* [PATCH v3 2/2] ARM: dts: qcom: Add SDX55 platform and MTP board support
2020-11-26 8:31 [PATCH v3 0/2] Add devicetree support for SDX55 Modem and MTP Manivannan Sadhasivam
2020-11-26 8:31 ` [PATCH v3 1/2] dt-bindings: arm: qcom: Document SDX55 platform and boards Manivannan Sadhasivam
@ 2020-11-26 8:31 ` Manivannan Sadhasivam
1 sibling, 0 replies; 4+ messages in thread
From: Manivannan Sadhasivam @ 2020-11-26 8:31 UTC (permalink / raw)
To: agross, bjorn.andersson, robh+dt
Cc: vkoul, linux-arm-msm, devicetree, linux-kernel,
Manivannan Sadhasivam
Add basic devicetree support for SDX55 platform and MTP board from
Qualcomm. The SDX55 platform features an ARM Cortex A7 CPU which forms
the Application Processor Sub System (APSS) along with standard Qualcomm
peripherals like GCC, TLMM, BLSP, QPIC, and BAM etc... Also, there
exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
etc..
Currently, this basic devicetree support includes GCC, RPMh clock, INTC
and Debug UART.
Co-developed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/qcom-sdx55-mtp.dts | 27 ++++
arch/arm/boot/dts/qcom-sdx55.dtsi | 193 +++++++++++++++++++++++++++
3 files changed, 222 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/qcom-sdx55-mtp.dts
create mode 100644 arch/arm/boot/dts/qcom-sdx55.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index ce66ffd5a1bb..1505c6cdc5ca 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -917,7 +917,8 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-msm8974-sony-xperia-amami.dtb \
qcom-msm8974-sony-xperia-castor.dtb \
qcom-msm8974-sony-xperia-honami.dtb \
- qcom-mdm9615-wp8548-mangoh-green.dtb
+ qcom-mdm9615-wp8548-mangoh-green.dtb \
+ qcom-sdx55-mtp.dtb
dtb-$(CONFIG_ARCH_RDA) += \
rda8810pl-orangepi-2g-iot.dtb \
rda8810pl-orangepi-i96.dtb
diff --git a/arch/arm/boot/dts/qcom-sdx55-mtp.dts b/arch/arm/boot/dts/qcom-sdx55-mtp.dts
new file mode 100644
index 000000000000..262660e6dd11
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-sdx55-mtp.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2020, Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include "qcom-sdx55.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. SDX55 MTP";
+ compatible = "qcom,sdx55-mtp", "qcom,sdx55";
+ qcom,board-id = <0x5010008 0x0>;
+
+ aliases {
+ serial0 = &blsp1_uart3;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&blsp1_uart3 {
+ status = "ok";
+};
diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
new file mode 100644
index 000000000000..c236faf9726b
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * SDX55 SoC device tree source
+ *
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2020, Linaro Ltd.
+ */
+
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ qcom,msm-id = <357 0x10000>, <368 0x10000>, <418 0x10000>;
+ interrupt-parent = <&intc>;
+
+ memory {
+ device_type = "memory";
+ reg = <0 0>;
+ };
+
+ clocks {
+ xo_board: xo-board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <38400000>;
+ clock-output-names = "xo_board";
+ };
+
+ sleep_clk: sleep-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32000>;
+ };
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x0>;
+ enable-method = "psci";
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ soc: soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "simple-bus";
+
+ gcc: clock-controller@100000 {
+ compatible = "qcom,gcc-sdx55";
+ reg = <0x100000 0x1f0000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ clock-names = "bi_tcxo", "sleep_clk";
+ clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
+ };
+
+ blsp1_uart3: serial@831000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x00831000 0x200>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&gcc 30>,
+ <&gcc 9>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ pdc: interrupt-controller@b210000 {
+ compatible = "qcom,sdx55-pdc", "qcom,pdc";
+ reg = <0x0b210000 0x30000>;
+ qcom,pdc-ranges = <0 179 52>;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&intc>;
+ interrupt-controller;
+ };
+
+ intc: interrupt-controller@17800000 {
+ compatible = "qcom,msm-qgic2";
+ interrupt-controller;
+ interrupt-parent = <&intc>;
+ #interrupt-cells = <3>;
+ reg = <0x17800000 0x1000>,
+ <0x17802000 0x1000>;
+ };
+
+ timer@17820000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x17820000 0x1000>;
+ clock-frequency = <19200000>;
+
+ frame@17821000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 7 0x4>,
+ <GIC_SPI 6 0x4>;
+ reg = <0x17821000 0x1000>,
+ <0x17822000 0x1000>;
+ };
+
+ frame@17823000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 8 0x4>;
+ reg = <0x17823000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17824000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 9 0x4>;
+ reg = <0x17824000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17825000 {
+ frame-number = <3>;
+ interrupts = <GIC_SPI 10 0x4>;
+ reg = <0x17825000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17826000 {
+ frame-number = <4>;
+ interrupts = <GIC_SPI 11 0x4>;
+ reg = <0x17826000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17827000 {
+ frame-number = <5>;
+ interrupts = <GIC_SPI 12 0x4>;
+ reg = <0x17827000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17828000 {
+ frame-number = <6>;
+ interrupts = <GIC_SPI 13 0x4>;
+ reg = <0x17828000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17829000 {
+ frame-number = <7>;
+ interrupts = <GIC_SPI 14 0x4>;
+ reg = <0x17829000 0x1000>;
+ status = "disabled";
+ };
+ };
+
+ apps_rsc: rsc@17840000 {
+ compatible = "qcom,rpmh-rsc";
+ reg = <0x17830000 0x10000>, <0x17840000 0x10000>;
+ reg-names = "drv-0", "drv-1";
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,tcs-offset = <0xd00>;
+ qcom,drv-id = <1>;
+ qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 2>,
+ <WAKE_TCS 2>, <CONTROL_TCS 1>;
+
+ rpmhcc: clock-controller {
+ compatible = "qcom,sdx55-rpmh-clk";
+ #clock-cells = <1>;
+ clock-names = "xo";
+ clocks = <&xo_board>;
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ clock-frequency = <19200000>;
+ };
+};
--
2.25.1
^ permalink raw reply related [flat|nested] 4+ messages in thread