[PATCH mvebu-dt v3 0/7] Turris Omnia device-tree changes

["Marek Behún" <kabel@kernel.org>]

Hi Gregory,

v3 of series with changes for Turris Omnia device tree.

Changes since v2 (mostly thanks to Andreas):
- fixed typo in 2/7
- updated comment in 4/7 (describing current SFP cage binding status)
- changed commit message in 4/7 a little bit
- changed LED_FUNCTION_DEBUG to LED_FUNCTION_INDICATOR in 5/7
- updated comment about LED controller in 5/7
- added 7/7 which removes 2 unneeded status = "okay"

Changes since v1:
- added patch which adds description for switch interrupt
- removed patch adding ethernet-phy interrupt: the PHY interrupt is
  asserted by level low, but the GPIO expander driver supports only
  edge rising/falling, and even then it may not be correct when an
  interrupt storm occurs. So keep polling the PHY
- added Andrew's Reviewed-by tags

Cc: linux-arm-kernel@lists.infradead.org
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org

Marek Behún (7):
  ARM: dts: turris-omnia: enable HW buffer management
  ARM: dts: turris-omnia: add comphy handle to eth2
  ARM: dts: turris-omnia: describe switch interrupt
  ARM: dts: turris-omnia: add SFP node
  ARM: dts: turris-omnia: add LED controller node
  ARM: dts: turris-omnia: update ethernet-phy node and handle name
  ARM: dts: turris-omnia: remove unneeded status = "okay" properties

 arch/arm/boot/dts/armada-385-turris-omnia.dts | 178 +++++++++++++++++-
 1 file changed, 170 insertions(+), 8 deletions(-)

-- 
2.26.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel