* [PATCH u-boot v2019.04-aspeed-openbmc v3 1/3] ARM: dts: Aspeed: Tacoma and Rainier: Add eMMC nodes and parameters
2020-11-05 20:09 [PATCH u-boot v2019.04-aspeed-openbmc v3 0/3] Aspeed: Support eMMC boot Eddie James
@ 2020-11-05 20:09 ` Eddie James
2020-11-05 20:09 ` [PATCH u-boot v2019.04-aspeed-openbmc v3 2/3] arch: ARM: Aspeed: Add SPL eMMC partition boot support Eddie James
2020-11-05 20:09 ` [PATCH u-boot v2019.04-aspeed-openbmc v3 3/3] configs: Add AST2600 SPL eMMC configuration Eddie James
2 siblings, 0 replies; 5+ messages in thread
From: Eddie James @ 2020-11-05 20:09 UTC (permalink / raw)
To: openbmc; +Cc: Eddie James
Add the necessary eMMC/SDHC nodes and information to use the eMMC
from SPL and U-Boot.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/dts/ast2600-rainier.dts | 8 ++++++++
arch/arm/dts/ast2600-tacoma.dts | 8 ++++++++
2 files changed, 16 insertions(+)
diff --git a/arch/arm/dts/ast2600-rainier.dts b/arch/arm/dts/ast2600-rainier.dts
index ce530eb92b..67e177baf1 100755
--- a/arch/arm/dts/ast2600-rainier.dts
+++ b/arch/arm/dts/ast2600-rainier.dts
@@ -18,6 +18,7 @@
};
aliases {
+ mmc0 = &emmc_slot0;
spi0 = &fmc;
spi1 = &spi1;
};
@@ -89,9 +90,16 @@
};
};
+&emmc {
+ u-boot,dm-pre-reloc;
+ timing-phase = <0x700ff>;
+};
+
&emmc_slot0 {
+ u-boot,dm-pre-reloc;
status = "okay";
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_emmc_default>;
+ sdhci-drive-type = <1>;
};
diff --git a/arch/arm/dts/ast2600-tacoma.dts b/arch/arm/dts/ast2600-tacoma.dts
index 22b9f39fa2..85d1e3902b 100755
--- a/arch/arm/dts/ast2600-tacoma.dts
+++ b/arch/arm/dts/ast2600-tacoma.dts
@@ -18,6 +18,7 @@
};
aliases {
+ mmc0 = &emmc_slot0;
spi0 = &fmc;
spi1 = &spi1;
};
@@ -80,9 +81,16 @@
};
};
+&emmc {
+ u-boot,dm-pre-reloc;
+ timing-phase = <0x700ff>;
+};
+
&emmc_slot0 {
+ u-boot,dm-pre-reloc;
status = "okay";
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_emmc_default>;
+ sdhci-drive-type = <1>;
};
--
2.26.2
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH u-boot v2019.04-aspeed-openbmc v3 2/3] arch: ARM: Aspeed: Add SPL eMMC partition boot support
2020-11-05 20:09 [PATCH u-boot v2019.04-aspeed-openbmc v3 0/3] Aspeed: Support eMMC boot Eddie James
2020-11-05 20:09 ` [PATCH u-boot v2019.04-aspeed-openbmc v3 1/3] ARM: dts: Aspeed: Tacoma and Rainier: Add eMMC nodes and parameters Eddie James
@ 2020-11-05 20:09 ` Eddie James
2020-11-05 20:09 ` [PATCH u-boot v2019.04-aspeed-openbmc v3 3/3] configs: Add AST2600 SPL eMMC configuration Eddie James
2 siblings, 0 replies; 5+ messages in thread
From: Eddie James @ 2020-11-05 20:09 UTC (permalink / raw)
To: openbmc; +Cc: Eddie James
Support loading U-Boot from a specific partition on the eMMC
device. Add a config option to specify the partition number in
the eMMC device (not the user data partition) where the U-Boot
image is located.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/mach-aspeed/Kconfig | 8 ++++++++
arch/arm/mach-aspeed/ast2600/spl_boot.c | 9 ++++++++-
2 files changed, 16 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-aspeed/Kconfig b/arch/arm/mach-aspeed/Kconfig
index 06f14f4f55..44d392a706 100644
--- a/arch/arm/mach-aspeed/Kconfig
+++ b/arch/arm/mach-aspeed/Kconfig
@@ -90,6 +90,14 @@ config ASPEED_UBOOT_MMC_BASE
The base block number of the U-Boot
image in the eMMC device
+config ASPEED_UBOOT_MMC_PART
+ int "U-Boot eMMC partition"
+ default 0
+ help
+ The partition number of the U-Boot
+ image in the eMMC device. This is not
+ the user data partition number.
