From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Nicholas Piggin <npiggin@gmail.com>
Subject: [PATCH v3 06/19] powerpc: add interrupt wrapper entry / exit stub functions
Date: Sun, 29 Nov 2020 00:41:01 +1000 [thread overview]
Message-ID: <20201128144114.944000-7-npiggin@gmail.com> (raw)
In-Reply-To: <20201128144114.944000-1-npiggin@gmail.com>
These will be used by subsequent patches.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/include/asm/interrupt.h | 66 ++++++++++++++++++++++++++++
1 file changed, 66 insertions(+)
diff --git a/arch/powerpc/include/asm/interrupt.h b/arch/powerpc/include/asm/interrupt.h
index 5f6eeb6d43f2..516b32f5b3cc 100644
--- a/arch/powerpc/include/asm/interrupt.h
+++ b/arch/powerpc/include/asm/interrupt.h
@@ -5,6 +5,50 @@
#include <linux/context_tracking.h>
#include <asm/ftrace.h>
+struct interrupt_state {
+};
+
+static inline void interrupt_enter_prepare(struct pt_regs *regs, struct interrupt_state *state)
+{
+}
+
+/*
+ * Care should be taken to note that interrupt_exit_prepare and
+ * interrupt_async_exit_prepare do not necessarily return immediately to
+ * regs context (e.g., if regs is usermode, we don't necessarily return to
+ * user mode). Other interrupts might be taken between here and return,
+ * context switch / preemption may occur in the exit path after this, or a
+ * signal may be delivered, etc.
+ *
+ * The real interrupt exit code is platform specific, e.g.,
+ * interrupt_exit_user_prepare / interrupt_exit_kernel_prepare for 64s.
+ *
+ * However interrupt_nmi_exit_prepare does return directly to regs, because
+ * NMIs do not do "exit work" or replay soft-masked interrupts.
+ */
+static inline void interrupt_exit_prepare(struct pt_regs *regs, struct interrupt_state *state)
+{
+}
+
+static inline void interrupt_async_enter_prepare(struct pt_regs *regs, struct interrupt_state *state)
+{
+}
+
+static inline void interrupt_async_exit_prepare(struct pt_regs *regs, struct interrupt_state *state)
+{
+}
+
+struct interrupt_nmi_state {
+};
+
+static inline void interrupt_nmi_enter_prepare(struct pt_regs *regs, struct interrupt_nmi_state *state)
+{
+}
+
+static inline void interrupt_nmi_exit_prepare(struct pt_regs *regs, struct interrupt_nmi_state *state)
+{
+}
+
/**
* DECLARE_INTERRUPT_HANDLER_RAW - Declare raw interrupt handler function
* @func: Function name of the entry point
@@ -59,7 +103,13 @@ static __always_inline void ___##func(struct pt_regs *regs); \
\
__visible noinstr void func(struct pt_regs *regs) \
{ \
+ struct interrupt_state state; \
+ \
+ interrupt_enter_prepare(regs, &state); \
+ \
___##func (regs); \
+ \
+ interrupt_exit_prepare(regs, &state); \
} \
\
static __always_inline void ___##func(struct pt_regs *regs)
@@ -87,10 +137,15 @@ static __always_inline long ___##func(struct pt_regs *regs); \
\
__visible noinstr long func(struct pt_regs *regs) \
{ \
+ struct interrupt_state state; \
long ret; \
\
+ interrupt_enter_prepare(regs, &state); \
+ \
ret = ___##func (regs); \
\
+ interrupt_exit_prepare(regs, &state); \
+ \
return ret; \
} \
\
@@ -117,7 +172,13 @@ static __always_inline void ___##func(struct pt_regs *regs); \
\
