All of lore.kernel.org
 help / color / mirror / Atom feed
From: Baoquan He <bhe@redhat.com>
To: Chen Zhou <chenzhou10@huawei.com>, bhsharma@redhat.com
Cc: horms@verge.net.au, John.P.donnelly@oracle.com,
	guohanjun@huawei.com, xiexiuqi@huawei.com, arnd@arndb.de,
	will@kernel.org, corbet@lwn.net, catalin.marinas@arm.com,
	linux-doc@vger.kernel.org, kexec@lists.infradead.org,
	linux-kernel@vger.kernel.org, robh+dt@kernel.org,
	wangkefeng.wang@huawei.com, mingo@redhat.com,
	james.morse@arm.com, linux-arm-kernel@lists.infradead.org,
	huawei.libin@huawei.com, prabhakar.pkin@gmail.com,
	tglx@linutronix.de, dyoung@redhat.com, nsaenzjulienne@suse.de
Subject: Re: [PATCH v13 0/8] support reserving crashkernel above 4G on arm64 kdump
Date: Wed, 11 Nov 2020 11:01:36 +0800	[thread overview]
Message-ID: <20201111030136.GD8486@MiWiFi-R3L-srv> (raw)
In-Reply-To: <20201031074437.168008-1-chenzhou10@huawei.com>

Hi Zhou, Bhupesh

On 10/31/20 at 03:44pm, Chen Zhou wrote:
> There are following issues in arm64 kdump:
> 1. We use crashkernel=X to reserve crashkernel below 4G, which
> will fail when there is no enough low memory.
> 2. If reserving crashkernel above 4G, in this case, crash dump
> kernel will boot failure because there is no low memory available
> for allocation.
> 3. Since commit 1a8e1cef7603 ("arm64: use both ZONE_DMA and ZONE_DMA32"),
> if the memory reserved for crash dump kernel falled in ZONE_DMA32,
> the devices in crash dump kernel need to use ZONE_DMA will alloc
> fail.

I went through this patchset, mainly the x86 related and generic
changes, the changes look great and no risk. And I know Bhupesh is
following up this and helping review, thanks, both.

So you have also tested crashkernel reservation on x86_64, with the
normal reservation, and high/low reservation, it is working well,
right? Asking this because I didn't see the test result description, and
just note it.