+
config ASPEED_UBOOT_MMC_SIZE
hex "U-Boot eMMC size in blocks"
default 0x0
diff --git a/arch/arm/mach-aspeed/ast2600/spl_boot.c b/arch/arm/mach-aspeed/ast2600/spl_boot.c
index b08c49d204..58a22f646e 100644
--- a/arch/arm/mach-aspeed/ast2600/spl_boot.c
+++ b/arch/arm/mach-aspeed/ast2600/spl_boot.c
@@ -46,8 +46,8 @@ static int aspeed_spl_mmc_load_image(struct spl_image_info *spl_image,
struct spl_boot_device *bootdev)
{
int err;
+ int part = CONFIG_ASPEED_UBOOT_MMC_PART;
u32 count;
-
struct mmc *mmc = NULL;
struct udevice *dev;
struct blk_desc *bd;
@@ -78,6 +78,13 @@ static int aspeed_spl_mmc_load_image(struct spl_image_info *spl_image,
bd = mmc_get_blk_desc(mmc);
+ if (part) {
+ if (CONFIG_IS_ENABLED(MMC_TINY))
+ err = mmc_switch_part(mmc, part);
+ else
+ err = blk_dselect_hwpart(bd, part);
+ }
+
count = blk_dread(bd, CONFIG_ASPEED_UBOOT_MMC_BASE, CONFIG_ASPEED_UBOOT_MMC_SIZE,
(void *)CONFIG_ASPEED_UBOOT_DRAM_BASE);
if (count != CONFIG_ASPEED_UBOOT_MMC_SIZE) {
--
2.26.2
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH u-boot v2019.04-aspeed-openbmc v3 3/3] configs: Add AST2600 SPL eMMC configuration
2020-11-05 20:09 [PATCH u-boot v2019.04-aspeed-openbmc v3 0/3] Aspeed: Support eMMC boot Eddie James
2020-11-05 20:09 ` [PATCH u-boot v2019.04-aspeed-openbmc v3 1/3] ARM: dts: Aspeed: Tacoma and Rainier: Add eMMC nodes and parameters Eddie James
2020-11-05 20:09 ` [PATCH u-boot v2019.04-aspeed-openbmc v3 2/3] arch: ARM: Aspeed: Add SPL eMMC partition boot support Eddie James
@ 2020-11-05 20:09 ` Eddie James
2020-11-06 8:31 ` Joel Stanley
2 siblings, 1 reply; 5+ messages in thread
From: Eddie James @ 2020-11-05 20:09 UTC (permalink / raw)
To: openbmc; +Cc: Eddie James
U-Boot and environment are to be loaded off the eMMC.
The environment is located at byte offset 0x5000 in the user data
partition, and is sized at 0x10000. The redundant environment
follows it immediately and is the same size. Also select the
partition number and block offset of the U-Boot image; it is in
the first boot partition (eMMC partition 1) at block 128.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
configs/ast2600_openbmc_spl_emmc_defconfig | 130 +++++++++++++++++++++
include/configs/aspeed-common.h | 6 +
2 files changed, 136 insertions(+)
create mode 100644 configs/ast2600_openbmc_spl_emmc_defconfig
diff --git a/configs/ast2600_openbmc_spl_emmc_defconfig b/configs/ast2600_openbmc_spl_emmc_defconfig
new file mode 100644
index 0000000000..68d18652c9
--- /dev/null
+++ b/configs/ast2600_openbmc_spl_emmc_defconfig
@@ -0,0 +1,130 @@
+CONFIG_ARM=y
+CONFIG_SYS_CONFIG_NAME="evb_ast2600a1_spl"
+CONFIG_SYS_DCACHE_OFF=y
+CONFIG_POSITION_INDEPENDENT=y
+CONFIG_SPL_SYS_THUMB_BUILD=y
+CONFIG_SYS_THUMB_BUILD=y
+CONFIG_SPL_LDSCRIPT="arch/$(ARCH)/mach-aspeed/ast2600/u-boot-spl.lds"
+CONFIG_ARCH_ASPEED=y
+CONFIG_SYS_TEXT_BASE=0x10000
+CONFIG_ASPEED_AST2600=y
+CONFIG_ASPEED_UBOOT_SPI_BASE=0x10000
+CONFIG_ASPEED_UBOOT_SPI_SIZE=0xd0000
+CONFIG_ASPEED_UBOOT_MMC_BASE=0x80
+CONFIG_ASPEED_UBOOT_MMC_PART=1
+CONFIG_ASPEED_UBOOT_MMC_SIZE=0x680
+CONFIG_ASPEED_UBOOT_UART_SIZE=0xe0000
+CONFIG_ASPEED_UBOOT_DRAM_BASE=0x81000000
+CONFIG_ASPEED_KERNEL_FIT_SPI_BASE=0x20100000
+CONFIG_ASPEED_KERNEL_FIT_SPI_SIZE=0x1000000
+CONFIG_ASPEED_KERNEL_FIT_MMC_BASE=0x800
+CONFIG_ASPEED_KERNEL_FIT_MMC_SIZE=0x8000
+CONFIG_ASPEED_KERNEL_FIT_DRAM_BASE=0x83000000
+CONFIG_TARGET_EVB_AST2600A1=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x800
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_ENV_SIZE=0x10000
+CONFIG_ENV_OFFSET=0x5000
+CONFIG_SPL=y
+CONFIG_SPL_STACK_R_ADDR=0x90300000
+CONFIG_ARMV7_BOOT_SEC_DEFAULT=y
+CONFIG_ARMV7_PSCI_NR_CPUS=2
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_FIT=y
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS4,115200n8 root=/dev/ram rw"
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="bootm 20100000"
+CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_ARCH_EARLY_INIT_R=y
+CONFIG_BOARD_EARLY_INIT_F=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+# CONFIG_SPL_LEGACY_IMAGE_SUPPORT is not set
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SPL_DM_RESET=y
+CONFIG_SPL_RAM_SUPPORT=y
+CONFIG_SPL_RAM_DEVICE=y
+CONFIG_SPL_WATCHDOG_SUPPORT=y
+CONFIG_SPL_YMODEM_SUPPORT=y
+CONFIG_HUSH_PARSER=y
+# CONFIG_AUTO_COMPLETE is not set
+CONFIG_SYS_PROMPT="ast# "
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_XIMG is not set
+CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+# CONFIG_RANDOM_UUID is not set
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_NCSI=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_CMD_MTDPARTS=y
