From: Thierry Reding <thierry.reding@gmail.com>
To: kbuild-all@lists.01.org
Subject: Re: [PATCH RFC] pwm: keembay: Fix build failure with -Os
Date: Wed, 18 Nov 2020 19:00:14 +0100 [thread overview]
Message-ID: <20201118180014.GC3552669@ulmo> (raw)
In-Reply-To: <20201116090804.206286-1-u.kleine-koenig@pengutronix.de>
[-- Attachment #1: Type: text/plain, Size: 2125 bytes --]
On Mon, Nov 16, 2020 at 10:08:04AM +0100, Uwe Kleine-König wrote:
> The driver used this construct:
>
> #define KMB_PWM_LEADIN_MASK GENMASK(30, 0)
>
> static inline void keembay_pwm_update_bits(struct keembay_pwm *priv, u32 mask,
> u32 val, u32 offset)
> {
> u32 buff = readl(priv->base + offset);
>
> buff = u32_replace_bits(buff, val, mask);
> writel(buff, priv->base + offset);
> }
>
> ...
> keembay_pwm_update_bits(priv, KMB_PWM_LEADIN_MASK, 0,
> KMB_PWM_LEADIN_OFFSET(pwm->hwpwm));
>
> With CONFIG_CC_OPTIMIZE_FOR_SIZE the compiler (here: gcc 10.2.0) this
> triggers:
>
> In file included from /home/uwe/gsrc/linux/drivers/pwm/pwm-keembay.c:16:
> In function ‘field_multiplier’,
> inlined from ‘keembay_pwm_update_bits’ at /home/uwe/gsrc/linux/include/linux/bitfield.h:124:17:
> /home/uwe/gsrc/linux/include/linux/bitfield.h:119:3: error: call to ‘__bad_mask’ declared with attribute error: bad bitfield mask
> 119 | __bad_mask();
> | ^~~~~~~~~~~~
> In function ‘field_multiplier’,
> inlined from ‘keembay_pwm_update_bits’ at /home/uwe/gsrc/linux/include/linux/bitfield.h:154:1:
> /home/uwe/gsrc/linux/include/linux/bitfield.h:119:3: error: call to ‘__bad_mask’ declared with attribute error: bad bitfield mask
> 119 | __bad_mask();
> | ^~~~~~~~~~~~
>
> The compiler doesn't seem to be able to notice that with field being
> 0x3ffffff the expression
>
> if ((field | (field - 1)) & ((field | (field - 1)) + 1))
> __bad_mask();
>
> can be optimized away.
>
> So use __always_inline and document the problem in a comment to fix
> this.
>
> Reported-by: kernel test robot <lkp@intel.com>
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> ---
> Hello,
>
> I'm not sure this is the right fix. Maybe the bitfield stuff can be
> changed somehow to make this problem go away, too?
>
> Best regards
> Uwe
>
> drivers/pwm/pwm-keembay.c | 7 ++++++-
> 1 file changed, 6 insertions(+), 1 deletion(-)
Applied, thanks.
Thierry
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: Thierry Reding <thierry.reding@gmail.com>
To: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
Cc: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com>,
kbuild-all@lists.01.org,
Linux Memory Management List <linux-mm@kvack.org>,
"Lai, Poey Seng" <poey.seng.lai@intel.com>,
"Vineetha G. Jaya Kumaran" <vineetha.g.jaya.kumaran@intel.com>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
linux-kernel@vger.kernel.org, kernel@pengutronix.de,
kernel test robot <lkp@intel.com>
Subject: Re: [PATCH RFC] pwm: keembay: Fix build failure with -Os
Date: Wed, 18 Nov 2020 19:00:14 +0100 [thread overview]
Message-ID: <20201118180014.GC3552669@ulmo> (raw)
In-Reply-To: <20201116090804.206286-1-u.kleine-koenig@pengutronix.de>
[-- Attachment #1: Type: text/plain, Size: 2125 bytes --]
On Mon, Nov 16, 2020 at 10:08:04AM +0100, Uwe Kleine-König wrote:
> The driver used this construct:
>
> #define KMB_PWM_LEADIN_MASK GENMASK(30, 0)
>
> static inline void keembay_pwm_update_bits(struct keembay_pwm *priv, u32 mask,
> u32 val, u32 offset)
> {
> u32 buff = readl(priv->base + offset);
>
> buff = u32_replace_bits(buff, val, mask);
> writel(buff, priv->base + offset);
> }
>
> ...
