From: Krzysztof Kozlowski <krzk@kernel.org>
To: Yong Wu <yong.wu@mediatek.com>,
Honghui Zhang <honghui.zhang@mediatek.com>
Cc: youlin.pei@mediatek.com, devicetree@vger.kernel.org,
Nicolas Boichat <drinkcat@chromium.org>,
srv_heupstream@mediatek.com, Fabien Parent <fparent@baylibre.com>,
Robin Murphy <robin.murphy@arm.com>,
linux-kernel@vger.kernel.org, Tomasz Figa <tfiga@google.com>,
iommu@lists.linux-foundation.org,
Rob Herring <robh+dt@kernel.org>,
linux-mediatek@lists.infradead.org,
Matthias Brugger <matthias.bgg@gmail.com>,
ming-fan.chen@mediatek.com, anan.sun@mediatek.com,
Will Deacon <will@kernel.org>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v4 1/3] dt-bindings: memory: mediatek: Convert SMI to DT schema
Date: Sat, 31 Oct 2020 12:36:23 +0100 [thread overview]
Message-ID: <20201031113623.GA4019@kozik-lap> (raw)
In-Reply-To: <20201030091254.26382-2-yong.wu@mediatek.com>
On Fri, Oct 30, 2020 at 05:12:52PM +0800, Yong Wu wrote:
> Convert MediaTek SMI to DT schema.
>
> CC: Fabien Parent <fparent@baylibre.com>
> CC: Ming-Fan Chen <ming-fan.chen@mediatek.com>
> CC: Matthias Brugger <matthias.bgg@gmail.com>
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> ---
> .../mediatek,smi-common.txt | 50 -------
> .../mediatek,smi-common.yaml | 140 ++++++++++++++++++
> .../memory-controllers/mediatek,smi-larb.txt | 50 -------
> .../memory-controllers/mediatek,smi-larb.yaml | 129 ++++++++++++++++
> 4 files changed, 269 insertions(+), 100 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
+Cc Honghui Zhang,
Your Ack is needed as you contributed descriptions to the bindings and
work is being relicensed to GPL-2.0-only OR BSD-2-Clause.
Best regards,
Krzysztof
> create mode 100644 Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
> delete mode 100644 Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
> create mode 100644 Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
>
> diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
> deleted file mode 100644
> index dbafffe3f41e..000000000000
> --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
> +++ /dev/null
> @@ -1,50 +0,0 @@
> -SMI (Smart Multimedia Interface) Common
> -
> -The hardware block diagram please check bindings/iommu/mediatek,iommu.txt
> -
> -Mediatek SMI have two generations of HW architecture, here is the list
> -which generation the SoCs use:
> -generation 1: mt2701 and mt7623.
> -generation 2: mt2712, mt6779, mt8167, mt8173 and mt8183.
> -
> -There's slight differences between the two SMI, for generation 2, the
> -register which control the iommu port is at each larb's register base. But
> -for generation 1, the register is at smi ao base(smi always on register
> -base). Besides that, the smi async clock should be prepared and enabled for
> -SMI generation 1 to transform the smi clock into emi clock domain, but that is
> -not needed for SMI generation 2.
> -
> -Required properties:
> -- compatible : must be one of :
> - "mediatek,mt2701-smi-common"
> - "mediatek,mt2712-smi-common"
> - "mediatek,mt6779-smi-common"
> - "mediatek,mt7623-smi-common", "mediatek,mt2701-smi-common"
> - "mediatek,mt8167-smi-common"
> - "mediatek,mt8173-smi-common"
> - "mediatek,mt8183-smi-common"
> -- reg : the register and size of the SMI block.
> -- power-domains : a phandle to the power domain of this local arbiter.
> -- clocks : Must contain an entry for each entry in clock-names.
> -- clock-names : must contain 3 entries for generation 1 smi HW and 2 entries
> - for generation 2 smi HW as follows:
> - - "apb" : Advanced Peripheral Bus clock, It's the clock for setting
> - the register.
> - - "smi" : It's the clock for transfer data and command.
> - They may be the same if both source clocks are the same.
> - - "async" : asynchronous clock, it help transform the smi clock into the emi
> - clock domain, this clock is only needed by generation 1 smi HW.
> - and these 2 option clocks for generation 2 smi HW:
> - - "gals0": the path0 clock of GALS(Global Async Local Sync).
> - - "gals1": the path1 clock of GALS(Global Async Local Sync).
> - Here is the list which has this GALS: mt6779 and mt8183.
> -
> -Example:
> - smi_common: smi@14022000 {
> - compatible = "mediatek,mt8173-smi-common";
> - reg = <0 0x14022000 0 0x1000>;
> - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
> - clocks = <&mmsys CLK_MM_SMI_COMMON>,
> - <&mmsys CLK_MM_SMI_COMMON>;
> - clock-names = "apb", "smi";
> - };
> diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
> new file mode 100644
> index 000000000000..e050a0c2aed6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
> @@ -0,0 +1,140 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (c) 2020 MediaTek Inc.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/memory-controllers/mediatek,smi-common.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: SMI (Smart Multimedia Interface) Common
> +
> +maintainers:
> + - Yong Wu <yong.wu@mediatek.com>
> +
> +description: |+
> + The hardware block diagram please check bindings/iommu/mediatek,iommu.yaml
> +
> + MediaTek SMI have two generations of HW architecture, here is the list
> + which generation the SoCs use:
> + generation 1: mt2701 and mt7623.
> + generation 2: mt2712, mt6779, mt8167, mt8173 and mt8183.
> +
> + There's slight differences between the two SMI, for generation 2, the
> + register which control the iommu port is at each larb's register base. But
> + for generation 1, the register is at smi ao base(smi always on register
> + base). Besides that, the smi async clock should be prepared and enabled for
> + SMI generation 1 to transform the smi clock into emi clock domain, but that is
> + not needed for SMI generation 2.
> +
> +properties:
> + compatible:
> + oneOf:
> + - enum:
> + - mediatek,mt2701-smi-common
> + - mediatek,mt2712-smi-common
> + - mediatek,mt6779-smi-common
> + - mediatek,mt8167-smi-common
> + - mediatek,mt8173-smi-common
> + - mediatek,mt8183-smi-common
> +
> + - description: for mt7623
> + items:
> + - const: mediatek,mt7623-smi-common
> + - const: mediatek,mt2701-smi-common
> +
> + reg:
> + maxItems: 1
> +
> + power-domains:
> + maxItems: 1
> +
> + clocks:
> + description: |
> + apb and smi are mandatory. the async is only for generation 1 smi HW.
> + gals(global async local sync) also is optional, see below.
> + minItems: 2
> + maxItems: 4
> + items:
> + - description: apb is Advanced Peripheral Bus clock, It's the clock for
> + setting the register.
> + - description: smi is the clock for transfer data and command.
> + - description: async is asynchronous clock, it help transform the smi clock
> + into the emi clock domain.
> + - description: gals0 is the path0 clock of gals.
> + - description: gals1 is the path1 clock of gals.
