All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lukasz Majewski <lukma@denx.de>
To: Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
	Fabio Estevam <festevam@gmail.com>
Cc: devicetree@vger.kernel.org, Sascha Hauer <s.hauer@pengutronix.de>,
	linux-kernel@vger.kernel.org, NXP Linux Team <linux-imx@nxp.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 3/3] ARM: dts: imx28: Add DTS description of imx28 based XEA board
Date: Wed, 9 Dec 2020 23:11:41 +0100	[thread overview]
Message-ID: <20201209231141.377af967@jawa> (raw)
In-Reply-To: <20201125161815.2361-3-lukma@denx.de>


[-- Attachment #1.1: Type: text/plain, Size: 8192 bytes --]

Dear Community,

> This patch adds DTS definition of the imx278 based XEA board.
> 
> Signed-off-by: Lukasz Majewski <lukma@denx.de>
> ---
>  arch/arm/boot/dts/Makefile       |   3 +-
>  arch/arm/boot/dts/imx28-lwe.dtsi | 185
> +++++++++++++++++++++++++++++++ arch/arm/boot/dts/imx28-xea.dts  |
> 99 +++++++++++++++++ 3 files changed, 286 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/boot/dts/imx28-lwe.dtsi
>  create mode 100644 arch/arm/boot/dts/imx28-xea.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 4572db3fa5ae..c7c95ddc648b 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -702,7 +702,8 @@ dtb-$(CONFIG_ARCH_MXS) += \
>  	imx28-m28evk.dtb \
>  	imx28-sps1.dtb \
>  	imx28-ts4600.dtb \
> -	imx28-tx28.dtb
> +	imx28-tx28.dtb \
> +	imx28-xea.dtb
>  dtb-$(CONFIG_ARCH_NOMADIK) += \
>  	ste-nomadik-s8815.dtb \
>  	ste-nomadik-nhk15.dtb
> diff --git a/arch/arm/boot/dts/imx28-lwe.dtsi
> b/arch/arm/boot/dts/imx28-lwe.dtsi new file mode 100644
> index 000000000000..cb2eb4377d9c
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx28-lwe.dtsi
> @@ -0,0 +1,185 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +/*
> + * Copyright 2020
> + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
> + */
> +
> +/dts-v1/;
> +#include "imx28.dtsi"
> +
> +/ {
> +	compatible = "fsl,imx28";
> +
> +	aliases {
> +		spi2 = &ssp3;
> +	};
> +
> +	chosen {
> +		bootargs = "root=/dev/mmcblk0p2 rootfstype=ext4 ro
> rootwait console=ttyAMA0,115200 panic=1";
> +	};
> +
> +	memory {
> +		reg = <0x40000000 0x08000000>;
> +	};
> +
> +	regulators {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		reg_3v3: regulator@0 {
> +			compatible = "regulator-fixed";
> +			reg = <0>;
> +			regulator-name = "3V3";
> +			regulator-min-microvolt = <3300000>;
> +			regulator-max-microvolt = <3300000>;
> +			regulator-always-on;
> +		};
> +
> +		reg_usb_5v: regulator@1 {
> +			compatible = "regulator-fixed";
> +			reg = <1>;
> +			regulator-name = "usb_vbus";
> +			regulator-min-microvolt = <5000000>;
> +			regulator-max-microvolt = <5000000>;