__visible noinstr void func(struct pt_regs *regs) \
{ \
+ struct interrupt_state state; \
+ \
+ interrupt_async_enter_prepare(regs, &state); \
+ \
___##func (regs); \
+ \
+ interrupt_async_exit_prepare(regs, &state); \
} \
\
static __always_inline void ___##func(struct pt_regs *regs)
@@ -145,10 +206,15 @@ static __always_inline long ___##func(struct pt_regs *regs); \
\
__visible noinstr long func(struct pt_regs *regs) \
{ \
+ struct interrupt_nmi_state state; \
long ret; \
\
+ interrupt_nmi_enter_prepare(regs, &state); \
+ \
ret = ___##func (regs); \
\
+ interrupt_nmi_exit_prepare(regs, &state); \
+ \
return ret; \
} \
\
--
2.23.0
next prev parent reply other threads:[~2020-11-28 14:53 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-28 14:40 [PATCH v3 00/19] powerpc: interrupt wrappers Nicholas Piggin
2020-11-28 14:40 ` [PATCH v3 01/19] powerpc/64s: move the last of the page fault handling logic to C Nicholas Piggin
2020-11-30 7:35 ` Aneesh Kumar K.V
2020-11-28 14:40 ` [PATCH v3 02/19] powerpc: remove arguments from fault handler functions Nicholas Piggin
2020-11-30 7:35 ` Aneesh Kumar K.V
2020-11-28 14:40 ` [PATCH v3 03/19] powerpc: bad_page_fault, do_break get registers from regs Nicholas Piggin
2020-11-30 7:36 ` Aneesh Kumar K.V
2020-12-22 14:42 ` Christophe Leroy
2020-12-26 8:19 ` Nicholas Piggin
2020-12-26 10:58 ` Nicholas Piggin
2020-11-28 14:40 ` [PATCH v3 04/19] powerpc/perf: move perf irq/nmi handling details into traps.c Nicholas Piggin
2020-12-16 7:17 ` Athira Rajeev
2020-11-28 14:41 ` [PATCH v3 05/19] powerpc: interrupt handler wrapper functions Nicholas Piggin
2020-11-30 7:37 ` Aneesh Kumar K.V
2020-12-04 8:31 ` Nicholas Piggin
2020-11-28 14:41 ` Nicholas Piggin [this message]
2020-11-28 14:41 ` [PATCH v3 07/19] powerpc: add interrupt_cond_local_irq_enable helper Nicholas Piggin
2020-11-28 14:41 ` [PATCH v3 08/19] powerpc/64: context tracking remove _TIF_NOHZ Nicholas Piggin
2020-11-28 14:41 ` [PATCH v3 09/19] powerpc/64: context tracking move to interrupt wrappers Nicholas Piggin
2020-11-28 14:41 ` [PATCH v3 10/19] powerpc/64: add context tracking to asynchronous interrupts Nicholas Piggin
2020-11-28 14:41 ` [PATCH v3 11/19] powerpc: handle irq_enter/irq_exit in interrupt handler wrappers Nicholas Piggin
2020-11-28 14:41 ` [PATCH v3 12/19] powerpc/64s: move context tracking exit to interrupt exit path Nicholas Piggin
2020-11-28 14:41 ` [PATCH v3 13/19] powerpc/64s: reconcile interrupts in C Nicholas Piggin
2020-11-28 14:41 ` [PATCH v3 14/19] powerpc/64: move account_stolen_time into its own function Nicholas Piggin
2020-11-28 14:41 ` [PATCH v3 15/19] powerpc/64: entry cpu time accounting in C Nicholas Piggin
2020-11-28 14:41 ` [PATCH v3 16/19] powerpc: move NMI entry/exit code into wrapper Nicholas Piggin
2020-11-28 14:41 ` [PATCH v3 17/19] powerpc/64s: move NMI soft-mask handling to C Nicholas Piggin
2020-11-28 14:41 ` [PATCH v3 18/19] powerpc/64s: runlatch interrupt handling in C Nicholas Piggin
2020-11-28 14:41 ` [PATCH v3 19/19] powerpc/64s: power4 nap fixup " Nicholas Piggin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201128144114.944000-7-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.