[PATCH v2 0/5] scsi: target: COMPARE AND WRITE miscompare sense

[PATCH v2 0/5] scsi: target: COMPARE AND WRITE miscompare sense

[David Disseldorp]

This patchset adds missing functionality to return the offset of
non-matching read/compare data in the sense INFORMATION field on
COMPARE AND WRITE miscompare.

The functionality can be tested using the libiscsi
CompareAndWrite.MiscompareSense test proposed via:
  https://github.com/sahlberg/libiscsi/pull/344

Changes since v1:
- drop unnecessary WARN_ON()
- fix two checkpatch warnings
- drop single-use nlbas variable
- avoid compare_len recalculation

Cheers, David

 drivers/target/target_core_sbc.c       | 137 +++++++++++++++----------
 drivers/target/target_core_transport.c |  33 +++---
 include/target/target_core_base.h      |   2 +-
 lib/scatterlist.c                      |   2 +-
 4 files changed, 102 insertions(+), 72 deletions(-)

[PATCH v2 0/5] scsi: target: COMPARE AND WRITE miscompare sense

[David Disseldorp]

This patchset adds missing functionality to return the offset of
non-matching read/compare data in the sense INFORMATION field on
COMPARE AND WRITE miscompare.

The functionality can be tested using the libiscsi
CompareAndWrite.MiscompareSense test proposed via:
  https://github.com/sahlberg/libiscsi/pull/344

Changes since v1:
- drop unnecessary WARN_ON()
- fix two checkpatch warnings
- drop single-use nlbas variable
- avoid compare_len recalculation

Cheers, David

 drivers/target/target_core_sbc.c       | 137 +++++++++++++++----------
 drivers/target/target_core_transport.c |  33 +++---
 include/target/target_core_base.h      |   2 +-
 lib/scatterlist.c                      |   2 +-
 4 files changed, 102 insertions(+), 72 deletions(-)

[PATCH v2 1/5] lib/scatterlist: use consistent sg_copy_buffer() return type

[David Disseldorp]

sg_copy_buffer() returns a size_t with the number of bytes copied.
Return 0 instead of false if the copy is skipped.

Signed-off-by: David Disseldorp <ddiss@suse.de>
---
 lib/scatterlist.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/scatterlist.c b/lib/scatterlist.c
index 0a482ef988e5..a59778946404 100644
--- a/lib/scatterlist.c
+++ b/lib/scatterlist.c
@@ -933,7 +933,7 @@ size_t sg_copy_buffer(struct scatterlist *sgl, unsigned int nents, void *buf,
 	sg_miter_start(&miter, sgl, nents, sg_flags);
 
 	if (!sg_miter_skip(&miter, skip))
-		return false;
+		return 0;
 
 	while ((offset < buflen) && sg_miter_next(&miter)) {
 		unsigned int len;
-- 
2.26.2

[PATCH v2 1/5] lib/scatterlist: use consistent sg_copy_buffer() return type

[David Disseldorp]

sg_copy_buffer() returns a size_t with the number of bytes copied.
Return 0 instead of false if the copy is skipped.

Signed-off-by: David Disseldorp <ddiss@suse.de>
---
 lib/scatterlist.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/scatterlist.c b/lib/scatterlist.c
index 0a482ef988e5..a59778946404 100644
--- a/lib/scatterlist.c
+++ b/lib/scatterlist.c
@@ -933,7 +933,7 @@ size_t sg_copy_buffer(struct scatterlist *sgl, unsigned int nents, void *buf,
 	sg_miter_start(&miter, sgl, nents, sg_flags);
 
 	if (!sg_miter_skip(&miter, skip))
-		return false;
+		return 0;
 
 	while ((offset < buflen) && sg_miter_next(&miter)) {
 		unsigned int len;
-- 
2.26.2

Re: [PATCH v2 1/5] lib/scatterlist: use consistent sg_copy_buffer() return type

[Douglas Gilbert]

On 2020-10-26 3:06 p.m., David Disseldorp wrote:
> sg_copy_buffer() returns a size_t with the number of bytes copied.
> Return 0 instead of false if the copy is skipped.
> 
> Signed-off-by: David Disseldorp <ddiss@suse.de>
> ---
>   lib/scatterlist.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/lib/scatterlist.c b/lib/scatterlist.c
> index 0a482ef988e5..a59778946404 100644
> --- a/lib/scatterlist.c
> +++ b/lib/scatterlist.c
> @@ -933,7 +933,7 @@ size_t sg_copy_buffer(struct scatterlist *sgl, unsigned int nents, void *buf,
>   	sg_miter_start(&miter, sgl, nents, sg_flags);
>   
>   	if (!sg_miter_skip(&miter, skip))
> -		return false;
> +		return 0;
>   
>   	while ((offset < buflen) && sg_miter_next(&miter)) {
>   		unsigned int len;
> 

This one probably should be sent by itself as a fix to:
    linux-block@vger.kernel.org

and cc-ed to:
    axboe@kernel.dk

on the assumption that Jens Axboe is the maintainer of lib/scatterlist.c .
He put a fix of mine in sgl_alloc_order() into the kernel recently.

Otherwise:
Reviewed-by: Douglas Gilbert <dgilbert@interlog.com>

Re: [PATCH v2 1/5] lib/scatterlist: use consistent sg_copy_buffer() return type

[Douglas Gilbert]

On 2020-10-26 3:06 p.m., David Disseldorp wrote:
> sg_copy_buffer() returns a size_t with the number of bytes copied.
> Return 0 instead of false if the copy is skipped.
> 
> Signed-off-by: David Disseldorp <ddiss@suse.de>
> ---
>   lib/scatterlist.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/lib/scatterlist.c b/lib/scatterlist.c
> index 0a482ef988e5..a59778946404 100644
> --- a/lib/scatterlist.c
> +++ b/lib/scatterlist.c
> @@ -933,7 +933,7 @@ size_t sg_copy_buffer(struct scatterlist *sgl, unsigned int nents, void *buf,
>   	sg_miter_start(&miter, sgl, nents, sg_flags);
>   
>   	if (!sg_miter_skip(&miter, skip))
> -		return false;
> +		return 0;
>   
>   	while ((offset < buflen) && sg_miter_next(&miter)) {
>   		unsigned int len;
> 

This one probably should be sent by itself as a fix to:
    linux-block@vger.kernel.org

and cc-ed to:
    axboe@kernel.dk

on the assumption that Jens Axboe is the maintainer of lib/scatterlist.c .
He put a fix of mine in sgl_alloc_order() into the kernel recently.