> +			enable-active-high;
> +		};
> +
> +		reg_fec_3v3: regulator@2 {
> +			compatible = "regulator-fixed";
> +			reg = <2>;
> +			regulator-name = "fec-phy";
> +			regulator-min-microvolt = <3300000>;
> +			regulator-max-microvolt = <3300000>;
> +			enable-active-high;
> +			regulator-boot-on;
> +		};
> +	};
> +};
> +
> +&duart {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&duart_pins_a>;
> +	status = "okay";
> +};
> +
> +&i2c0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c0_pins_a>;
> +	status = "okay";
> +};
> +
> +&saif0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&saif0_pins_a>;
> +	#sound-dai-cells = <0>;
> +	assigned-clocks = <&clks 53>;
> +	assigned-clock-rates = <12000000>;
> +	status = "okay";
> +};
> +
> +&saif1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&saif1_pins_a>;
> +	fsl,saif-master = <&saif0>;
> +	#sound-dai-cells = <0>;
> +	status = "okay";
> +};
> +
> +&spi3_pins_a {
> +	fsl,pinmux-ids = <
> +		MX28_PAD_AUART2_RX__SSP3_D4
> +		MX28_PAD_AUART2_TX__SSP3_D5
> +		MX28_PAD_SSP3_SCK__SSP3_SCK
> +		MX28_PAD_SSP3_MOSI__SSP3_CMD
> +		MX28_PAD_SSP3_MISO__SSP3_D0
> +		MX28_PAD_SSP3_SS0__SSP3_D3
> +		MX28_PAD_AUART2_TX__GPIO_3_9
> +	>;
> +};
> +
> +&ssp3 {
> +	compatible = "fsl,imx28-spi";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&spi3_pins_a>;
> +	status = "okay";
> +
> +	flash0: s25fl256s0@0 {
> +		compatible = "s25fl256s1", "jedec,spi-nor";
> +		spi-max-frequency = <40000000>;
> +		reg = <0>;
> +
> +		partitions {
> +			compatible = "fixed-partitions";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +
> +			partition@0 {
> +				label = "u-boot";
> +				reg = <0 0x80000>;
> +				read-only;
> +			};
> +
> +			partition@80000 {
> +				label = "env0";
> +				reg = <0x80000 0x10000>;
> +			};
> +
> +			partition@90000 {
> +				label = "env1";
> +				reg = <0x90000 0x10000>;
> +			};
> +
> +			partition@100000 {
> +				label = "kernel";
> +				reg = <0x100000 0x400000>;
> +			};
> +
> +			partition@500000 {
> +				label = "swupdate";
> +				reg = <0x500000 0x800000>;
> +			};
> +		};
> +	};
> +};
> +
> +&ssp2 {
> +	compatible = "fsl,imx28-spi";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&spi2_pins_a>;
> +	status = "okay";
> +};
> +
> +&ssp0 {
> +	compatible = "fsl,imx28-mmc";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&mmc0_8bit_pins_a>;
> +	bus-width = <8>;
> +	vmmc-supply = <&reg_3v3>;
> +	non-removable;
> +	status = "okay";
> +};
> +
> +&usb0 {
> +	vbus-supply = <&reg_usb_5v>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&usb0_pins_b>, <&usb0_id_pins_a>;
> +	dr_mode = "host";
> +	status = "okay";
> +};
> +
> +&usbphy0 {
> +	status = "okay";
> +};
> +
> +&usb1 {
