From: Arnd Bergmann <arnd@kernel.org>
To: linux-kernel@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>,
Arnd Bergmann <arnd@arndb.de>,
Russell King <linux@armlinux.org.uk>,
Tony Luck <tony.luck@intel.com>,
Fenghua Yu <fenghua.yu@intel.com>,
Greg Ungerer <gerg@linux-m68k.org>,
Finn Thain <fthain@telegraphics.com.au>,
Philip Blundell <philb@gnu.org>,
Joshua Thompson <funaho@jurai.org>, Sam Creasey <sammy@sammy.net>,
"James E.J. Bottomley" <James.Bottomley@hansenpartnership.com>,
Helge Deller <deller@gmx.de>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
John Stultz <john.stultz@linaro.org>,
Stephen Boyd <sboyd@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
linux-ia64@vger.kernel.org,
Parisc List <linux-parisc@vger.kernel.org>,
linux-m68k <linux-m68k@lists.linux-m68k.org>,
Linux ARM <linux-arm-kernel@lists.infradead.org>
Subject: [PATCH v2 08/15] m68k: coldfire: use legacy_timer_tick()
Date: Fri, 30 Oct 2020 15:17:51 +0000 [thread overview]
Message-ID: <20201030151758.1241164-9-arnd@kernel.org> (raw)
In-Reply-To: <20201030151758.1241164-1-arnd@kernel.org>
From: Arnd Bergmann <arnd@arndb.de>
Replace the indirect function calls in the timer code
with direct calls to the newly added legacy_timer_tick()
helper for those that have not yet been converted to
generic clockevents.
This makes the timer code a little more self-contained.
Tested-by: Greg Ungerer <gerg@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/m68k/Kconfig.cpu | 35 +++++++++++++++++++++++++++++------
arch/m68k/coldfire/Makefile | 32 ++++++++++++++++++--------------
arch/m68k/coldfire/sltimers.c | 6 ++----
arch/m68k/coldfire/timers.c | 6 ++----
4 files changed, 51 insertions(+), 28 deletions(-)
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
index 694c4fca9f5d..322a35ef14c6 100644
--- a/arch/m68k/Kconfig.cpu
+++ b/arch/m68k/Kconfig.cpu
@@ -137,6 +137,7 @@ config M5206
bool "MCF5206"
depends on !MMU
select COLDFIRE_SW_A7
+ select COLDFIRE_TIMERS
select HAVE_MBAR
select CPU_NO_EFFICIENT_FFS
help
@@ -146,6 +147,7 @@ config M5206e
bool "MCF5206e"
depends on !MMU
select COLDFIRE_SW_A7
+ select COLDFIRE_TIMERS
select HAVE_MBAR
select CPU_NO_EFFICIENT_FFS
help
@@ -154,7 +156,7 @@ config M5206e
config M520x
bool "MCF520x"
depends on !MMU
- select GENERIC_CLOCKEVENTS
+ select COLDFIRE_PIT_TIMER
select HAVE_CACHE_SPLIT
help
Freescale Coldfire 5207/5208 processor support.
@@ -162,7 +164,7 @@ config M520x
config M523x
bool "MCF523x"
depends on !MMU
- select GENERIC_CLOCKEVENTS
+ select COLDFIRE_PIT_TIMER
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
help
@@ -172,6 +174,7 @@ config M5249
bool "MCF5249"
depends on !MMU
select COLDFIRE_SW_A7
+ select COLDFIRE_TIMERS
select HAVE_MBAR
select CPU_NO_EFFICIENT_FFS
help
@@ -181,6 +184,7 @@ config M525x
bool "MCF525x"
depends on !MMU
select COLDFIRE_SW_A7
+ select COLDFIRE_TIMERS
select HAVE_MBAR
select CPU_NO_EFFICIENT_FFS
help
@@ -189,10 +193,10 @@ config M525x
config M5271
bool "MCF5271"
depends on !MMU
+ select COLDFIRE_PIT_TIMER
select M527x
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
- select GENERIC_CLOCKEVENTS
help
Freescale (Motorola) ColdFire 5270/5271 processor support.
@@ -200,6 +204,7 @@ config M5272
bool "MCF5272"
depends on !MMU
select COLDFIRE_SW_A7
+ select COLDFIRE_TIMERS
select HAVE_MBAR
select CPU_NO_EFFICIENT_FFS
help
@@ -208,17 +213,17 @@ config M5272
config M5275
bool "MCF5275"
depends on !MMU
+ select COLDFIRE_PIT_TIMER
select M527x
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
- select GENERIC_CLOCKEVENTS
help
Freescale (Motorola) ColdFire 5274/5275 processor support.
config M528x
bool "MCF528x"
depends on !MMU
- select GENERIC_CLOCKEVENTS
+ select COLDFIRE_PIT_TIMER
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
help
@@ -227,6 +232,7 @@ config M528x
config M5307
bool "MCF5307"
depends on !MMU
+ select COLDFIRE_TIMERS
select COLDFIRE_SW_A7
select HAVE_CACHE_CB
select HAVE_MBAR
@@ -237,6 +243,7 @@ config M5307
config M532x
bool "MCF532x"
depends on !MMU
+ select COLDFIRE_TIMERS
select M53xx
select HAVE_CACHE_CB
help
@@ -245,6 +252,7 @@ config M532x
config M537x
bool "MCF537x"
depends on !MMU
+ select COLDFIRE_TIMERS
select M53xx
select HAVE_CACHE_CB
help
@@ -254,6 +262,7 @@ config M5407
bool "MCF5407"
depends on !MMU
select COLDFIRE_SW_A7
+ select COLDFIRE_TIMERS
select HAVE_CACHE_CB
select HAVE_MBAR
select CPU_NO_EFFICIENT_FFS
@@ -263,6 +272,7 @@ config M5407
config M547x
bool "MCF547x"
select M54xx
+ select COLDFIRE_SLTIMERS
select MMU_COLDFIRE if MMU
select FPU if MMU
select HAVE_CACHE_CB
@@ -273,6 +283,7 @@ config M547x
config M548x
bool "MCF548x"
+ select COLDFIRE_SLTIMERS
select MMU_COLDFIRE if MMU
select FPU if MMU
select M54xx
@@ -284,8 +295,8 @@ config M548x
config M5441x
bool "MCF5441x"
+ select COLDFIRE_PIT_TIMER
select MMU_COLDFIRE if MMU
- select GENERIC_CLOCKEVENTS
select HAVE_CACHE_CB
help
Freescale Coldfire 54410/54415/54416/54417/54418 processor support.
@@ -302,6 +313,18 @@ config M54xx
select HAVE_PCI
bool
+config COLDFIRE_PIT_TIMER
+ bool
+ select GENERIC_CLOCKEVENTS
+
+config COLDFIRE_TIMERS
+ bool
+ select LEGACY_TIMER_TICK
+
+config COLDFIRE_SLTIMERS
+ bool
+ select LEGACY_TIMER_TICK
+
endif # COLDFIRE
diff --git a/arch/m68k/coldfire/Makefile b/arch/m68k/coldfire/Makefile
index 573eabca1a3a..a3e18d73d8b8 100644
--- a/arch/m68k/coldfire/Makefile
+++ b/arch/m68k/coldfire/Makefile
@@ -16,20 +16,24 @@
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
obj-$(CONFIG_COLDFIRE) += cache.o clk.o device.o dma.o entry.o vectors.o
-obj-$(CONFIG_M5206) += m5206.o timers.o intc.o reset.o
-obj-$(CONFIG_M5206e) += m5206.o timers.o intc.o reset.o
-obj-$(CONFIG_M520x) += m520x.o pit.o intc-simr.o reset.o
-obj-$(CONFIG_M523x) += m523x.o pit.o dma_timer.o intc-2.o reset.o
-obj-$(CONFIG_M5249) += m5249.o timers.o intc.o intc-5249.o reset.o
-obj-$(CONFIG_M525x) += m525x.o timers.o intc.o intc-525x.o reset.o
-obj-$(CONFIG_M527x) += m527x.o pit.o intc-2.o reset.o
-obj-$(CONFIG_M5272) += m5272.o intc-5272.o timers.o
-obj-$(CONFIG_M528x) += m528x.o pit.o intc-2.o reset.o
-obj-$(CONFIG_M5307) += m5307.o timers.o intc.o reset.o
-obj-$(CONFIG_M53xx) += m53xx.o timers.o intc-simr.o reset.o
-obj-$(CONFIG_M5407) += m5407.o timers.o intc.o reset.o
-obj-$(CONFIG_M54xx) += m54xx.o sltimers.o intc-2.o
-obj-$(CONFIG_M5441x) += m5441x.o pit.o intc-simr.o reset.o
+obj-$(CONFIG_M5206) += m5206.o intc.o reset.o
+obj-$(CONFIG_M5206e) += m5206.o intc.o reset.o
+obj-$(CONFIG_M520x) += m520x.o intc-simr.o reset.o
+obj-$(CONFIG_M523x) += m523x.o dma_timer.o intc-2.o reset.o
+obj-$(CONFIG_M5249) += m5249.o intc.o intc-5249.o reset.o
+obj-$(CONFIG_M525x) += m525x.o intc.o intc-525x.o reset.o
+obj-$(CONFIG_M527x) += m527x.o intc-2.o reset.o
+obj-$(CONFIG_M5272) += m5272.o intc-5272.o
+obj-$(CONFIG_M528x) += m528x.o intc-2.o reset.o
+obj-$(CONFIG_M5307) += m5307.o intc.o reset.o
+obj-$(CONFIG_M53xx) += m53xx.o intc-simr.o reset.o
+obj-$(CONFIG_M5407) += m5407.o intc.o reset.o
+obj-$(CONFIG_M54xx) += m54xx.o intc-2.o
+obj-$(CONFIG_M5441x) += m5441x.o intc-simr.o reset.o
+
+obj-$(CONFIG_COLDFIRE_PIT_TIMER) += pit.o
+obj-$(CONFIG_COLDFIRE_TIMERS) += timers.o
+obj-$(CONFIG_COLDFIRE_SLTIMERS) += sltimers.o
obj-$(CONFIG_NETtel) += nettel.o
obj-$(CONFIG_CLEOPATRA) += nettel.o
diff --git a/arch/m68k/coldfire/sltimers.c b/arch/m68k/coldfire/sltimers.c
index 5ab81c9c552d..25a1319f3cb8 100644
--- a/arch/m68k/coldfire/sltimers.c
+++ b/arch/m68k/coldfire/sltimers.c
@@ -83,14 +83,13 @@ void mcfslt_profile_init(void)
static u32 mcfslt_cycles_per_jiffy;
static u32 mcfslt_cnt;
-static irq_handler_t timer_interrupt;
-
static irqreturn_t mcfslt_tick(int irq, void *dummy)
{
/* Reset Slice Timer 0 */