Otherwise:
Reviewed-by: Douglas Gilbert <dgilbert@interlog.com>

Re: [PATCH v2 1/5] lib/scatterlist: use consistent sg_copy_buffer() return type

[David Disseldorp]

On Mon, 26 Oct 2020 16:50:53 -0400, Douglas Gilbert wrote:

> On 2020-10-26 3:06 p.m., David Disseldorp wrote:
> > sg_copy_buffer() returns a size_t with the number of bytes copied.
> > Return 0 instead of false if the copy is skipped.
> > 
> > Signed-off-by: David Disseldorp <ddiss@suse.de>
> > ---
> >   lib/scatterlist.c | 2 +-
> >   1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/lib/scatterlist.c b/lib/scatterlist.c
> > index 0a482ef988e5..a59778946404 100644
> > --- a/lib/scatterlist.c
> > +++ b/lib/scatterlist.c
> > @@ -933,7 +933,7 @@ size_t sg_copy_buffer(struct scatterlist *sgl, unsigned int nents, void *buf,
> >   	sg_miter_start(&miter, sgl, nents, sg_flags);
> >   
> >   	if (!sg_miter_skip(&miter, skip))
> > -		return false;
> > +		return 0;
> >   
> >   	while ((offset < buflen) && sg_miter_next(&miter)) {
> >   		unsigned int len;
> >   
> 
> This one probably should be sent by itself as a fix to:
>     linux-block@vger.kernel.org
> 
> and cc-ed to:
>     axboe@kernel.dk
> 
> on the assumption that Jens Axboe is the maintainer of lib/scatterlist.c .
> He put a fix of mine in sgl_alloc_order() into the kernel recently.
> 
> Otherwise:
> Reviewed-by: Douglas Gilbert <dgilbert@interlog.com>

Sent. Thanks Douglas!

Re: [PATCH v2 1/5] lib/scatterlist: use consistent sg_copy_buffer() return type

[David Disseldorp]

On Mon, 26 Oct 2020 16:50:53 -0400, Douglas Gilbert wrote:

> On 2020-10-26 3:06 p.m., David Disseldorp wrote:
> > sg_copy_buffer() returns a size_t with the number of bytes copied.
> > Return 0 instead of false if the copy is skipped.
> > 
> > Signed-off-by: David Disseldorp <ddiss@suse.de>
> > ---
> >   lib/scatterlist.c | 2 +-
> >   1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/lib/scatterlist.c b/lib/scatterlist.c
> > index 0a482ef988e5..a59778946404 100644
> > --- a/lib/scatterlist.c
> > +++ b/lib/scatterlist.c
> > @@ -933,7 +933,7 @@ size_t sg_copy_buffer(struct scatterlist *sgl, unsigned int nents, void *buf,
> >   	sg_miter_start(&miter, sgl, nents, sg_flags);
> >   
> >   	if (!sg_miter_skip(&miter, skip))
> > -		return false;
> > +		return 0;
> >   
> >   	while ((offset < buflen) && sg_miter_next(&miter)) {
> >   		unsigned int len;
> >   
> 
> This one probably should be sent by itself as a fix to:
>     linux-block@vger.kernel.org
> 
> and cc-ed to:
>     axboe@kernel.dk
> 
> on the assumption that Jens Axboe is the maintainer of lib/scatterlist.c .
> He put a fix of mine in sgl_alloc_order() into the kernel recently.
> 
> Otherwise:
> Reviewed-by: Douglas Gilbert <dgilbert@interlog.com>

Sent. Thanks Douglas!

[PATCH v2 2/5] scsi: target: rename struct sense_info to sense_detail

[David Disseldorp]

This helps distinguish it from the SCSI sense INFORMATION field.

Signed-off-by: David Disseldorp <ddiss@suse.de>
---
 drivers/target/target_core_transport.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index ff26ab0a5f60..caa3a7b34826 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -3094,14 +3094,14 @@ bool transport_wait_for_tasks(struct se_cmd *cmd)
 }
 EXPORT_SYMBOL(transport_wait_for_tasks);
 
-struct sense_info {
+struct sense_detail {
 	u8 key;
 	u8 asc;
 	u8 ascq;
 	bool add_sector_info;
 };
 
-static const struct sense_info sense_info_table[] = {
+static const struct sense_detail sense_detail_table[] = {
 	[TCM_NO_SENSE] = {
 		.key = NOT_READY
 	},
@@ -3261,39 +3261,39 @@ static const struct sense_info sense_info_table[] = {
  */
 static void translate_sense_reason(struct se_cmd *cmd, sense_reason_t reason)
 {
-	const struct sense_info *si;
+	const struct sense_detail *sd;
 	u8 *buffer = cmd->sense_buffer;
 	int r = (__force int)reason;
 	u8 key, asc, ascq;
 	bool desc_format = target_sense_desc_format(cmd->se_dev);
 
-	if (r < ARRAY_SIZE(sense_info_table) && sense_info_table[r].key)
-		si = &sense_info_table[r];
+	if (r < ARRAY_SIZE(sense_detail_table) && sense_detail_table[r].key)
+		sd = &sense_detail_table[r];
 	else
-		si = &sense_info_table[(__force int)
+		sd = &sense_detail_table[(__force int)
 				       TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE];
 
-	key = si->key;
+	key = sd->key;
 	if (reason == TCM_CHECK_CONDITION_UNIT_ATTENTION) {
 		if (!core_scsi3_ua_for_check_condition(cmd, &key, &asc,
 						       &ascq)) {
 			cmd->scsi_status = SAM_STAT_BUSY;
 			return;
 		}
-	} else if (si->asc == 0) {
+	} else if (sd->asc == 0) {
 		WARN_ON_ONCE(cmd->scsi_asc == 0);
 		asc = cmd->scsi_asc;
 		ascq = cmd->scsi_ascq;
 	} else {
-		asc = si->asc;
-		ascq = si->ascq;
+		asc = sd->asc;
+		ascq = sd->ascq;
 	}
 
 	cmd->se_cmd_flags |= SCF_EMULATED_TASK_SENSE;
 	cmd->scsi_status = SAM_STAT_CHECK_CONDITION;
 	cmd->scsi_sense_length  = TRANSPORT_SENSE_BUFFER;
 	scsi_build_sense_buffer(desc_format, buffer, key, asc, ascq);
-	if (si->add_sector_info)
+	if (sd->add_sector_info)
 		WARN_ON_ONCE(scsi_set_sense_information(buffer,
 							cmd->scsi_sense_length,
 							cmd->bad_sector) < 0);
-- 
2.26.2

[PATCH v2 2/5] scsi: target: rename struct sense_info to sense_detail

[David Disseldorp]

This helps distinguish it from the SCSI sense INFORMATION field.