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SPL_DM=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_SPL_OF_TRANSLATE=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_DM_GPIO=y
+CONFIG_ASPEED_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_ASPEED=y
+CONFIG_MISC=y
+CONFIG_ASPEED_AHBC=y
+CONFIG_DM_MMC=y
+CONFIG_SPL_MMC_TINY=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ASPEED=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_PHY_BROADCOM=y
+CONFIG_PHY_REALTEK=y
+CONFIG_PHY_NCSI=y
+CONFIG_DM_ETH=y
+CONFIG_PHY_GIGE=y
+CONFIG_FTGMAC100=y
+CONFIG_MDIO=y
+CONFIG_PHY=y
+CONFIG_PINCTRL=y
+CONFIG_RAM=y
+CONFIG_SPL_RAM=y
+CONFIG_DM_SERIAL=y
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_SYSRESET=y
+CONFIG_WDT=y
+CONFIG_USE_TINY_PRINTF=y
+CONFIG_TPM=y
+CONFIG_SPL_TPM=y
+# CONFIG_EFI_LOADER is not set
diff --git a/include/configs/aspeed-common.h b/include/configs/aspeed-common.h
index 4c83035d3c..876958735b 100755
--- a/include/configs/aspeed-common.h
+++ b/include/configs/aspeed-common.h
@@ -41,6 +41,12 @@
#define CONFIG_SYS_BOOTMAPSZ (256 * 1024 * 1024)
#define CONFIG_SYS_MALLOC_LEN (32 << 20)
+#ifdef CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_SYS_MMC_ENV_PART 0
+#define CONFIG_ENV_OFFSET_REDUND 0x15000
+#endif
+
/*
* BOOTP options
*/
--
2.26.2
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH u-boot v2019.04-aspeed-openbmc v3 3/3] configs: Add AST2600 SPL eMMC configuration
2020-11-05 20:09 ` [PATCH u-boot v2019.04-aspeed-openbmc v3 3/3] configs: Add AST2600 SPL eMMC configuration Eddie James
@ 2020-11-06 8:31 ` Joel Stanley
0 siblings, 0 replies; 5+ messages in thread
From: Joel Stanley @ 2020-11-06 8:31 UTC (permalink / raw)
To: Eddie James; +Cc: OpenBMC Maillist
On Thu, 5 Nov 2020 at 20:09, Eddie James <eajames@linux.ibm.com> wrote:
>
> U-Boot and environment are to be loaded off the eMMC.
> The environment is located at byte offset 0x5000 in the user data
> partition, and is sized at 0x10000. The redundant environment
> follows it immediately and is the same size. Also select the
> partition number and block offset of the U-Boot image; it is in
> the first boot partition (eMMC partition 1) at block 128.
Can we merge this with the non-emmc defconfig, now that you've tested
that it works on NOR?
The diff looked like this:
-CONFIG_ASPEED_UBOOT_SPI_SIZE=0xe0000
-CONFIG_ASPEED_UBOOT_MMC_BASE=0x000000
-CONFIG_ASPEED_UBOOT_MMC_SIZE=0x700
+CONFIG_ASPEED_UBOOT_SPI_SIZE=0xd0000
+CONFIG_ASPEED_UBOOT_MMC_BASE=0x80
+CONFIG_ASPEED_UBOOT_MMC_PART=1
+CONFIG_ASPEED_UBOOT_MMC_SIZE=0x680
-CONFIG_ENV_OFFSET=0xE0000
+CONFIG_ENV_OFFSET=0x5000
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_USE_ENV_SPI_BUS=y
-CONFIG_ENV_SPI_BUS=0
-CONFIG_USE_ENV_SPI_CS=y
-CONFIG_ENV_SPI_CS=0
-CONFIG_USE_ENV_SPI_MAX_HZ=y
-CONFIG_ENV_SPI_MAX_HZ=100000000
+CONFIG_ENV_IS_IN_MMC=y
To answer my own question, no, as these two options conflict:
CONFIG_ENV_IS_IN_SPI_FLASH / CONFIG_ENV_IS_IN_MMC
I'll apply the series as you have it.