> +
> + clock-names:
> + minItems: 2
> + maxItems: 4
> +
> +required:
> + - compatible
> + - reg
> + - power-domains
> + - clocks
> + - clock-names
> +
> +allOf:
> + - if: #only for gen1 HW
> + properties:
> + compatible:
> + contains:
> + enum:
> + - mediatek,mt2701-smi-common
> + then:
> + properties:
> + clock:
> + items:
> + minItems: 3
> + maxItems: 3
> + clock-names:
> + items:
> + - const: apb
> + - const: smi
> + - const: async
> +
> + - if: #for gen2 HW that have gals
> + properties:
> + compatible:
> + enum:
> + - mediatek,mt6779-smi-common
> + - mediatek,mt8183-smi-common
> +
> + then:
> + properties:
> + clock:
> + items:
> + minItems: 4
> + maxItems: 4
> + clock-names:
> + items:
> + - const: apb
> + - const: smi
> + - const: gals0
> + - const: gals1
> +
> + else: #for gen2 HW that don't have gals
> + properties:
> + clock:
> + items:
> + minItems: 2
> + maxItems: 2
> + clock-names:
> + items:
> + - const: apb
> + - const: smi
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/mt8173-clk.h>
> + #include <dt-bindings/power/mt8173-power.h>
> +
> + smi_common: smi@14022000 {
> + compatible = "mediatek,mt8173-smi-common";
> + reg = <0x14022000 0x1000>;
> + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
> + clocks = <&mmsys CLK_MM_SMI_COMMON>,
> + <&mmsys CLK_MM_SMI_COMMON>;
> + clock-names = "apb", "smi";
> + };
> diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
> deleted file mode 100644
> index 0c5de12b5496..000000000000
> --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
> +++ /dev/null
> @@ -1,50 +0,0 @@
> -SMI (Smart Multimedia Interface) Local Arbiter
> -
> -The hardware block diagram please check bindings/iommu/mediatek,iommu.txt
> -
> -Required properties:
> -- compatible : must be one of :
> - "mediatek,mt2701-smi-larb"
> - "mediatek,mt2712-smi-larb"
> - "mediatek,mt6779-smi-larb"
> - "mediatek,mt7623-smi-larb", "mediatek,mt2701-smi-larb"
> - "mediatek,mt8167-smi-larb"
> - "mediatek,mt8173-smi-larb"
> - "mediatek,mt8183-smi-larb"
> -- reg : the register and size of this local arbiter.
> -- mediatek,smi : a phandle to the smi_common node.
> -- power-domains : a phandle to the power domain of this local arbiter.
> -- clocks : Must contain an entry for each entry in clock-names.
> -- clock-names: must contain 2 entries, as follows:
> - - "apb" : Advanced Peripheral Bus clock, It's the clock for setting
> - the register.
> - - "smi" : It's the clock for transfer data and command.
> - and this optional clock name:
> - - "gals": the clock for GALS(Global Async Local Sync).
> - Here is the list which has this GALS: mt8183.
> -
> -Required property for mt2701, mt2712, mt6779, mt7623 and mt8167:
> -- mediatek,larb-id :the hardware id of this larb.
> -
> -Example:
> - larb1: larb@16010000 {
> - compatible = "mediatek,mt8173-smi-larb";
> - reg = <0 0x16010000 0 0x1000>;
> - mediatek,smi = <&smi_common>;
> - power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>;
> - clocks = <&vdecsys CLK_VDEC_CKEN>,
> - <&vdecsys CLK_VDEC_LARB_CKEN>;
> - clock-names = "apb", "smi";
> - };
> -
> -Example for mt2701:
> - larb0: larb@14010000 {
> - compatible = "mediatek,mt2701-smi-larb";
> - reg = <0 0x14010000 0 0x1000>;
> - mediatek,smi = <&smi_common>;
> - mediatek,larb-id = <0>;
> - clocks = <&mmsys CLK_MM_SMI_LARB0>,
> - <&mmsys CLK_MM_SMI_LARB0>;
> - clock-names = "apb", "smi";
> - power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
> - };
> diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
> new file mode 100644
> index 000000000000..a11a105e872f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
> @@ -0,0 +1,129 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (c) 2020 MediaTek Inc.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/memory-controllers/mediatek,smi-larb.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: SMI (Smart Multimedia Interface) Local Arbiter
> +
> +maintainers:
> + - Yong Wu <yong.wu@mediatek.com>
> +
> +description: |+
> + The hardware block diagram please check bindings/iommu/mediatek,iommu.yaml
> +
> +properties:
> + compatible:
> + oneOf:
> + - enum:
> + - mediatek,mt2701-smi-larb
> + - mediatek,mt2712-smi-larb
> + - mediatek,mt6779-smi-larb
> + - mediatek,mt8167-smi-larb
> + - mediatek,mt8173-smi-larb
> + - mediatek,mt8183-smi-larb
> +
> + - description: for mt7623
> + items:
> + - const: mediatek,mt7623-smi-larb
> + - const: mediatek,mt2701-smi-larb
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + description: |
> + apb and smi are mandatory. gals(global async local sync) is optional.
> + minItems: 2
> + maxItems: 3
> + items:
> + - description: apb is Advanced Peripheral Bus clock, It's the clock for
> + setting the register.
> + - description: smi is the clock for transfer data and command.
> + - description: the clock for gals.
> +
> + clock-names:
> + minItems: 2
> + maxItems: 3
> +
> + power-domains:
> + maxItems: 1
> +
> + mediatek,smi:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description: a phandle to the smi_common node.
> +
> + mediatek,larb-id:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0
> + maximum: 31
> + description: the hardware id of this larb.
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> + - power-domains
> +
> +allOf:
> + - if: # HW has gals
> + properties:
> + compatible:
> + enum:
> + - mediatek,mt8183-smi-larb
> +
> + then:
> + properties:
> + clock:
> + items:
> + minItems: 3
> + maxItems: 3
> + clock-names:
> + items:
> + - const: apb
> + - const: smi
> + - const: gals
> +
> + else:
> + properties:
> + clock:
> + items:
> + minItems: 2
> + maxItems: 2
> + clock-names:
> + items:
> + - const: apb
> + - const: smi
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - mediatek,mt2701-smi-larb
> + - mediatek,mt2712-smi-larb
> + - mediatek,mt6779-smi-larb
> + - mediatek,mt8167-smi-larb
> +
> + then:
> + required:
> + - mediatek,larb-id
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/mt8173-clk.h>
> + #include <dt-bindings/power/mt8173-power.h>
> +
> + larb1: larb@16010000 {
> + compatible = "mediatek,mt8173-smi-larb";
> + reg = <0x16010000 0x1000>;
> + mediatek,smi = <&smi_common>;
> + power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>;
> + clocks = <&vdecsys CLK_VDEC_CKEN>,
> + <&vdecsys CLK_VDEC_LARB_CKEN>;
> + clock-names = "apb", "smi";
> + };
> --
> 2.18.0
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Yong Wu <yong.wu@mediatek.com>,
Honghui Zhang <honghui.zhang@mediatek.com>
Cc: youlin.pei@mediatek.com, devicetree@vger.kernel.org,
Nicolas Boichat <drinkcat@chromium.org>,
srv_heupstream@mediatek.com, Fabien Parent <fparent@baylibre.com>,
Robin Murphy <robin.murphy@arm.com>,
Joerg Roedel <joro@8bytes.org>,
linux-kernel@vger.kernel.org, Tomasz Figa <tfiga@google.com>,
iommu@lists.linux-foundation.org,
Rob Herring <robh+dt@kernel.org>,
linux-mediatek@lists.infradead.org,
Matthias Brugger <matthias.bgg@gmail.com>,
ming-fan.chen@mediatek.com, anan.sun@mediatek.com,
Will Deacon <will@kernel.org>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v4 1/3] dt-bindings: memory: mediatek: Convert SMI to DT schema
Date: Sat, 31 Oct 2020 12:36:23 +0100 [thread overview]
Message-ID: <20201031113623.GA4019@kozik-lap> (raw)
In-Reply-To: <20201030091254.26382-2-yong.wu@mediatek.com>
On Fri, Oct 30, 2020 at 05:12:52PM +0800, Yong Wu wrote:
> Convert MediaTek SMI to DT schema.
