From: Krzysztof Kozlowski <krzk@kernel.org>
To: Jagan Teki <jagan@amarulasolutions.com>
Cc: devicetree@vger.kernel.org, Matteo Lisi <matteo.lisi@engicam.com>,
Shawn Guo <shawnguo@kernel.org>,
linux-kernel@vger.kernel.org, Li Yang <leoyang.li@nxp.com>,
Rob Herring <robh+dt@kernel.org>,
NXP Linux Team <linux-imx@nxp.com>,
Fabio Estevam <festevam@gmail.com>,
linux-amarula@amarulasolutions.com,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 09/10] dt-bindings: arm: fsl: Add Engicam i.Core MX8M Mini C.TOUCH 2.0 10.1" OF
Date: Wed, 2 Dec 2020 19:40:38 +0200 [thread overview]
Message-ID: <20201202174038.GG3490@kozik-lap> (raw)
In-Reply-To: <20201202121241.109952-10-jagan@amarulasolutions.com>
On Wed, Dec 02, 2020 at 05:42:40PM +0530, Jagan Teki wrote:
> i.Core MX8M Mini is an EDIMM SOM based on NXP i.MX8MM from Engicam.
>
> C.TOUCH 2.0 is a general purpose carrier board with capacitive
> touch interface support.
>
> 10.1" OF is a capacitive touch 10.1" Open Frame panel solutions.
>
> i.Core MX8M Mini needs to mount on top of C.TOUCH 2.0 carrier with
> pluged 10.1" OF for creating complete i.Core MX8M Mini C.TOUCH 2.0
> 10.1" Open Frame solution board.
>
> Add bindings for it.
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Please run the checkpatch - it should complain about order of patches.
> ---
> Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
> index 8c8f7728788d..9e275921112d 100644
> --- a/Documentation/devicetree/bindings/arm/fsl.yaml
> +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
> @@ -669,6 +669,7 @@ properties:
> - beacon,imx8mm-beacon-kit # i.MX8MM Beacon Development Kit
> - engicam,icore-mx8mm # i.MX8MM Engicam i.Core MX8M Mini SOM
> - engicam,icore-mx8mm-ctouch2 # i.MX8MM Engicam i.Core MX8M Mini C.TOUCH 2.0
> + - engicam,icore-mx8mm-ctouch2-of10 # i.MX8MM Engicam i.Core MX8M Mini C.TOUCH 2.0 10.1" Open Frame
Run dtbs_check before posting.
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Jagan Teki <jagan@amarulasolutions.com>
Cc: Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
Li Yang <leoyang.li@nxp.com>, Fabio Estevam <festevam@gmail.com>,
Matteo Lisi <matteo.lisi@engicam.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
NXP Linux Team <linux-imx@nxp.com>,
linux-amarula@amarulasolutions.com
Subject: Re: [PATCH 09/10] dt-bindings: arm: fsl: Add Engicam i.Core MX8M Mini C.TOUCH 2.0 10.1" OF
Date: Wed, 2 Dec 2020 19:40:38 +0200 [thread overview]
Message-ID: <20201202174038.GG3490@kozik-lap> (raw)
In-Reply-To: <20201202121241.109952-10-jagan@amarulasolutions.com>
On Wed, Dec 02, 2020 at 05:42:40PM +0530, Jagan Teki wrote:
> i.Core MX8M Mini is an EDIMM SOM based on NXP i.MX8MM from Engicam.
>
> C.TOUCH 2.0 is a general purpose carrier board with capacitive
> touch interface support.
>
> 10.1" OF is a capacitive touch 10.1" Open Frame panel solutions.
>
> i.Core MX8M Mini needs to mount on top of C.TOUCH 2.0 carrier with
> pluged 10.1" OF for creating complete i.Core MX8M Mini C.TOUCH 2.0
> 10.1" Open Frame solution board.
>
> Add bindings for it.
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Please run the checkpatch - it should complain about order of patches.
> ---
> Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
> index 8c8f7728788d..9e275921112d 100644
> --- a/Documentation/devicetree/bindings/arm/fsl.yaml
> +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
> @@ -669,6 +669,7 @@ properties:
> - beacon,imx8mm-beacon-kit # i.MX8MM Beacon Development Kit
> - engicam,icore-mx8mm # i.MX8MM Engicam i.Core MX8M Mini SOM
> - engicam,icore-mx8mm-ctouch2 # i.MX8MM Engicam i.Core MX8M Mini C.TOUCH 2.0
> + - engicam,icore-mx8mm-ctouch2-of10 # i.MX8MM Engicam i.Core MX8M Mini C.TOUCH 2.0 10.1" Open Frame
Run dtbs_check before posting.