__raw_writel(MCFSLT_SSR_BE | MCFSLT_SSR_TE, TA(MCFSLT_SSR));
mcfslt_cnt += mcfslt_cycles_per_jiffy;
- return timer_interrupt(irq, dummy);
+ legacy_timer_tick(1);
+ return IRQ_HANDLED;
}
static u64 mcfslt_read_clk(struct clocksource *cs)
@@ -136,7 +135,6 @@ void hw_timer_init(irq_handler_t handler)
/* initialize mcfslt_cnt knowing that slice timers count down */
mcfslt_cnt = mcfslt_cycles_per_jiffy;
- timer_interrupt = handler;
r = request_irq(MCF_IRQ_TIMER, mcfslt_tick, IRQF_TIMER, "timer", NULL);
if (r) {
pr_err("Failed to request irq %d (timer): %pe\n", MCF_IRQ_TIMER,
diff --git a/arch/m68k/coldfire/timers.c b/arch/m68k/coldfire/timers.c
index b8301fddf901..24b5e2d1b00b 100644
--- a/arch/m68k/coldfire/timers.c
+++ b/arch/m68k/coldfire/timers.c
@@ -48,8 +48,6 @@ void coldfire_profile_init(void);
static u32 mcftmr_cycles_per_jiffy;
static u32 mcftmr_cnt;
-static irq_handler_t timer_interrupt;
-
/***************************************************************************/
static void init_timer_irq(void)
@@ -77,7 +75,8 @@ static irqreturn_t mcftmr_tick(int irq, void *dummy)
__raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, TA(MCFTIMER_TER));
mcftmr_cnt += mcftmr_cycles_per_jiffy;
- return timer_interrupt(irq, dummy);
+ legacy_timer_tick(1);
+ return IRQ_HANDLED;
}
/***************************************************************************/
@@ -126,7 +125,6 @@ void hw_timer_init(irq_handler_t handler)
clocksource_register_hz(&mcftmr_clk, FREQ);
- timer_interrupt = handler;
init_timer_irq();
r = request_irq(MCF_IRQ_TIMER, mcftmr_tick, IRQF_TIMER, "timer", NULL);
if (r) {
--
2.27.0
WARNING: multiple messages have this Message-ID (diff)
From: Arnd Bergmann <arnd@kernel.org>
To: linux-kernel@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>,
Arnd Bergmann <arnd@arndb.de>,
Russell King <linux@armlinux.org.uk>,
Tony Luck <tony.luck@intel.com>,
Fenghua Yu <fenghua.yu@intel.com>,
Greg Ungerer <gerg@linux-m68k.org>,
Finn Thain <fthain@telegraphics.com.au>,
Philip Blundell <philb@gnu.org>,
Joshua Thompson <funaho@jurai.org>, Sam Creasey <sammy@sammy.net>,
"James E.J. Bottomley" <James.Bottomley@hansenpartnership.com>,
Helge Deller <deller@gmx.de>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
John Stultz <john.stultz@linaro.org>,
Stephen Boyd <sboyd@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
linux-ia64@vger.kernel.org,
Parisc List <linux-parisc@vger.kernel.org>,
linux-m68k <linux-m68k@lists.linux-m68k.org>,
Linux ARM <linux-arm-kernel@lists.infradead.org>
Subject: [PATCH v2 08/15] m68k: coldfire: use legacy_timer_tick()
Date: Fri, 30 Oct 2020 16:17:51 +0100 [thread overview]
Message-ID: <20201030151758.1241164-9-arnd@kernel.org> (raw)
In-Reply-To: <20201030151758.1241164-1-arnd@kernel.org>
From: Arnd Bergmann <arnd@arndb.de>
Replace the indirect function calls in the timer code
with direct calls to the newly added legacy_timer_tick()
helper for those that have not yet been converted to
generic clockevents.
This makes the timer code a little more self-contained.
Tested-by: Greg Ungerer <gerg@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/m68k/Kconfig.cpu | 35 +++++++++++++++++++++++++++++------
arch/m68k/coldfire/Makefile | 32 ++++++++++++++++++--------------
arch/m68k/coldfire/sltimers.c | 6 ++----
arch/m68k/coldfire/timers.c | 6 ++----
4 files changed, 51 insertions(+), 28 deletions(-)
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
index 694c4fca9f5d..322a35ef14c6 100644
--- a/arch/m68k/Kconfig.cpu
+++ b/arch/m68k/Kconfig.cpu
@@ -137,6 +137,7 @@ config M5206
bool "MCF5206"
depends on !MMU
select COLDFIRE_SW_A7
+ select COLDFIRE_TIMERS
select HAVE_MBAR
select CPU_NO_EFFICIENT_FFS
help
@@ -146,6 +147,7 @@ config M5206e
bool "MCF5206e"
depends on !MMU
select COLDFIRE_SW_A7
+ select COLDFIRE_TIMERS
select HAVE_MBAR
select CPU_NO_EFFICIENT_FFS
help
@@ -154,7 +156,7 @@ config M5206e
config M520x
bool "MCF520x"
depends on !MMU
- select GENERIC_CLOCKEVENTS
+ select COLDFIRE_PIT_TIMER
select HAVE_CACHE_SPLIT
help
Freescale Coldfire 5207/5208 processor support.