>
> CC: Fabien Parent <fparent@baylibre.com>
> CC: Ming-Fan Chen <ming-fan.chen@mediatek.com>
> CC: Matthias Brugger <matthias.bgg@gmail.com>
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> ---
> .../mediatek,smi-common.txt | 50 -------
> .../mediatek,smi-common.yaml | 140 ++++++++++++++++++
> .../memory-controllers/mediatek,smi-larb.txt | 50 -------
> .../memory-controllers/mediatek,smi-larb.yaml | 129 ++++++++++++++++
> 4 files changed, 269 insertions(+), 100 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
+Cc Honghui Zhang,
Your Ack is needed as you contributed descriptions to the bindings and
work is being relicensed to GPL-2.0-only OR BSD-2-Clause.
Best regards,
Krzysztof
> create mode 100644 Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
> delete mode 100644 Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
> create mode 100644 Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
>
> diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
> deleted file mode 100644
> index dbafffe3f41e..000000000000
> --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
> +++ /dev/null
> @@ -1,50 +0,0 @@
> -SMI (Smart Multimedia Interface) Common
> -
> -The hardware block diagram please check bindings/iommu/mediatek,iommu.txt
> -
> -Mediatek SMI have two generations of HW architecture, here is the list
> -which generation the SoCs use:
> -generation 1: mt2701 and mt7623.
> -generation 2: mt2712, mt6779, mt8167, mt8173 and mt8183.
> -
> -There's slight differences between the two SMI, for generation 2, the
> -register which control the iommu port is at each larb's register base. But
> -for generation 1, the register is at smi ao base(smi always on register
> -base). Besides that, the smi async clock should be prepared and enabled for
> -SMI generation 1 to transform the smi clock into emi clock domain, but that is
> -not needed for SMI generation 2.
> -
> -Required properties:
> -- compatible : must be one of :
> - "mediatek,mt2701-smi-common"
> - "mediatek,mt2712-smi-common"
> - "mediatek,mt6779-smi-common"
> - "mediatek,mt7623-smi-common", "mediatek,mt2701-smi-common"
> - "mediatek,mt8167-smi-common"
> - "mediatek,mt8173-smi-common"
> - "mediatek,mt8183-smi-common"
> -- reg : the register and size of the SMI block.
> -- power-domains : a phandle to the power domain of this local arbiter.
> -- clocks : Must contain an entry for each entry in clock-names.
> -- clock-names : must contain 3 entries for generation 1 smi HW and 2 entries
> - for generation 2 smi HW as follows:
> - - "apb" : Advanced Peripheral Bus clock, It's the clock for setting
> - the register.
> - - "smi" : It's the clock for transfer data and command.
> - They may be the same if both source clocks are the same.
> - - "async" : asynchronous clock, it help transform the smi clock into the emi
> - clock domain, this clock is only needed by generation 1 smi HW.
> - and these 2 option clocks for generation 2 smi HW:
> - - "gals0": the path0 clock of GALS(Global Async Local Sync).
> - - "gals1": the path1 clock of GALS(Global Async Local Sync).
> - Here is the list which has this GALS: mt6779 and mt8183.
> -
> -Example:
> - smi_common: smi@14022000 {
> - compatible = "mediatek,mt8173-smi-common";
> - reg = <0 0x14022000 0 0x1000>;
> - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
> - clocks = <&mmsys CLK_MM_SMI_COMMON>,
> - <&mmsys CLK_MM_SMI_COMMON>;
> - clock-names = "apb", "smi";
> - };
> diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
> new file mode 100644
> index 000000000000..e050a0c2aed6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
> @@ -0,0 +1,140 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (c) 2020 MediaTek Inc.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/memory-controllers/mediatek,smi-common.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: SMI (Smart Multimedia Interface) Common
> +
> +maintainers:
> + - Yong Wu <yong.wu@mediatek.com>
> +
> +description: |+
> + The hardware block diagram please check bindings/iommu/mediatek,iommu.yaml
> +
> + MediaTek SMI have two generations of HW architecture, here is the list
> + which generation the SoCs use:
> + generation 1: mt2701 and mt7623.
> + generation 2: mt2712, mt6779, mt8167, mt8173 and mt8183.
> +
> + There's slight differences between the two SMI, for generation 2, the
> + register which control the iommu port is at each larb's register base. But
> + for generation 1, the register is at smi ao base(smi always on register
> + base). Besides that, the smi async clock should be prepared and enabled for
> + SMI generation 1 to transform the smi clock into emi clock domain, but that is
> + not needed for SMI generation 2.
> +
> +properties:
> + compatible:
> + oneOf:
> + - enum:
> + - mediatek,mt2701-smi-common
> + - mediatek,mt2712-smi-common
> + - mediatek,mt6779-smi-common
> + - mediatek,mt8167-smi-common
> + - mediatek,mt8173-smi-common
> + - mediatek,mt8183-smi-common
> +
> + - description: for mt7623
> + items:
> + - const: mediatek,mt7623-smi-common
> + - const: mediatek,mt2701-smi-common
> +
> + reg:
> + maxItems: 1
> +
> + power-domains:
> + maxItems: 1
> +
> + clocks:
> + description: |
> + apb and smi are mandatory. the async is only for generation 1 smi HW.
> + gals(global async local sync) also is optional, see below.
> + minItems: 2
> + maxItems: 4
> + items:
> + - description: apb is Advanced Peripheral Bus clock, It's the clock for
> + setting the register.
> + - description: smi is the clock for transfer data and command.
> + - description: async is asynchronous clock, it help transform the smi clock
> + into the emi clock domain.
> + - description: gals0 is the path0 clock of gals.
> + - description: gals1 is the path1 clock of gals.
