -When interfacing with a third party tuner device with two data pins as shown
> > -below.
> > -
> > -+---------------------+ +---------------------+
> > -| |-----SCK------->|CLK |
> > -| Master |-----SS-------->|SYNC DRIFn (slave) |
> > -| |-----SD0------->|D0 |
> > -| |-----SD1------->|D1 |
> > -+---------------------+ +---------------------+
> > -
> > - drif00: rif@e6f40000 {
> > - compatible = "renesas,r8a7795-drif",
> > - "renesas,rcar-gen3-drif";
> > - reg = <0 0xe6f40000 0 0x64>;
> > - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> > - clocks = <&cpg CPG_MOD 515>;
> > - clock-names = "fck";
> > - dmas = <&dmac1 0x20>, <&dmac2 0x20>;
> > - dma-names = "rx", "rx";
> > - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> > - renesas,bonding = <&drif01>;
> > - renesas,primary-bond;
> > - pinctrl-0 = <&drif0_pins>;
> > - pinctrl-names = "default";
> > - port {
> > - drif0_ep: endpoint {
> > - remote-endpoint = <&tuner_ep>;
> > - };
> > - };
> > - };
> > -
> > - drif01: rif@e6f50000 {
> > - compatible = "renesas,r8a7795-drif",
> > - "renesas,rcar-gen3-drif";
> > - reg = <0 0xe6f50000 0 0x64>;
> > - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> > - clocks = <&cpg CPG_MOD 514>;
> > - clock-names = "fck";
> > - dmas = <&dmac1 0x22>, <&dmac2 0x22>;
> > - dma-names = "rx", "rx";
> > - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> > - renesas,bonding = <&drif00>;
> > - };
> > -
> > -
> > -(2) Internal channel 1 alone is enabled:
> > -----------------------------------------
> > -
> > -When interfacing with a third party tuner device with one data pin as shown
> > -below.
> > -
> > -+---------------------+ +---------------------+
> > -| |-----SCK------->|CLK |
> > -| Master |-----SS-------->|SYNC DRIFn (slave) |
> > -| | |D0 (unused) |
> > -| |-----SD-------->|D1 |
> > -+---------------------+ +---------------------+
> > -
> > - drif00: rif@e6f40000 {
> > - compatible = "renesas,r8a7795-drif",
> > - "renesas,rcar-gen3-drif";
> > - reg = <0 0xe6f40000 0 0x64>;
> > - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> > - clocks = <&cpg CPG_MOD 515>;
> > - clock-names = "fck";
> > - dmas = <&dmac1 0x20>, <&dmac2 0x20>;
> > - dma-names = "rx", "rx";
> > - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> > - renesas,bonding = <&drif01>;
> > - };
> > -
> > - drif01: rif@e6f50000 {
> > - compatible = "renesas,r8a7795-drif",
> > - "renesas,rcar-gen3-drif";
> > - reg = <0 0xe6f50000 0 0x64>;
> > - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> > - clocks = <&cpg CPG_MOD 514>;
> > - clock-names = "fck";
> > - dmas = <&dmac1 0x22>, <&dmac2 0x22>;
> > - dma-names = "rx", "rx";
> > - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> > - renesas,bonding = <&drif00>;
> > - pinctrl-0 = <&drif0_pins>;
> > - pinctrl-names = "default";
> > - port {
> > - drif0_ep: endpoint {
> > - remote-endpoint = <&tuner_ep>;
> > - sync-active = <0>;
> > - };
> > - };
> > - };
> > diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml
> b/Documentation/devicetree/bindings/media/renesas,drif.yaml
> > new file mode 100644
> > index 000000000000..3832ce837553
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml
> > @@ -0,0 +1,277 @@
> > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/renesas,drif.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Renesas R-Car Gen3 Digital Radio Interface Controller (DRIF)
> > +
> > +maintainers:
> > + - Ramesh Shanmugasundaram <rashanmu@gmail.com>
> > + - Fabrizio Castro <fabrizio.castro.jz@renesas.com>
> > +
> > +description: |
> > + R-Car Gen3 DRIF is a SPI like receive only slave device. A general
> > + representation of DRIF interfacing with a master device is shown below.