Signed-off-by: David Disseldorp <ddiss@suse.de>
---
 drivers/target/target_core_transport.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index ff26ab0a5f60..caa3a7b34826 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -3094,14 +3094,14 @@ bool transport_wait_for_tasks(struct se_cmd *cmd)
 }
 EXPORT_SYMBOL(transport_wait_for_tasks);
 
-struct sense_info {
+struct sense_detail {
 	u8 key;
 	u8 asc;
 	u8 ascq;
 	bool add_sector_info;
 };
 
-static const struct sense_info sense_info_table[] = {
+static const struct sense_detail sense_detail_table[] = {
 	[TCM_NO_SENSE] = {
 		.key = NOT_READY
 	},
@@ -3261,39 +3261,39 @@ static const struct sense_info sense_info_table[] = {
  */
 static void translate_sense_reason(struct se_cmd *cmd, sense_reason_t reason)
 {
-	const struct sense_info *si;
+	const struct sense_detail *sd;
 	u8 *buffer = cmd->sense_buffer;
 	int r = (__force int)reason;
 	u8 key, asc, ascq;
 	bool desc_format = target_sense_desc_format(cmd->se_dev);
 
-	if (r < ARRAY_SIZE(sense_info_table) && sense_info_table[r].key)
-		si = &sense_info_table[r];
+	if (r < ARRAY_SIZE(sense_detail_table) && sense_detail_table[r].key)
+		sd = &sense_detail_table[r];
 	else
-		si = &sense_info_table[(__force int)
+		sd = &sense_detail_table[(__force int)
 				       TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE];
 
-	key = si->key;
+	key = sd->key;
 	if (reason = TCM_CHECK_CONDITION_UNIT_ATTENTION) {
 		if (!core_scsi3_ua_for_check_condition(cmd, &key, &asc,
 						       &ascq)) {
 			cmd->scsi_status = SAM_STAT_BUSY;
 			return;
 		}
-	} else if (si->asc = 0) {
+	} else if (sd->asc = 0) {
 		WARN_ON_ONCE(cmd->scsi_asc = 0);
 		asc = cmd->scsi_asc;
 		ascq = cmd->scsi_ascq;
 	} else {
-		asc = si->asc;
-		ascq = si->ascq;
+		asc = sd->asc;
+		ascq = sd->ascq;
 	}
 
 	cmd->se_cmd_flags |= SCF_EMULATED_TASK_SENSE;
 	cmd->scsi_status = SAM_STAT_CHECK_CONDITION;
 	cmd->scsi_sense_length  = TRANSPORT_SENSE_BUFFER;
 	scsi_build_sense_buffer(desc_format, buffer, key, asc, ascq);
-	if (si->add_sector_info)
+	if (sd->add_sector_info)
 		WARN_ON_ONCE(scsi_set_sense_information(buffer,
 							cmd->scsi_sense_length,
 							cmd->bad_sector) < 0);
-- 
2.26.2

[PATCH v2 3/5] scsi: target: rename cmd.bad_sector to cmd.sense_info

[David Disseldorp]

cmd.bad_sector currently gets packed into the sense INFORMATION field
for TCM_LOGICAL_BLOCK_{GUARD,APP_TAG,REF_TAG}_CHECK_FAILED errors, which
carry an .add_sector_info flag in the sense_detail_table to ensure this.

In preparation for propagating a byte offset on COMPARE AND WRITE
TCM_MISCOMPARE_VERIFY error, rename cmd.bad_sector to cmd.sense_info
and sense_detail.add_sector_info to sense_detail.add_sense_info so
that it better reflects the sense INFORMATION field destination.

Signed-off-by: David Disseldorp <ddiss@suse.de>
---
 drivers/target/target_core_sbc.c       |  2 +-
 drivers/target/target_core_transport.c | 12 ++++++------
 include/target/target_core_base.h      |  2 +-
 3 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/target/target_core_sbc.c b/drivers/target/target_core_sbc.c
index 6e8b8d30938f..5f77dd95f1b9 100644
--- a/drivers/target/target_core_sbc.c
+++ b/drivers/target/target_core_sbc.c
@@ -1439,7 +1439,7 @@ sbc_dif_verify(struct se_cmd *cmd, sector_t start, unsigned int sectors,
 			if (rc) {
 				kunmap_atomic(daddr - dsg->offset);
 				kunmap_atomic(paddr - psg->offset);
-				cmd->bad_sector = sector;
+				cmd->sense_info = sector;
 				return rc;
 			}
 next:
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index caa3a7b34826..c6f45c12d564 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -3098,7 +3098,7 @@ struct sense_detail {
 	u8 key;
 	u8 asc;
 	u8 ascq;
-	bool add_sector_info;
+	bool add_sense_info;
 };
 
 static const struct sense_detail sense_detail_table[] = {
@@ -3201,19 +3201,19 @@ static const struct sense_detail sense_detail_table[] = {
 		.key = ABORTED_COMMAND,
 		.asc = 0x10,
 		.ascq = 0x01, /* LOGICAL BLOCK GUARD CHECK FAILED */
-		.add_sector_info = true,
+		.add_sense_info = true,
 	},
 	[TCM_LOGICAL_BLOCK_APP_TAG_CHECK_FAILED] = {
 		.key = ABORTED_COMMAND,
 		.asc = 0x10,
 		.ascq = 0x02, /* LOGICAL BLOCK APPLICATION TAG CHECK FAILED */
-		.add_sector_info = true,
+		.add_sense_info = true,
 	},
 	[TCM_LOGICAL_BLOCK_REF_TAG_CHECK_FAILED] = {
 		.key = ABORTED_COMMAND,
 		.asc = 0x10,
 		.ascq = 0x03, /* LOGICAL BLOCK REFERENCE TAG CHECK FAILED */
-		.add_sector_info = true,
+		.add_sense_info = true,
 	},
 	[TCM_COPY_TARGET_DEVICE_NOT_REACHABLE] = {
 		.key = COPY_ABORTED,
@@ -3293,10 +3293,10 @@ static void translate_sense_reason(struct se_cmd *cmd, sense_reason_t reason)
 	cmd->scsi_status = SAM_STAT_CHECK_CONDITION;
 	cmd->scsi_sense_length  = TRANSPORT_SENSE_BUFFER;
 	scsi_build_sense_buffer(desc_format, buffer, key, asc, ascq);
-	if (sd->add_sector_info)
+	if (sd->add_sense_info)
 		WARN_ON_ONCE(scsi_set_sense_information(buffer,
 							cmd->scsi_sense_length,
-							cmd->bad_sector) < 0);
+							cmd->sense_info) < 0);
 }
 
 int
diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h
index 549947d407cf..7ee2bee46b3a 100644
--- a/include/target/target_core_base.h
+++ b/include/target/target_core_base.h
@@ -540,7 +540,7 @@ struct se_cmd {
 	struct scatterlist	*t_prot_sg;
 	unsigned int		t_prot_nents;
 	sense_reason_t		pi_err;
-	sector_t		bad_sector;
+	u64			sense_info;
 	int			cpuid;
 };
 
-- 
2.26.2

[PATCH v2 3/5] scsi: target: rename cmd.bad_sector to cmd.sense_info

[David Disseldorp]

cmd.bad_sector currently gets packed into the sense INFORMATION field
for TCM_LOGICAL_BLOCK_{GUARD,APP_TAG,REF_TAG}_CHECK_FAILED errors, which
carry an .add_sector_info flag in the sense_detail_table to ensure this.

In preparation for propagating a byte offset on COMPARE AND WRITE
TCM_MISCOMPARE_VERIFY error, rename cmd.bad_sector to cmd.sense_info
and sense_detail.add_sector_info to sense_detail.add_sense_info so
that it better reflects the sense INFORMATION field destination.