> +
> + clock-names:
> + minItems: 2
> + maxItems: 4
> +
> +required:
> + - compatible
> + - reg
> + - power-domains
> + - clocks
> + - clock-names
> +
> +allOf:
> + - if: #only for gen1 HW
> + properties:
> + compatible:
> + contains:
> + enum:
> + - mediatek,mt2701-smi-common
> + then:
> + properties:
> + clock:
> + items:
> + minItems: 3
> + maxItems: 3
> + clock-names:
> + items:
> + - const: apb
> + - const: smi
> + - const: async
> +
> + - if: #for gen2 HW that have gals
> + properties:
> + compatible:
> + enum:
> + - mediatek,mt6779-smi-common
> + - mediatek,mt8183-smi-common
> +
> + then:
> + properties:
> + clock:
> + items:
> + minItems: 4
> + maxItems: 4
> + clock-names:
> + items:
> + - const: apb
> + - const: smi
> + - const: gals0
> + - const: gals1
> +
> + else: #for gen2 HW that don't have gals
> + properties:
> + clock:
> + items:
> + minItems: 2
> + maxItems: 2
> + clock-names:
> + items:
> + - const: apb
> + - const: smi
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/mt8173-clk.h>
> + #include <dt-bindings/power/mt8173-power.h>
> +
> + smi_common: smi@14022000 {
> + compatible = "mediatek,mt8173-smi-common";
> + reg = <0x14022000 0x1000>;
> + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
> + clocks = <&mmsys CLK_MM_SMI_COMMON>,
> + <&mmsys CLK_MM_SMI_COMMON>;
> + clock-names = "apb", "smi";
> + };
> diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
> deleted file mode 100644
> index 0c5de12b5496..000000000000
> --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
> +++ /dev/null
> @@ -1,50 +0,0 @@
> -SMI (Smart Multimedia Interface) Local Arbiter
> -
> -The hardware block diagram please check bindings/iommu/mediatek,iommu.txt
> -
> -Required properties:
> -- compatible : must be one of :
> - "mediatek,mt2701-smi-larb"
> - "mediatek,mt2712-smi-larb"
> - "mediatek,mt6779-smi-larb"
> - "mediatek,mt7623-smi-larb", "mediatek,mt2701-smi-larb"
> - "mediatek,mt8167-smi-larb"
> - "mediatek,mt8173-smi-larb"
> - "mediatek,mt8183-smi-larb"
> -- reg : the register and size of this local arbiter.
> -- mediatek,smi : a phandle to the smi_common node.
> -- power-domains : a phandle to the power domain of this local arbiter.
> -- clocks : Must contain an entry for each entry in clock-names.
> -- clock-names: must contain 2 entries, as follows:
> - - "apb" : Advanced Peripheral Bus clock, It's the clock for setting
> - the register.
> - - "smi" : It's the clock for transfer data and command.
> - and this optional clock name:
> - - "gals": the clock for GALS(Global Async Local Sync).
> - Here is the list which has this GALS: mt8183.
> -
> -Required property for mt2701, mt2712, mt6779, mt7623 and mt8167:
> -- mediatek,larb-id :the hardware id of this larb.
> -
> -Example:
> - larb1: larb@16010000 {
> - compatible = "mediatek,mt8173-smi-larb";
> - reg = <0 0x16010000 0 0x1000>;
> - mediatek,smi = <&smi_common>;
> - power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>;
> - clocks = <&vdecsys CLK_VDEC_CKEN>,
> - <&vdecsys CLK_VDEC_LARB_CKEN>;
> - clock-names = "apb", "smi";
> - };
> -
> -Example for mt2701:
> - larb0: larb@14010000 {
> - compatible = "mediatek,mt2701-smi-larb";
> - reg = <0 0x14010000 0 0x1000>;
> - mediatek,smi = <&smi_common>;
> - mediatek,larb-id = <0>;
> - clocks = <&mmsys CLK_MM_SMI_LARB0>,
> - <&mmsys CLK_MM_SMI_LARB0>;
> - clock-names = "apb", "smi";
> - power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
> - };
> diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
> new file mode 100644
> index 000000000000..a11a105e872f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
> @@ -0,0 +1,129 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (c) 2020 MediaTek Inc.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/memory-controllers/mediatek,smi-larb.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: SMI (Smart Multimedia Interface) Local Arbiter
> +
> +maintainers:
> + - Yong Wu <yong.wu@mediatek.com>
> +
> +description: |+
> + The hardware block diagram please check bindings/iommu/mediatek,iommu.yaml
> +
> +properties:
> + compatible:
> + oneOf:
> + - enum:
> + - mediatek,mt2701-smi-larb
> + - mediatek,mt2712-smi-larb
> + - mediatek,mt6779-smi-larb
> + - mediatek,mt8167-smi-larb
> + - mediatek,mt8173-smi-larb
> + - mediatek,mt8183-smi-larb
> +
> + - description: for mt7623
> + items:
> + - const: mediatek,mt7623-smi-larb
> + - const: mediatek,mt2701-smi-larb
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + description: |
> + apb and smi are mandatory. gals(global async local sync) is optional.
> + minItems: 2
> + maxItems: 3
> + items:
> + - description: apb is Advanced Peripheral Bus clock, It's the clock for
> + setting the register.
> + - description: smi is the clock for transfer data and command.
> + - description: the clock for gals.
> +
> + clock-names:
> + minItems: 2
> + maxItems: 3
> +
> + power-domains:
> + maxItems: 1
> +
> + mediatek,smi:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description: a phandle to the smi_common node.
> +
> + mediatek,larb-id:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0
> + maximum: 31
> + description: the hardware id of this larb.
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> + - power-domains
> +
> +allOf:
> + - if: # HW has gals
> + properties:
> + compatible:
> + enum:
> + - mediatek,mt8183-smi-larb
> +
> + then:
> + properties:
> + clock:
> + items:
> + minItems: 3
> + maxItems: 3
> + clock-names:
> + items:
> + - const: apb
> + - const: smi
> + - const: gals
> +
> + else:
> + properties:
> + clock:
> + items:
> + minItems: 2
> + maxItems: 2
> + clock-names:
> + items:
> + - const: apb
> + - const: smi
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - mediatek,mt2701-smi-larb
> + - mediatek,mt2712-smi-larb
> + - mediatek,mt6779-smi-larb
> + - mediatek,mt8167-smi-larb
> +
> + then:
> + required:
> + - mediatek,larb-id
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/mt8173-clk.h>
> + #include <dt-bindings/power/mt8173-power.h>
> +
> + larb1: larb@16010000 {
> + compatible = "mediatek,mt8173-smi-larb";
> + reg = <0x16010000 0x1000>;
> + mediatek,smi = <&smi_common>;
> + power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>;
> + clocks = <&vdecsys CLK_VDEC_CKEN>,
> + <&vdecsys CLK_VDEC_LARB_CKEN>;
> + clock-names = "apb", "smi";
> + };
> --
> 2.18.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Yong Wu <yong.wu@mediatek.com>,
Honghui Zhang <honghui.zhang@mediatek.com>
Cc: youlin.pei@mediatek.com, devicetree@vger.kernel.org,
Nicolas Boichat <drinkcat@chromium.org>,
srv_heupstream@mediatek.com, Fabien Parent <fparent@baylibre.com>,
Robin Murphy <robin.murphy@arm.com>,
Joerg Roedel <joro@8bytes.org>,
linux-kernel@vger.kernel.org, Tomasz Figa <tfiga@google.com>,
iommu@lists.linux-foundation.org,
Rob Herring <robh+dt@kernel.org>,
linux-mediatek@lists.infradead.org,
Matthias Brugger <matthias.bgg@gmail.com>,
ming-fan.chen@mediatek.com, anan.sun@mediatek.com,
Will Deacon <will@kernel.org>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v4 1/3] dt-bindings: memory: mediatek: Convert SMI to DT schema
Date: Sat, 31 Oct 2020 12:36:23 +0100 [thread overview]
Message-ID: <20201031113623.GA4019@kozik-lap> (raw)
In-Reply-To: <20201030091254.26382-2-yong.wu@mediatek.com>
On Fri, Oct 30, 2020 at 05:12:52PM +0800, Yong Wu wrote:
> Convert MediaTek SMI to DT schema.