> +	vbus-supply = <&reg_usb_5v>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&usb1_pins_b>;
> +	dr_mode = "host";
> +	status = "okay";
> +};
> +
> +&usbphy1 {
> +	status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/imx28-xea.dts
> b/arch/arm/boot/dts/imx28-xea.dts new file mode 100644
> index 000000000000..672080485b78
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx28-xea.dts
> @@ -0,0 +1,99 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +/*
> + * Copyright 2020
> + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
> + */
> +
> +/dts-v1/;
> +#include "imx28-lwe.dtsi"
> +
> +/ {
> +	model = "XEA";
> +};
> +
> +&can0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&can1_pins_a>;
> +	status = "okay";
> +};
> +
> +&i2c1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c1_pins_b>;
> +	status = "okay";
> +};
> +
> +&pinctrl {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&hog_pins_a &hog_pins_tiva>;
> +
> +	hog_pins_a: hog@0 {
> +		reg = <0>;
> +		fsl,pinmux-ids = <
> +			MX28_PAD_GPMI_D00__GPIO_0_0
> +			MX28_PAD_GPMI_D02__GPIO_0_2
> +			MX28_PAD_GPMI_D05__GPIO_0_5
> +			MX28_PAD_GPMI_CE1N__GPIO_0_17
> +			MX28_PAD_GPMI_RDY0__GPIO_0_20
> +			MX28_PAD_GPMI_RDY1__GPIO_0_21
> +			MX28_PAD_GPMI_RDY2__GPIO_0_22
> +			MX28_PAD_GPMI_RDN__GPIO_0_24
> +			MX28_PAD_GPMI_CLE__GPIO_0_27
> +			MX28_PAD_LCD_VSYNC__GPIO_1_28
> +			MX28_PAD_SSP1_SCK__GPIO_2_12
> +			MX28_PAD_SSP1_CMD__GPIO_2_13
> +			MX28_PAD_SSP2_SS1__GPIO_2_20
> +			MX28_PAD_SSP2_SS2__GPIO_2_21
> +			MX28_PAD_LCD_D00__GPIO_1_0
> +			MX28_PAD_LCD_D01__GPIO_1_1
> +			MX28_PAD_LCD_D02__GPIO_1_2
> +			MX28_PAD_LCD_D03__GPIO_1_3
> +			MX28_PAD_LCD_D04__GPIO_1_4
> +			MX28_PAD_LCD_D05__GPIO_1_5
> +			MX28_PAD_LCD_D06__GPIO_1_6
> +		>;
> +		fsl,drive-strength = <MXS_DRIVE_4mA>;
> +		fsl,voltage = <MXS_VOLTAGE_HIGH>;
> +		fsl,pull-up = <MXS_PULL_DISABLE>;
> +	};
> +
> +	hog_pins_tiva: hog@1 {
> +		reg = <1>;
> +		fsl,pinmux-ids = <
> +			MX28_PAD_GPMI_RDY3__GPIO_0_23
> +			MX28_PAD_GPMI_WRN__GPIO_0_25
> +		>;
> +		fsl,voltage = <MXS_VOLTAGE_HIGH>;
> +		fsl,pull-up = <MXS_PULL_DISABLE>;
> +	};
> +
> +	hog_pins_coding: hog@2 {
> +		reg = <2>;
> +		fsl,pinmux-ids = <
> +			MX28_PAD_GPMI_D01__GPIO_0_1
> +			MX28_PAD_GPMI_D03__GPIO_0_3
> +			MX28_PAD_GPMI_D04__GPIO_0_4
> +			MX28_PAD_GPMI_D06__GPIO_0_6
> +			MX28_PAD_GPMI_D07__GPIO_0_7
> +		>;
> +		fsl,voltage = <MXS_VOLTAGE_HIGH>;
> +		fsl,pull-up = <MXS_PULL_DISABLE>;
> +	};
> +};
> +
> +&reg_fec_3v3 {
> +	gpio = <&gpio0 0 0>;
> +};
> +
> +&reg_usb_5v {
> +	gpio = <&gpio0 2 0>;
> +};
> +
> +&spi2_pins_a {
> +	fsl,pinmux-ids = <
> +		MX28_PAD_SSP2_SCK__SSP2_SCK
> +		MX28_PAD_SSP2_MOSI__SSP2_CMD
> +		MX28_PAD_SSP2_MISO__SSP2_D0
> +		MX28_PAD_SSP2_SS0__GPIO_2_19
> +	>;
> +};

