All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tony Lindgren <tony@atomide.com>
To: linux-omap@vger.kernel.org
Cc: "Andrew F . Davis" <afd@ti.com>, Dave Gerlach <d-gerlach@ti.com>,
	Faiz Abbas <faiz_abbas@ti.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Grygorii Strashko <grygorii.strashko@ti.com>,
	Keerthy <j-keerthy@ti.com>, Nishanth Menon <nm@ti.com>,
	Peter Ujfalusi <peter.ujfalusi@ti.com>,
	Roger Quadros <rogerq@ti.com>, Suman Anna <s-anna@ti.com>,
	Tero Kristo <t-kristo@ti.com>,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Santosh Shilimkar <ssantosh@kernel.org>,
	Stephen Boyd <sboyd@kernel.org>,
	linux-clk@vger.kernel.org, linux-remoteproc@vger.kernel.org
Subject: [PATCH 5/9] bus: ti-sysc: Implement GPMC debug quirk to drop platform data
Date: Mon, 26 Oct 2020 13:10:45 +0200	[thread overview]
Message-ID: <20201026111049.54835-6-tony@atomide.com> (raw)
In-Reply-To: <20201026111049.54835-1-tony@atomide.com>

We need to enable no-reset-on-init quirk for GPMC if the config
option for CONFIG_OMAP_GPMC_DEBUG is set. Otherwise the GPMC
driver code is unable to show the bootloader configured timings.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/bus/ti-sysc.c                 | 10 ++++++++++
 include/linux/platform_data/ti-sysc.h |  1 +
 2 files changed, 11 insertions(+)

diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -1382,6 +1382,8 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
 		   SYSC_QUIRK_CLKDM_NOAUTO),
 	SYSC_QUIRK("dwc3", 0x488c0000, 0, 0x10, -ENODEV, 0x500a0200, 0xffffffff,
 		   SYSC_QUIRK_CLKDM_NOAUTO),
+	SYSC_QUIRK("gpmc", 0, 0, 0x10, 0x14, 0x00000060, 0xffffffff,
+		   SYSC_QUIRK_GPMC_DEBUG),
 	SYSC_QUIRK("hdmi", 0, 0, 0x10, -ENODEV, 0x50030200, 0xffffffff,
 		   SYSC_QUIRK_OPT_CLKS_NEEDED),
 	SYSC_QUIRK("hdq1w", 0, 0, 0x14, 0x18, 0x00000006, 0xffffffff,
@@ -1815,6 +1817,14 @@ static void sysc_init_module_quirks(struct sysc *ddata)
 		return;
 	}
 
+#ifdef CONFIG_OMAP_GPMC_DEBUG
+	if (ddata->cfg.quirks & SYSC_QUIRK_GPMC_DEBUG) {
+		ddata->cfg.quirks |= SYSC_QUIRK_NO_RESET_ON_INIT;
+
+		return;
+	}
+#endif
+
 	if (ddata->cfg.quirks & SYSC_MODULE_QUIRK_I2C) {
 		ddata->pre_reset_quirk = sysc_pre_reset_quirk_i2c;
 		ddata->post_reset_quirk = sysc_post_reset_quirk_i2c;
diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h
--- a/include/linux/platform_data/ti-sysc.h
+++ b/include/linux/platform_data/ti-sysc.h
@@ -50,6 +50,7 @@ struct sysc_regbits {
 	s8 emufree_shift;
 };
 
+#define SYSC_QUIRK_GPMC_DEBUG		BIT(26)
 #define SYSC_MODULE_QUIRK_ENA_RESETDONE	BIT(25)
 #define SYSC_MODULE_QUIRK_PRUSS		BIT(24)
 #define SYSC_MODULE_QUIRK_DSS_RESET	BIT(23)
-- 
2.29.1

WARNING: multiple messages have this Message-ID (diff)
From: Tony Lindgren <tony@atomide.com>
To: linux-omap@vger.kernel.org
Cc: Nishanth Menon <nm@ti.com>, Tero Kristo <t-kristo@ti.com>,
	Grygorii Strashko <grygorii.strashko@ti.com>,
	Dave Gerlach <d-gerlach@ti.com>, Stephen Boyd <sboyd@kernel.org>,
	Keerthy <j-keerthy@ti.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Santosh Shilimkar <ssantosh@kernel.org>,
	linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org,
	"Andrew F . Davis" <afd@ti.com>,
	Peter Ujfalusi <peter.ujfalusi@ti.com>,
	Faiz Abbas <faiz_abbas@ti.com>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	Roger Quadros <rogerq@ti.com>
Subject: [PATCH 5/9] bus: ti-sysc: Implement GPMC debug quirk to drop platform data
Date: Mon, 26 Oct 2020 13:10:45 +0200	[thread overview]
Message-ID: <20201026111049.54835-6-tony@atomide.com> (raw)
In-Reply-To: <20201026111049.54835-1-tony@atomide.com>