>
> CC: Fabien Parent <fparent@baylibre.com>
> CC: Ming-Fan Chen <ming-fan.chen@mediatek.com>
> CC: Matthias Brugger <matthias.bgg@gmail.com>
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> ---
> .../mediatek,smi-common.txt | 50 -------
> .../mediatek,smi-common.yaml | 140 ++++++++++++++++++
> .../memory-controllers/mediatek,smi-larb.txt | 50 -------
> .../memory-controllers/mediatek,smi-larb.yaml | 129 ++++++++++++++++
> 4 files changed, 269 insertions(+), 100 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
+Cc Honghui Zhang,
Your Ack is needed as you contributed descriptions to the bindings and
work is being relicensed to GPL-2.0-only OR BSD-2-Clause.
Best regards,
Krzysztof
> create mode 100644 Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
> delete mode 100644 Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
> create mode 100644 Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
>
> diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
> deleted file mode 100644
> index dbafffe3f41e..000000000000
> --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
> +++ /dev/null
> @@ -1,50 +0,0 @@
> -SMI (Smart Multimedia Interface) Common
> -
> -The hardware block diagram please check bindings/iommu/mediatek,iommu.txt
> -
> -Mediatek SMI have two generations of HW architecture, here is the list
> -which generation the SoCs use:
> -generation 1: mt2701 and mt7623.
> -generation 2: mt2712, mt6779, mt8167, mt8173 and mt8183.
> -
> -There's slight differences between the two SMI, for generation 2, the
> -register which control the iommu port is at each larb's register base. But
> -for generation 1, the register is at smi ao base(smi always on register
> -base). Besides that, the smi async clock should be prepared and enabled for
> -SMI generation 1 to transform the smi clock into emi clock domain, but that is
> -not needed for SMI generation 2.
> -
> -Required properties:
> -- compatible : must be one of :
> - "mediatek,mt2701-smi-common"
> - "mediatek,mt2712-smi-common"
> - "mediatek,mt6779-smi-common"
> - "mediatek,mt7623-smi-common", "mediatek,mt2701-smi-common"
> - "mediatek,mt8167-smi-common"
> - "mediatek,mt8173-smi-common"
> - "mediatek,mt8183-smi-common"
> -- reg : the register and size of the SMI block.
> -- power-domains : a phandle to the power domain of this local arbiter.
> -- clocks : Must contain an entry for each entry in clock-names.
> -- clock-names : must contain 3 entries for generation 1 smi HW and 2 entries
> - for generation 2 smi HW as follows:
> - - "apb" : Advanced Peripheral Bus clock, It's the clock for setting
> - the register.
> - - "smi" : It's the clock for transfer data and command.
> - They may be the same if both source clocks are the same.
> - - "async" : asynchronous clock, it help transform the smi clock into the emi
> - clock domain, this clock is only needed by generation 1 smi HW.
> - and these 2 option clocks for generation 2 smi HW:
> - - "gals0": the path0 clock of GALS(Global Async Local Sync).
> - - "gals1": the path1 clock of GALS(Global Async Local Sync).
> - Here is the list which has this GALS: mt6779 and mt8183.
> -
> -Example:
> - smi_common: smi@14022000 {
> - compatible = "mediatek,mt8173-smi-common";
> - reg = <0 0x14022000 0 0x1000>;
> - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
> - clocks = <&mmsys CLK_MM_SMI_COMMON>,
> - <&mmsys CLK_MM_SMI_COMMON>;
> - clock-names = "apb", "smi";
> - };
> diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
> new file mode 100644
> index 000000000000..e050a0c2aed6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
> @@ -0,0 +1,140 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (c) 2020 MediaTek Inc.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/memory-controllers/mediatek,smi-common.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: SMI (Smart Multimedia Interface) Common
> +
> +maintainers:
> + - Yong Wu <yong.wu@mediatek.com>
> +
> +description: |+
> + The hardware block diagram please check bindings/iommu/mediatek,iommu.yaml
> +
> + MediaTek SMI have two generations of HW architecture, here is the list
> + which generation the SoCs use:
> + generation 1: mt2701 and mt7623.
> + generation 2: mt2712, mt6779, mt8167, mt8173 and mt8183.
> +
> + There's slight differences between the two SMI, for generation 2, the
> + register which control the iommu port is at each larb's register base. But
> + for generation 1, the register is at smi ao base(smi always on register
> + base). Besides that, the smi async clock should be prepared and enabled for
> + SMI generation 1 to transform the smi clock into emi clock domain, but that is
> + not needed for SMI generation 2.
> +
> +properties:
> + compatible:
> + oneOf:
> + - enum:
> + - mediatek,mt2701-smi-common
> + - mediatek,mt2712-smi-common
> + - mediatek,mt6779-smi-common
> + - mediatek,mt8167-smi-common
> + - mediatek,mt8173-smi-common
> + - mediatek,mt8183-smi-common
> +
> + - description: for mt7623
> + items:
> + - const: mediatek,mt7623-smi-common
> + - const: mediatek,mt2701-smi-common
> +
> + reg:
> + maxItems: 1
> +
> + power-domains:
> + maxItems: 1
> +
> + clocks:
> + description: |
> + apb and smi are mandatory. the async is only for generation 1 smi HW.
> + gals(global async local sync) also is optional, see below.
> + minItems: 2
> + maxItems: 4
> + items:
> + - description: apb is Advanced Peripheral Bus clock, It's the clock for
> + setting the register.
> + - description: smi is the clock for transfer data and command.
> + - description: async is asynchronous clock, it help transform the smi clock
> + into the emi clock domain.
> + - description: gals0 is the path0 clock of gals.
> + - description: gals1 is the path1 clock of gals.
> +
> + clock-names:
> + minItems: 2
> + maxItems: 4
> +
> +required:
> + - compatible
> + - reg
> + - power-domains
> + - clocks
> + - clock-names
> +
> +allOf:
> + - if: #only for gen1 HW
> + properties:
> + compatible:
> + contains:
> + enum:
> + - mediatek,mt2701-smi-common
> + then:
> + properties:
> + clock:
> + items:
> + minItems: 3
> + maxItems: 3
> + clock-names:
> + items:
> + - const: apb
> + - const: smi
> + - const: async
> +
> + - if: #for gen2 HW that have gals
> + properties:
> + compatible:
> + enum:
> + - mediatek,mt6779-smi-common
> + - mediatek,mt8183-smi-common
> +
> + then:
> + properties:
> + clock:
> + items:
> + minItems: 4
> + maxItems: 4
> + clock-names:
> + items:
> + - const: apb
> + - const: smi
> + - const: gals0
> + - const: gals1
> +
> + else: #for gen2 HW that don't have gals
> + properties:
> + clock:
> + items:
> + minItems: 2
> + maxItems: 2
> + clock-names:
> + items:
> + - const: apb
> + - const: smi
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/mt8173-clk.h>
> + #include <dt-bindings/power/mt8173-power.h>
> +
> + smi_common: smi@14022000 {
> + compatible = "mediatek,mt8173-smi-common";
> + reg = <0x14022000 0x1000>;
> + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
> + clocks = <&mmsys CLK_MM_SMI_COMMON>,
> + <&mmsys CLK_MM_SMI_COMMON>;
> + clock-names = "apb", "smi";
> + };
> diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
> deleted file mode 100644
> index 0c5de12b5496..000000000000
> --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
> +++ /dev/null
> @@ -1,50 +0,0 @@
> -SMI (Smart Multimedia Interface) Local Arbiter
> -
> -The hardware block diagram please check bindings/iommu/mediatek,iommu.txt
> -
> -Required properties:
> -- compatible : must be one of :
> - "mediatek,mt2701-smi-larb"
> - "mediatek,mt2712-smi-larb"
> - "mediatek,mt6779-smi-larb"
> - "mediatek,mt7623-smi-larb", "mediatek,mt2701-smi-larb"
> - "mediatek,mt8167-smi-larb"
> - "mediatek,mt8173-smi-larb"
> - "mediatek,mt8183-smi-larb"
> -- reg : the register and size of this local arbiter.