Signed-off-by: David Disseldorp <ddiss@suse.de>
---
 drivers/target/target_core_sbc.c       |  2 +-
 drivers/target/target_core_transport.c | 12 ++++++------
 include/target/target_core_base.h      |  2 +-
 3 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/target/target_core_sbc.c b/drivers/target/target_core_sbc.c
index 6e8b8d30938f..5f77dd95f1b9 100644
--- a/drivers/target/target_core_sbc.c
+++ b/drivers/target/target_core_sbc.c
@@ -1439,7 +1439,7 @@ sbc_dif_verify(struct se_cmd *cmd, sector_t start, unsigned int sectors,
 			if (rc) {
 				kunmap_atomic(daddr - dsg->offset);
 				kunmap_atomic(paddr - psg->offset);
-				cmd->bad_sector = sector;
+				cmd->sense_info = sector;
 				return rc;
 			}
 next:
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index caa3a7b34826..c6f45c12d564 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -3098,7 +3098,7 @@ struct sense_detail {
 	u8 key;
 	u8 asc;
 	u8 ascq;
-	bool add_sector_info;
+	bool add_sense_info;
 };
 
 static const struct sense_detail sense_detail_table[] = {
@@ -3201,19 +3201,19 @@ static const struct sense_detail sense_detail_table[] = {
 		.key = ABORTED_COMMAND,
 		.asc = 0x10,
 		.ascq = 0x01, /* LOGICAL BLOCK GUARD CHECK FAILED */
-		.add_sector_info = true,
+		.add_sense_info = true,
 	},
 	[TCM_LOGICAL_BLOCK_APP_TAG_CHECK_FAILED] = {
 		.key = ABORTED_COMMAND,
 		.asc = 0x10,
 		.ascq = 0x02, /* LOGICAL BLOCK APPLICATION TAG CHECK FAILED */
-		.add_sector_info = true,
+		.add_sense_info = true,
 	},
 	[TCM_LOGICAL_BLOCK_REF_TAG_CHECK_FAILED] = {
 		.key = ABORTED_COMMAND,
 		.asc = 0x10,
 		.ascq = 0x03, /* LOGICAL BLOCK REFERENCE TAG CHECK FAILED */
-		.add_sector_info = true,
+		.add_sense_info = true,
 	},
 	[TCM_COPY_TARGET_DEVICE_NOT_REACHABLE] = {
 		.key = COPY_ABORTED,
@@ -3293,10 +3293,10 @@ static void translate_sense_reason(struct se_cmd *cmd, sense_reason_t reason)
 	cmd->scsi_status = SAM_STAT_CHECK_CONDITION;
 	cmd->scsi_sense_length  = TRANSPORT_SENSE_BUFFER;
 	scsi_build_sense_buffer(desc_format, buffer, key, asc, ascq);
-	if (sd->add_sector_info)
+	if (sd->add_sense_info)
 		WARN_ON_ONCE(scsi_set_sense_information(buffer,
 							cmd->scsi_sense_length,
-							cmd->bad_sector) < 0);
+							cmd->sense_info) < 0);
 }
 
 int
diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h
index 549947d407cf..7ee2bee46b3a 100644
--- a/include/target/target_core_base.h
+++ b/include/target/target_core_base.h
@@ -540,7 +540,7 @@ struct se_cmd {
 	struct scatterlist	*t_prot_sg;
 	unsigned int		t_prot_nents;
 	sense_reason_t		pi_err;
-	sector_t		bad_sector;
+	u64			sense_info;
 	int			cpuid;
 };
 
-- 
2.26.2

[PATCH v2 4/5] scsi: target: split out COMPARE AND WRITE memcmp into helper

[David Disseldorp]

In preparation for finding and returning the miscompare offset.

Signed-off-by: David Disseldorp <ddiss@suse.de>
---
 drivers/target/target_core_sbc.c | 121 +++++++++++++++++--------------
 1 file changed, 68 insertions(+), 53 deletions(-)

diff --git a/drivers/target/target_core_sbc.c b/drivers/target/target_core_sbc.c
index 5f77dd95f1b9..22d0cbba6ff3 100644
--- a/drivers/target/target_core_sbc.c
+++ b/drivers/target/target_core_sbc.c
@@ -434,20 +434,75 @@ static sense_reason_t compare_and_write_post(struct se_cmd *cmd, bool success,
 	return ret;
 }
 
+/*
+ * compare @cmp_len bytes of @read_sgl with @cmp_sgl. On miscompare return
+ * TCM_MISCOMPARE_VERIFY.
+ */
+static sense_reason_t
+compare_and_write_do_cmp(struct scatterlist *read_sgl, unsigned int read_nents,
+			 struct scatterlist *cmp_sgl, unsigned int cmp_nents,
+			 unsigned int cmp_len)
+{
+	unsigned char *buf = NULL;
+	struct scatterlist *sg;
+	sense_reason_t ret;
+	unsigned int offset;
+	size_t rc;
+	int i;
+
+	buf = kzalloc(cmp_len, GFP_KERNEL);
+	if (!buf) {
+		ret = TCM_OUT_OF_RESOURCES;
+		goto out;
+	}
+
+	rc = sg_copy_to_buffer(cmp_sgl, cmp_nents, buf, cmp_len);
+	if (!rc) {
+		pr_err("sg_copy_to_buffer() failed for compare_and_write\n");
+		ret = TCM_OUT_OF_RESOURCES;
+		goto out;
+	}
+	/*
+	 * Compare SCSI READ payload against verify payload
+	 */
+	offset = 0;
+	for_each_sg(read_sgl, sg, read_nents, i) {
+		unsigned int len = min(sg->length, cmp_len);
+		unsigned char *addr = kmap_atomic(sg_page(sg));
+
+		if (memcmp(addr, buf + offset, len)) {
+			pr_warn("Detected MISCOMPARE for addr: %p buf: %p\n",
+				addr, buf + offset);
+			kunmap_atomic(addr);
+			ret = TCM_MISCOMPARE_VERIFY;
+			goto out;
+		}
+		kunmap_atomic(addr);
+
+		offset += len;
+		cmp_len -= len;
+		if (!cmp_len)
+			break;
+	}
+	pr_debug("COMPARE AND WRITE read data matches compare data\n");
+	ret = TCM_NO_SENSE;
+out:
+	kfree(buf);
+	return ret;
+}
+
 static sense_reason_t compare_and_write_callback(struct se_cmd *cmd, bool success,
 						 int *post_ret)
 {
 	struct se_device *dev = cmd->se_dev;
 	struct sg_table write_tbl = { };
-	struct scatterlist *write_sg, *sg;
-	unsigned char *buf = NULL, *addr;
+	struct scatterlist *write_sg;
 	struct sg_mapping_iter m;
-	unsigned int offset = 0, len;
-	unsigned int nlbas = cmd->t_task_nolb;
+	unsigned int len;
 	unsigned int block_size = dev->dev_attrib.block_size;
-	unsigned int compare_len = (nlbas * block_size);
+	unsigned int compare_len = (cmd->t_task_nolb * block_size);
 	sense_reason_t ret = TCM_NO_SENSE;
-	int rc, i;
+	int i;
 
 	/*
 	 * Handle early failure in transport_generic_request_failure(),
@@ -473,12 +528,13 @@ static sense_reason_t compare_and_write_callback(struct se_cmd *cmd, bool succes
 		goto out;
 	}
 