> keembay_pwm_update_bits(priv, KMB_PWM_LEADIN_MASK, 0,
> KMB_PWM_LEADIN_OFFSET(pwm->hwpwm));
>
> With CONFIG_CC_OPTIMIZE_FOR_SIZE the compiler (here: gcc 10.2.0) this
> triggers:
>
> In file included from /home/uwe/gsrc/linux/drivers/pwm/pwm-keembay.c:16:
> In function ‘field_multiplier’,
> inlined from ‘keembay_pwm_update_bits’ at /home/uwe/gsrc/linux/include/linux/bitfield.h:124:17:
> /home/uwe/gsrc/linux/include/linux/bitfield.h:119:3: error: call to ‘__bad_mask’ declared with attribute error: bad bitfield mask
> 119 | __bad_mask();
> | ^~~~~~~~~~~~
> In function ‘field_multiplier’,
> inlined from ‘keembay_pwm_update_bits’ at /home/uwe/gsrc/linux/include/linux/bitfield.h:154:1:
> /home/uwe/gsrc/linux/include/linux/bitfield.h:119:3: error: call to ‘__bad_mask’ declared with attribute error: bad bitfield mask
> 119 | __bad_mask();
> | ^~~~~~~~~~~~
>
> The compiler doesn't seem to be able to notice that with field being
> 0x3ffffff the expression
>
> if ((field | (field - 1)) & ((field | (field - 1)) + 1))
> __bad_mask();
>
> can be optimized away.
>
> So use __always_inline and document the problem in a comment to fix
> this.
>
> Reported-by: kernel test robot <lkp@intel.com>
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> ---
> Hello,
>
> I'm not sure this is the right fix. Maybe the bitfield stuff can be
> changed somehow to make this problem go away, too?
>
> Best regards
> Uwe
>
> drivers/pwm/pwm-keembay.c | 7 ++++++-
> 1 file changed, 6 insertions(+), 1 deletion(-)
Applied, thanks.
Thierry
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2020-11-18 18:00 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-15 19:58 [linux-next:master 4911/5794] include/linux/bitfield.h:119:3: error: call to '__bad_mask' declared with attribute error: bad bitfield mask kernel test robot
2020-11-15 19:58 ` kernel test robot
2020-11-16 9:08 ` [PATCH RFC] pwm: keembay: Fix build failure with -Os Uwe Kleine-König
2020-11-16 9:08 ` Uwe Kleine-König
2020-11-17 17:29 ` Ayyathurai, Vijayakannan
2020-11-17 17:29 ` Ayyathurai, Vijayakannan
2020-11-18 9:48 ` Uwe Kleine-König
2020-11-18 9:48 ` Uwe Kleine-König
2020-11-18 10:06 ` Uwe Kleine-König
2020-11-18 10:06 ` Uwe Kleine-König
2020-11-18 17:41 ` Ayyathurai, Vijayakannan
2020-11-18 17:41 ` Ayyathurai, Vijayakannan
2020-11-18 18:01 ` Thierry Reding
2020-11-18 18:01 ` Thierry Reding
2020-11-18 18:00 ` Thierry Reding [this message]
2020-11-18 18:00 ` Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201118180014.GC3552669@ulmo \
--to=thierry.reding@gmail.com \
--cc=kbuild-all@lists.01.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.