> -- mediatek,smi : a phandle to the smi_common node.
> -- power-domains : a phandle to the power domain of this local arbiter.
> -- clocks : Must contain an entry for each entry in clock-names.
> -- clock-names: must contain 2 entries, as follows:
> - - "apb" : Advanced Peripheral Bus clock, It's the clock for setting
> - the register.
> - - "smi" : It's the clock for transfer data and command.
> - and this optional clock name:
> - - "gals": the clock for GALS(Global Async Local Sync).
> - Here is the list which has this GALS: mt8183.
> -
> -Required property for mt2701, mt2712, mt6779, mt7623 and mt8167:
> -- mediatek,larb-id :the hardware id of this larb.
> -
> -Example:
> - larb1: larb@16010000 {
> - compatible = "mediatek,mt8173-smi-larb";
> - reg = <0 0x16010000 0 0x1000>;
> - mediatek,smi = <&smi_common>;
> - power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>;
> - clocks = <&vdecsys CLK_VDEC_CKEN>,
> - <&vdecsys CLK_VDEC_LARB_CKEN>;
> - clock-names = "apb", "smi";
> - };
> -
> -Example for mt2701:
> - larb0: larb@14010000 {
> - compatible = "mediatek,mt2701-smi-larb";
> - reg = <0 0x14010000 0 0x1000>;
> - mediatek,smi = <&smi_common>;
> - mediatek,larb-id = <0>;
> - clocks = <&mmsys CLK_MM_SMI_LARB0>,
> - <&mmsys CLK_MM_SMI_LARB0>;
> - clock-names = "apb", "smi";
> - power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
> - };
> diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
> new file mode 100644
> index 000000000000..a11a105e872f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
> @@ -0,0 +1,129 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (c) 2020 MediaTek Inc.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/memory-controllers/mediatek,smi-larb.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: SMI (Smart Multimedia Interface) Local Arbiter
> +
> +maintainers:
> + - Yong Wu <yong.wu@mediatek.com>
> +
> +description: |+
> + The hardware block diagram please check bindings/iommu/mediatek,iommu.yaml
> +
> +properties:
> + compatible:
> + oneOf:
> + - enum:
> + - mediatek,mt2701-smi-larb
> + - mediatek,mt2712-smi-larb
> + - mediatek,mt6779-smi-larb
> + - mediatek,mt8167-smi-larb
> + - mediatek,mt8173-smi-larb
> + - mediatek,mt8183-smi-larb
> +
> + - description: for mt7623
> + items:
> + - const: mediatek,mt7623-smi-larb
> + - const: mediatek,mt2701-smi-larb
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + description: |
> + apb and smi are mandatory. gals(global async local sync) is optional.
> + minItems: 2
> + maxItems: 3
> + items:
> + - description: apb is Advanced Peripheral Bus clock, It's the clock for
> + setting the register.
> + - description: smi is the clock for transfer data and command.
> + - description: the clock for gals.
> +
> + clock-names:
> + minItems: 2
> + maxItems: 3
> +
> + power-domains:
> + maxItems: 1
> +
> + mediatek,smi:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description: a phandle to the smi_common node.
> +
> + mediatek,larb-id:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0
> + maximum: 31
> + description: the hardware id of this larb.
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> + - power-domains
> +
> +allOf:
> + - if: # HW has gals
> + properties:
> + compatible:
> + enum:
> + - mediatek,mt8183-smi-larb
> +
> + then:
> + properties:
> + clock:
> + items:
> + minItems: 3
> + maxItems: 3
> + clock-names:
> + items:
> + - const: apb
> + - const: smi
> + - const: gals
> +
> + else:
> + properties:
> + clock:
> + items:
> + minItems: 2
> + maxItems: 2
> + clock-names:
> + items:
> + - const: apb
> + - const: smi
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - mediatek,mt2701-smi-larb
> + - mediatek,mt2712-smi-larb
> + - mediatek,mt6779-smi-larb
> + - mediatek,mt8167-smi-larb
> +
> + then:
> + required:
> + - mediatek,larb-id
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/mt8173-clk.h>
> + #include <dt-bindings/power/mt8173-power.h>
> +
> + larb1: larb@16010000 {
> + compatible = "mediatek,mt8173-smi-larb";
> + reg = <0x16010000 0x1000>;
> + mediatek,smi = <&smi_common>;
> + power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>;
> + clocks = <&vdecsys CLK_VDEC_CKEN>,
> + <&vdecsys CLK_VDEC_LARB_CKEN>;
> + clock-names = "apb", "smi";
> + };
> --
> 2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Yong Wu <yong.wu@mediatek.com>,
Honghui Zhang <honghui.zhang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>,
Rob Herring <robh+dt@kernel.org>, Joerg Roedel <joro@8bytes.org>,
Robin Murphy <robin.murphy@arm.com>,
Will Deacon <will@kernel.org>, Tomasz Figa <tfiga@google.com>,
linux-mediatek@lists.infradead.org, srv_heupstream@mediatek.com,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
iommu@lists.linux-foundation.org, youlin.pei@mediatek.com,
Nicolas Boichat <drinkcat@chromium.org>,
anan.sun@mediatek.com, ming-fan.chen@mediatek.com,
Fabien Parent <fparent@baylibre.com>
Subject: Re: [PATCH v4 1/3] dt-bindings: memory: mediatek: Convert SMI to DT schema
Date: Sat, 31 Oct 2020 12:36:23 +0100 [thread overview]
Message-ID: <20201031113623.GA4019@kozik-lap> (raw)
In-Reply-To: <20201030091254.26382-2-yong.wu@mediatek.com>
On Fri, Oct 30, 2020 at 05:12:52PM +0800, Yong Wu wrote:
> Convert MediaTek SMI to DT schema.
>
> CC: Fabien Parent <fparent@baylibre.com>
> CC: Ming-Fan Chen <ming-fan.chen@mediatek.com>
> CC: Matthias Brugger <matthias.bgg@gmail.com>
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> ---
> .../mediatek,smi-common.txt | 50 -------
> .../mediatek,smi-common.yaml | 140 ++++++++++++++++++
> .../memory-controllers/mediatek,smi-larb.txt | 50 -------
> .../memory-controllers/mediatek,smi-larb.yaml | 129 ++++++++++++++++
> 4 files changed, 269 insertions(+), 100 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
+Cc Honghui Zhang,
Your Ack is needed as you contributed descriptions to the bindings and
work is being relicensed to GPL-2.0-only OR BSD-2-Clause.