-	buf = kzalloc(cmd->data_length, GFP_KERNEL);
-	if (!buf) {
-		pr_err("Unable to allocate compare_and_write buf\n");
-		ret = TCM_OUT_OF_RESOURCES;
+	ret = compare_and_write_do_cmp(cmd->t_bidi_data_sg,
+				       cmd->t_bidi_data_nents,
+				       cmd->t_data_sg,
+				       cmd->t_data_nents,
+				       compare_len);
+	if (ret)
 		goto out;
-	}
 
 	if (sg_alloc_table(&write_tbl, cmd->t_data_nents, GFP_KERNEL) < 0) {
 		pr_err("Unable to allocate compare_and_write sg\n");
@@ -486,44 +542,9 @@ static sense_reason_t compare_and_write_callback(struct se_cmd *cmd, bool succes
 		goto out;
 	}
 	write_sg = write_tbl.sgl;
-	/*
-	 * Setup verify and write data payloads from total NumberLBAs.
-	 */
-	rc = sg_copy_to_buffer(cmd->t_data_sg, cmd->t_data_nents, buf,
-			       cmd->data_length);
-	if (!rc) {
-		pr_err("sg_copy_to_buffer() failed for compare_and_write\n");
-		ret = TCM_OUT_OF_RESOURCES;
-		goto out;
-	}
-	/*
-	 * Compare against SCSI READ payload against verify payload
-	 */
-	for_each_sg(cmd->t_bidi_data_sg, sg, cmd->t_bidi_data_nents, i) {
-		addr = (unsigned char *)kmap_atomic(sg_page(sg));
-		if (!addr) {
-			ret = TCM_OUT_OF_RESOURCES;
-			goto out;
-		}
-
-		len = min(sg->length, compare_len);
-
-		if (memcmp(addr, buf + offset, len)) {
-			pr_warn("Detected MISCOMPARE for addr: %p buf: %p\n",
-				addr, buf + offset);
-			kunmap_atomic(addr);
-			goto miscompare;
-		}
-		kunmap_atomic(addr);
-
-		offset += len;
-		compare_len -= len;
-		if (!compare_len)
-			break;
-	}
 
 	i = 0;
-	len = cmd->t_task_nolb * block_size;
+	len = compare_len;
 	sg_miter_start(&m, cmd->t_data_sg, cmd->t_data_nents, SG_MITER_TO_SG);
 	/*
 	 * Currently assumes NoLB=1 and SGLs are PAGE_SIZE..
@@ -568,13 +589,8 @@ static sense_reason_t compare_and_write_callback(struct se_cmd *cmd, bool succes
 
 	__target_execute_cmd(cmd, false);
 
-	kfree(buf);
 	return ret;
 
-miscompare:
-	pr_warn("Target/%s: Send MISCOMPARE check condition and sense\n",
-		dev->transport->name);
-	ret = TCM_MISCOMPARE_VERIFY;
 out:
 	/*
 	 * In the MISCOMPARE or failure case, unlock ->caw_sem obtained in
@@ -582,7 +598,6 @@ static sense_reason_t compare_and_write_callback(struct se_cmd *cmd, bool succes
 	 */
 	up(&dev->caw_sem);
 	sg_free_table(&write_tbl);
-	kfree(buf);
 	return ret;
 }
 
-- 
2.26.2

[PATCH v2 4/5] scsi: target: split out COMPARE AND WRITE memcmp into helper

[David Disseldorp]

In preparation for finding and returning the miscompare offset.

Signed-off-by: David Disseldorp <ddiss@suse.de>
---
 drivers/target/target_core_sbc.c | 121 +++++++++++++++++--------------
 1 file changed, 68 insertions(+), 53 deletions(-)

diff --git a/drivers/target/target_core_sbc.c b/drivers/target/target_core_sbc.c
index 5f77dd95f1b9..22d0cbba6ff3 100644
--- a/drivers/target/target_core_sbc.c
+++ b/drivers/target/target_core_sbc.c
@@ -434,20 +434,75 @@ static sense_reason_t compare_and_write_post(struct se_cmd *cmd, bool success,
 	return ret;
 }
 
+/*
+ * compare @cmp_len bytes of @read_sgl with @cmp_sgl. On miscompare return
+ * TCM_MISCOMPARE_VERIFY.
+ */
+static sense_reason_t
+compare_and_write_do_cmp(struct scatterlist *read_sgl, unsigned int read_nents,
+			 struct scatterlist *cmp_sgl, unsigned int cmp_nents,
+			 unsigned int cmp_len)
+{
+	unsigned char *buf = NULL;
+	struct scatterlist *sg;
+	sense_reason_t ret;
+	unsigned int offset;
+	size_t rc;
+	int i;
+
+	buf = kzalloc(cmp_len, GFP_KERNEL);
+	if (!buf) {
+		ret = TCM_OUT_OF_RESOURCES;
+		goto out;
+	}
+
+	rc = sg_copy_to_buffer(cmp_sgl, cmp_nents, buf, cmp_len);
+	if (!rc) {
+		pr_err("sg_copy_to_buffer() failed for compare_and_write\n");
+		ret = TCM_OUT_OF_RESOURCES;
+		goto out;
+	}
+	/*
+	 * Compare SCSI READ payload against verify payload
+	 */
+	offset = 0;
+	for_each_sg(read_sgl, sg, read_nents, i) {
+		unsigned int len = min(sg->length, cmp_len);
+		unsigned char *addr = kmap_atomic(sg_page(sg));
+
+		if (memcmp(addr, buf + offset, len)) {
+			pr_warn("Detected MISCOMPARE for addr: %p buf: %p\n",
+				addr, buf + offset);
+			kunmap_atomic(addr);
+			ret = TCM_MISCOMPARE_VERIFY;
+			goto out;
+		}
+		kunmap_atomic(addr);
+
+		offset += len;
+		cmp_len -= len;
+		if (!cmp_len)
+			break;
+	}
+	pr_debug("COMPARE AND WRITE read data matches compare data\n");
+	ret = TCM_NO_SENSE;
+out:
+	kfree(buf);
+	return ret;
+}
+
 static sense_reason_t compare_and_write_callback(struct se_cmd *cmd, bool success,
 						 int *post_ret)
 {
 	struct se_device *dev = cmd->se_dev;
 	struct sg_table write_tbl = { };
-	struct scatterlist *write_sg, *sg;
-	unsigned char *buf = NULL, *addr;
+	struct scatterlist *write_sg;
 	struct sg_mapping_iter m;
-	unsigned int offset = 0, len;
-	unsigned int nlbas = cmd->t_task_nolb;
+	unsigned int len;
 	unsigned int block_size = dev->dev_attrib.block_size;
-	unsigned int compare_len = (nlbas * block_size);
+	unsigned int compare_len = (cmd->t_task_nolb * block_size);
 	sense_reason_t ret = TCM_NO_SENSE;
-	int rc, i;
+	int i;
 
 	/*
 	 * Handle early failure in transport_generic_request_failure(),
@@ -473,12 +528,13 @@ static sense_reason_t compare_and_write_callback(struct se_cmd *cmd, bool succes
 		goto out;
 	}
 
-	buf = kzalloc(cmd->data_length, GFP_KERNEL);
-	if (!buf) {
-		pr_err("Unable to allocate compare_and_write buf\n");
-		ret = TCM_OUT_OF_RESOURCES;
+	ret = compare_and_write_do_cmp(cmd->t_bidi_data_sg,
+				       cmd->t_bidi_data_nents,
+				       cmd->t_data_sg,
+				       cmd->t_data_nents,
+				       compare_len);
+	if (ret)
 		goto out;
-	}
 
 	if (sg_alloc_table(&write_tbl, cmd->t_data_nents, GFP_KERNEL) < 0) {
 		pr_err("Unable to allocate compare_and_write sg\n");
@@ -486,44 +542,9 @@ static sense_reason_t compare_and_write_callback(struct se_cmd *cmd, bool succes
 		goto out;
 	}
 	write_sg = write_tbl.sgl;
-	/*
-	 * Setup verify and write data payloads from total NumberLBAs.
-	 */
-	rc = sg_copy_to_buffer(cmd->t_data_sg, cmd->t_data_nents, buf,
-			       cmd->data_length);
-	if (!rc) {
-		pr_err("sg_copy_to_buffer() failed for compare_and_write\n");
-		ret = TCM_OUT_OF_RESOURCES;
-		goto out;
-	}
-	/*
-	 * Compare against SCSI READ payload against verify payload
-	 */
-	for_each_sg(cmd->t_bidi_data_sg, sg, cmd->t_bidi_data_nents, i) {
-		addr = (unsigned char *)kmap_atomic(sg_page(sg));
-		if (!addr) {
-			ret = TCM_OUT_OF_RESOURCES;
-			goto out;
-		}
-
-		len = min(sg->length, compare_len);
-
-		if (memcmp(addr, buf + offset, len)) {
-			pr_warn("Detected MISCOMPARE for addr: %p buf: %p\n",
-				addr, buf + offset);
-			kunmap_atomic(addr);
-			goto miscompare;
-		}
-		kunmap_atomic(addr);
-
-		offset += len;
-		compare_len -= len;
-		if (!compare_len)
-			break;
-	}
 
 	i = 0;
-	len = cmd->t_task_nolb * block_size;
+	len = compare_len;
 	sg_miter_start(&m, cmd->t_data_sg, cmd->t_data_nents, SG_MITER_TO_SG);
 	/*
 	 * Currently assumes NoLB=1 and SGLs are PAGE_SIZE..
@@ -568,13 +589,8 @@ static sense_reason_t compare_and_write_callback(struct se_cmd *cmd, bool succes
 
 	__target_execute_cmd(cmd, false);
 
-	kfree(buf);
 	return ret;
 
-miscompare:
-	pr_warn("Target/%s: Send MISCOMPARE check condition and sense\n",
-		dev->transport->name);
-	ret = TCM_MISCOMPARE_VERIFY;
 out:
 	/*
 	 * In the MISCOMPARE or failure case, unlock ->caw_sem obtained in
@@ -582,7 +598,6 @@ static sense_reason_t compare_and_write_callback(struct se_cmd *cmd, bool succes
 	 */
 	up(&dev->caw_sem);
 	sg_free_table(&write_tbl);
-	kfree(buf);
 	return ret;
 }
 
-- 
2.26.2

[PATCH v2 5/5] scsi: target: return COMPARE AND WRITE miscompare offsets

[David Disseldorp]

SBC-4 r15 5.3 COMPARE AND WRITE command states:
  if the compare operation does not indicate a match, then terminate the
  command with CHECK CONDITION status with the sense key set to
  MISCOMPARE and the additional sense code set to MISCOMPARE DURING
  VERIFY OPERATION. In the sense data (see 4.18 and SPC-5) the offset
  from the start of the Data-Out Buffer to the first byte of data that
  was not equal shall be reported in the INFORMATION field.

This change implements the missing logic to report the miscompare offset
in the sense data INFORMATION field.

Signed-off-by: David Disseldorp <ddiss@suse.de>
---
 drivers/target/target_core_sbc.c       | 34 ++++++++++++++++++--------
 drivers/target/target_core_transport.c |  1 +
 2 files changed, 25 insertions(+), 10 deletions(-)

diff --git a/drivers/target/target_core_sbc.c b/drivers/target/target_core_sbc.c
index 22d0cbba6ff3..0fa52a98d6cf 100644
--- a/drivers/target/target_core_sbc.c
+++ b/drivers/target/target_core_sbc.c
@@ -435,13 +435,13 @@ static sense_reason_t compare_and_write_post(struct se_cmd *cmd, bool success,
 }
 
 /*
- * compare @cmp_len bytes of @read_sgl with @cmp_sgl. On miscompare return
- * TCM_MISCOMPARE_VERIFY.
+ * compare @cmp_len bytes of @read_sgl with @cmp_sgl. On miscompare, fill
+ * @miscmp_off and return TCM_MISCOMPARE_VERIFY.
  */
 static sense_reason_t
 compare_and_write_do_cmp(struct scatterlist *read_sgl, unsigned int read_nents,
 			 struct scatterlist *cmp_sgl, unsigned int cmp_nents,
-			 unsigned int cmp_len)
+			 unsigned int cmp_len, unsigned int *miscmp_off)
 {
 	unsigned char *buf = NULL;
 	struct scatterlist *sg;
@@ -467,17 +467,20 @@ compare_and_write_do_cmp(struct scatterlist *read_sgl, unsigned int read_nents,
 	 */
 	offset = 0;
 	for_each_sg(read_sgl, sg, read_nents, i) {
+		unsigned int i;
 		unsigned int len = min(sg->length, cmp_len);
 		unsigned char *addr = kmap_atomic(sg_page(sg));
 
-		if (memcmp(addr, buf + offset, len)) {
-			pr_warn("Detected MISCOMPARE for addr: %p buf: %p\n",
-				addr, buf + offset);
-			kunmap_atomic(addr);
+		for (i = 0; i < len && addr[i] == buf[offset + i]; i++)
+			;
+		kunmap_atomic(addr);
+		if (i < len) {
+			*miscmp_off = offset + i;
+			pr_warn("Detected MISCOMPARE at offset %u\n",
+				*miscmp_off);
 			ret = TCM_MISCOMPARE_VERIFY;
 			goto out;
 		}
-		kunmap_atomic(addr);
 
 		offset += len;
 		cmp_len -= len;
@@ -501,6 +504,7 @@ static sense_reason_t compare_and_write_callback(struct se_cmd *cmd, bool succes
 	unsigned int len;
 	unsigned int block_size = dev->dev_attrib.block_size;
 	unsigned int compare_len = (cmd->t_task_nolb * block_size);
+	unsigned int miscmp_off = 0;
 	sense_reason_t ret = TCM_NO_SENSE;
 	int i;
 