Cheers,
Joel
>
> Signed-off-by: Eddie James <eajames@linux.ibm.com>
> ---
> configs/ast2600_openbmc_spl_emmc_defconfig | 130 +++++++++++++++++++++
> include/configs/aspeed-common.h | 6 +
> 2 files changed, 136 insertions(+)
> create mode 100644 configs/ast2600_openbmc_spl_emmc_defconfig
>
> diff --git a/configs/ast2600_openbmc_spl_emmc_defconfig b/configs/ast2600_openbmc_spl_emmc_defconfig
> new file mode 100644
> index 0000000000..68d18652c9
> --- /dev/null
> +++ b/configs/ast2600_openbmc_spl_emmc_defconfig
> @@ -0,0 +1,130 @@
> +CONFIG_ARM=y
> +CONFIG_SYS_CONFIG_NAME="evb_ast2600a1_spl"
> +CONFIG_SYS_DCACHE_OFF=y
> +CONFIG_POSITION_INDEPENDENT=y
> +CONFIG_SPL_SYS_THUMB_BUILD=y
> +CONFIG_SYS_THUMB_BUILD=y
> +CONFIG_SPL_LDSCRIPT="arch/$(ARCH)/mach-aspeed/ast2600/u-boot-spl.lds"
> +CONFIG_ARCH_ASPEED=y
> +CONFIG_SYS_TEXT_BASE=0x10000
> +CONFIG_ASPEED_AST2600=y
> +CONFIG_ASPEED_UBOOT_SPI_BASE=0x10000
> +CONFIG_ASPEED_UBOOT_SPI_SIZE=0xd0000
> +CONFIG_ASPEED_UBOOT_MMC_BASE=0x80
> +CONFIG_ASPEED_UBOOT_MMC_PART=1
> +CONFIG_ASPEED_UBOOT_MMC_SIZE=0x680
> +CONFIG_ASPEED_UBOOT_UART_SIZE=0xe0000
> +CONFIG_ASPEED_UBOOT_DRAM_BASE=0x81000000
> +CONFIG_ASPEED_KERNEL_FIT_SPI_BASE=0x20100000
> +CONFIG_ASPEED_KERNEL_FIT_SPI_SIZE=0x1000000
> +CONFIG_ASPEED_KERNEL_FIT_MMC_BASE=0x800
> +CONFIG_ASPEED_KERNEL_FIT_MMC_SIZE=0x8000
> +CONFIG_ASPEED_KERNEL_FIT_DRAM_BASE=0x83000000
> +CONFIG_TARGET_EVB_AST2600A1=y
> +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> +CONFIG_SPL_LIBGENERIC_SUPPORT=y
> +CONFIG_SYS_MALLOC_F_LEN=0x800
> +CONFIG_SPL_MMC_SUPPORT=y
> +CONFIG_SPL_SERIAL_SUPPORT=y
> +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
> +CONFIG_ENV_SIZE=0x10000
> +CONFIG_ENV_OFFSET=0x5000
> +CONFIG_SPL=y
> +CONFIG_SPL_STACK_R_ADDR=0x90300000
> +CONFIG_ARMV7_BOOT_SEC_DEFAULT=y
> +CONFIG_ARMV7_PSCI_NR_CPUS=2
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_FIT=y
> +CONFIG_USE_BOOTARGS=y
> +CONFIG_BOOTARGS="console=ttyS4,115200n8 root=/dev/ram rw"
> +CONFIG_USE_BOOTCOMMAND=y
> +CONFIG_BOOTCOMMAND="bootm 20100000"
> +CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_ARCH_EARLY_INIT_R=y
> +CONFIG_BOARD_EARLY_INIT_F=y
> +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> +# CONFIG_SPL_LEGACY_IMAGE_SUPPORT is not set
> +CONFIG_SPL_SYS_MALLOC_SIMPLE=y
> +CONFIG_SPL_STACK_R=y
> +CONFIG_SPL_SEPARATE_BSS=y
> +CONFIG_SPL_DM_RESET=y
> +CONFIG_SPL_RAM_SUPPORT=y
> +CONFIG_SPL_RAM_DEVICE=y