> > +
> > + +---------------------+ +---------------------+
> > + | |-----SCK------->|CLK |
> > + | Master |-----SS-------->|SYNC DRIFn (slave) |
> > + | |-----SD0------->|D0 |
> > + | |-----SD1------->|D1 |
> > + +---------------------+ +---------------------+
> > +
> > + As per datasheet, each DRIF channel (drifn) is made up of two internal
> > + channels (drifn0 & drifn1). These two internal channels share the common
> > + CLK & SYNC. Each internal channel has its own dedicated resources like
> > + irq, dma channels, address space & clock. This internal split is not
> > + visible to the external master device.
> > +
> > + The device tree model represents each internal channel as a separate node.
> > + The internal channels sharing the CLK & SYNC are tied together by their
> > + phandles using a property called "renesas,bonding". For the rest of
> > + the documentation, unless explicitly stated, the word channel implies an
> > + internal channel.
> > +
> > + When both internal channels are enabled they need to be managed together
> > + as one (i.e.) they cannot operate alone as independent devices. Out of the
> > + two, one of them needs to act as a primary device that accepts common
> > + properties of both the internal channels. This channel is identified by a
> > + property called "renesas,primary-bond".
> > +
> > + To summarize,
> > + * When both the internal channels that are bonded together are enabled,
> > + the zeroth channel is selected as primary-bond. This channels accepts
> > + properties common to all the members of the bond.
> > + * When only one of the bonded channels need to be enabled, the property
> > + "renesas,bonding" or "renesas,primary-bond" will have no effect. That
> > + enabled channel can act alone as any other independent device.
> > +
> > +properties:
> > + compatible:
> > + items:
> > + - enum:
> > + - renesas,r8a7795-drif # R-Car H3
> > + - renesas,r8a7796-drif # R-Car M3-W
>
> Note the bot error is from yamllint which just got added to the checks.
> Need 2 more spaces indent here.
Thank you for reporting this. Unfortunately I wasn't personally able to reproduce this,
but thankfully a colleague of mine (Prabhakar) was able to reproduce the warning on
his setup. I'll send a v5 to fix this.
Thanks,
Fab
>
> With that,
>
> Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v4 3/5] media: dt-bindings: media: renesas,drif: Add r8a77990 support
2020-10-14 15:57 [PATCH v4 0/5] Add r8a77965 DRIF support Fabrizio Castro
2020-10-14 15:57 ` [PATCH v4 1/5] MAINTAINERS: Update MAINTAINERS for Renesas DRIF driver Fabrizio Castro
2020-10-14 15:57 ` [PATCH v4 2/5] media: dt-bindings: media: renesas,drif: Convert to json-schema Fabrizio Castro
@ 2020-10-14 15:57 ` Fabrizio Castro
2020-10-16 16:20 ` Rob Herring
2020-10-14 15:57 ` [PATCH v4 4/5] media: dt-bindings: media: renesas,drif: Add r8a77965 support Fabrizio Castro
2020-10-14 15:57 ` [PATCH v4 5/5] arm64: dts: r8a77965: Add DRIF support Fabrizio Castro
4 siblings, 1 reply; 11+ messages in thread
From: Fabrizio Castro @ 2020-10-14 15:57 UTC (permalink / raw)
To: Mauro Carvalho Chehab, Rob Herring, Geert Uytterhoeven
Cc: Fabrizio Castro, Ramesh Shanmugasundaram, linux-media, devicetree,
linux-kernel, linux-renesas-soc, Chris Paterson, Biju Das,
Prabhakar Mahadev Lad, Laurent Pinchart
The r8a77990 (a.k.a. R-Car E3) device tree schema is
compatible with R-Car H3 and M3-W schema.