Thanks
Baoquan

> 
> To solve these issues, change the behavior of crashkernel=X.
> crashkernel=X tries low allocation in DMA zone (or the DMA32 zone if
> CONFIG_ZONE_DMA is disabled), and fall back to high allocation if it fails.
> 
> We can also use "crashkernel=X,high" to select a high region above
> DMA zone, which also tries to allocate at least 256M low memory in
> DMA zone automatically (or the DMA32 zone if CONFIG_ZONE_DMA is disabled).
> "crashkernel=Y,low" can be used to allocate specified size low memory.
> 
> When reserving crashkernel in high memory, some low memory is reserved
> for crash dump kernel devices. So there may be two regions reserved for
> crash dump kernel.
> In order to distinct from the high region and make no effect to the use
> of existing kexec-tools, rename the low region as "Crash kernel (low)",
> and pass the low region by reusing DT property
> "linux,usable-memory-range". We made the low memory region as the last
> range of "linux,usable-memory-range" to keep compatibility with existing
> user-space and older kdump kernels.
> 
> Besides, we need to modify kexec-tools:
> arm64: support more than one crash kernel regions(see [1])
> 
> Another update is document about DT property 'linux,usable-memory-range':
> schemas: update 'linux,usable-memory-range' node schema(see [2])
> 
> This patchset contains the following eight patches:
> 0001-x86-kdump-replace-the-hard-coded-alignment-with-macr.patch
> 0002-x86-kdump-make-the-lower-bound-of-crash-kernel-reser.patch
> 0003-x86-kdump-use-macro-CRASH_ADDR_LOW_MAX-in-functions-.patch
> 0004-x86-kdump-move-reserve_crashkernel-_low-into-crash_c.patch
> 0005-arm64-kdump-introduce-some-macroes-for-crash-kernel-.patch
> 0006-arm64-kdump-reimplement-crashkernel-X.patch
> 0007-arm64-kdump-add-memory-for-devices-by-DT-property-li.patch
> 0008-kdump-update-Documentation-about-crashkernel.patch
> 
> 0001-0003 are some x86 cleanups which prepares for making
> functionsreserve_crashkernel[_low]() generic.
> 0004 makes functions reserve_crashkernel[_low]() generic.
> 0005-0006 reimplements arm64 crashkernel=X.
> 0007 adds memory for devices by DT property linux,usable-memory-range.
> 0008 updates the doc.
> 
> Changes since [v12]
> - Rebased on top of 5.10-rc1.
> - Keep CRASH_ALIGN as 16M suggested by Dave.
> - Drop patch "kdump: add threshold for the required memory".
> - Add Tested-by from John.
> 
> Changes since [v11]
> - Rebased on top of 5.9-rc4.
> - Make the function reserve_crashkernel() of x86 generic.
> Suggested by Catalin, make the function reserve_crashkernel() of x86 generic
> and arm64 use the generic version to reimplement crashkernel=X.
> 
> Changes since [v10]
> - Reimplement crashkernel=X suggested by Catalin, Many thanks to Catalin.
> 
> Changes since [v9]
> - Patch 1 add Acked-by from Dave.
> - Update patch 5 according to Dave's comments.
> - Update chosen schema.
> 
> Changes since [v8]
> - Reuse DT property "linux,usable-memory-range".
> Suggested by Rob, reuse DT property "linux,usable-memory-range" to pass the low
> memory region.
> - Fix kdump broken with ZONE_DMA reintroduced.
> - Update chosen schema.
> 
> Changes since [v7]
> - Move x86 CRASH_ALIGN to 2M
> Suggested by Dave and do some test, move x86 CRASH_ALIGN to 2M.
> - Update Documentation/devicetree/bindings/chosen.txt.
> Add corresponding documentation to Documentation/devicetree/bindings/chosen.txt
> suggested by Arnd.
> - Add Tested-by from Jhon and pk.
> 
> Changes since [v6]
> - Fix build errors reported by kbuild test robot.
> 
> Changes since [v5]
> - Move reserve_crashkernel_low() into kernel/crash_core.c.
> - Delete crashkernel=X,high.
> - Modify crashkernel=X,low.
> If crashkernel=X,low is specified simultaneously, reserve spcified size low
> memory for crash kdump kernel devices firstly and then reserve memory above 4G.
> In addition, rename crashk_low_res as "Crash kernel (low)" for arm64, and then
> pass to crash dump kernel by DT property "linux,low-memory-range".
> - Update Documentation/admin-guide/kdump/kdump.rst.
> 
> Changes since [v4]
> - Reimplement memblock_cap_memory_ranges for multiple ranges by Mike.
> 
> Changes since [v3]
> - Add memblock_cap_memory_ranges back for multiple ranges.
> - Fix some compiling warnings.
> 
> Changes since [v2]
> - Split patch "arm64: kdump: support reserving crashkernel above 4G" as
> two. Put "move reserve_crashkernel_low() into kexec_core.c" in a separate
> patch.
> 
> Changes since [v1]:
> - Move common reserve_crashkernel_low() code into kernel/kexec_core.c.
> - Remove memblock_cap_memory_ranges() i added in v1 and implement that
> in fdt_enforce_memory_region().
> There are at most two crash kernel regions, for two crash kernel regions
> case, we cap the memory range [min(regs[*].start), max(regs[*].end)]
> and then remove the memory range in the middle.
> 
> [1]: http://lists.infradead.org/pipermail/kexec/2020-June/020737.html
> [2]: https://github.com/robherring/dt-schema/pull/19 
> [v1]: https://lkml.org/lkml/2019/4/2/1174
> [v2]: https://lkml.org/lkml/2019/4/9/86
> [v3]: https://lkml.org/lkml/2019/4/9/306
> [v4]: https://lkml.org/lkml/2019/4/15/273
> [v5]: https://lkml.org/lkml/2019/5/6/1360
> [v6]: https://lkml.org/lkml/2019/8/30/142
> [v7]: https://lkml.org/lkml/2019/12/23/411
> [v8]: https://lkml.org/lkml/2020/5/21/213
> [v9]: https://lkml.org/lkml/2020/6/28/73
> [v10]: https://lkml.org/lkml/2020/7/2/1443
> [v11]: https://lkml.org/lkml/2020/8/1/150
> [v12]: https://lkml.org/lkml/2020/9/7/1037
> 
> Chen Zhou (8):
>   x86: kdump: replace the hard-coded alignment with macro CRASH_ALIGN
>   x86: kdump: make the lower bound of crash kernel reservation
>     consistent
>   x86: kdump: use macro CRASH_ADDR_LOW_MAX in functions
>     reserve_crashkernel()
>   x86: kdump: move reserve_crashkernel[_low]() into crash_core.c
>   arm64: kdump: introduce some macroes for crash kernel reservation
>   arm64: kdump: reimplement crashkernel=X
>   arm64: kdump: add memory for devices by DT property
>     linux,usable-memory-range
>   kdump: update Documentation about crashkernel
> 
>  Documentation/admin-guide/kdump/kdump.rst     |  23 ++-
>  .../admin-guide/kernel-parameters.txt         |  12 +-
>  arch/arm64/include/asm/kexec.h                |  15 ++
>  arch/arm64/include/asm/processor.h            |   1 +
>  arch/arm64/kernel/setup.c                     |  13 +-
>  arch/arm64/mm/init.c                          | 105 ++++-------
>  arch/arm64/mm/mmu.c                           |   4 +
>  arch/x86/include/asm/kexec.h                  |  28 +++
>  arch/x86/kernel/setup.c                       | 153 +---------------
>  include/linux/crash_core.h                    |   4 +
>  include/linux/kexec.h                         |   2 -
>  kernel/crash_core.c                           | 168 ++++++++++++++++++
>  kernel/kexec_core.c                           |  17 --
>  13 files changed, 301 insertions(+), 244 deletions(-)
> 
> -- 
> 2.20.1
> 


_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

WARNING: multiple messages have this Message-ID (diff)
From: Baoquan He <bhe@redhat.com>
To: Chen Zhou <chenzhou10@huawei.com>, bhsharma@redhat.com
Cc: tglx@linutronix.de, mingo@redhat.com, dyoung@redhat.com,
	catalin.marinas@arm.com, will@kernel.org, corbet@lwn.net,
	John.P.donnelly@oracle.com, prabhakar.pkin@gmail.com,
	horms@verge.net.au, robh+dt@kernel.org, arnd@arndb.de,
	nsaenzjulienne@suse.de, james.morse@arm.com,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, kexec@lists.infradead.org,
	linux-doc@vger.kernel.org, xiexiuqi@huawei.com,
	guohanjun@huawei.com, huawei.libin@huawei.com,
	wangkefeng.wang@huawei.com
Subject: Re: [PATCH v13 0/8] support reserving crashkernel above 4G on arm64 kdump
Date: Wed, 11 Nov 2020 11:01:36 +0800	[thread overview]
Message-ID: <20201111030136.GD8486@MiWiFi-R3L-srv> (raw)
In-Reply-To: <20201031074437.168008-1-chenzhou10@huawei.com>

Hi Zhou, Bhupesh

On 10/31/20 at 03:44pm, Chen Zhou wrote:
> There are following issues in arm64 kdump:
> 1. We use crashkernel=X to reserve crashkernel below 4G, which
> will fail when there is no enough low memory.
> 2. If reserving crashkernel above 4G, in this case, crash dump
> kernel will boot failure because there is no low memory available
> for allocation.
> 3. Since commit 1a8e1cef7603 ("arm64: use both ZONE_DMA and ZONE_DMA32"),
> if the memory reserved for crash dump kernel falled in ZONE_DMA32,
> the devices in crash dump kernel need to use ZONE_DMA will alloc
> fail.

I went through this patchset, mainly the x86 related and generic
changes, the changes look great and no risk. And I know Bhupesh is
following up this and helping review, thanks, both.

So you have also tested crashkernel reservation on x86_64, with the
normal reservation, and high/low reservation, it is working well,
right? Asking this because I didn't see the test result description, and
just note it.

