From: Krzysztof Kozlowski <krzk@kernel.org>
To: Teresa Remmet <t.remmet@phytec.de>
Cc: devicetree@vger.kernel.org,
Catalin Marinas <catalin.marinas@arm.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Rob Herring <robh+dt@kernel.org>,
Fabio Estevam <festevam@gmail.com>,
Shawn Guo <shawnguo@kernel.org>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 4/4] arm64: dts: freescale: Add support for phyBOARD-Pollux-i.MX8MP
Date: Thu, 10 Dec 2020 15:46:44 +0100 [thread overview]
Message-ID: <20201210144644.GA55201@kozik-lap> (raw)
In-Reply-To: <1607445491-208271-5-git-send-email-t.remmet@phytec.de>
On Tue, Dec 08, 2020 at 05:38:11PM +0100, Teresa Remmet wrote:
> Add initial support for phyBOARD-Pollux-i.MX8MP.
> Supported basic features:
> * eMMC
> * i2c EEPROM
> * i2c RTC
> * i2c LED
> * PMIC
> * debug UART
> * SD card
> * 1Gbit Ethernet (fec)
> * watchdog
>
> Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
> ---
> arch/arm64/boot/dts/freescale/Makefile | 1 +
> .../dts/freescale/imx8mp-phyboard-pollux-rdk.dts | 166 ++++++++++++
> .../boot/dts/freescale/imx8mp-phycore-som.dtsi | 296 +++++++++++++++++++++
> 3 files changed, 463 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
> create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
>
With the fixes pointed out by Alexander:
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Teresa Remmet <t.remmet@phytec.de>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Catalin Marinas <catalin.marinas@arm.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
Fabio Estevam <festevam@gmail.com>
Subject: Re: [PATCH v2 4/4] arm64: dts: freescale: Add support for phyBOARD-Pollux-i.MX8MP
Date: Thu, 10 Dec 2020 15:46:44 +0100 [thread overview]
Message-ID: <20201210144644.GA55201@kozik-lap> (raw)
In-Reply-To: <1607445491-208271-5-git-send-email-t.remmet@phytec.de>
On Tue, Dec 08, 2020 at 05:38:11PM +0100, Teresa Remmet wrote:
> Add initial support for phyBOARD-Pollux-i.MX8MP.
> Supported basic features:
> * eMMC
> * i2c EEPROM
> * i2c RTC
> * i2c LED
> * PMIC
> * debug UART
> * SD card
> * 1Gbit Ethernet (fec)
> * watchdog
>
> Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
> ---
> arch/arm64/boot/dts/freescale/Makefile | 1 +
> .../dts/freescale/imx8mp-phyboard-pollux-rdk.dts | 166 ++++++++++++
> .../boot/dts/freescale/imx8mp-phycore-som.dtsi | 296 +++++++++++++++++++++
> 3 files changed, 463 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
> create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
>
With the fixes pointed out by Alexander:
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Best regards,
Krzysztof
next prev parent reply other threads:[~2020-12-10 14:48 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-08 16:38 [PATCH v2 0/4] Initial support for phyBOARD-Pollux i.MX8MP Teresa Remmet
2020-12-08 16:38 ` Teresa Remmet
2020-12-08 16:38 ` [PATCH v2 1/4] arm64: defconfig: Enable rv3028 i2c rtc driver Teresa Remmet
2020-12-08 16:38 ` Teresa Remmet
2020-12-10 14:35 ` Krzysztof Kozlowski
2020-12-10 14:35 ` Krzysztof Kozlowski
2020-12-08 16:38 ` [PATCH v2 2/4] arm64: defconfig: Enable PCA9532 support Teresa Remmet
2020-12-08 16:38 ` Teresa Remmet
2020-12-08 16:38 ` [PATCH v2 3/4] bindings: arm: fsl: Add PHYTEC i.MX8MP devicetree bindings Teresa Remmet
2020-12-08 16:38 ` Teresa Remmet
2020-12-10 14:36 ` Krzysztof Kozlowski
2020-12-10 14:36 ` Krzysztof Kozlowski
2020-12-10 15:18 ` Rob Herring
2020-12-10 15:18 ` Rob Herring
2020-12-08 16:38 ` [PATCH v2 4/4] arm64: dts: freescale: Add support for phyBOARD-Pollux-i.MX8MP Teresa Remmet
2020-12-08 16:38 ` Teresa Remmet
2020-12-09 15:01 ` Alexander Dahl
2020-12-09 15:01 ` Alexander Dahl
2020-12-10 20:17 ` Teresa Remmet
2020-12-10 20:17 ` Teresa Remmet
2020-12-10 14:46 ` Krzysztof Kozlowski [this message]
2020-12-10 14:46 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201210144644.GA55201@kozik-lap \
--to=krzk@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=t.remmet@phytec.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.