@@ -162,7 +164,7 @@ config M520x
config M523x
bool "MCF523x"
depends on !MMU
- select GENERIC_CLOCKEVENTS
+ select COLDFIRE_PIT_TIMER
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
help
@@ -172,6 +174,7 @@ config M5249
bool "MCF5249"
depends on !MMU
select COLDFIRE_SW_A7
+ select COLDFIRE_TIMERS
select HAVE_MBAR
select CPU_NO_EFFICIENT_FFS
help
@@ -181,6 +184,7 @@ config M525x
bool "MCF525x"
depends on !MMU
select COLDFIRE_SW_A7
+ select COLDFIRE_TIMERS
select HAVE_MBAR
select CPU_NO_EFFICIENT_FFS
help
@@ -189,10 +193,10 @@ config M525x
config M5271
bool "MCF5271"
depends on !MMU
+ select COLDFIRE_PIT_TIMER
select M527x
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
- select GENERIC_CLOCKEVENTS
help
Freescale (Motorola) ColdFire 5270/5271 processor support.
@@ -200,6 +204,7 @@ config M5272
bool "MCF5272"
depends on !MMU
select COLDFIRE_SW_A7
+ select COLDFIRE_TIMERS
select HAVE_MBAR
select CPU_NO_EFFICIENT_FFS
help
@@ -208,17 +213,17 @@ config M5272
config M5275
bool "MCF5275"
depends on !MMU
+ select COLDFIRE_PIT_TIMER
select M527x
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
- select GENERIC_CLOCKEVENTS
help
Freescale (Motorola) ColdFire 5274/5275 processor support.
config M528x
bool "MCF528x"
depends on !MMU
- select GENERIC_CLOCKEVENTS
+ select COLDFIRE_PIT_TIMER
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
help
@@ -227,6 +232,7 @@ config M528x
config M5307
bool "MCF5307"
depends on !MMU
+ select COLDFIRE_TIMERS
select COLDFIRE_SW_A7
select HAVE_CACHE_CB
select HAVE_MBAR
@@ -237,6 +243,7 @@ config M5307
config M532x
bool "MCF532x"
depends on !MMU
+ select COLDFIRE_TIMERS
select M53xx
select HAVE_CACHE_CB
help
@@ -245,6 +252,7 @@ config M532x
config M537x
bool "MCF537x"
depends on !MMU
+ select COLDFIRE_TIMERS
select M53xx
select HAVE_CACHE_CB
help
@@ -254,6 +262,7 @@ config M5407
bool "MCF5407"
depends on !MMU
select COLDFIRE_SW_A7
+ select COLDFIRE_TIMERS
select HAVE_CACHE_CB
select HAVE_MBAR
select CPU_NO_EFFICIENT_FFS
@@ -263,6 +272,7 @@ config M5407
config M547x
bool "MCF547x"
select M54xx
+ select COLDFIRE_SLTIMERS
select MMU_COLDFIRE if MMU
select FPU if MMU
select HAVE_CACHE_CB
@@ -273,6 +283,7 @@ config M547x
config M548x
bool "MCF548x"
+ select COLDFIRE_SLTIMERS
select MMU_COLDFIRE if MMU
select FPU if MMU
select M54xx
@@ -284,8 +295,8 @@ config M548x
config M5441x
bool "MCF5441x"
+ select COLDFIRE_PIT_TIMER
select MMU_COLDFIRE if MMU
- select GENERIC_CLOCKEVENTS
select HAVE_CACHE_CB
help
Freescale Coldfire 54410/54415/54416/54417/54418 processor support.
@@ -302,6 +313,18 @@ config M54xx
select HAVE_PCI
bool
+config COLDFIRE_PIT_TIMER
+ bool
+ select GENERIC_CLOCKEVENTS
+
+config COLDFIRE_TIMERS
+ bool
+ select LEGACY_TIMER_TICK
+
+config COLDFIRE_SLTIMERS
+ bool
+ select LEGACY_TIMER_TICK
+
endif # COLDFIRE
diff --git a/arch/m68k/coldfire/Makefile b/arch/m68k/coldfire/Makefile
index 573eabca1a3a..a3e18d73d8b8 100644
--- a/arch/m68k/coldfire/Makefile
+++ b/arch/m68k/coldfire/Makefile
@@ -16,20 +16,24 @@
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
obj-$(CONFIG_COLDFIRE) += cache.o clk.o device.o dma.o entry.o vectors.o
-obj-$(CONFIG_M5206) += m5206.o timers.o intc.o reset.o
-obj-$(CONFIG_M5206e) += m5206.o timers.o intc.o reset.o
-obj-$(CONFIG_M520x) += m520x.o pit.o intc-simr.o reset.o
-obj-$(CONFIG_M523x) += m523x.o pit.o dma_timer.o intc-2.o reset.o
-obj-$(CONFIG_M5249) += m5249.o timers.o intc.o intc-5249.o reset.o
-obj-$(CONFIG_M525x) += m525x.o timers.o intc.o intc-525x.o reset.o
-obj-$(CONFIG_M527x) += m527x.o pit.o intc-2.o reset.o
-obj-$(CONFIG_M5272) += m5272.o intc-5272.o timers.o
-obj-$(CONFIG_M528x) += m528x.o pit.o intc-2.o reset.o
-obj-$(CONFIG_M5307) += m5307.o timers.o intc.o reset.o
-obj-$(CONFIG_M53xx) += m53xx.o timers.o intc-simr.o reset.o
-obj-$(CONFIG_M5407) += m5407.o timers.o intc.o reset.o
-obj-$(CONFIG_M54xx) += m54xx.o sltimers.o intc-2.o
-obj-$(CONFIG_M5441x) += m5441x.o pit.o intc-simr.o reset.o
+obj-$(CONFIG_M5206) += m5206.o intc.o reset.o
+obj-$(CONFIG_M5206e) += m5206.o intc.o reset.o
+obj-$(CONFIG_M520x) += m520x.o intc-simr.o reset.o
+obj-$(CONFIG_M523x) += m523x.o dma_timer.o intc-2.o reset.o