Thanks
Baoquan

> 
> To solve these issues, change the behavior of crashkernel=X.
> crashkernel=X tries low allocation in DMA zone (or the DMA32 zone if
> CONFIG_ZONE_DMA is disabled), and fall back to high allocation if it fails.
> 
> We can also use "crashkernel=X,high" to select a high region above
> DMA zone, which also tries to allocate at least 256M low memory in
> DMA zone automatically (or the DMA32 zone if CONFIG_ZONE_DMA is disabled).
> "crashkernel=Y,low" can be used to allocate specified size low memory.
> 
> When reserving crashkernel in high memory, some low memory is reserved
> for crash dump kernel devices. So there may be two regions reserved for
> crash dump kernel.
> In order to distinct from the high region and make no effect to the use
> of existing kexec-tools, rename the low region as "Crash kernel (low)",
> and pass the low region by reusing DT property
> "linux,usable-memory-range". We made the low memory region as the last
> range of "linux,usable-memory-range" to keep compatibility with existing
> user-space and older kdump kernels.
> 
> Besides, we need to modify kexec-tools:
> arm64: support more than one crash kernel regions(see [1])
> 
> Another update is document about DT property 'linux,usable-memory-range':
> schemas: update 'linux,usable-memory-range' node schema(see [2])
> 
> This patchset contains the following eight patches:
> 0001-x86-kdump-replace-the-hard-coded-alignment-with-macr.patch
> 0002-x86-kdump-make-the-lower-bound-of-crash-kernel-reser.patch
> 0003-x86-kdump-use-macro-CRASH_ADDR_LOW_MAX-in-functions-.patch
> 0004-x86-kdump-move-reserve_crashkernel-_low-into-crash_c.patch
> 0005-arm64-kdump-introduce-some-macroes-for-crash-kernel-.patch
> 0006-arm64-kdump-reimplement-crashkernel-X.patch
> 0007-arm64-kdump-add-memory-for-devices-by-DT-property-li.patch
> 0008-kdump-update-Documentation-about-crashkernel.patch
> 
> 0001-0003 are some x86 cleanups which prepares for making
> functionsreserve_crashkernel[_low]() generic.
> 0004 makes functions reserve_crashkernel[_low]() generic.
> 0005-0006 reimplements arm64 crashkernel=X.
> 0007 adds memory for devices by DT property linux,usable-memory-range.
> 0008 updates the doc.
> 
> Changes since [v12]
> - Rebased on top of 5.10-rc1.
> - Keep CRASH_ALIGN as 16M suggested by Dave.
> - Drop patch "kdump: add threshold for the required memory".
> - Add Tested-by from John.
> 
> Changes since [v11]
> - Rebased on top of 5.9-rc4.
> - Make the function reserve_crashkernel() of x86 generic.
> Suggested by Catalin, make the function reserve_crashkernel() of x86 generic
> and arm64 use the generic version to reimplement crashkernel=X.
> 
> Changes since [v10]
> - Reimplement crashkernel=X suggested by Catalin, Many thanks to Catalin.
> 
> Changes since [v9]
> - Patch 1 add Acked-by from Dave.
> - Update patch 5 according to Dave's comments.
> - Update chosen schema.
> 
> Changes since [v8]
> - Reuse DT property "linux,usable-memory-range".
> Suggested by Rob, reuse DT property "linux,usable-memory-range" to pass the low
> memory region.
> - Fix kdump broken with ZONE_DMA reintroduced.
> - Update chosen schema.
> 
> Changes since [v7]
> - Move x86 CRASH_ALIGN to 2M
> Suggested by Dave and do some test, move x86 CRASH_ALIGN to 2M.
> - Update Documentation/devicetree/bindings/chosen.txt.
> Add corresponding documentation to Documentation/devicetree/bindings/chosen.txt
> suggested by Arnd.
> - Add Tested-by from Jhon and pk.
> 
> Changes since [v6]
> - Fix build errors reported by kbuild test robot.
> 
> Changes since [v5]
> - Move reserve_crashkernel_low() into kernel/crash_core.c.
> - Delete crashkernel=X,high.
> - Modify crashkernel=X,low.
> If crashkernel=X,low is specified simultaneously, reserve spcified size low
> memory for crash kdump kernel devices firstly and then reserve memory above 4G.
> In addition, rename crashk_low_res as "Crash kernel (low)" for arm64, and then
> pass to crash dump kernel by DT property "linux,low-memory-range".
> - Update Documentation/admin-guide/kdump/kdump.rst.
> 
> Changes since [v4]
> - Reimplement memblock_cap_memory_ranges for multiple ranges by Mike.
> 
> Changes since [v3]
> - Add memblock_cap_memory_ranges back for multiple ranges.
> - Fix some compiling warnings.
> 
> Changes since [v2]
> - Split patch "arm64: kdump: support reserving crashkernel above 4G" as
> two. Put "move reserve_crashkernel_low() into kexec_core.c" in a separate
> patch.
> 
> Changes since [v1]:
> - Move common reserve_crashkernel_low() code into kernel/kexec_core.c.
> - Remove memblock_cap_memory_ranges() i added in v1 and implement that
> in fdt_enforce_memory_region().
> There are at most two crash kernel regions, for two crash kernel regions
> case, we cap the memory range [min(regs[*].start), max(regs[*].end)]
> and then remove the memory range in the middle.
> 
> [1]: http://lists.infradead.org/pipermail/kexec/2020-June/020737.html
> [2]: https://github.com/robherring/dt-schema/pull/19 
> [v1]: https://lkml.org/lkml/2019/4/2/1174
> [v2]: https://lkml.org/lkml/2019/4/9/86
> [v3]: https://lkml.org/lkml/2019/4/9/306
> [v4]: https://lkml.org/lkml/2019/4/15/273
> [v5]: https://lkml.org/lkml/2019/5/6/1360
> [v6]: https://lkml.org/lkml/2019/8/30/142
> [v7]: https://lkml.org/lkml/2019/12/23/411
> [v8]: https://lkml.org/lkml/2020/5/21/213
> [v9]: https://lkml.org/lkml/2020/6/28/73
> [v10]: https://lkml.org/lkml/2020/7/2/1443
> [v11]: https://lkml.org/lkml/2020/8/1/150
> [v12]: https://lkml.org/lkml/2020/9/7/1037
> 
> Chen Zhou (8):
>   x86: kdump: replace the hard-coded alignment with macro CRASH_ALIGN
>   x86: kdump: make the lower bound of crash kernel reservation
>     consistent
>   x86: kdump: use macro CRASH_ADDR_LOW_MAX in functions
>     reserve_crashkernel()
>   x86: kdump: move reserve_crashkernel[_low]() into crash_core.c
>   arm64: kdump: introduce some macroes for crash kernel reservation
>   arm64: kdump: reimplement crashkernel=X
>   arm64: kdump: add memory for devices by DT property
>     linux,usable-memory-range
>   kdump: update Documentation about crashkernel
> 
>  Documentation/admin-guide/kdump/kdump.rst     |  23 ++-
>  .../admin-guide/kernel-parameters.txt         |  12 +-
>  arch/arm64/include/asm/kexec.h                |  15 ++
>  arch/arm64/include/asm/processor.h            |   1 +
>  arch/arm64/kernel/setup.c                     |  13 +-
>  arch/arm64/mm/init.c                          | 105 ++++-------
>  arch/arm64/mm/mmu.c                           |   4 +
>  arch/x86/include/asm/kexec.h                  |  28 +++
>  arch/x86/kernel/setup.c                       | 153 +---------------
>  include/linux/crash_core.h                    |   4 +
>  include/linux/kexec.h                         |   2 -
>  kernel/crash_core.c                           | 168 ++++++++++++++++++
>  kernel/kexec_core.c                           |  17 --
>  13 files changed, 301 insertions(+), 244 deletions(-)
> 
> -- 
> 2.20.1
> 


