From: Chen-Yu Tsai <wens@kernel.org>
To: Maxime Ripard <mripard@kernel.org>,
Jernej Skrabec <jernej.skrabec@siol.net>
Cc: devicetree@vger.kernel.org, linux-sunxi@googlegroups.com,
Chen-Yu Tsai <wens@csie.org>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 07/10] ARM: dts: sun9i: Enable both RGMII RX/TX delay on Ethernet PHY
Date: Sun, 25 Oct 2020 00:25:12 +0800 [thread overview]
Message-ID: <20201024162515.30032-7-wens@kernel.org> (raw)
In-Reply-To: <20201024162515.30032-1-wens@kernel.org>
From: Chen-Yu Tsai <wens@csie.org>
The Ethernet PHY on the Cubieboard 4 and A80 Optimus have the RX
and TX delays enabled on the PHY, using pull-ups on the RXDLY and
TXDLY pins.
Fix the phy-mode description to correct reflect this so that the
implementation doesn't reconfigure the delays incorrectly. This
happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e
rx/tx delay config").
Fixes: 98048143b7f8 ("ARM: dts: sun9i: cubieboard4: Enable GMAC")
Fixes: bc9bd03a44f9 ("ARM: dts: sun9i: a80-optimus: Enable GMAC")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm/boot/dts/sun9i-a80-cubieboard4.dts | 2 +-
arch/arm/boot/dts/sun9i-a80-optimus.dts | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
index d3b337b043a1..484b93df20cb 100644
--- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
+++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
@@ -129,7 +129,7 @@ &gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-supply = <®_cldo1>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts
index bbc6335e5631..5c3580d712e4 100644
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
@@ -124,7 +124,7 @@ &gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-supply = <®_cldo1>;
status = "okay";
};
--
2.28.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Chen-Yu Tsai <wens@kernel.org>
To: Maxime Ripard <mripard@kernel.org>,
Jernej Skrabec <jernej.skrabec@siol.net>
Cc: linux-sunxi@googlegroups.com, Chen-Yu Tsai <wens@csie.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 07/10] ARM: dts: sun9i: Enable both RGMII RX/TX delay on Ethernet PHY
Date: Sun, 25 Oct 2020 00:25:12 +0800 [thread overview]
Message-ID: <20201024162515.30032-7-wens@kernel.org> (raw)
In-Reply-To: <20201024162515.30032-1-wens@kernel.org>
From: Chen-Yu Tsai <wens@csie.org>
The Ethernet PHY on the Cubieboard 4 and A80 Optimus have the RX
and TX delays enabled on the PHY, using pull-ups on the RXDLY and
TXDLY pins.
Fix the phy-mode description to correct reflect this so that the
implementation doesn't reconfigure the delays incorrectly. This
happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e
rx/tx delay config").
Fixes: 98048143b7f8 ("ARM: dts: sun9i: cubieboard4: Enable GMAC")
Fixes: bc9bd03a44f9 ("ARM: dts: sun9i: a80-optimus: Enable GMAC")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm/boot/dts/sun9i-a80-cubieboard4.dts | 2 +-
arch/arm/boot/dts/sun9i-a80-optimus.dts | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
index d3b337b043a1..484b93df20cb 100644
--- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
+++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
@@ -129,7 +129,7 @@ &gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-supply = <®_cldo1>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts
index bbc6335e5631..5c3580d712e4 100644
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
@@ -124,7 +124,7 @@ &gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-supply = <®_cldo1>;
status = "okay";
};
--
2.28.0
next prev parent reply other threads:[~2020-10-24 16:28 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-24 16:25 [PATCH 01/10] Revert "arm: sun8i: orangepi-pc-plus: Set EMAC activity LEDs to active high" Chen-Yu Tsai
2020-10-24 16:25 ` Chen-Yu Tsai
2020-10-24 16:25 ` [PATCH 02/10] ARM: dts: sun6i: a31-hummingbird: Enable RGMII RX/TX delay on Ethernet PHY Chen-Yu Tsai
2020-10-24 16:25 ` Chen-Yu Tsai
2020-10-24 17:51 ` [linux-sunxi] " Icenowy Zheng
2020-10-24 17:51 ` Icenowy Zheng
2020-10-24 18:30 ` Jernej Škrabec
2020-10-24 18:30 ` Jernej Škrabec
2020-10-24 18:39 ` Icenowy Zheng
2020-10-24 18:39 ` Icenowy Zheng
2020-10-24 19:09 ` Clément Péron
2020-10-24 19:09 ` Clément Péron
2020-10-26 7:38 ` Ard Biesheuvel
2020-10-26 7:38 ` Ard Biesheuvel
2020-10-25 8:58 ` Jernej Škrabec
2020-10-25 8:58 ` Jernej Škrabec
2020-10-24 16:25 ` [PATCH 03/10] ARM: dts: sun7i: cubietruck: " Chen-Yu Tsai
2020-10-24 16:25 ` Chen-Yu Tsai
2020-10-24 17:04 ` [linux-sunxi] " Emilio López
2020-10-24 17:04 ` Emilio López
2020-10-24 16:25 ` [PATCH 04/10] ARM: dts: sun7i: bananapi-m1-plus: " Chen-Yu Tsai
2020-10-24 16:25 ` Chen-Yu Tsai
2020-10-25 8:51 ` Jernej Škrabec
2020-10-25 8:51 ` Jernej Škrabec
2020-10-24 16:25 ` [PATCH 05/10] ARM: dts: sun8i: h3: orangepi-plus2e: " Chen-Yu Tsai
2020-10-24 16:25 ` Chen-Yu Tsai
2020-10-25 7:53 ` Jernej Škrabec
2020-10-25 7:53 ` Jernej Škrabec
2020-10-24 16:25 ` [PATCH 06/10] ARM: dts: sun8i: a83t: Enable both " Chen-Yu Tsai
2020-10-24 16:25 ` Chen-Yu Tsai
2020-10-25 8:48 ` Jernej Škrabec
2020-10-25 8:48 ` Jernej Škrabec
2020-10-24 16:25 ` Chen-Yu Tsai [this message]
2020-10-24 16:25 ` [PATCH 07/10] ARM: dts: sun9i: " Chen-Yu Tsai
2020-10-25 8:40 ` Jernej Škrabec
2020-10-25 8:40 ` Jernej Škrabec
2020-10-24 16:25 ` [PATCH 08/10] ARM: dts: sunxi: bananapi-m2-plus: Enable " Chen-Yu Tsai
2020-10-24 16:25 ` Chen-Yu Tsai
2020-10-25 8:01 ` Jernej Škrabec
2020-10-25 8:01 ` Jernej Škrabec
2020-10-24 16:25 ` [PATCH 09/10] arm64: dts: allwinner: h5: libretech-all-h5-cc: Enable RGMII RX/TX delay on PHY Chen-Yu Tsai
2020-10-24 16:25 ` Chen-Yu Tsai
2020-10-25 9:02 ` Jernej Škrabec
2020-10-25 9:02 ` Jernej Škrabec
2020-10-24 16:25 ` [PATCH 10/10] arm64: dts: allwinner: a64: bananapi-m64: " Chen-Yu Tsai
2020-10-24 16:25 ` Chen-Yu Tsai
2020-10-24 19:58 ` [linux-sunxi] " Corentin Labbe
2020-10-24 19:58 ` Corentin Labbe
2020-10-25 8:34 ` Jernej Škrabec
2020-10-25 8:34 ` Jernej Škrabec
2020-10-26 10:24 ` Maxime Ripard
2020-10-26 10:24 ` Maxime Ripard
2020-10-25 7:35 ` [PATCH 01/10] Revert "arm: sun8i: orangepi-pc-plus: Set EMAC activity LEDs to active high" Jernej Škrabec
2020-10-25 7:35 ` Jernej Škrabec
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201024162515.30032-7-wens@kernel.org \
--to=wens@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jernej.skrabec@siol.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=mripard@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.