We need to enable no-reset-on-init quirk for GPMC if the config
option for CONFIG_OMAP_GPMC_DEBUG is set. Otherwise the GPMC
driver code is unable to show the bootloader configured timings.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/bus/ti-sysc.c                 | 10 ++++++++++
 include/linux/platform_data/ti-sysc.h |  1 +
 2 files changed, 11 insertions(+)

diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -1382,6 +1382,8 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
 		   SYSC_QUIRK_CLKDM_NOAUTO),
 	SYSC_QUIRK("dwc3", 0x488c0000, 0, 0x10, -ENODEV, 0x500a0200, 0xffffffff,
 		   SYSC_QUIRK_CLKDM_NOAUTO),
+	SYSC_QUIRK("gpmc", 0, 0, 0x10, 0x14, 0x00000060, 0xffffffff,
+		   SYSC_QUIRK_GPMC_DEBUG),
 	SYSC_QUIRK("hdmi", 0, 0, 0x10, -ENODEV, 0x50030200, 0xffffffff,
 		   SYSC_QUIRK_OPT_CLKS_NEEDED),
 	SYSC_QUIRK("hdq1w", 0, 0, 0x14, 0x18, 0x00000006, 0xffffffff,
@@ -1815,6 +1817,14 @@ static void sysc_init_module_quirks(struct sysc *ddata)
 		return;
 	}
 
+#ifdef CONFIG_OMAP_GPMC_DEBUG
+	if (ddata->cfg.quirks & SYSC_QUIRK_GPMC_DEBUG) {
+		ddata->cfg.quirks |= SYSC_QUIRK_NO_RESET_ON_INIT;
+
+		return;
+	}
+#endif
+
 	if (ddata->cfg.quirks & SYSC_MODULE_QUIRK_I2C) {
 		ddata->pre_reset_quirk = sysc_pre_reset_quirk_i2c;
 		ddata->post_reset_quirk = sysc_post_reset_quirk_i2c;
diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h
--- a/include/linux/platform_data/ti-sysc.h
+++ b/include/linux/platform_data/ti-sysc.h
@@ -50,6 +50,7 @@ struct sysc_regbits {
 	s8 emufree_shift;
 };
 
+#define SYSC_QUIRK_GPMC_DEBUG		BIT(26)
 #define SYSC_MODULE_QUIRK_ENA_RESETDONE	BIT(25)
 #define SYSC_MODULE_QUIRK_PRUSS		BIT(24)
 #define SYSC_MODULE_QUIRK_DSS_RESET	BIT(23)
-- 
2.29.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2020-10-26 11:11 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-26 11:10 [PATCH 0/9] Genpd related code changes to drop am335x pdata Tony Lindgren
2020-10-26 11:10 ` Tony Lindgren
2020-10-26 11:10 ` [PATCH 1/9] ARM: OMAP2+: Check for inited flag Tony Lindgren
2020-10-26 11:10   ` Tony Lindgren
2020-10-26 11:10 ` [PATCH 2/9] ARM: OMAP2+: Probe PRCM first to probe l4_wkup with simple-pm-bus Tony Lindgren
2020-10-26 11:10   ` Tony Lindgren
2020-10-26 11:10 ` [PATCH 3/9] clk: ti: am33xx: Keep am3 l3 main clock always on for genpd Tony Lindgren
2020-10-26 11:10   ` Tony Lindgren
2020-10-26 11:10 ` [PATCH 4/9] bus: ti-sysc: Support modules without control registers Tony Lindgren
2020-10-26 11:10   ` Tony Lindgren
2020-10-26 11:10 ` Tony Lindgren [this message]
2020-10-26 11:10   ` [PATCH 5/9] bus: ti-sysc: Implement GPMC debug quirk to drop platform data Tony Lindgren
2020-10-26 11:10 ` [PATCH 6/9] soc: ti: omap-prm: Add pm_clk for genpd Tony Lindgren
2020-10-26 11:10   ` Tony Lindgren
2020-10-26 11:10 ` [PATCH 7/9] soc: ti: omap-prm: am3: add genpd support for remaining PRM instances Tony Lindgren
2020-10-26 11:10   ` Tony Lindgren
2020-10-26 11:10 ` [PATCH 8/9] soc: ti: pm33xx: Enable basic PM runtime support for genpd Tony Lindgren
2020-10-26 11:10   ` Tony Lindgren
2020-10-26 11:10 ` [PATCH 9/9] remoteproc/wkup_m3: Use reset control driver if available Tony Lindgren
2020-10-26 11:10   ` Tony Lindgren
2020-10-26 11:35   ` Philipp Zabel
2020-10-26 11:35     ` Philipp Zabel
2020-10-26 13:02     ` Tony Lindgren
2020-10-26 13:02       ` Tony Lindgren
2020-10-26 13:13 ` [PATCH 0/9] Genpd related code changes to drop am335x pdata Tony Lindgren
2020-10-26 13:13   ` Tony Lindgren
  -- strict thread matches above, loose matches on Subject: below --
2020-11-10 11:20 [PATCHv2 " Tony Lindgren
2020-11-10 11:20 ` [PATCH 5/9] bus: ti-sysc: Implement GPMC debug quirk to drop platform data Tony Lindgren
2020-11-10 11:20   ` Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201026111049.54835-6-tony@atomide.com \
    --to=tony@atomide.com \
    --cc=afd@ti.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=d-gerlach@ti.com \
    --cc=faiz_abbas@ti.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=grygorii.strashko@ti.com \
    --cc=j-keerthy@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=nm@ti.com \
    --cc=p.zabel@pengutronix.de \
    --cc=peter.ujfalusi@ti.com \
    --cc=rogerq@ti.com \
    --cc=s-anna@ti.com \
    --cc=sboyd@kernel.org \
    --cc=ssantosh@kernel.org \
    --cc=t-kristo@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.