+obj-$(CONFIG_M5249) += m5249.o intc.o intc-5249.o reset.o
+obj-$(CONFIG_M525x) += m525x.o intc.o intc-525x.o reset.o
+obj-$(CONFIG_M527x) += m527x.o intc-2.o reset.o
+obj-$(CONFIG_M5272) += m5272.o intc-5272.o
+obj-$(CONFIG_M528x) += m528x.o intc-2.o reset.o
+obj-$(CONFIG_M5307) += m5307.o intc.o reset.o
+obj-$(CONFIG_M53xx) += m53xx.o intc-simr.o reset.o
+obj-$(CONFIG_M5407) += m5407.o intc.o reset.o
+obj-$(CONFIG_M54xx) += m54xx.o intc-2.o
+obj-$(CONFIG_M5441x) += m5441x.o intc-simr.o reset.o
+
+obj-$(CONFIG_COLDFIRE_PIT_TIMER) += pit.o
+obj-$(CONFIG_COLDFIRE_TIMERS) += timers.o
+obj-$(CONFIG_COLDFIRE_SLTIMERS) += sltimers.o
obj-$(CONFIG_NETtel) += nettel.o
obj-$(CONFIG_CLEOPATRA) += nettel.o
diff --git a/arch/m68k/coldfire/sltimers.c b/arch/m68k/coldfire/sltimers.c
index 5ab81c9c552d..25a1319f3cb8 100644
--- a/arch/m68k/coldfire/sltimers.c
+++ b/arch/m68k/coldfire/sltimers.c
@@ -83,14 +83,13 @@ void mcfslt_profile_init(void)
static u32 mcfslt_cycles_per_jiffy;
static u32 mcfslt_cnt;
-static irq_handler_t timer_interrupt;
-
static irqreturn_t mcfslt_tick(int irq, void *dummy)
{
/* Reset Slice Timer 0 */
__raw_writel(MCFSLT_SSR_BE | MCFSLT_SSR_TE, TA(MCFSLT_SSR));
mcfslt_cnt += mcfslt_cycles_per_jiffy;
- return timer_interrupt(irq, dummy);
+ legacy_timer_tick(1);
+ return IRQ_HANDLED;
}
static u64 mcfslt_read_clk(struct clocksource *cs)
@@ -136,7 +135,6 @@ void hw_timer_init(irq_handler_t handler)
/* initialize mcfslt_cnt knowing that slice timers count down */
mcfslt_cnt = mcfslt_cycles_per_jiffy;
- timer_interrupt = handler;
r = request_irq(MCF_IRQ_TIMER, mcfslt_tick, IRQF_TIMER, "timer", NULL);
if (r) {
pr_err("Failed to request irq %d (timer): %pe\n", MCF_IRQ_TIMER,
diff --git a/arch/m68k/coldfire/timers.c b/arch/m68k/coldfire/timers.c
index b8301fddf901..24b5e2d1b00b 100644
--- a/arch/m68k/coldfire/timers.c
+++ b/arch/m68k/coldfire/timers.c
@@ -48,8 +48,6 @@ void coldfire_profile_init(void);
static u32 mcftmr_cycles_per_jiffy;
static u32 mcftmr_cnt;
-static irq_handler_t timer_interrupt;
-
/***************************************************************************/
static void init_timer_irq(void)
@@ -77,7 +75,8 @@ static irqreturn_t mcftmr_tick(int irq, void *dummy)
__raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, TA(MCFTIMER_TER));
mcftmr_cnt += mcftmr_cycles_per_jiffy;
- return timer_interrupt(irq, dummy);
+ legacy_timer_tick(1);
+ return IRQ_HANDLED;
}
/***************************************************************************/
@@ -126,7 +125,6 @@ void hw_timer_init(irq_handler_t handler)
clocksource_register_hz(&mcftmr_clk, FREQ);
- timer_interrupt = handler;
init_timer_irq();
r = request_irq(MCF_IRQ_TIMER, mcftmr_tick, IRQF_TIMER, "timer", NULL);
if (r) {
--
2.27.0
WARNING: multiple messages have this Message-ID (diff)
From: Arnd Bergmann <arnd@kernel.org>
To: linux-kernel@vger.kernel.org
Cc: Sam Creasey <sammy@sammy.net>, Fenghua Yu <fenghua.yu@intel.com>,
Linus Walleij <linus.walleij@linaro.org>,
Tony Luck <tony.luck@intel.com>,
linux-ia64@vger.kernel.org,
Parisc List <linux-parisc@vger.kernel.org>,
Arnd Bergmann <arnd@arndb.de>, Stephen Boyd <sboyd@kernel.org>,
Philip Blundell <philb@gnu.org>, Helge Deller <deller@gmx.de>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Russell King <linux@armlinux.org.uk>,
Finn Thain <fthain@telegraphics.com.au>,
"James E.J. Bottomley" <James.Bottomley@hansenpartnership.com>,
linux-m68k <linux-m68k@lists.linux-m68k.org>,
John Stultz <john.stultz@linaro.org>,
Linux ARM <linux-arm-kernel@lists.infradead.org>,
Thomas Gleixner <tglx@linutronix.de>,
Greg Ungerer <gerg@linux-m68k.org>,
Joshua Thompson <funaho@jurai.org>
Subject: [PATCH v2 08/15] m68k: coldfire: use legacy_timer_tick()
Date: Fri, 30 Oct 2020 16:17:51 +0100 [thread overview]
Message-ID: <20201030151758.1241164-9-arnd@kernel.org> (raw)
In-Reply-To: <20201030151758.1241164-1-arnd@kernel.org>
From: Arnd Bergmann <arnd@arndb.de>
Replace the indirect function calls in the timer code
with direct calls to the newly added legacy_timer_tick()
helper for those that have not yet been converted to
generic clockevents.
