All of lore.kernel.org
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Shengjiu Wang <shengjiu.wang@nxp.com>
Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org,
	timur@kernel.org, Xiubo.Lee@gmail.com, lgirdwood@gmail.com,
	linuxppc-dev@lists.ozlabs.org, tiwai@suse.com,
	robh+dt@kernel.org, nicoleotsuka@gmail.com, broonie@kernel.org,
	festevam@gmail.com, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] ASoC: dt-bindings: fsl_aud2htx: Add binding doc for aud2htx module
Date: Tue, 27 Oct 2020 12:08:40 +0100	[thread overview]
Message-ID: <20201027110840.GA23076@kozik-lap> (raw)
In-Reply-To: <1603708855-2663-1-git-send-email-shengjiu.wang@nxp.com>

On Mon, Oct 26, 2020 at 06:40:54PM +0800, Shengjiu Wang wrote:
> AUD2HTX (Audio Subsystem TO HDMI TX Subsystem) is a new
> IP module found on i.MX8MP.
> 
> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
> ---
>  .../bindings/sound/fsl,aud2htx.yaml           | 67 +++++++++++++++++++
>  1 file changed, 67 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/sound/fsl,aud2htx.yaml
> 
> diff --git a/Documentation/devicetree/bindings/sound/fsl,aud2htx.yaml b/Documentation/devicetree/bindings/sound/fsl,aud2htx.yaml
> new file mode 100644
> index 000000000000..18548d0889a8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/fsl,aud2htx.yaml
> @@ -0,0 +1,67 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/fsl,aud2htx.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP Audio Subsystem to HDMI RTX Subsystem Controller
> +
> +maintainers:
> +  - Shengjiu Wang <shengjiu.wang@nxp.com>
> +
> +properties:
> +  $nodename:
> +    pattern: "^aud2htx@.*"

aud2htx is not a generic class of a device so it should not be enforced.

> +
> +  compatible:
> +    const: fsl,imx8mp-aud2htx
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: Peripheral clock
> +
> +  clock-names:
> +    items:
> +      - const: bus
> +
> +  dmas:
> +    items:
> +      - description: DMA controller phandle and request line for TX
> +
> +  dma-names:
> +    items:
> +      - const: tx
> +
> +  power-domains:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - dmas
> +  - dma-names
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/imx8mp-clock.h>
> +
> +    aud2htx: aud2htx@30cb0000 {
> +             compatible = "fsl,imx8mp-aud2htx";

Wrong indentation. Most of examples are indented with 4 spaces.

Best regards,
Krzysztof

WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Shengjiu Wang <shengjiu.wang@nxp.com>
Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org,
	timur@kernel.org, Xiubo.Lee@gmail.com, lgirdwood@gmail.com,
	linuxppc-dev@lists.ozlabs.org, tiwai@suse.com,
	robh+dt@kernel.org, perex@perex.cz, nicoleotsuka@gmail.com,
	broonie@kernel.org, festevam@gmail.com,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] ASoC: dt-bindings: fsl_aud2htx: Add binding doc for aud2htx module
Date: Tue, 27 Oct 2020 12:08:40 +0100	[thread overview]
Message-ID: <20201027110840.GA23076@kozik-lap> (raw)
In-Reply-To: <1603708855-2663-1-git-send-email-shengjiu.wang@nxp.com>

On Mon, Oct 26, 2020 at 06:40:54PM +0800, Shengjiu Wang wrote:
> AUD2HTX (Audio Subsystem TO HDMI TX Subsystem) is a new
> IP module found on i.MX8MP.
> 
> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
> ---
>  .../bindings/sound/fsl,aud2htx.yaml           | 67 +++++++++++++++++++
>  1 file changed, 67 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/sound/fsl,aud2htx.yaml
> 
> diff --git a/Documentation/devicetree/bindings/sound/fsl,aud2htx.yaml b/Documentation/devicetree/bindings/sound/fsl,aud2htx.yaml
> new file mode 100644
> index 000000000000..18548d0889a8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/fsl,aud2htx.yaml
> @@ -0,0 +1,67 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/fsl,aud2htx.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP Audio Subsystem to HDMI RTX Subsystem Controller
> +
> +maintainers:
> +  - Shengjiu Wang <shengjiu.wang@nxp.com>
> +
> +properties:
> +  $nodename:
> +    pattern: "^aud2htx@.*"

aud2htx is not a generic class of a device so it should not be enforced.