WARNING: multiple messages have this Message-ID (diff)
From: Baoquan He <bhe@redhat.com>
To: Chen Zhou <chenzhou10@huawei.com>, bhsharma@redhat.com
Cc: horms@verge.net.au, John.P.donnelly@oracle.com,
	guohanjun@huawei.com, xiexiuqi@huawei.com, arnd@arndb.de,
	will@kernel.org, corbet@lwn.net, catalin.marinas@arm.com,
	linux-doc@vger.kernel.org, kexec@lists.infradead.org,
	linux-kernel@vger.kernel.org, robh+dt@kernel.org,
	wangkefeng.wang@huawei.com, mingo@redhat.com,
	james.morse@arm.com, linux-arm-kernel@lists.infradead.org,
	huawei.libin@huawei.com, prabhakar.pkin@gmail.com,
	tglx@linutronix.de, dyoung@redhat.com, nsaenzjulienne@suse.de
Subject: Re: [PATCH v13 0/8] support reserving crashkernel above 4G on arm64 kdump
Date: Wed, 11 Nov 2020 11:01:36 +0800	[thread overview]
Message-ID: <20201111030136.GD8486@MiWiFi-R3L-srv> (raw)
In-Reply-To: <20201031074437.168008-1-chenzhou10@huawei.com>

Hi Zhou, Bhupesh

On 10/31/20 at 03:44pm, Chen Zhou wrote:
> There are following issues in arm64 kdump:
> 1. We use crashkernel=X to reserve crashkernel below 4G, which
> will fail when there is no enough low memory.
> 2. If reserving crashkernel above 4G, in this case, crash dump
> kernel will boot failure because there is no low memory available
> for allocation.
> 3. Since commit 1a8e1cef7603 ("arm64: use both ZONE_DMA and ZONE_DMA32"),
> if the memory reserved for crash dump kernel falled in ZONE_DMA32,
> the devices in crash dump kernel need to use ZONE_DMA will alloc
> fail.

I went through this patchset, mainly the x86 related and generic
changes, the changes look great and no risk. And I know Bhupesh is
following up this and helping review, thanks, both.

So you have also tested crashkernel reservation on x86_64, with the
normal reservation, and high/low reservation, it is working well,
right? Asking this because I didn't see the test result description, and
just note it.