This makes the timer code a little more self-contained.
Tested-by: Greg Ungerer <gerg@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/m68k/Kconfig.cpu | 35 +++++++++++++++++++++++++++++------
arch/m68k/coldfire/Makefile | 32 ++++++++++++++++++--------------
arch/m68k/coldfire/sltimers.c | 6 ++----
arch/m68k/coldfire/timers.c | 6 ++----
4 files changed, 51 insertions(+), 28 deletions(-)
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
index 694c4fca9f5d..322a35ef14c6 100644
--- a/arch/m68k/Kconfig.cpu
+++ b/arch/m68k/Kconfig.cpu
@@ -137,6 +137,7 @@ config M5206
bool "MCF5206"
depends on !MMU
select COLDFIRE_SW_A7
+ select COLDFIRE_TIMERS
select HAVE_MBAR
select CPU_NO_EFFICIENT_FFS
help
@@ -146,6 +147,7 @@ config M5206e
bool "MCF5206e"
depends on !MMU
select COLDFIRE_SW_A7
+ select COLDFIRE_TIMERS
select HAVE_MBAR
select CPU_NO_EFFICIENT_FFS
help
@@ -154,7 +156,7 @@ config M5206e
config M520x
bool "MCF520x"
depends on !MMU
- select GENERIC_CLOCKEVENTS
+ select COLDFIRE_PIT_TIMER
select HAVE_CACHE_SPLIT
help
Freescale Coldfire 5207/5208 processor support.
@@ -162,7 +164,7 @@ config M520x
config M523x
bool "MCF523x"
depends on !MMU
- select GENERIC_CLOCKEVENTS
+ select COLDFIRE_PIT_TIMER
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
help
@@ -172,6 +174,7 @@ config M5249
bool "MCF5249"
depends on !MMU
select COLDFIRE_SW_A7
+ select COLDFIRE_TIMERS
select HAVE_MBAR
select CPU_NO_EFFICIENT_FFS
help
@@ -181,6 +184,7 @@ config M525x
bool "MCF525x"
depends on !MMU
select COLDFIRE_SW_A7
+ select COLDFIRE_TIMERS
select HAVE_MBAR
select CPU_NO_EFFICIENT_FFS
help
@@ -189,10 +193,10 @@ config M525x
config M5271
bool "MCF5271"
depends on !MMU
+ select COLDFIRE_PIT_TIMER
select M527x
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
- select GENERIC_CLOCKEVENTS
help
Freescale (Motorola) ColdFire 5270/5271 processor support.
@@ -200,6 +204,7 @@ config M5272
bool "MCF5272"
depends on !MMU
select COLDFIRE_SW_A7
+ select COLDFIRE_TIMERS
select HAVE_MBAR
select CPU_NO_EFFICIENT_FFS
help
@@ -208,17 +213,17 @@ config M5272
config M5275
bool "MCF5275"
depends on !MMU
+ select COLDFIRE_PIT_TIMER
select M527x
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
- select GENERIC_CLOCKEVENTS
help
Freescale (Motorola) ColdFire 5274/5275 processor support.
config M528x
bool "MCF528x"
depends on !MMU
- select GENERIC_CLOCKEVENTS
+ select COLDFIRE_PIT_TIMER
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
help
@@ -227,6 +232,7 @@ config M528x
config M5307
bool "MCF5307"
depends on !MMU
+ select COLDFIRE_TIMERS
select COLDFIRE_SW_A7
select HAVE_CACHE_CB
select HAVE_MBAR
@@ -237,6 +243,7 @@ config M5307
config M532x
bool "MCF532x"
depends on !MMU
+ select COLDFIRE_TIMERS
select M53xx
select HAVE_CACHE_CB
help
@@ -245,6 +252,7 @@ config M532x
config M537x
bool "MCF537x"
depends on !MMU
+ select COLDFIRE_TIMERS
select M53xx
select HAVE_CACHE_CB
help
@@ -254,6 +262,7 @@ config M5407
bool "MCF5407"
depends on !MMU
select COLDFIRE_SW_A7
+ select COLDFIRE_TIMERS
select HAVE_CACHE_CB
select HAVE_MBAR
select CPU_NO_EFFICIENT_FFS
@@ -263,6 +272,7 @@ config M5407
config M547x
bool "MCF547x"
select M54xx
+ select COLDFIRE_SLTIMERS
select MMU_COLDFIRE if MMU
select FPU if MMU
select HAVE_CACHE_CB
@@ -273,6 +283,7 @@ config M547x
config M548x
bool "MCF548x"
+ select COLDFIRE_SLTIMERS
select MMU_COLDFIRE if MMU
select FPU if MMU
select M54xx
@@ -284,8 +295,8 @@ config M548x
config M5441x
bool "MCF5441x"
+ select COLDFIRE_PIT_TIMER
select MMU_COLDFIRE if MMU
- select GENERIC_CLOCKEVENTS
select HAVE_CACHE_CB
help
Freescale Coldfire 54410/54415/54416/54417/54418 processor support.