> +
> +  compatible:
> +    const: fsl,imx8mp-aud2htx
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: Peripheral clock
> +
> +  clock-names:
> +    items:
> +      - const: bus
> +
> +  dmas:
> +    items:
> +      - description: DMA controller phandle and request line for TX
> +
> +  dma-names:
> +    items:
> +      - const: tx
> +
> +  power-domains:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - dmas
> +  - dma-names
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/imx8mp-clock.h>
> +
> +    aud2htx: aud2htx@30cb0000 {
> +             compatible = "fsl,imx8mp-aud2htx";

Wrong indentation. Most of examples are indented with 4 spaces.

Best regards,
Krzysztof

WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Shengjiu Wang <shengjiu.wang@nxp.com>
Cc: timur@kernel.org, nicoleotsuka@gmail.com, Xiubo.Lee@gmail.com,
	festevam@gmail.com, broonie@kernel.org, perex@perex.cz,
	tiwai@suse.com, alsa-devel@alsa-project.org, lgirdwood@gmail.com,
	robh+dt@kernel.org, devicetree@vger.kernel.org,
	linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] ASoC: dt-bindings: fsl_aud2htx: Add binding doc for aud2htx module
Date: Tue, 27 Oct 2020 12:08:40 +0100	[thread overview]
Message-ID: <20201027110840.GA23076@kozik-lap> (raw)
In-Reply-To: <1603708855-2663-1-git-send-email-shengjiu.wang@nxp.com>

On Mon, Oct 26, 2020 at 06:40:54PM +0800, Shengjiu Wang wrote:
> AUD2HTX (Audio Subsystem TO HDMI TX Subsystem) is a new
> IP module found on i.MX8MP.
> 
> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
> ---
>  .../bindings/sound/fsl,aud2htx.yaml           | 67 +++++++++++++++++++
>  1 file changed, 67 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/sound/fsl,aud2htx.yaml
> 
> diff --git a/Documentation/devicetree/bindings/sound/fsl,aud2htx.yaml b/Documentation/devicetree/bindings/sound/fsl,aud2htx.yaml
> new file mode 100644
> index 000000000000..18548d0889a8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/fsl,aud2htx.yaml
> @@ -0,0 +1,67 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/fsl,aud2htx.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP Audio Subsystem to HDMI RTX Subsystem Controller
> +
> +maintainers:
> +  - Shengjiu Wang <shengjiu.wang@nxp.com>
> +
> +properties:
> +  $nodename:
> +    pattern: "^aud2htx@.*"

aud2htx is not a generic class of a device so it should not be enforced.

> +
> +  compatible:
> +    const: fsl,imx8mp-aud2htx
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: Peripheral clock
> +
> +  clock-names:
> +    items:
> +      - const: bus
> +
> +  dmas:
> +    items:
> +      - description: DMA controller phandle and request line for TX
> +
> +  dma-names:
> +    items:
> +      - const: tx
> +
> +  power-domains:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - dmas
> +  - dma-names
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/imx8mp-clock.h>
> +
> +    aud2htx: aud2htx@30cb0000 {
> +             compatible = "fsl,imx8mp-aud2htx";

Wrong indentation. Most of examples are indented with 4 spaces.

Best regards,
Krzysztof

  parent reply	other threads:[~2020-10-27 11:09 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-26 10:40 [PATCH 1/2] ASoC: dt-bindings: fsl_aud2htx: Add binding doc for aud2htx module Shengjiu Wang
2020-10-26 10:40 ` [PATCH 2/2] ASoC: fsl_aud2htx: Add aud2htx module driver Shengjiu Wang
2020-10-26 13:30   ` Mark Brown
2020-10-26 13:30     ` Mark Brown
2020-10-26 13:30     ` Mark Brown
2020-10-27 13:17     ` Shengjiu Wang
2020-10-27 13:17       ` Shengjiu Wang
2020-10-27 11:08 ` Krzysztof Kozlowski [this message]
2020-10-27 11:08   ` [PATCH 1/2] ASoC: dt-bindings: fsl_aud2htx: Add binding doc for aud2htx module Krzysztof Kozlowski
2020-10-27 11:08   ` Krzysztof Kozlowski
2020-10-28  5:20   ` Shengjiu Wang
2020-10-28  5:20     ` Shengjiu Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201027110840.GA23076@kozik-lap \
    --to=krzk@kernel.org \
    --cc=Xiubo.Lee@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=nicoleotsuka@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=shengjiu.wang@nxp.com \
    --cc=timur@kernel.org \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.