[PATCH v1] i2c: ismt: Adding support for I2C_SMBUS_BLOCK_PROC_CALL

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

From: Mario Alejandro Posso Escobar <mario.posso.escobar@intel.com>

Expand the driver to support I2C_SMBUS_BLOCK_PROC_CALL since
HW supports it already.

Co-developed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mario Alejandro Posso Escobar <mario.posso.escobar@intel.com>
---
 drivers/i2c/busses/i2c-ismt.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c
index a35a27c320e7..a6187cbec2c9 100644
--- a/drivers/i2c/busses/i2c-ismt.c
+++ b/drivers/i2c/busses/i2c-ismt.c
@@ -53,7 +53,7 @@
  *  Features supported by this driver:
  *  Hardware PEC                     yes
  *  Block buffer                     yes
- *  Block process call transaction   no
+ *  Block process call transaction   yes
  *  Slave mode                       no
  */
 
@@ -332,7 +332,8 @@ static int ismt_process_desc(const struct ismt_desc *desc,
 
 	if (desc->status & ISMT_DESC_SCS) {
 		if (read_write == I2C_SMBUS_WRITE &&
-		    size != I2C_SMBUS_PROC_CALL)
+		    size != I2C_SMBUS_PROC_CALL &&
+		    size != I2C_SMBUS_BLOCK_PROC_CALL)
 			return 0;
 
 		switch (size) {
@@ -345,6 +346,7 @@ static int ismt_process_desc(const struct ismt_desc *desc,
 			data->word = dma_buffer[0] | (dma_buffer[1] << 8);
 			break;
 		case I2C_SMBUS_BLOCK_DATA:
+		case I2C_SMBUS_BLOCK_PROC_CALL:
 			if (desc->rxbytes != dma_buffer[0] + 1)
 				return -EMSGSIZE;
 
@@ -518,6 +520,18 @@ static int ismt_access(struct i2c_adapter *adap, u16 addr,
 		}
 		break;
 
+	case I2C_SMBUS_BLOCK_PROC_CALL:
+		dev_dbg(dev, "I2C_SMBUS_BLOCK_PROC_CALL\n");
+		dma_size = I2C_SMBUS_BLOCK_MAX;
+		desc->tgtaddr_rw = ISMT_DESC_ADDR_RW(addr, 1);
+		desc->wr_len_cmd = data->block[0] + 1;
+		desc->rd_len = dma_size;
+		desc->control |= ISMT_DESC_BLK;
+		dma_direction = DMA_BIDIRECTIONAL;
+		dma_buffer[0] = command;
+		memcpy(&dma_buffer[1], &data->block[1], data->block[0]);
+		break;
+
 	case I2C_SMBUS_I2C_BLOCK_DATA:
 		/* Make sure the length is valid */
 		if (data->block[0] < 1)
@@ -624,6 +638,7 @@ static u32 ismt_func(struct i2c_adapter *adap)
 	       I2C_FUNC_SMBUS_BYTE_DATA		|
 	       I2C_FUNC_SMBUS_WORD_DATA		|
 	       I2C_FUNC_SMBUS_PROC_CALL		|
+	       I2C_FUNC_SMBUS_BLOCK_PROC_CALL	|
 	       I2C_FUNC_SMBUS_BLOCK_DATA	|
 	       I2C_FUNC_SMBUS_I2C_BLOCK		|
 	       I2C_FUNC_SMBUS_PEC;
-- 
2.28.0