@@ -302,6 +313,18 @@ config M54xx
select HAVE_PCI
bool
+config COLDFIRE_PIT_TIMER
+ bool
+ select GENERIC_CLOCKEVENTS
+
+config COLDFIRE_TIMERS
+ bool
+ select LEGACY_TIMER_TICK
+
+config COLDFIRE_SLTIMERS
+ bool
+ select LEGACY_TIMER_TICK
+
endif # COLDFIRE
diff --git a/arch/m68k/coldfire/Makefile b/arch/m68k/coldfire/Makefile
index 573eabca1a3a..a3e18d73d8b8 100644
--- a/arch/m68k/coldfire/Makefile
+++ b/arch/m68k/coldfire/Makefile
@@ -16,20 +16,24 @@
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
obj-$(CONFIG_COLDFIRE) += cache.o clk.o device.o dma.o entry.o vectors.o
-obj-$(CONFIG_M5206) += m5206.o timers.o intc.o reset.o
-obj-$(CONFIG_M5206e) += m5206.o timers.o intc.o reset.o
-obj-$(CONFIG_M520x) += m520x.o pit.o intc-simr.o reset.o
-obj-$(CONFIG_M523x) += m523x.o pit.o dma_timer.o intc-2.o reset.o
-obj-$(CONFIG_M5249) += m5249.o timers.o intc.o intc-5249.o reset.o
-obj-$(CONFIG_M525x) += m525x.o timers.o intc.o intc-525x.o reset.o
-obj-$(CONFIG_M527x) += m527x.o pit.o intc-2.o reset.o
-obj-$(CONFIG_M5272) += m5272.o intc-5272.o timers.o
-obj-$(CONFIG_M528x) += m528x.o pit.o intc-2.o reset.o
-obj-$(CONFIG_M5307) += m5307.o timers.o intc.o reset.o
-obj-$(CONFIG_M53xx) += m53xx.o timers.o intc-simr.o reset.o
-obj-$(CONFIG_M5407) += m5407.o timers.o intc.o reset.o
-obj-$(CONFIG_M54xx) += m54xx.o sltimers.o intc-2.o
-obj-$(CONFIG_M5441x) += m5441x.o pit.o intc-simr.o reset.o
+obj-$(CONFIG_M5206) += m5206.o intc.o reset.o
+obj-$(CONFIG_M5206e) += m5206.o intc.o reset.o
+obj-$(CONFIG_M520x) += m520x.o intc-simr.o reset.o
+obj-$(CONFIG_M523x) += m523x.o dma_timer.o intc-2.o reset.o
+obj-$(CONFIG_M5249) += m5249.o intc.o intc-5249.o reset.o
+obj-$(CONFIG_M525x) += m525x.o intc.o intc-525x.o reset.o
+obj-$(CONFIG_M527x) += m527x.o intc-2.o reset.o
+obj-$(CONFIG_M5272) += m5272.o intc-5272.o
+obj-$(CONFIG_M528x) += m528x.o intc-2.o reset.o
+obj-$(CONFIG_M5307) += m5307.o intc.o reset.o
+obj-$(CONFIG_M53xx) += m53xx.o intc-simr.o reset.o
+obj-$(CONFIG_M5407) += m5407.o intc.o reset.o
+obj-$(CONFIG_M54xx) += m54xx.o intc-2.o
+obj-$(CONFIG_M5441x) += m5441x.o intc-simr.o reset.o
+
+obj-$(CONFIG_COLDFIRE_PIT_TIMER) += pit.o
+obj-$(CONFIG_COLDFIRE_TIMERS) += timers.o
+obj-$(CONFIG_COLDFIRE_SLTIMERS) += sltimers.o
obj-$(CONFIG_NETtel) += nettel.o
obj-$(CONFIG_CLEOPATRA) += nettel.o
diff --git a/arch/m68k/coldfire/sltimers.c b/arch/m68k/coldfire/sltimers.c
index 5ab81c9c552d..25a1319f3cb8 100644
--- a/arch/m68k/coldfire/sltimers.c
+++ b/arch/m68k/coldfire/sltimers.c
@@ -83,14 +83,13 @@ void mcfslt_profile_init(void)
static u32 mcfslt_cycles_per_jiffy;
static u32 mcfslt_cnt;
-static irq_handler_t timer_interrupt;
-
static irqreturn_t mcfslt_tick(int irq, void *dummy)
{
/* Reset Slice Timer 0 */
__raw_writel(MCFSLT_SSR_BE | MCFSLT_SSR_TE, TA(MCFSLT_SSR));
mcfslt_cnt += mcfslt_cycles_per_jiffy;
- return timer_interrupt(irq, dummy);
+ legacy_timer_tick(1);
+ return IRQ_HANDLED;
}
static u64 mcfslt_read_clk(struct clocksource *cs)
@@ -136,7 +135,6 @@ void hw_timer_init(irq_handler_t handler)
/* initialize mcfslt_cnt knowing that slice timers count down */
mcfslt_cnt = mcfslt_cycles_per_jiffy;
- timer_interrupt = handler;
r = request_irq(MCF_IRQ_TIMER, mcfslt_tick, IRQF_TIMER, "timer", NULL);
if (r) {
pr_err("Failed to request irq %d (timer): %pe\n", MCF_IRQ_TIMER,
diff --git a/arch/m68k/coldfire/timers.c b/arch/m68k/coldfire/timers.c
index b8301fddf901..24b5e2d1b00b 100644
--- a/arch/m68k/coldfire/timers.c
+++ b/arch/m68k/coldfire/timers.c
@@ -48,8 +48,6 @@ void coldfire_profile_init(void);
static u32 mcftmr_cycles_per_jiffy;
static u32 mcftmr_cnt;
-static irq_handler_t timer_interrupt;
-
/***************************************************************************/
static void init_timer_irq(void)
@@ -77,7 +75,8 @@ static irqreturn_t mcftmr_tick(int irq, void *dummy)
__raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, TA(MCFTIMER_TER));
mcftmr_cnt += mcftmr_cycles_per_jiffy;
- return timer_interrupt(irq, dummy);
+ legacy_timer_tick(1);
+ return IRQ_HANDLED;
}
/***************************************************************************/
