Re: [PATCH v8, 1/6] dt-bindings: mediatek: add rdma_fifo_size description for mt8183 display

[Rob Herring <robh@kernel.org>]

On Thu, Dec 10, 2020 at 05:07:37PM +0800, Yongqiang Niu wrote:
> rdma fifo size may be different even in same SOC, add this
> property to the corresponding rdma
> 
> Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
> ---
>  .../bindings/display/mediatek/mediatek,disp.txt          | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
> index 1212207..64c64ee 100644
> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
> @@ -66,6 +66,13 @@ Required properties (DMA function blocks):
>    argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
>    for details.
>  
> +Optional properties (RDMA function blocks):
> +- mediatek,rdma_fifo_size: rdma fifo size may be different even in same SOC, add this

mediatek,rdma-fifo-size

> +  property to the corresponding rdma
> +  the value is the Max value which defined in hardware data sheet.
> +  rdma_fifo_size of rdma0 in mt8183 is 5120
> +  rdma_fifo_size of rdma1 in mt8183 is 2048
> +
>  Examples:
>  
>  mmsys: clock-controller@14000000 {
> @@ -207,3 +214,12 @@ od@14023000 {
>  	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
>  	clocks = <&mmsys CLK_MM_DISP_OD>;
>  };
> +
> +rdma1: rdma@1400c000 {
> +	compatible = "mediatek,mt8183-disp-rdma";
> +	reg = <0 0x1400c000 0 0x1000>;
> +	interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
> +	power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> +	clocks = <&mmsys CLK_MM_DISP_RDMA1>;
> +	mediatek,rdma_fifo_size = <2048>;
> +};
> -- 
> 1.8.1.1.dirty
> 

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek