From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Nicholas Piggin <npiggin@gmail.com>
Subject: [PATCH v3 17/19] powerpc/64s: move NMI soft-mask handling to C
Date: Sun, 29 Nov 2020 00:41:12 +1000 [thread overview]
Message-ID: <20201128144114.944000-18-npiggin@gmail.com> (raw)
In-Reply-To: <20201128144114.944000-1-npiggin@gmail.com>
Saving and restoring soft-mask state can now be done in C using the
interrupt handler wrapper functions.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/include/asm/interrupt.h | 26 ++++++++++++
arch/powerpc/kernel/exceptions-64s.S | 60 ----------------------------
2 files changed, 26 insertions(+), 60 deletions(-)
diff --git a/arch/powerpc/include/asm/interrupt.h b/arch/powerpc/include/asm/interrupt.h
index 8508b99d3455..5da7b0de545e 100644
--- a/arch/powerpc/include/asm/interrupt.h
+++ b/arch/powerpc/include/asm/interrupt.h
@@ -96,6 +96,10 @@ static inline void interrupt_async_exit_prepare(struct pt_regs *regs, struct int
struct interrupt_nmi_state {
#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S_64
+ u8 irq_soft_mask;
+ u8 irq_happened;
+#endif
u8 ftrace_enabled;
#endif
};
@@ -103,6 +107,21 @@ struct interrupt_nmi_state {
static inline void interrupt_nmi_enter_prepare(struct pt_regs *regs, struct interrupt_nmi_state *state)
{
#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S_64
+ state->irq_soft_mask = local_paca->irq_soft_mask;
+ state->irq_happened = local_paca->irq_happened;
+
+ /*
+ * Set IRQS_ALL_DISABLED unconditionally so irqs_disabled() does
+ * the right thing, and set IRQ_HARD_DIS. We do not want to reconcile
+ * because that goes through irq tracing which we don't want in NMI.
+ */
+ local_paca->irq_soft_mask = IRQS_ALL_DISABLED;
+ local_paca->irq_happened |= PACA_IRQ_HARD_DIS;
+
+ /* Don't do any per-CPU operations until interrupt state is fixed */
+ state->ftrace_enabled = this_cpu_get_ftrace_enabled();
+#endif
state->ftrace_enabled = this_cpu_get_ftrace_enabled();
this_cpu_set_ftrace_enabled(0);
#endif
@@ -126,6 +145,13 @@ static inline void interrupt_nmi_exit_prepare(struct pt_regs *regs, struct inter
#ifdef CONFIG_PPC64
this_cpu_set_ftrace_enabled(state->ftrace_enabled);
+
+#ifdef CONFIG_PPC_BOOK3S_64
+ /* Check we didn't change the pending interrupt mask. */
+ WARN_ON_ONCE((state->irq_happened | PACA_IRQ_HARD_DIS) != local_paca->irq_happened);
+ local_paca->irq_happened = state->irq_happened;
+ local_paca->irq_soft_mask = state->irq_soft_mask;
+#endif
#endif
}
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 2b447dd15d4c..b6d914db01da 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -1008,20 +1008,6 @@ EXC_COMMON_BEGIN(system_reset_common)
ld r1,PACA_NMI_EMERG_SP(r13)
subi r1,r1,INT_FRAME_SIZE
__GEN_COMMON_BODY system_reset
- /*
- * Set IRQS_ALL_DISABLED unconditionally so irqs_disabled() does
- * the right thing. We do not want to reconcile because that goes
- * through irq tracing which we don't want in NMI.
- *
- * Save PACAIRQHAPPENED to RESULT (otherwise unused), and set HARD_DIS
- * as we are running with MSR[EE]=0.
- */
- li r10,IRQS_ALL_DISABLED
- stb r10,PACAIRQSOFTMASK(r13)
- lbz r10,PACAIRQHAPPENED(r13)
- std r10,RESULT(r1)
- ori r10,r10,PACA_IRQ_HARD_DIS
- stb r10,PACAIRQHAPPENED(r13)
addi r3,r1,STACK_FRAME_OVERHEAD
bl system_reset_exception
@@ -1037,14 +1023,6 @@ EXC_COMMON_BEGIN(system_reset_common)
subi r10,r10,1
sth r10,PACA_IN_NMI(r13)
- /*
- * Restore soft mask settings.
- */
- ld r10,RESULT(r1)
- stb r10,PACAIRQHAPPENED(r13)
- ld r10,SOFTE(r1)
- stb r10,PACAIRQSOFTMASK(r13)
-
kuap_restore_amr r9, r10
EXCEPTION_RESTORE_REGS
RFI_TO_USER_OR_KERNEL
@@ -1190,30 +1168,11 @@ END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
li r10,MSR_RI
mtmsrd r10,1
- /*
- * Set IRQS_ALL_DISABLED and save PACAIRQHAPPENED (see
- * system_reset_common)
- */
- li r10,IRQS_ALL_DISABLED
- stb r10,PACAIRQSOFTMASK(r13)
- lbz r10,PACAIRQHAPPENED(r13)
- std r10,RESULT(r1)
- ori r10,r10,PACA_IRQ_HARD_DIS
- stb r10,PACAIRQHAPPENED(r13)
-
addi r3,r1,STACK_FRAME_OVERHEAD
bl machine_check_early
std r3,RESULT(r1) /* Save result */
ld r12,_MSR(r1)
- /*
- * Restore soft mask settings.
- */
- ld r10,RESULT(r1)
- stb r10,PACAIRQHAPPENED(r13)
- ld r10,SOFTE(r1)
- stb r10,PACAIRQSOFTMASK(r13)
-
#ifdef CONFIG_PPC_P7_NAP
/*
* Check if thread was in power saving mode. We come here when any
@@ -2815,17 +2774,6 @@ EXC_COMMON_BEGIN(soft_nmi_common)
subi r1,r1,INT_FRAME_SIZE
__GEN_COMMON_BODY soft_nmi
- /*
- * Set IRQS_ALL_DISABLED and save PACAIRQHAPPENED (see
- * system_reset_common)
- */
- li r10,IRQS_ALL_DISABLED
- stb r10,PACAIRQSOFTMASK(r13)
- lbz r10,PACAIRQHAPPENED(r13)
- std r10,RESULT(r1)
- ori r10,r10,PACA_IRQ_HARD_DIS
- stb r10,PACAIRQHAPPENED(r13)
-
addi r3,r1,STACK_FRAME_OVERHEAD
bl soft_nmi_interrupt
@@ -2833,14 +2781,6 @@ EXC_COMMON_BEGIN(soft_nmi_common)
li r9,0
mtmsrd r9,1
- /*
- * Restore soft mask settings.
- */
- ld r10,RESULT(r1)
- stb r10,PACAIRQHAPPENED(r13)
- ld r10,SOFTE(r1)
- stb r10,PACAIRQSOFTMASK(r13)
-
kuap_restore_amr r9, r10
EXCEPTION_RESTORE_REGS hsrr=0
RFI_TO_KERNEL
--
2.23.0
next prev parent reply other threads:[~2020-11-28 15:12 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-28 14:40 [PATCH v3 00/19] powerpc: interrupt wrappers Nicholas Piggin
2020-11-28 14:40 ` [PATCH v3 01/19] powerpc/64s: move the last of the page fault handling logic to C Nicholas Piggin
2020-11-30 7:35 ` Aneesh Kumar K.V
2020-11-28 14:40 ` [PATCH v3 02/19] powerpc: remove arguments from fault handler functions Nicholas Piggin
2020-11-30 7:35 ` Aneesh Kumar K.V
2020-11-28 14:40 ` [PATCH v3 03/19] powerpc: bad_page_fault, do_break get registers from regs Nicholas Piggin
2020-11-30 7:36 ` Aneesh Kumar K.V
2020-12-22 14:42 ` Christophe Leroy
2020-12-26 8:19 ` Nicholas Piggin
2020-12-26 10:58 ` Nicholas Piggin
2020-11-28 14:40 ` [PATCH v3 04/19] powerpc/perf: move perf irq/nmi handling details into traps.c Nicholas Piggin
2020-12-16 7:17 ` Athira Rajeev
2020-11-28 14:41 ` [PATCH v3 05/19] powerpc: interrupt handler wrapper functions Nicholas Piggin
2020-11-30 7:37 ` Aneesh Kumar K.V
2020-12-04 8:31 ` Nicholas Piggin
2020-11-28 14:41 ` [PATCH v3 06/19] powerpc: add interrupt wrapper entry / exit stub functions Nicholas Piggin
2020-11-28 14:41 ` [PATCH v3 07/19] powerpc: add interrupt_cond_local_irq_enable helper Nicholas Piggin
2020-11-28 14:41 ` [PATCH v3 08/19] powerpc/64: context tracking remove _TIF_NOHZ Nicholas Piggin
2020-11-28 14:41 ` [PATCH v3 09/19] powerpc/64: context tracking move to interrupt wrappers Nicholas Piggin
2020-11-28 14:41 ` [PATCH v3 10/19] powerpc/64: add context tracking to asynchronous interrupts Nicholas Piggin
2020-11-28 14:41 ` [PATCH v3 11/19] powerpc: handle irq_enter/irq_exit in interrupt handler wrappers Nicholas Piggin
2020-11-28 14:41 ` [PATCH v3 12/19] powerpc/64s: move context tracking exit to interrupt exit path Nicholas Piggin
2020-11-28 14:41 ` [PATCH v3 13/19] powerpc/64s: reconcile interrupts in C Nicholas Piggin
2020-11-28 14:41 ` [PATCH v3 14/19] powerpc/64: move account_stolen_time into its own function Nicholas Piggin
2020-11-28 14:41 ` [PATCH v3 15/19] powerpc/64: entry cpu time accounting in C Nicholas Piggin
2020-11-28 14:41 ` [PATCH v3 16/19] powerpc: move NMI entry/exit code into wrapper Nicholas Piggin
2020-11-28 14:41 ` Nicholas Piggin [this message]
2020-11-28 14:41 ` [PATCH v3 18/19] powerpc/64s: runlatch interrupt handling in C Nicholas Piggin
2020-11-28 14:41 ` [PATCH v3 19/19] powerpc/64s: power4 nap fixup " Nicholas Piggin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201128144114.944000-18-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.