@@ -532,8 +536,18 @@ static sense_reason_t compare_and_write_callback(struct se_cmd *cmd, bool succes
 				       cmd->t_bidi_data_nents,
 				       cmd->t_data_sg,
 				       cmd->t_data_nents,
-				       compare_len);
-	if (ret)
+				       compare_len,
+				       &miscmp_off);
+	if (ret == TCM_MISCOMPARE_VERIFY) {
+		/*
+		 * SBC-4 r15: 5.3 COMPARE AND WRITE command
+		 * In the sense data (see 4.18 and SPC-5) the offset from the
+		 * start of the Data-Out Buffer to the first byte of data that
+		 * was not equal shall be reported in the INFORMATION field.
+		 */
+		cmd->sense_info = miscmp_off;
+		goto out;
+	} else if (ret)
 		goto out;
 
 	if (sg_alloc_table(&write_tbl, cmd->t_data_nents, GFP_KERNEL) < 0) {
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index c6f45c12d564..693ed3fe4388 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -3196,6 +3196,7 @@ static const struct sense_detail sense_detail_table[] = {
 		.key = MISCOMPARE,
 		.asc = 0x1d, /* MISCOMPARE DURING VERIFY OPERATION */
 		.ascq = 0x00,
+		.add_sense_info = true,
 	},
 	[TCM_LOGICAL_BLOCK_GUARD_CHECK_FAILED] = {
 		.key = ABORTED_COMMAND,
-- 
2.26.2

[PATCH v2 5/5] scsi: target: return COMPARE AND WRITE miscompare offsets

[David Disseldorp]

SBC-4 r15 5.3 COMPARE AND WRITE command states:
  if the compare operation does not indicate a match, then terminate the
  command with CHECK CONDITION status with the sense key set to
  MISCOMPARE and the additional sense code set to MISCOMPARE DURING
  VERIFY OPERATION. In the sense data (see 4.18 and SPC-5) the offset
  from the start of the Data-Out Buffer to the first byte of data that
  was not equal shall be reported in the INFORMATION field.

This change implements the missing logic to report the miscompare offset
in the sense data INFORMATION field.

Signed-off-by: David Disseldorp <ddiss@suse.de>
---
 drivers/target/target_core_sbc.c       | 34 ++++++++++++++++++--------
 drivers/target/target_core_transport.c |  1 +
 2 files changed, 25 insertions(+), 10 deletions(-)

diff --git a/drivers/target/target_core_sbc.c b/drivers/target/target_core_sbc.c
index 22d0cbba6ff3..0fa52a98d6cf 100644
--- a/drivers/target/target_core_sbc.c
+++ b/drivers/target/target_core_sbc.c
@@ -435,13 +435,13 @@ static sense_reason_t compare_and_write_post(struct se_cmd *cmd, bool success,
 }
 
 /*
- * compare @cmp_len bytes of @read_sgl with @cmp_sgl. On miscompare return
- * TCM_MISCOMPARE_VERIFY.
+ * compare @cmp_len bytes of @read_sgl with @cmp_sgl. On miscompare, fill
+ * @miscmp_off and return TCM_MISCOMPARE_VERIFY.
  */
 static sense_reason_t
 compare_and_write_do_cmp(struct scatterlist *read_sgl, unsigned int read_nents,
 			 struct scatterlist *cmp_sgl, unsigned int cmp_nents,
-			 unsigned int cmp_len)
+			 unsigned int cmp_len, unsigned int *miscmp_off)
 {
 	unsigned char *buf = NULL;
 	struct scatterlist *sg;
@@ -467,17 +467,20 @@ compare_and_write_do_cmp(struct scatterlist *read_sgl, unsigned int read_nents,
 	 */
 	offset = 0;
 	for_each_sg(read_sgl, sg, read_nents, i) {
+		unsigned int i;
 		unsigned int len = min(sg->length, cmp_len);
 		unsigned char *addr = kmap_atomic(sg_page(sg));
 
-		if (memcmp(addr, buf + offset, len)) {
-			pr_warn("Detected MISCOMPARE for addr: %p buf: %p\n",
-				addr, buf + offset);
-			kunmap_atomic(addr);
+		for (i = 0; i < len && addr[i] = buf[offset + i]; i++)
+			;
+		kunmap_atomic(addr);
+		if (i < len) {
+			*miscmp_off = offset + i;
+			pr_warn("Detected MISCOMPARE at offset %u\n",
+				*miscmp_off);
 			ret = TCM_MISCOMPARE_VERIFY;
 			goto out;
 		}
-		kunmap_atomic(addr);
 
 		offset += len;
 		cmp_len -= len;
@@ -501,6 +504,7 @@ static sense_reason_t compare_and_write_callback(struct se_cmd *cmd, bool succes
 	unsigned int len;
 	unsigned int block_size = dev->dev_attrib.block_size;
 	unsigned int compare_len = (cmd->t_task_nolb * block_size);
+	unsigned int miscmp_off = 0;
 	sense_reason_t ret = TCM_NO_SENSE;
 	int i;
 
@@ -532,8 +536,18 @@ static sense_reason_t compare_and_write_callback(struct se_cmd *cmd, bool succes
 				       cmd->t_bidi_data_nents,
 				       cmd->t_data_sg,
 				       cmd->t_data_nents,
-				       compare_len);
-	if (ret)
+				       compare_len,
+				       &miscmp_off);
+	if (ret = TCM_MISCOMPARE_VERIFY) {
+		/*
+		 * SBC-4 r15: 5.3 COMPARE AND WRITE command
+		 * In the sense data (see 4.18 and SPC-5) the offset from the
+		 * start of the Data-Out Buffer to the first byte of data that
+		 * was not equal shall be reported in the INFORMATION field.
+		 */
+		cmd->sense_info = miscmp_off;
+		goto out;
+	} else if (ret)
 		goto out;
 
 	if (sg_alloc_table(&write_tbl, cmd->t_data_nents, GFP_KERNEL) < 0) {
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index c6f45c12d564..693ed3fe4388 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -3196,6 +3196,7 @@ static const struct sense_detail sense_detail_table[] = {
 		.key = MISCOMPARE,
 		.asc = 0x1d, /* MISCOMPARE DURING VERIFY OPERATION */
 		.ascq = 0x00,
+		.add_sense_info = true,
 	},
 	[TCM_LOGICAL_BLOCK_GUARD_CHECK_FAILED] = {
 		.key = ABORTED_COMMAND,
-- 
2.26.2

Re: [PATCH v2 0/5] scsi: target: COMPARE AND WRITE miscompare sense

[Mike Christie]

On 10/26/20 2:06 PM, David Disseldorp wrote:
> This patchset adds missing functionality to return the offset of
> non-matching read/compare data in the sense INFORMATION field on
> COMPARE AND WRITE miscompare.
> 
> The functionality can be tested using the libiscsi
> CompareAndWrite.MiscompareSense test proposed via:
>    https://urldefense.com/v3/__https://github.com/sahlberg/libiscsi/pull/344__;!!GqivPVa7Brio!LJ-un7MDdHXhZgIK1qgvDgza2El16FK-T_4oDi6VqM0CzetAV9pGHDvLDrZUkITTHxhO$
> 
> Changes since v1:
> - drop unnecessary WARN_ON()
> - fix two checkpatch warnings
> - drop single-use nlbas variable
> - avoid compare_len recalculation
> 
> Cheers, David
> 
>   drivers/target/target_core_sbc.c       | 137 +++++++++++++++----------
>   drivers/target/target_core_transport.c |  33 +++---
>   include/target/target_core_base.h      |   2 +-
>   lib/scatterlist.c                      |   2 +-
>   4 files changed, 102 insertions(+), 72 deletions(-)


