From: Ben Levinsky <ben.levinsky@xilinx.com>
To: <michael.auchter@ni.com>, <stefanos@xilinx.com>,
<mathieu.poirier@linaro.org>
Cc: <devicetree@vger.kernel.org>, <linux-remoteproc@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>
Subject: [PATCH v21 0/5] Provide basic driver to control Arm R5 co-processor found on Xilinx ZynqMP
Date: Mon, 2 Nov 2020 11:38:54 -0800 [thread overview]
Message-ID: <20201102193859.31090-1-ben.levinsky@xilinx.com> (raw)
Update Xilinx R5 Remoteproc Driver as follows:
- update documentation for zynqmp_r5_probe
- restructure so that cluster initialization code is all in one place
- add memory allocation check for cluster
- add error handling in case of second core fails at probe but first core succeeded.
- remove unneeded lines in zynqmp_r5_remoteproc_remove
Previous version https://patchwork.kernel.org/project/linux-remoteproc/list/?series=374399
Ben Levinsky (5):
firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU
configuration.
firmware: xilinx: Add shutdown/wakeup APIs
firmware: xilinx: Add RPU configuration APIs
dt-bindings: remoteproc: Add documentation for ZynqMP R5 rproc
bindings
remoteproc: Add initial zynqmp R5 remoteproc driver
.../xilinx,zynqmp-r5-remoteproc.yaml | 143 ++++
drivers/firmware/xilinx/zynqmp.c | 96 +++
drivers/remoteproc/Kconfig | 8 +
drivers/remoteproc/Makefile | 1 +
drivers/remoteproc/zynqmp_r5_remoteproc.c | 785 ++++++++++++++++++
include/linux/firmware/xlnx-zynqmp.h | 60 ++
6 files changed, 1093 insertions(+)
create mode 100644 Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml
create mode 100644 drivers/remoteproc/zynqmp_r5_remoteproc.c
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Ben Levinsky <ben.levinsky@xilinx.com>
To: <michael.auchter@ni.com>, <stefanos@xilinx.com>,
<mathieu.poirier@linaro.org>
Cc: devicetree@vger.kernel.org, linux-remoteproc@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v21 0/5] Provide basic driver to control Arm R5 co-processor found on Xilinx ZynqMP
Date: Mon, 2 Nov 2020 11:38:54 -0800 [thread overview]
Message-ID: <20201102193859.31090-1-ben.levinsky@xilinx.com> (raw)
Update Xilinx R5 Remoteproc Driver as follows:
- update documentation for zynqmp_r5_probe
- restructure so that cluster initialization code is all in one place
- add memory allocation check for cluster
- add error handling in case of second core fails at probe but first core succeeded.
- remove unneeded lines in zynqmp_r5_remoteproc_remove
Previous version https://patchwork.kernel.org/project/linux-remoteproc/list/?series=374399
Ben Levinsky (5):
firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU
configuration.
firmware: xilinx: Add shutdown/wakeup APIs
firmware: xilinx: Add RPU configuration APIs
dt-bindings: remoteproc: Add documentation for ZynqMP R5 rproc
bindings
remoteproc: Add initial zynqmp R5 remoteproc driver
.../xilinx,zynqmp-r5-remoteproc.yaml | 143 ++++
drivers/firmware/xilinx/zynqmp.c | 96 +++
drivers/remoteproc/Kconfig | 8 +
drivers/remoteproc/Makefile | 1 +
drivers/remoteproc/zynqmp_r5_remoteproc.c | 785 ++++++++++++++++++
include/linux/firmware/xlnx-zynqmp.h | 60 ++
6 files changed, 1093 insertions(+)
create mode 100644 Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml
create mode 100644 drivers/remoteproc/zynqmp_r5_remoteproc.c
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2020-11-02 19:39 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-02 19:38 Ben Levinsky [this message]
2020-11-02 19:38 ` [PATCH v21 0/5] Provide basic driver to control Arm R5 co-processor found on Xilinx ZynqMP Ben Levinsky
2020-11-02 19:38 ` [PATCH v21 1/5] firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration Ben Levinsky
2020-11-02 19:38 ` Ben Levinsky
2020-11-02 19:38 ` [PATCH v21 2/5] firmware: xilinx: Add shutdown/wakeup APIs Ben Levinsky
2020-11-02 19:38 ` Ben Levinsky
2020-11-02 19:38 ` [PATCH v21 3/5] firmware: xilinx: Add RPU configuration APIs Ben Levinsky
2020-11-02 19:38 ` Ben Levinsky
2020-11-02 19:38 ` [PATCH v21 4/5] dt-bindings: remoteproc: Add documentation for ZynqMP R5 rproc bindings Ben Levinsky
2020-11-02 19:38 ` Ben Levinsky
2020-11-02 19:38 ` [PATCH v21 5/5] remoteproc: Add initial zynqmp R5 remoteproc driver Ben Levinsky
2020-11-02 19:38 ` Ben Levinsky
2020-11-02 21:13 ` Michael Auchter
2020-11-02 21:13 ` Michael Auchter
2020-11-02 21:46 ` Ben Levinsky
2020-11-02 21:46 ` Ben Levinsky
2020-11-02 22:08 ` Michael Auchter
2020-11-02 22:08 ` Michael Auchter
2020-11-02 22:22 ` Michael Auchter
2020-11-02 22:22 ` Michael Auchter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201102193859.31090-1-ben.levinsky@xilinx.com \
--to=ben.levinsky@xilinx.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=michael.auchter@ni.com \
--cc=stefanos@xilinx.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.