Thanks
Baoquan

> 
> To solve these issues, change the behavior of crashkernel=X.
> crashkernel=X tries low allocation in DMA zone (or the DMA32 zone if
> CONFIG_ZONE_DMA is disabled), and fall back to high allocation if it fails.
> 
> We can also use "crashkernel=X,high" to select a high region above
> DMA zone, which also tries to allocate at least 256M low memory in
> DMA zone automatically (or the DMA32 zone if CONFIG_ZONE_DMA is disabled).
> "crashkernel=Y,low" can be used to allocate specified size low memory.
> 
> When reserving crashkernel in high memory, some low memory is reserved
> for crash dump kernel devices. So there may be two regions reserved for
> crash dump kernel.
> In order to distinct from the high region and make no effect to the use
> of existing kexec-tools, rename the low region as "Crash kernel (low)",
> and pass the low region by reusing DT property
> "linux,usable-memory-range". We made the low memory region as the last
> range of "linux,usable-memory-range" to keep compatibility with existing
> user-space and older kdump kernels.
> 
> Besides, we need to modify kexec-tools:
> arm64: support more than one crash kernel regions(see [1])
> 
> Another update is document about DT property 'linux,usable-memory-range':
> schemas: update 'linux,usable-memory-range' node schema(see [2])
> 
> This patchset contains the following eight patches:
> 0001-x86-kdump-replace-the-hard-coded-alignment-with-macr.patch
> 0002-x86-kdump-make-the-lower-bound-of-crash-kernel-reser.patch
> 0003-x86-kdump-use-macro-CRASH_ADDR_LOW_MAX-in-functions-.patch
> 0004-x86-kdump-move-reserve_crashkernel-_low-into-crash_c.patch
> 0005-arm64-kdump-introduce-some-macroes-for-crash-kernel-.patch
> 0006-arm64-kdump-reimplement-crashkernel-X.patch
> 0007-arm64-kdump-add-memory-for-devices-by-DT-property-li.patch
> 0008-kdump-update-Documentation-about-crashkernel.patch
> 
> 0001-0003 are some x86 cleanups which prepares for making
> functionsreserve_crashkernel[_low]() generic.
> 0004 makes functions reserve_crashkernel[_low]() generic.
> 0005-0006 reimplements arm64 crashkernel=X.
> 0007 adds memory for devices by DT property linux,usable-memory-range.
> 0008 updates the doc.
> 
> Changes since [v12]
> - Rebased on top of 5.10-rc1.
> - Keep CRASH_ALIGN as 16M suggested by Dave.
> - Drop patch "kdump: add threshold for the required memory".
> - Add Tested-by from John.
> 
> Changes since [v11]
> - Rebased on top of 5.9-rc4.
> - Make the function reserve_crashkernel() of x86 generic.
> Suggested by Catalin, make the function reserve_crashkernel() of x86 generic
> and arm64 use the generic version to reimplement crashkernel=X.
> 
> Changes since [v10]
> - Reimplement crashkernel=X suggested by Catalin, Many thanks to Catalin.
> 
> Changes since [v9]
> - Patch 1 add Acked-by from Dave.
> - Update patch 5 according to Dave's comments.
> - Update chosen schema.
> 
> Changes since [v8]
> - Reuse DT property "linux,usable-memory-range".
> Suggested by Rob, reuse DT property "linux,usable-memory-range" to pass the low
> memory region.
> - Fix kdump broken with ZONE_DMA reintroduced.
> - Update chosen schema.
> 
> Changes since [v7]
> - Move x86 CRASH_ALIGN to 2M
> Suggested by Dave and do some test, move x86 CRASH_ALIGN to 2M.
> - Update Documentation/devicetree/bindings/chosen.txt.
> Add corresponding documentation to Documentation/devicetree/bindings/chosen.txt
> suggested by Arnd.
> - Add Tested-by from Jhon and pk.
> 
> Changes since [v6]