Reviewed-by: Mike Christie <michael.christie@oracle.com>

Re: [PATCH v2 0/5] scsi: target: COMPARE AND WRITE miscompare sense

[Mike Christie]

On 10/26/20 2:06 PM, David Disseldorp wrote:
> This patchset adds missing functionality to return the offset of
> non-matching read/compare data in the sense INFORMATION field on
> COMPARE AND WRITE miscompare.
> 
> The functionality can be tested using the libiscsi
> CompareAndWrite.MiscompareSense test proposed via:
>    https://urldefense.com/v3/__https://github.com/sahlberg/libiscsi/pull/344__;!!GqivPVa7Brio!LJ-un7MDdHXhZgIK1qgvDgza2El16FK-T_4oDi6VqM0CzetAV9pGHDvLDrZUkITTHxhO$
> 
> Changes since v1:
> - drop unnecessary WARN_ON()
> - fix two checkpatch warnings
> - drop single-use nlbas variable
> - avoid compare_len recalculation
> 
> Cheers, David
> 
>   drivers/target/target_core_sbc.c       | 137 +++++++++++++++----------
>   drivers/target/target_core_transport.c |  33 +++---
>   include/target/target_core_base.h      |   2 +-
>   lib/scatterlist.c                      |   2 +-
>   4 files changed, 102 insertions(+), 72 deletions(-)


Reviewed-by: Mike Christie <michael.christie@oracle.com>

Re: [PATCH v2 0/5] scsi: target: COMPARE AND WRITE miscompare sense

[David Disseldorp]

On Tue, 27 Oct 2020 00:49:23 -0500, Mike Christie wrote:

> On 10/26/20 2:06 PM, David Disseldorp wrote:
> > This patchset adds missing functionality to return the offset of
> > non-matching read/compare data in the sense INFORMATION field on
> > COMPARE AND WRITE miscompare.
...
> > Changes since v1:
> > - drop unnecessary WARN_ON()
> > - fix two checkpatch warnings
> > - drop single-use nlbas variable
> > - avoid compare_len recalculation
> > 
> > Cheers, David
> > 
> >   drivers/target/target_core_sbc.c       | 137 +++++++++++++++----------
> >   drivers/target/target_core_transport.c |  33 +++---
> >   include/target/target_core_base.h      |   2 +-
> >   lib/scatterlist.c                      |   2 +-
> >   4 files changed, 102 insertions(+), 72 deletions(-)  
> 
> 
> Reviewed-by: Mike Christie <michael.christie@oracle.com>

Thanks Mike.
@Martin: please pull patches 2/5 through to 5/5 only; the independent
scatterlist patch 1/5 has been submitted via linux-block.

Cheers, David

Re: [PATCH v2 0/5] scsi: target: COMPARE AND WRITE miscompare sense

[David Disseldorp]

On Tue, 27 Oct 2020 00:49:23 -0500, Mike Christie wrote:

> On 10/26/20 2:06 PM, David Disseldorp wrote:
> > This patchset adds missing functionality to return the offset of
> > non-matching read/compare data in the sense INFORMATION field on
> > COMPARE AND WRITE miscompare.
...
> > Changes since v1:
> > - drop unnecessary WARN_ON()
> > - fix two checkpatch warnings
> > - drop single-use nlbas variable
> > - avoid compare_len recalculation
> > 
> > Cheers, David
> > 
> >   drivers/target/target_core_sbc.c       | 137 +++++++++++++++----------
> >   drivers/target/target_core_transport.c |  33 +++---
> >   include/target/target_core_base.h      |   2 +-
> >   lib/scatterlist.c                      |   2 +-
> >   4 files changed, 102 insertions(+), 72 deletions(-)  
> 
> 
> Reviewed-by: Mike Christie <michael.christie@oracle.com>

Thanks Mike.
@Martin: please pull patches 2/5 through to 5/5 only; the independent
scatterlist patch 1/5 has been submitted via linux-block.

Cheers, David

Re: [PATCH v2 0/5] scsi: target: COMPARE AND WRITE miscompare sense

[Martin K. Petersen]

David,

> This patchset adds missing functionality to return the offset of
> non-matching read/compare data in the sense INFORMATION field on
> COMPARE AND WRITE miscompare.

Applied 2-5 to 5.11/scsi-staging, thanks!

-- 
Martin K. Petersen	Oracle Linux Engineering

Re: [PATCH v2 0/5] scsi: target: COMPARE AND WRITE miscompare sense

[Martin K. Petersen]

David,

> This patchset adds missing functionality to return the offset of
> non-matching read/compare data in the sense INFORMATION field on
> COMPARE AND WRITE miscompare.

Applied 2-5 to 5.11/scsi-staging, thanks!

-- 
Martin K. Petersen	Oracle Linux Engineering

Re: [PATCH v2 0/5] scsi: target: COMPARE AND WRITE miscompare sense

[Martin K. Petersen]

>> This patchset adds missing functionality to return the offset of
>> non-matching read/compare data in the sense INFORMATION field on
>> COMPARE AND WRITE miscompare.
>
> Applied 2-5 to 5.11/scsi-staging, thanks!

Dropped again, breaks IB.

-- 
Martin K. Petersen	Oracle Linux Engineering

Re: [PATCH v2 0/5] scsi: target: COMPARE AND WRITE miscompare sense

[Martin K. Petersen]

>> This patchset adds missing functionality to return the offset of
>> non-matching read/compare data in the sense INFORMATION field on
>> COMPARE AND WRITE miscompare.
>
> Applied 2-5 to 5.11/scsi-staging, thanks!

Dropped again, breaks IB.

-- 
Martin K. Petersen	Oracle Linux Engineering

Re: [PATCH v2 0/5] scsi: target: COMPARE AND WRITE miscompare sense

[David Disseldorp]

On Thu, 29 Oct 2020 22:06:00 -0400, Martin K. Petersen wrote:

> >> This patchset adds missing functionality to return the offset of
> >> non-matching read/compare data in the sense INFORMATION field on
> >> COMPARE AND WRITE miscompare.  
> >
> > Applied 2-5 to 5.11/scsi-staging, thanks!  
> 
> Dropped again, breaks IB.
> 

Hmm, I overlooked ib_isert in the bad_sector->sense_info rename, sorry.
I'll post a v3 when done with testing.

Cheers, David

Re: [PATCH v2 0/5] scsi: target: COMPARE AND WRITE miscompare sense

[David Disseldorp]

On Thu, 29 Oct 2020 22:06:00 -0400, Martin K. Petersen wrote:

> >> This patchset adds missing functionality to return the offset of
> >> non-matching read/compare data in the sense INFORMATION field on
> >> COMPARE AND WRITE miscompare.  
> >
> > Applied 2-5 to 5.11/scsi-staging, thanks!  
> 
> Dropped again, breaks IB.
> 

Hmm, I overlooked ib_isert in the bad_sector->sense_info rename, sorry.
I'll post a v3 when done with testing.

Cheers, David