Document r8a77990 support within renesas,drif.yaml.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v3->v4:
* No change
v2->v3:
* No change
v1->v2:
* No change
Documentation/devicetree/bindings/media/renesas,drif.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml
index 3832ce837553..478968345aa9 100644
--- a/Documentation/devicetree/bindings/media/renesas,drif.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml
@@ -53,6 +53,7 @@ properties:
- enum:
- renesas,r8a7795-drif # R-Car H3
- renesas,r8a7796-drif # R-Car M3-W
+ - renesas,r8a77990-drif # R-Car E3
- const: renesas,rcar-gen3-drif # Generic R-Car Gen3 compatible device
reg:
--
2.25.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [PATCH v4 3/5] media: dt-bindings: media: renesas,drif: Add r8a77990 support
2020-10-14 15:57 ` [PATCH v4 3/5] media: dt-bindings: media: renesas,drif: Add r8a77990 support Fabrizio Castro
@ 2020-10-16 16:20 ` Rob Herring
0 siblings, 0 replies; 11+ messages in thread
From: Rob Herring @ 2020-10-16 16:20 UTC (permalink / raw)
To: Fabrizio Castro
Cc: Prabhakar Mahadev Lad, linux-renesas-soc, devicetree,
Chris Paterson, Mauro Carvalho Chehab, linux-media,
Ramesh Shanmugasundaram, linux-kernel, Biju Das, Laurent Pinchart,
Geert Uytterhoeven, Rob Herring
On Wed, 14 Oct 2020 16:57:17 +0100, Fabrizio Castro wrote:
> The r8a77990 (a.k.a. R-Car E3) device tree schema is
> compatible with R-Car H3 and M3-W schema.
>
> Document r8a77990 support within renesas,drif.yaml.
>
> Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> v3->v4:
> * No change
> v2->v3:
> * No change
> v1->v2:
> * No change
>
> Documentation/devicetree/bindings/media/renesas,drif.yaml | 1 +
> 1 file changed, 1 insertion(+)
>
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v4 4/5] media: dt-bindings: media: renesas,drif: Add r8a77965 support
2020-10-14 15:57 [PATCH v4 0/5] Add r8a77965 DRIF support Fabrizio Castro
` (2 preceding siblings ...)
2020-10-14 15:57 ` [PATCH v4 3/5] media: dt-bindings: media: renesas,drif: Add r8a77990 support Fabrizio Castro
@ 2020-10-14 15:57 ` Fabrizio Castro
2020-10-19 20:49 ` Rob Herring
2020-10-14 15:57 ` [PATCH v4 5/5] arm64: dts: r8a77965: Add DRIF support Fabrizio Castro
4 siblings, 1 reply; 11+ messages in thread
From: Fabrizio Castro @ 2020-10-14 15:57 UTC (permalink / raw)
To: Mauro Carvalho Chehab, Rob Herring, Geert Uytterhoeven
Cc: Fabrizio Castro, Ramesh Shanmugasundaram, linux-media, devicetree,
linux-kernel, linux-renesas-soc, Chris Paterson, Biju Das,
Prabhakar Mahadev Lad, Laurent Pinchart
The r8a77965 (a.k.a. R-Car M3-N) device tree schema is
compatible with the already documented R-Car Gen3 devices.
Document r8a77965 support within renesas,drif.yaml.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v3->v4:
* No change
v2->v3:
* New patch
Documentation/devicetree/bindings/media/renesas,drif.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml
index 478968345aa9..0fe79f9e8eb9 100644
--- a/Documentation/devicetree/bindings/media/renesas,drif.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml
@@ -53,6 +53,7 @@ properties:
- enum:
- renesas,r8a7795-drif # R-Car H3
- renesas,r8a7796-drif # R-Car M3-W
+ - renesas,r8a77965-drif # R-Car M3-N
- renesas,r8a77990-drif # R-Car E3
- const: renesas,rcar-gen3-drif # Generic R-Car Gen3 compatible device
--
2.25.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [PATCH v4 4/5] media: dt-bindings: media: renesas,drif: Add r8a77965 support
2020-10-14 15:57 ` [PATCH v4 4/5] media: dt-bindings: media: renesas,drif: Add r8a77965 support Fabrizio Castro
@ 2020-10-19 20:49 ` Rob Herring
0 siblings, 0 replies; 11+ messages in thread
From: Rob Herring @ 2020-10-19 20:49 UTC (permalink / raw)
To: Fabrizio Castro
Cc: Geert Uytterhoeven, linux-media, linux-kernel, Biju Das,
Ramesh Shanmugasundaram, Rob Herring, Mauro Carvalho Chehab,
Prabhakar Mahadev Lad, linux-renesas-soc, Chris Paterson,
Laurent Pinchart, devicetree
On Wed, 14 Oct 2020 16:57:18 +0100, Fabrizio Castro wrote:
> The r8a77965 (a.k.a. R-Car M3-N) device tree schema is
> compatible with the already documented R-Car Gen3 devices.