Best regards,
Krzysztof
next prev parent reply other threads:[~2020-12-02 17:41 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-02 12:12 [PATCH 00/10] arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini Jagan Teki
2020-12-02 12:12 ` Jagan Teki
2020-12-02 12:12 ` [PATCH 01/10] arm64: defconfig: Enable REGULATOR_PF8X00 Jagan Teki
2020-12-02 12:12 ` Jagan Teki
2020-12-02 17:22 ` Krzysztof Kozlowski
2020-12-02 17:22 ` Krzysztof Kozlowski
2020-12-02 19:21 ` Jagan Teki
2020-12-02 19:21 ` Jagan Teki
2020-12-02 12:12 ` [PATCH 02/10] dt-bindings: arm: fsl: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit Jagan Teki
2020-12-02 12:12 ` Jagan Teki
2020-12-02 12:12 ` [PATCH 03/10] arm64: dts: imx: Add Engicam " Jagan Teki
2020-12-02 12:12 ` Jagan Teki
2020-12-02 17:26 ` Krzysztof Kozlowski
2020-12-02 17:26 ` Krzysztof Kozlowski
2020-12-02 12:12 ` [PATCH 04/10] arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini SOM Jagan Teki
2020-12-02 12:12 ` Jagan Teki
2020-12-02 17:34 ` Krzysztof Kozlowski
2020-12-02 17:34 ` Krzysztof Kozlowski
2020-12-02 19:30 ` Jagan Teki
2020-12-02 19:30 ` Jagan Teki
2020-12-02 19:37 ` Krzysztof Kozlowski
2020-12-02 19:37 ` Krzysztof Kozlowski
2020-12-02 19:40 ` Jagan Teki
2020-12-02 19:40 ` Jagan Teki
2020-12-02 12:12 ` [PATCH 05/10] arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit Jagan Teki
2020-12-02 12:12 ` Jagan Teki
2020-12-02 17:38 ` Krzysztof Kozlowski
2020-12-02 17:38 ` Krzysztof Kozlowski
2020-12-02 12:12 ` [PATCH 06/10] arm64: dts: imx: Add Engicam C.TOUCH 2.0 Jagan Teki
2020-12-02 12:12 ` Jagan Teki
2020-12-02 17:39 ` Krzysztof Kozlowski
2020-12-02 17:39 ` Krzysztof Kozlowski
2020-12-02 12:12 ` [PATCH 07/10] dt-bindings: arm: fsl: Add Engicam i.Core MX8M Mini " Jagan Teki
2020-12-02 12:12 ` Jagan Teki
2020-12-02 17:24 ` Krzysztof Kozlowski
2020-12-02 17:24 ` Krzysztof Kozlowski
2020-12-02 12:12 ` [PATCH 08/10] arm64: dts: imx8mm: " Jagan Teki
2020-12-02 12:12 ` Jagan Teki
2020-12-02 17:45 ` Krzysztof Kozlowski
2020-12-02 17:45 ` Krzysztof Kozlowski
2020-12-02 17:53 ` Fabio Estevam
2020-12-02 17:53 ` Fabio Estevam
2020-12-02 19:20 ` Jagan Teki
2020-12-02 19:20 ` Jagan Teki
2020-12-02 19:25 ` Krzysztof Kozlowski
2020-12-02 19:25 ` Krzysztof Kozlowski
2020-12-02 19:36 ` Jagan Teki
2020-12-02 19:36 ` Jagan Teki
2020-12-02 12:12 ` [PATCH 09/10] dt-bindings: arm: fsl: Add Engicam i.Core MX8M Mini C.TOUCH 2.0 10.1" OF Jagan Teki
2020-12-02 12:12 ` Jagan Teki
2020-12-02 17:40 ` Krzysztof Kozlowski [this message]
2020-12-02 17:40 ` Krzysztof Kozlowski
2020-12-02 12:12 ` [PATCH 10/10] arm64: dts: imx8mm: " Jagan Teki
2020-12-02 12:12 ` Jagan Teki
2020-12-02 17:49 ` Krzysztof Kozlowski
2020-12-02 17:49 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201202174038.GG3490@kozik-lap \
--to=krzk@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=jagan@amarulasolutions.com \
--cc=leoyang.li@nxp.com \
--cc=linux-amarula@amarulasolutions.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=matteo.lisi@engicam.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.