Gentle ping on this patch.


Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de

[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Lukasz Majewski <lukma@denx.de>
To: Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
	Fabio Estevam <festevam@gmail.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	NXP Linux Team <linux-imx@nxp.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 3/3] ARM: dts: imx28: Add DTS description of imx28 based XEA board
Date: Wed, 9 Dec 2020 23:11:41 +0100	[thread overview]
Message-ID: <20201209231141.377af967@jawa> (raw)
In-Reply-To: <20201125161815.2361-3-lukma@denx.de>

[-- Attachment #1: Type: text/plain, Size: 8192 bytes --]

Dear Community,

> This patch adds DTS definition of the imx278 based XEA board.
> 
> Signed-off-by: Lukasz Majewski <lukma@denx.de>
> ---
>  arch/arm/boot/dts/Makefile       |   3 +-
>  arch/arm/boot/dts/imx28-lwe.dtsi | 185
> +++++++++++++++++++++++++++++++ arch/arm/boot/dts/imx28-xea.dts  |
> 99 +++++++++++++++++ 3 files changed, 286 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/boot/dts/imx28-lwe.dtsi
>  create mode 100644 arch/arm/boot/dts/imx28-xea.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 4572db3fa5ae..c7c95ddc648b 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -702,7 +702,8 @@ dtb-$(CONFIG_ARCH_MXS) += \
>  	imx28-m28evk.dtb \
>  	imx28-sps1.dtb \
>  	imx28-ts4600.dtb \
> -	imx28-tx28.dtb
> +	imx28-tx28.dtb \
> +	imx28-xea.dtb
>  dtb-$(CONFIG_ARCH_NOMADIK) += \
>  	ste-nomadik-s8815.dtb \
>  	ste-nomadik-nhk15.dtb
> diff --git a/arch/arm/boot/dts/imx28-lwe.dtsi
> b/arch/arm/boot/dts/imx28-lwe.dtsi new file mode 100644
> index 000000000000..cb2eb4377d9c
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx28-lwe.dtsi
> @@ -0,0 +1,185 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +/*
> + * Copyright 2020
> + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
> + */
> +
> +/dts-v1/;
> +#include "imx28.dtsi"
> +
> +/ {
> +	compatible = "fsl,imx28";
> +
> +	aliases {
> +		spi2 = &ssp3;
> +	};
> +
> +	chosen {
> +		bootargs = "root=/dev/mmcblk0p2 rootfstype=ext4 ro
> rootwait console=ttyAMA0,115200 panic=1";
> +	};
> +
> +	memory {
> +		reg = <0x40000000 0x08000000>;
> +	};
> +
> +	regulators {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		reg_3v3: regulator@0 {
> +			compatible = "regulator-fixed";
> +			reg = <0>;
> +			regulator-name = "3V3";
> +			regulator-min-microvolt = <3300000>;
> +			regulator-max-microvolt = <3300000>;
> +			regulator-always-on;
> +		};
> +
> +		reg_usb_5v: regulator@1 {
> +			compatible = "regulator-fixed";
> +			reg = <1>;
> +			regulator-name = "usb_vbus";
> +			regulator-min-microvolt = <5000000>;
> +			regulator-max-microvolt = <5000000>;
> +			enable-active-high;
> +		};
> +
> +		reg_fec_3v3: regulator@2 {
> +			compatible = "regulator-fixed";
> +			reg = <2>;
> +			regulator-name = "fec-phy";
> +			regulator-min-microvolt = <3300000>;
> +			regulator-max-microvolt = <3300000>;
> +			enable-active-high;
> +			regulator-boot-on;
> +		};
> +	};
> +};
> +
> +&duart {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&duart_pins_a>;
> +	status = "okay";
> +};
> +
> +&i2c0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c0_pins_a>;
> +	status = "okay";
> +};
> +
> +&saif0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&saif0_pins_a>;
> +	#sound-dai-cells = <0>;
> +	assigned-clocks = <&clks 53>;
> +	assigned-clock-rates = <12000000>;
> +	status = "okay";
> +};
> +
> +&saif1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&saif1_pins_a>;
> +	fsl,saif-master = <&saif0>;
> +	#sound-dai-cells = <0>;
> +	status = "okay";
> +};
> +
> +&spi3_pins_a {
> +	fsl,pinmux-ids = <
> +		MX28_PAD_AUART2_RX__SSP3_D4
> +		MX28_PAD_AUART2_TX__SSP3_D5
> +		MX28_PAD_SSP3_SCK__SSP3_SCK
> +		MX28_PAD_SSP3_MOSI__SSP3_CMD
> +		MX28_PAD_SSP3_MISO__SSP3_D0
> +		MX28_PAD_SSP3_SS0__SSP3_D3
> +		MX28_PAD_AUART2_TX__GPIO_3_9
> +	>;
> +};
> +
> +&ssp3 {
> +	compatible = "fsl,imx28-spi";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&spi3_pins_a>;
> +	status = "okay";
> +