>
> Document r8a77965 support within renesas,drif.yaml.
>
> Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> v3->v4:
> * No change
> v2->v3:
> * New patch
>
> Documentation/devicetree/bindings/media/renesas,drif.yaml | 1 +
> 1 file changed, 1 insertion(+)
>
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v4 5/5] arm64: dts: r8a77965: Add DRIF support
2020-10-14 15:57 [PATCH v4 0/5] Add r8a77965 DRIF support Fabrizio Castro
` (3 preceding siblings ...)
2020-10-14 15:57 ` [PATCH v4 4/5] media: dt-bindings: media: renesas,drif: Add r8a77965 support Fabrizio Castro
@ 2020-10-14 15:57 ` Fabrizio Castro
4 siblings, 0 replies; 11+ messages in thread
From: Fabrizio Castro @ 2020-10-14 15:57 UTC (permalink / raw)
To: Mauro Carvalho Chehab, Rob Herring, Geert Uytterhoeven
Cc: Fabrizio Castro, Ramesh Shanmugasundaram, linux-media, devicetree,
linux-kernel, linux-renesas-soc, Chris Paterson, Biju Das,
Prabhakar Mahadev Lad, Laurent Pinchart
Add the DRIF controller nodes for r8a77965 (a.k.a. R-Car M3-N).
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
v3->v4:
* No change
v2->v3:
* New patch
arch/arm64/boot/dts/renesas/r8a77965.dtsi | 120 ++++++++++++++++++++++
1 file changed, 120 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index fe4dc12e2bdf..c5a54dc7ede2 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -1550,6 +1550,126 @@ vin7csi40: endpoint@2 {
};
};
+ drif00: rif@e6f40000 {
+ compatible = "renesas,r8a77965-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f40000 0 0x84>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 515>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x20>, <&dmac2 0x20>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 515>;
+ renesas,bonding = <&drif01>;
+ status = "disabled";
+ };
+
+ drif01: rif@e6f50000 {
+ compatible = "renesas,r8a77965-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f50000 0 0x84>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 514>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x22>, <&dmac2 0x22>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 514>;
+ renesas,bonding = <&drif00>;
+ status = "disabled";
+ };
+
+ drif10: rif@e6f60000 {
+ compatible = "renesas,r8a77965-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f60000 0 0x84>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 513>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x24>, <&dmac2 0x24>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 513>;
+ renesas,bonding = <&drif11>;
+ status = "disabled";
+ };
+
+ drif11: rif@e6f70000 {
+ compatible = "renesas,r8a77965-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f70000 0 0x84>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 512>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x26>, <&dmac2 0x26>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 512>;
+ renesas,bonding = <&drif10>;
+ status = "disabled";
+ };
+
+ drif20: rif@e6f80000 {
+ compatible = "renesas,r8a77965-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f80000 0 0x84>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 511>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x28>, <&dmac2 0x28>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 511>;
+ renesas,bonding = <&drif21>;
+ status = "disabled";
+ };
+
+ drif21: rif@e6f90000 {
+ compatible = "renesas,r8a77965-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f90000 0 0x84>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 510>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x2a>, <&dmac2 0x2a>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 510>;
+ renesas,bonding = <&drif20>;
+ status = "disabled";
+ };
+
+ drif30: rif@e6fa0000 {
+ compatible = "renesas,r8a77965-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6fa0000 0 0x84>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 509>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x2c>, <&dmac2 0x2c>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 509>;
+ renesas,bonding = <&drif31>;
+ status = "disabled";
+ };
+
+ drif31: rif@e6fb0000 {
+ compatible = "renesas,r8a77965-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6fb0000 0 0x84>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 508>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x2e>, <&dmac2 0x2e>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 508>;
+ renesas,bonding = <&drif30>;
+ status = "disabled";
+ };
+
rcar_sound: sound@ec500000 {
/*
* #sound-dai-cells is required
--
2.25.1
^ permalink raw reply related [flat|nested] 11+ messages in thread