@@ -126,7 +125,6 @@ void hw_timer_init(irq_handler_t handler)
clocksource_register_hz(&mcftmr_clk, FREQ);
- timer_interrupt = handler;
init_timer_irq();
r = request_irq(MCF_IRQ_TIMER, mcftmr_tick, IRQF_TIMER, "timer", NULL);
if (r) {
--
2.27.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-10-30 15:17 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-30 15:17 [PATCH v2 00/15] timers: clean up ARCH_GETTIMEOFFSET, LEGACY_TIMER_TICK Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` [PATCH v2 01/15] ARM: remove ebsa110 platform Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-11-01 17:28 ` kernel test robot
2020-10-30 15:17 ` [PATCH v2 02/15] net: remove am79c961a driver Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` [PATCH v2 03/15] timekeeping: remove arch_gettimeoffset Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` [PATCH v2 04/15] timekeeping: add CONFIG_LEGACY_TIMER_TICK Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` [PATCH v2 05/15] ia64: convert to legacy_timer_tick Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-12-18 21:29 ` John Paul Adrian Glaubitz
2020-12-18 21:29 ` John Paul Adrian Glaubitz
2020-12-18 21:29 ` John Paul Adrian Glaubitz
2020-12-18 22:07 ` Arnd Bergmann
2020-12-18 22:07 ` Arnd Bergmann
2020-12-18 22:07 ` Arnd Bergmann
2020-12-18 22:13 ` John Paul Adrian Glaubitz
2020-12-18 22:13 ` John Paul Adrian Glaubitz
2020-12-18 22:13 ` John Paul Adrian Glaubitz
2020-12-18 22:32 ` John Paul Adrian Glaubitz
2020-12-18 22:32 ` John Paul Adrian Glaubitz
2020-12-18 22:32 ` John Paul Adrian Glaubitz
2020-10-30 15:17 ` [PATCH v2 06/15] ARM: rpc: use legacy_timer_tick Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` [PATCH v2 07/15] parisc: " Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 17:13 ` Helge Deller
2020-10-30 17:13 ` Helge Deller
2020-10-30 17:13 ` Helge Deller
2020-10-30 19:33 ` Arnd Bergmann
2020-10-30 19:33 ` Arnd Bergmann
2020-10-30 19:33 ` Arnd Bergmann
2020-10-30 19:48 ` Helge Deller
2020-10-30 19:48 ` Helge Deller
2020-10-30 19:48 ` Helge Deller
2020-10-30 20:37 ` Arnd Bergmann
2020-10-30 20:37 ` Arnd Bergmann
2020-10-30 20:37 ` Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann [this message]
2020-10-30 15:17 ` [PATCH v2 08/15] m68k: coldfire: use legacy_timer_tick() Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` [PATCH v2 09/15] m68k: split heartbeat out of timer function Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` [PATCH v2 10/15] m68k: sun3/sun3c: use legacy_timer_tick Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` [PATCH v2 11/15] m68k: m68328: use legacy_timer_tick() Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` [PATCH v2 12/15] m68k: change remaining timers to legacy_timer_tick Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` [PATCH v2 13/15] m68k: remove timer_interrupt() function Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` [PATCH v2 14/15] timekeeping: remove xtime_update Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` [PATCH v2 15/15] timekeeping: default GENERIC_CLOCKEVENTS to enabled Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-10-30 15:17 ` Arnd Bergmann
2020-11-01 3:43 ` [PATCH v2 00/15] timers: clean up ARCH_GETTIMEOFFSET, LEGACY_TIMER_TICK Finn Thain
2020-11-01 3:43 ` Finn Thain
2020-11-01 3:43 ` Finn Thain
2020-11-01 9:53 ` Arnd Bergmann
2020-11-01 9:53 ` Arnd Bergmann
2020-11-01 9:53 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201030151758.1241164-9-arnd@kernel.org \
--to=arnd@kernel.org \
--cc=James.Bottomley@hansenpartnership.com \
--cc=arnd@arndb.de \
--cc=daniel.lezcano@linaro.org \
--cc=deller@gmx.de \
--cc=fenghua.yu@intel.com \
--cc=fthain@telegraphics.com.au \
--cc=funaho@jurai.org \
--cc=gerg@linux-m68k.org \
--cc=john.stultz@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-ia64@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-m68k@lists.linux-m68k.org \
--cc=linux-parisc@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=philb@gnu.org \
--cc=sammy@sammy.net \
--cc=sboyd@kernel.org \
--cc=tglx@linutronix.de \
--cc=tony.luck@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.