Best regards,
Krzysztof
> create mode 100644 Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
> delete mode 100644 Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
> create mode 100644 Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
>
> diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
> deleted file mode 100644
> index dbafffe3f41e..000000000000
> --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
> +++ /dev/null
> @@ -1,50 +0,0 @@
> -SMI (Smart Multimedia Interface) Common
> -
> -The hardware block diagram please check bindings/iommu/mediatek,iommu.txt
> -
> -Mediatek SMI have two generations of HW architecture, here is the list
> -which generation the SoCs use:
> -generation 1: mt2701 and mt7623.
> -generation 2: mt2712, mt6779, mt8167, mt8173 and mt8183.
> -
> -There's slight differences between the two SMI, for generation 2, the
> -register which control the iommu port is at each larb's register base. But
> -for generation 1, the register is at smi ao base(smi always on register
> -base). Besides that, the smi async clock should be prepared and enabled for
> -SMI generation 1 to transform the smi clock into emi clock domain, but that is
> -not needed for SMI generation 2.
> -
> -Required properties:
> -- compatible : must be one of :
> - "mediatek,mt2701-smi-common"
> - "mediatek,mt2712-smi-common"
> - "mediatek,mt6779-smi-common"
> - "mediatek,mt7623-smi-common", "mediatek,mt2701-smi-common"
> - "mediatek,mt8167-smi-common"
> - "mediatek,mt8173-smi-common"
> - "mediatek,mt8183-smi-common"
> -- reg : the register and size of the SMI block.
> -- power-domains : a phandle to the power domain of this local arbiter.
> -- clocks : Must contain an entry for each entry in clock-names.
> -- clock-names : must contain 3 entries for generation 1 smi HW and 2 entries
> - for generation 2 smi HW as follows:
> - - "apb" : Advanced Peripheral Bus clock, It's the clock for setting
> - the register.
> - - "smi" : It's the clock for transfer data and command.
> - They may be the same if both source clocks are the same.
> - - "async" : asynchronous clock, it help transform the smi clock into the emi
> - clock domain, this clock is only needed by generation 1 smi HW.
> - and these 2 option clocks for generation 2 smi HW:
> - - "gals0": the path0 clock of GALS(Global Async Local Sync).
> - - "gals1": the path1 clock of GALS(Global Async Local Sync).
> - Here is the list which has this GALS: mt6779 and mt8183.
> -
> -Example:
> - smi_common: smi@14022000 {
> - compatible = "mediatek,mt8173-smi-common";
> - reg = <0 0x14022000 0 0x1000>;
> - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
> - clocks = <&mmsys CLK_MM_SMI_COMMON>,
> - <&mmsys CLK_MM_SMI_COMMON>;
> - clock-names = "apb", "smi";
> - };
> diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
> new file mode 100644
> index 000000000000..e050a0c2aed6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
> @@ -0,0 +1,140 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (c) 2020 MediaTek Inc.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/memory-controllers/mediatek,smi-common.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: SMI (Smart Multimedia Interface) Common
> +
> +maintainers:
> + - Yong Wu <yong.wu@mediatek.com>
> +
> +description: |+
> + The hardware block diagram please check bindings/iommu/mediatek,iommu.yaml
> +
> + MediaTek SMI have two generations of HW architecture, here is the list
> + which generation the SoCs use:
> + generation 1: mt2701 and mt7623.
> + generation 2: mt2712, mt6779, mt8167, mt8173 and mt8183.
> +
> + There's slight differences between the two SMI, for generation 2, the
> + register which control the iommu port is at each larb's register base. But
> + for generation 1, the register is at smi ao base(smi always on register
> + base). Besides that, the smi async clock should be prepared and enabled for
> + SMI generation 1 to transform the smi clock into emi clock domain, but that is
> + not needed for SMI generation 2.
> +
> +properties:
> + compatible:
> + oneOf:
> + - enum:
> + - mediatek,mt2701-smi-common
> + - mediatek,mt2712-smi-common
> + - mediatek,mt6779-smi-common
> + - mediatek,mt8167-smi-common
> + - mediatek,mt8173-smi-common
> + - mediatek,mt8183-smi-common
> +
> + - description: for mt7623
> + items:
> + - const: mediatek,mt7623-smi-common
> + - const: mediatek,mt2701-smi-common
> +
> + reg:
> + maxItems: 1
> +
> + power-domains:
> + maxItems: 1
> +
> + clocks:
> + description: |
> + apb and smi are mandatory. the async is only for generation 1 smi HW.
> + gals(global async local sync) also is optional, see below.
> + minItems: 2
> + maxItems: 4
> + items:
> + - description: apb is Advanced Peripheral Bus clock, It's the clock for
> + setting the register.
> + - description: smi is the clock for transfer data and command.
> + - description: async is asynchronous clock, it help transform the smi clock
> + into the emi clock domain.
> + - description: gals0 is the path0 clock of gals.
> + - description: gals1 is the path1 clock of gals.
> +
> + clock-names:
> + minItems: 2
> + maxItems: 4
> +
> +required:
> + - compatible
> + - reg
> + - power-domains
> + - clocks
> + - clock-names
> +
> +allOf:
> + - if: #only for gen1 HW
> + properties:
> + compatible:
> + contains:
> + enum:
> + - mediatek,mt2701-smi-common
> + then:
> + properties:
> + clock:
> + items:
> + minItems: 3
> + maxItems: 3
> + clock-names:
> + items:
> + - const: apb
> + - const: smi
> + - const: async
> +
> + - if: #for gen2 HW that have gals
> + properties:
> + compatible:
> + enum:
> + - mediatek,mt6779-smi-common
> + - mediatek,mt8183-smi-common
> +
> + then:
> + properties:
> + clock:
> + items:
> + minItems: 4
> + maxItems: 4
> + clock-names:
> + items:
> + - const: apb
> + - const: smi
> + - const: gals0
> + - const: gals1
> +
> + else: #for gen2 HW that don't have gals
> + properties:
> + clock:
> + items:
> + minItems: 2
> + maxItems: 2
> + clock-names:
> + items:
> + - const: apb
> + - const: smi
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/mt8173-clk.h>
> + #include <dt-bindings/power/mt8173-power.h>
> +
> + smi_common: smi@14022000 {
> + compatible = "mediatek,mt8173-smi-common";
> + reg = <0x14022000 0x1000>;
> + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
> + clocks = <&mmsys CLK_MM_SMI_COMMON>,
> + <&mmsys CLK_MM_SMI_COMMON>;
> + clock-names = "apb", "smi";
> + };
> diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
> deleted file mode 100644
> index 0c5de12b5496..000000000000
> --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
> +++ /dev/null
> @@ -1,50 +0,0 @@
> -SMI (Smart Multimedia Interface) Local Arbiter
> -
> -The hardware block diagram please check bindings/iommu/mediatek,iommu.txt
> -
> -Required properties:
> -- compatible : must be one of :
> - "mediatek,mt2701-smi-larb"
> - "mediatek,mt2712-smi-larb"
> - "mediatek,mt6779-smi-larb"
> - "mediatek,mt7623-smi-larb", "mediatek,mt2701-smi-larb"
> - "mediatek,mt8167-smi-larb"
> - "mediatek,mt8173-smi-larb"
> - "mediatek,mt8183-smi-larb"
> -- reg : the register and size of this local arbiter.