> - Fix build errors reported by kbuild test robot.
> 
> Changes since [v5]
> - Move reserve_crashkernel_low() into kernel/crash_core.c.
> - Delete crashkernel=X,high.
> - Modify crashkernel=X,low.
> If crashkernel=X,low is specified simultaneously, reserve spcified size low
> memory for crash kdump kernel devices firstly and then reserve memory above 4G.
> In addition, rename crashk_low_res as "Crash kernel (low)" for arm64, and then
> pass to crash dump kernel by DT property "linux,low-memory-range".
> - Update Documentation/admin-guide/kdump/kdump.rst.
> 
> Changes since [v4]
> - Reimplement memblock_cap_memory_ranges for multiple ranges by Mike.
> 
> Changes since [v3]
> - Add memblock_cap_memory_ranges back for multiple ranges.
> - Fix some compiling warnings.
> 
> Changes since [v2]
> - Split patch "arm64: kdump: support reserving crashkernel above 4G" as
> two. Put "move reserve_crashkernel_low() into kexec_core.c" in a separate
> patch.
> 
> Changes since [v1]:
> - Move common reserve_crashkernel_low() code into kernel/kexec_core.c.
> - Remove memblock_cap_memory_ranges() i added in v1 and implement that
> in fdt_enforce_memory_region().
> There are at most two crash kernel regions, for two crash kernel regions
> case, we cap the memory range [min(regs[*].start), max(regs[*].end)]
> and then remove the memory range in the middle.
> 
> [1]: http://lists.infradead.org/pipermail/kexec/2020-June/020737.html
> [2]: https://github.com/robherring/dt-schema/pull/19 
> [v1]: https://lkml.org/lkml/2019/4/2/1174
> [v2]: https://lkml.org/lkml/2019/4/9/86
> [v3]: https://lkml.org/lkml/2019/4/9/306
> [v4]: https://lkml.org/lkml/2019/4/15/273
> [v5]: https://lkml.org/lkml/2019/5/6/1360
> [v6]: https://lkml.org/lkml/2019/8/30/142
> [v7]: https://lkml.org/lkml/2019/12/23/411
> [v8]: https://lkml.org/lkml/2020/5/21/213
> [v9]: https://lkml.org/lkml/2020/6/28/73
> [v10]: https://lkml.org/lkml/2020/7/2/1443
> [v11]: https://lkml.org/lkml/2020/8/1/150
> [v12]: https://lkml.org/lkml/2020/9/7/1037
> 
> Chen Zhou (8):
>   x86: kdump: replace the hard-coded alignment with macro CRASH_ALIGN
>   x86: kdump: make the lower bound of crash kernel reservation
>     consistent
>   x86: kdump: use macro CRASH_ADDR_LOW_MAX in functions
>     reserve_crashkernel()
>   x86: kdump: move reserve_crashkernel[_low]() into crash_core.c
>   arm64: kdump: introduce some macroes for crash kernel reservation
>   arm64: kdump: reimplement crashkernel=X
>   arm64: kdump: add memory for devices by DT property
>     linux,usable-memory-range
>   kdump: update Documentation about crashkernel
> 
>  Documentation/admin-guide/kdump/kdump.rst     |  23 ++-
>  .../admin-guide/kernel-parameters.txt         |  12 +-
>  arch/arm64/include/asm/kexec.h                |  15 ++
>  arch/arm64/include/asm/processor.h            |   1 +
>  arch/arm64/kernel/setup.c                     |  13 +-
>  arch/arm64/mm/init.c                          | 105 ++++-------
>  arch/arm64/mm/mmu.c                           |   4 +
>  arch/x86/include/asm/kexec.h                  |  28 +++
>  arch/x86/kernel/setup.c                       | 153 +---------------
>  include/linux/crash_core.h                    |   4 +
>  include/linux/kexec.h                         |   2 -
>  kernel/crash_core.c                           | 168 ++++++++++++++++++
>  kernel/kexec_core.c                           |  17 --
>  13 files changed, 301 insertions(+), 244 deletions(-)
> 
> -- 
> 2.20.1
> 


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2020-11-11  3:02 UTC|newest]

Thread overview: 79+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-31  7:44 [PATCH v13 0/8] support reserving crashkernel above 4G on arm64 kdump Chen Zhou
2020-10-31  7:44 ` Chen Zhou
2020-10-31  7:44 ` Chen Zhou
2020-10-31  7:44 ` [PATCH v13 1/8] x86: kdump: replace the hard-coded alignment with macro CRASH_ALIGN Chen Zhou
2020-10-31  7:44   ` Chen Zhou
2020-10-31  7:44   ` Chen Zhou
2020-11-11  1:38   ` Baoquan He
2020-11-11  1:38     ` Baoquan He
2020-11-11  1:38     ` Baoquan He
2020-11-11 13:26     ` chenzhou
2020-11-11 13:26       ` chenzhou
2020-11-11 13:26       ` chenzhou
2020-11-12  7:58   ` Mike Rapoport
2020-11-12  7:58     ` Mike Rapoport
2020-11-12  7:58     ` Mike Rapoport
2020-11-12  8:12     ` chenzhou
2020-11-12  8:12       ` chenzhou
2020-11-12  8:12       ` chenzhou
2020-10-31  7:44 ` [PATCH v13 2/8] x86: kdump: make the lower bound of crash kernel reservation consistent Chen Zhou
2020-10-31  7:44   ` Chen Zhou
2020-10-31  7:44   ` Chen Zhou
2020-10-31  7:44 ` [PATCH v13 3/8] x86: kdump: use macro CRASH_ADDR_LOW_MAX in functions reserve_crashkernel() Chen Zhou
2020-10-31  7:44   ` Chen Zhou
2020-10-31  7:44   ` Chen Zhou
2020-10-31  7:44 ` [PATCH v13 4/8] x86: kdump: move reserve_crashkernel[_low]() into crash_core.c Chen Zhou
2020-10-31  7:44   ` Chen Zhou
2020-10-31  7:44   ` Chen Zhou
2020-11-11 13:20   ` kernel test robot
2020-11-12  8:17     ` chenzhou
2020-11-12  9:39       ` Mike Rapoport
2020-11-12 13:04         ` chenzhou
2020-11-12  8:11   ` Mike Rapoport
2020-11-12  8:11     ` Mike Rapoport
2020-11-12  8:11     ` Mike Rapoport
2020-11-12 13:01     ` chenzhou
2020-11-12 13:01       ` chenzhou
2020-11-12 13:01       ` chenzhou
2020-10-31  7:44 ` [PATCH v13 5/8] arm64: kdump: introduce some macroes for crash kernel reservation Chen Zhou
2020-10-31  7:44   ` Chen Zhou
2020-10-31  7:44   ` Chen Zhou
2020-10-31  7:44 ` [PATCH v13 6/8] arm64: kdump: reimplement crashkernel=X Chen Zhou
2020-10-31  7:44   ` Chen Zhou
2020-10-31  7:44   ` Chen Zhou
2020-11-11  1:59   ` Baoquan He
2020-11-11  1:59     ` Baoquan He
2020-11-11  1:59     ` Baoquan He
2020-11-11 13:27     ` chenzhou
2020-11-11 13:27       ` chenzhou
2020-11-11 13:27       ` chenzhou
2020-11-11 13:54       ` Baoquan He
2020-11-11 13:54         ` Baoquan He
2020-11-11 13:54         ` Baoquan He
2020-11-12  8:25         ` Mike Rapoport
2020-11-12  8:25           ` Mike Rapoport
2020-11-12  8:25           ` Mike Rapoport
2020-11-12  8:36           ` Baoquan He
2020-11-12  8:36             ` Baoquan He
2020-11-12  8:36             ` Baoquan He
2020-11-12 13:11             ` chenzhou
2020-11-12 13:11               ` chenzhou
2020-11-12 13:11               ` chenzhou
2020-10-31  7:44 ` [PATCH v13 7/8] arm64: kdump: add memory for devices by DT property linux, usable-memory-range Chen Zhou
2020-10-31  7:44   ` Chen Zhou
2020-10-31  7:44   ` [PATCH v13 7/8] arm64: kdump: add memory for devices by DT property linux,usable-memory-range Chen Zhou
2020-10-31  7:44 ` [PATCH v13 8/8] kdump: update Documentation about crashkernel Chen Zhou
2020-10-31  7:44   ` Chen Zhou
2020-10-31  7:44   ` Chen Zhou
2020-11-09 12:34 ` [PATCH v13 0/8] support reserving crashkernel above 4G on arm64 kdump chenzhou
2020-11-09 12:34   ` chenzhou
2020-11-09 12:34   ` chenzhou
2020-11-11  3:01 ` Baoquan He [this message]
2020-11-11  3:01   ` Baoquan He
2020-11-11  3:01   ` Baoquan He
2020-11-11 13:29   ` chenzhou
2020-11-11 13:29     ` chenzhou
2020-11-11 13:29     ` chenzhou
2020-11-11 19:41     ` Bhupesh SHARMA
2020-11-11 19:41       ` Bhupesh SHARMA
2020-11-11 19:41       ` Bhupesh SHARMA

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201111030136.GD8486@MiWiFi-R3L-srv \
    --to=bhe@redhat.com \
    --cc=John.P.donnelly@oracle.com \
    --cc=arnd@arndb.de \
    --cc=bhsharma@redhat.com \
    --cc=catalin.marinas@arm.com \
    --cc=chenzhou10@huawei.com \
    --cc=corbet@lwn.net \
    --cc=dyoung@redhat.com \
    --cc=guohanjun@huawei.com \
    --cc=horms@verge.net.au \
    --cc=huawei.libin@huawei.com \
    --cc=james.morse@arm.com \
    --cc=kexec@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=nsaenzjulienne@suse.de \
    --cc=prabhakar.pkin@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=wangkefeng.wang@huawei.com \
    --cc=will@kernel.org \
    --cc=xiexiuqi@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.