> +	flash0: s25fl256s0@0 {
> +		compatible = "s25fl256s1", "jedec,spi-nor";
> +		spi-max-frequency = <40000000>;
> +		reg = <0>;
> +
> +		partitions {
> +			compatible = "fixed-partitions";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +
> +			partition@0 {
> +				label = "u-boot";
> +				reg = <0 0x80000>;
> +				read-only;
> +			};
> +
> +			partition@80000 {
> +				label = "env0";
> +				reg = <0x80000 0x10000>;
> +			};
> +
> +			partition@90000 {
> +				label = "env1";
> +				reg = <0x90000 0x10000>;
> +			};
> +
> +			partition@100000 {
> +				label = "kernel";
> +				reg = <0x100000 0x400000>;
> +			};
> +
> +			partition@500000 {
> +				label = "swupdate";
> +				reg = <0x500000 0x800000>;
> +			};
> +		};
> +	};
> +};
> +
> +&ssp2 {
> +	compatible = "fsl,imx28-spi";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&spi2_pins_a>;
> +	status = "okay";
> +};
> +
> +&ssp0 {
> +	compatible = "fsl,imx28-mmc";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&mmc0_8bit_pins_a>;
> +	bus-width = <8>;
> +	vmmc-supply = <&reg_3v3>;
> +	non-removable;
> +	status = "okay";
> +};
> +
> +&usb0 {
> +	vbus-supply = <&reg_usb_5v>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&usb0_pins_b>, <&usb0_id_pins_a>;
> +	dr_mode = "host";
> +	status = "okay";
> +};
> +
> +&usbphy0 {
> +	status = "okay";
> +};
> +
> +&usb1 {
> +	vbus-supply = <&reg_usb_5v>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&usb1_pins_b>;
> +	dr_mode = "host";
> +	status = "okay";
> +};
> +
> +&usbphy1 {
> +	status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/imx28-xea.dts
> b/arch/arm/boot/dts/imx28-xea.dts new file mode 100644
> index 000000000000..672080485b78
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx28-xea.dts
> @@ -0,0 +1,99 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +/*
> + * Copyright 2020
> + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
> + */
> +
> +/dts-v1/;
> +#include "imx28-lwe.dtsi"
> +
> +/ {
> +	model = "XEA";
> +};
> +
> +&can0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&can1_pins_a>;
> +	status = "okay";
> +};
> +
> +&i2c1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c1_pins_b>;
> +	status = "okay";
> +};
> +
> +&pinctrl {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&hog_pins_a &hog_pins_tiva>;
> +
> +	hog_pins_a: hog@0 {
> +		reg = <0>;
> +		fsl,pinmux-ids = <
> +			MX28_PAD_GPMI_D00__GPIO_0_0
> +			MX28_PAD_GPMI_D02__GPIO_0_2
> +			MX28_PAD_GPMI_D05__GPIO_0_5
> +			MX28_PAD_GPMI_CE1N__GPIO_0_17
> +			MX28_PAD_GPMI_RDY0__GPIO_0_20
> +			MX28_PAD_GPMI_RDY1__GPIO_0_21
> +			MX28_PAD_GPMI_RDY2__GPIO_0_22
> +			MX28_PAD_GPMI_RDN__GPIO_0_24
> +			MX28_PAD_GPMI_CLE__GPIO_0_27
> +			MX28_PAD_LCD_VSYNC__GPIO_1_28
> +			MX28_PAD_SSP1_SCK__GPIO_2_12
> +			MX28_PAD_SSP1_CMD__GPIO_2_13
> +			MX28_PAD_SSP2_SS1__GPIO_2_20
> +			MX28_PAD_SSP2_SS2__GPIO_2_21
> +			MX28_PAD_LCD_D00__GPIO_1_0
> +			MX28_PAD_LCD_D01__GPIO_1_1
> +			MX28_PAD_LCD_D02__GPIO_1_2
> +			MX28_PAD_LCD_D03__GPIO_1_3
> +			MX28_PAD_LCD_D04__GPIO_1_4
> +			MX28_PAD_LCD_D05__GPIO_1_5
> +			MX28_PAD_LCD_D06__GPIO_1_6
> +		>;
> +		fsl,drive-strength = <MXS_DRIVE_4mA>;
> +		fsl,voltage = <MXS_VOLTAGE_HIGH>;
> +		fsl,pull-up = <MXS_PULL_DISABLE>;
> +	};
> +
> +	hog_pins_tiva: hog@1 {
> +		reg = <1>;
> +		fsl,pinmux-ids = <
> +			MX28_PAD_GPMI_RDY3__GPIO_0_23
> +			MX28_PAD_GPMI_WRN__GPIO_0_25
> +		>;
> +		fsl,voltage = <MXS_VOLTAGE_HIGH>;
> +		fsl,pull-up = <MXS_PULL_DISABLE>;
> +	};
> +
> +	hog_pins_coding: hog@2 {
> +		reg = <2>;
> +		fsl,pinmux-ids = <
> +			MX28_PAD_GPMI_D01__GPIO_0_1
> +			MX28_PAD_GPMI_D03__GPIO_0_3
> +			MX28_PAD_GPMI_D04__GPIO_0_4
> +			MX28_PAD_GPMI_D06__GPIO_0_6
> +			MX28_PAD_GPMI_D07__GPIO_0_7
> +		>;
> +		fsl,voltage = <MXS_VOLTAGE_HIGH>;
> +		fsl,pull-up = <MXS_PULL_DISABLE>;
> +	};
> +};
> +
> +&reg_fec_3v3 {
> +	gpio = <&gpio0 0 0>;
> +};
> +
> +&reg_usb_5v {
> +	gpio = <&gpio0 2 0>;
> +};
> +
> +&spi2_pins_a {
> +	fsl,pinmux-ids = <
> +		MX28_PAD_SSP2_SCK__SSP2_SCK
> +		MX28_PAD_SSP2_MOSI__SSP2_CMD
> +		MX28_PAD_SSP2_MISO__SSP2_D0
> +		MX28_PAD_SSP2_SS0__GPIO_2_19
> +	>;
> +};

Gentle ping on this patch.


Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

  reply	other threads:[~2020-12-09 22:13 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-25 16:18 [PATCH 1/3] ARM: dts: imx28: Fix label name for L2 switch Lukasz Majewski
2020-11-25 16:18 ` Lukasz Majewski
2020-11-25 16:18 ` [PATCH 2/3] ARM: dts: imx28: add pinmux for USB1 overcurrent on pwm2 Lukasz Majewski
2020-11-25 16:18   ` Lukasz Majewski
2020-12-01  1:43   ` Shawn Guo
2020-12-01  1:43     ` Shawn Guo
2020-11-25 16:18 ` [PATCH 3/3] ARM: dts: imx28: Add DTS description of imx28 based XEA board Lukasz Majewski
2020-11-25 16:18   ` Lukasz Majewski
2020-12-09 22:11   ` Lukasz Majewski [this message]
2020-12-09 22:11     ` Lukasz Majewski
2020-12-22 17:42     ` Lukasz Majewski
2020-12-22 17:42       ` Lukasz Majewski
2020-12-22 17:58   ` Fabio Estevam
2020-12-22 17:58     ` Fabio Estevam
2020-12-01  1:42 ` [PATCH 1/3] ARM: dts: imx28: Fix label name for L2 switch Shawn Guo
2020-12-01  1:42   ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201209231141.377af967@jawa \
    --to=lukma@denx.de \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.