> +CONFIG_SPL_WATCHDOG_SUPPORT=y
> +CONFIG_SPL_YMODEM_SUPPORT=y
> +CONFIG_HUSH_PARSER=y
> +# CONFIG_AUTO_COMPLETE is not set
> +CONFIG_SYS_PROMPT="ast# "
> +CONFIG_CMD_BOOTZ=y
> +# CONFIG_CMD_ELF is not set
> +# CONFIG_CMD_IMI is not set
> +# CONFIG_CMD_XIMG is not set
> +CONFIG_CMD_MEMTEST=y
> +CONFIG_SYS_ALT_MEMTEST=y
> +CONFIG_CMD_CLK=y
> +CONFIG_CMD_GPIO=y
> +CONFIG_CMD_GPT=y
> +# CONFIG_RANDOM_UUID is not set
> +CONFIG_CMD_I2C=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_PART=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_DHCP=y
> +CONFIG_CMD_MII=y
> +CONFIG_CMD_PING=y
> +CONFIG_CMD_NCSI=y
> +CONFIG_CMD_EXT2=y
> +CONFIG_CMD_EXT4=y
> +CONFIG_CMD_EXT4_WRITE=y
> +CONFIG_CMD_FAT=y
> +CONFIG_CMD_FS_GENERIC=y
> +CONFIG_CMD_MTDPARTS=y
> +# CONFIG_SPL_EFI_PARTITION is not set
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_SPL_DM=y
> +CONFIG_REGMAP=y
> +CONFIG_SYSCON=y
> +CONFIG_SPL_OF_TRANSLATE=y
> +CONFIG_CLK=y
> +CONFIG_SPL_CLK=y
> +CONFIG_DM_GPIO=y
> +CONFIG_ASPEED_GPIO=y
> +CONFIG_DM_I2C=y
> +CONFIG_SYS_I2C_ASPEED=y
> +CONFIG_MISC=y
> +CONFIG_ASPEED_AHBC=y
> +CONFIG_DM_MMC=y
> +CONFIG_SPL_MMC_TINY=y
> +CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_ASPEED=y
> +CONFIG_DM_SPI_FLASH=y
> +CONFIG_SPI_FLASH=y
> +CONFIG_SPI_FLASH_GIGADEVICE=y
> +CONFIG_SPI_FLASH_MACRONIX=y
> +CONFIG_SPI_FLASH_SPANSION=y
> +CONFIG_SPI_FLASH_STMICRO=y
> +CONFIG_SPI_FLASH_WINBOND=y
> +CONFIG_PHY_BROADCOM=y
> +CONFIG_PHY_REALTEK=y
> +CONFIG_PHY_NCSI=y
> +CONFIG_DM_ETH=y
> +CONFIG_PHY_GIGE=y
> +CONFIG_FTGMAC100=y
> +CONFIG_MDIO=y
> +CONFIG_PHY=y
> +CONFIG_PINCTRL=y
> +CONFIG_RAM=y
> +CONFIG_SPL_RAM=y
> +CONFIG_DM_SERIAL=y
> +CONFIG_SYS_NS16550=y
> +CONFIG_SPI=y
> +CONFIG_DM_SPI=y
> +CONFIG_SYSRESET=y
> +CONFIG_WDT=y
> +CONFIG_USE_TINY_PRINTF=y
> +CONFIG_TPM=y
> +CONFIG_SPL_TPM=y
> +# CONFIG_EFI_LOADER is not set
> diff --git a/include/configs/aspeed-common.h b/include/configs/aspeed-common.h
> index 4c83035d3c..876958735b 100755
> --- a/include/configs/aspeed-common.h
> +++ b/include/configs/aspeed-common.h
> @@ -41,6 +41,12 @@
> #define CONFIG_SYS_BOOTMAPSZ (256 * 1024 * 1024)
> #define CONFIG_SYS_MALLOC_LEN (32 << 20)
>
> +#ifdef CONFIG_ENV_IS_IN_MMC
> +#define CONFIG_SYS_MMC_ENV_DEV 0
> +#define CONFIG_SYS_MMC_ENV_PART 0
> +#define CONFIG_ENV_OFFSET_REDUND 0x15000
> +#endif
> +
> /*
> * BOOTP options
> */
> --
> 2.26.2
>
^ permalink raw reply [flat|nested] 5+ messages in thread