> -- mediatek,smi : a phandle to the smi_common node.
> -- power-domains : a phandle to the power domain of this local arbiter.
> -- clocks : Must contain an entry for each entry in clock-names.
> -- clock-names: must contain 2 entries, as follows:
> - - "apb" : Advanced Peripheral Bus clock, It's the clock for setting
> - the register.
> - - "smi" : It's the clock for transfer data and command.
> - and this optional clock name:
> - - "gals": the clock for GALS(Global Async Local Sync).
> - Here is the list which has this GALS: mt8183.
> -
> -Required property for mt2701, mt2712, mt6779, mt7623 and mt8167:
> -- mediatek,larb-id :the hardware id of this larb.
> -
> -Example:
> - larb1: larb@16010000 {
> - compatible = "mediatek,mt8173-smi-larb";
> - reg = <0 0x16010000 0 0x1000>;
> - mediatek,smi = <&smi_common>;
> - power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>;
> - clocks = <&vdecsys CLK_VDEC_CKEN>,
> - <&vdecsys CLK_VDEC_LARB_CKEN>;
> - clock-names = "apb", "smi";
> - };
> -
> -Example for mt2701:
> - larb0: larb@14010000 {
> - compatible = "mediatek,mt2701-smi-larb";
> - reg = <0 0x14010000 0 0x1000>;
> - mediatek,smi = <&smi_common>;
> - mediatek,larb-id = <0>;
> - clocks = <&mmsys CLK_MM_SMI_LARB0>,
> - <&mmsys CLK_MM_SMI_LARB0>;
> - clock-names = "apb", "smi";
> - power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
> - };
> diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
> new file mode 100644
> index 000000000000..a11a105e872f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
> @@ -0,0 +1,129 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (c) 2020 MediaTek Inc.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/memory-controllers/mediatek,smi-larb.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: SMI (Smart Multimedia Interface) Local Arbiter
> +
> +maintainers:
> + - Yong Wu <yong.wu@mediatek.com>
> +
> +description: |+
> + The hardware block diagram please check bindings/iommu/mediatek,iommu.yaml
> +
> +properties:
> + compatible:
> + oneOf:
> + - enum:
> + - mediatek,mt2701-smi-larb
> + - mediatek,mt2712-smi-larb
> + - mediatek,mt6779-smi-larb
> + - mediatek,mt8167-smi-larb
> + - mediatek,mt8173-smi-larb
> + - mediatek,mt8183-smi-larb
> +
> + - description: for mt7623
> + items:
> + - const: mediatek,mt7623-smi-larb
> + - const: mediatek,mt2701-smi-larb
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + description: |
> + apb and smi are mandatory. gals(global async local sync) is optional.
> + minItems: 2
> + maxItems: 3
> + items:
> + - description: apb is Advanced Peripheral Bus clock, It's the clock for
> + setting the register.
> + - description: smi is the clock for transfer data and command.
> + - description: the clock for gals.
> +
> + clock-names:
> + minItems: 2
> + maxItems: 3
> +
> + power-domains:
> + maxItems: 1
> +
> + mediatek,smi:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description: a phandle to the smi_common node.
> +
> + mediatek,larb-id:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0
> + maximum: 31
> + description: the hardware id of this larb.
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> + - power-domains
> +
> +allOf:
> + - if: # HW has gals
> + properties:
> + compatible:
> + enum:
> + - mediatek,mt8183-smi-larb
> +
> + then:
> + properties:
> + clock:
> + items:
> + minItems: 3
> + maxItems: 3
> + clock-names:
> + items:
> + - const: apb
> + - const: smi
> + - const: gals
> +
> + else:
> + properties:
> + clock:
> + items:
> + minItems: 2
> + maxItems: 2
> + clock-names:
> + items:
> + - const: apb
> + - const: smi
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - mediatek,mt2701-smi-larb
> + - mediatek,mt2712-smi-larb
> + - mediatek,mt6779-smi-larb
> + - mediatek,mt8167-smi-larb
> +
> + then:
> + required:
> + - mediatek,larb-id
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/mt8173-clk.h>
> + #include <dt-bindings/power/mt8173-power.h>
> +
> + larb1: larb@16010000 {
> + compatible = "mediatek,mt8173-smi-larb";
> + reg = <0x16010000 0x1000>;
> + mediatek,smi = <&smi_common>;
> + power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>;
> + clocks = <&vdecsys CLK_VDEC_CKEN>,
> + <&vdecsys CLK_VDEC_LARB_CKEN>;
> + clock-names = "apb", "smi";
> + };
> --
> 2.18.0
next prev parent reply other threads:[~2020-10-31 11:36 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-30 9:12 [PATCH v4 0/3] MT8192 SMI support Yong Wu
2020-10-30 9:12 ` Yong Wu
2020-10-30 9:12 ` Yong Wu
2020-10-30 9:12 ` Yong Wu
2020-10-30 9:12 ` [PATCH v4 1/3] dt-bindings: memory: mediatek: Convert SMI to DT schema Yong Wu
2020-10-30 9:12 ` Yong Wu
2020-10-30 9:12 ` Yong Wu
2020-10-30 9:12 ` Yong Wu
2020-10-30 13:53 ` Rob Herring
2020-10-30 13:53 ` Rob Herring
2020-10-30 13:53 ` Rob Herring
2020-10-30 13:53 ` Rob Herring
2020-10-31 11:36 ` Krzysztof Kozlowski [this message]
2020-10-31 11:36 ` Krzysztof Kozlowski
2020-10-31 11:36 ` Krzysztof Kozlowski
2020-10-31 11:36 ` Krzysztof Kozlowski
2020-11-02 5:31 ` [PATCH v4 1/3] dt-bindings: memory: mediatek: Convert SMI to DT Yong Wu
2020-11-02 5:31 ` Yong Wu
2020-11-02 5:31 ` Yong Wu
2020-11-02 5:31 ` Yong Wu
2020-11-02 7:53 ` Krzysztof Kozlowski
2020-11-02 7:53 ` Krzysztof Kozlowski
2020-11-02 7:53 ` Krzysztof Kozlowski
2020-11-02 7:53 ` Krzysztof Kozlowski
2020-10-30 9:12 ` [PATCH v4 2/3] dt-bindings: memory: mediatek: Add mt8192 support Yong Wu
2020-10-30 9:12 ` Yong Wu
2020-10-30 9:12 ` Yong Wu
2020-10-30 9:12 ` Yong Wu
2020-10-30 9:12 ` [PATCH v4 3/3] memory: mtk-smi: " Yong Wu
2020-10-30 9:12 ` Yong Wu
2020-10-30 9:12 ` Yong Wu
2020-10-30 9:12 ` Yong Wu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201031113623.GA4019@kozik-lap \
--to=krzk@kernel.org \
--cc=anan.sun@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=drinkcat@chromium.org \
--cc=fparent@baylibre.com \
--cc=honghui.zhang@mediatek.com \
--cc=iommu@lists.linux-foundation.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=ming-fan.chen@mediatek.com \
--cc=robh+dt@kernel.org \
--cc=robin.murphy@arm.com \
--cc=srv_heupstream@mediatek.com \
--cc=tfiga@google.com \
--cc=will@kernel.org \
--cc=yong.wu@mediatek.com \
--cc=youlin.pei@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.