From: "Pali Rohár" <pali@kernel.org>
To: "Russell King" <linux@armlinux.org.uk>,
"Andrew Lunn" <andrew@lunn.ch>,
"Heiner Kallweit" <hkallweit1@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
"Jakub Kicinski" <kuba@kernel.org>,
"Marek Behún" <kabel@kernel.org>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 2/4] net: sfp: allow to use also SFP modules which are detected as SFF
Date: Wed, 30 Dec 2020 16:47:53 +0100 [thread overview]
Message-ID: <20201230154755.14746-3-pali@kernel.org> (raw)
In-Reply-To: <20201230154755.14746-1-pali@kernel.org>
Some GPON SFP modules (e.g. Ubiquiti U-Fiber Instant) have set SFF phys_id
in their EEPROM. Kernel SFP subsystem currently does not allow to use
modules detected as SFF.
This change extends check for SFP modules so also those with SFF phys_id
are allowed. With this change also GPON SFP module Ubiquiti U-Fiber Instant
is recognized.
Signed-off-by: Pali Rohár <pali@kernel.org>
---
drivers/net/phy/sfp.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index 490e78a72dd6..73f3ecf15260 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -273,7 +273,8 @@ static const struct sff_data sff_data = {
static bool sfp_module_supported(const struct sfp_eeprom_id *id)
{
- return id->base.phys_id == SFF8024_ID_SFP &&
+ return (id->base.phys_id == SFF8024_ID_SFP ||
+ id->base.phys_id == SFF8024_ID_SFF_8472) &&
id->base.phys_ext_id == SFP_PHYS_EXT_ID_SFP;
}
--
2.20.1
next prev parent reply other threads:[~2020-12-30 15:49 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-30 15:47 [PATCH 0/4] net: sfp: add support for GPON RTL8672/RTL9601C and Ubiquiti U-Fiber Pali Rohár
2020-12-30 15:47 ` [PATCH 1/4] net: sfp: add workaround for Realtek RTL8672 and RTL9601C chips Pali Rohár
2020-12-30 16:10 ` Russell King - ARM Linux admin
2020-12-30 16:56 ` Pali Rohár
2020-12-30 17:05 ` Russell King - ARM Linux admin
2020-12-30 17:13 ` Andrew Lunn
2020-12-30 17:43 ` Pali Rohár
2020-12-30 19:09 ` Russell King - ARM Linux admin
2020-12-30 19:49 ` Andrew Lunn
2020-12-31 12:14 ` Pali Rohár
2020-12-31 15:09 ` Andrew Lunn
2020-12-31 15:40 ` Pali Rohár
2020-12-31 15:30 ` Andrew Lunn
2020-12-31 17:00 ` Pali Rohár
2020-12-31 17:13 ` Andrew Lunn
2021-01-02 1:49 ` Pali Rohár
2021-01-03 2:25 ` Thomas Schreiber
2021-01-03 2:41 ` Pali Rohár
2021-01-06 14:55 ` Pali Rohár
2021-01-06 15:21 ` Russell King - ARM Linux admin
2021-01-06 15:23 ` Russell King - ARM Linux admin
2021-01-06 15:27 ` Russell King - ARM Linux admin
2021-01-06 15:35 ` Pali Rohár
2020-12-30 19:30 ` Andrew Lunn
2020-12-30 19:39 ` Russell King - ARM Linux admin
2020-12-30 17:31 ` Pali Rohár
2020-12-30 19:18 ` Russell King - ARM Linux admin
2020-12-30 15:47 ` Pali Rohár [this message]
2020-12-30 16:11 ` [PATCH 2/4] net: sfp: allow to use also SFP modules which are detected as SFF Russell King - ARM Linux admin
2020-12-30 17:06 ` Pali Rohár
2020-12-30 17:27 ` Marek Behún
2020-12-30 19:12 ` Russell King - ARM Linux admin
2020-12-31 13:52 ` Pali Rohár
2020-12-30 15:47 ` [PATCH 3/4] net: sfp: assume that LOS is not implemented if both LOS normal and inverted is set Pali Rohár
2020-12-30 16:13 ` Russell King - ARM Linux admin
2020-12-30 16:57 ` Pali Rohár
2020-12-30 17:06 ` Russell King - ARM Linux admin
2020-12-30 17:17 ` Andrew Lunn
2020-12-30 17:32 ` Pali Rohár
2020-12-30 15:47 ` [PATCH 4/4] net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant Pali Rohár
2021-01-06 15:37 ` [PATCH v2 0/3] net: sfp: add support for GPON RTL8672/RTL9601C and Ubiquiti U-Fiber Pali Rohár
2021-01-06 15:37 ` [PATCH v2 1/3] net: sfp: add workaround for Realtek RTL8672 and RTL9601C chips Pali Rohár
2021-01-07 2:02 ` Andrew Lunn
2021-01-07 9:08 ` Pali Rohár
2021-01-07 17:19 ` Andrew Lunn
2021-01-07 17:40 ` Russell King - ARM Linux admin
2021-01-07 19:18 ` Pali Rohár
2021-01-07 19:17 ` Pali Rohár
2021-01-07 19:45 ` Russell King - ARM Linux admin
2021-01-07 20:21 ` Marek Behún
2021-01-08 0:49 ` Pali Rohár
2021-01-06 15:37 ` [PATCH v2 2/3] net: sfp: assume that LOS is not implemented if both LOS normal and inverted is set Pali Rohár
2021-01-07 16:54 ` Andrew Lunn
2021-01-09 15:46 ` Russell King - ARM Linux admin
2021-01-09 15:54 ` Andrew Lunn
2021-01-09 16:27 ` Russell King - ARM Linux admin
2021-01-09 19:14 ` Pali Rohár
2021-01-09 23:19 ` Russell King - ARM Linux admin
2021-01-09 23:50 ` Pali Rohár
2021-01-06 15:37 ` [PATCH v2 3/3] net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant Pali Rohár
2021-01-07 16:51 ` Andrew Lunn
2021-01-11 11:39 ` [PATCH v3 0/2] net: sfp: add support for GPON RTL8672/RTL9601C and Ubiquiti U-Fiber Pali Rohár
2021-01-11 11:39 ` [PATCH v3 1/2] net: sfp: add workaround for Realtek RTL8672 and RTL9601C chips Pali Rohár
2021-01-11 15:28 ` Marek Behún
2021-01-11 11:39 ` [PATCH v3 2/2] net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant Pali Rohár
2021-01-11 15:32 ` Marek Behún
2021-01-12 13:33 ` [PATCH v3 0/2] net: sfp: add support for GPON RTL8672/RTL9601C and Ubiquiti U-Fiber Pali Rohár
2021-01-18 9:34 ` Pali Rohár
2021-01-25 14:09 ` Pali Rohár
2021-01-25 14:16 ` Russell King - ARM Linux admin
2021-01-25 14:23 ` Pali Rohár
2021-01-25 14:42 ` Russell King - ARM Linux admin
2021-01-25 14:47 ` Pali Rohár
2021-01-25 15:41 ` Andrew Lunn
2021-01-25 15:02 ` [PATCH v4 " Pali Rohár
2021-01-25 15:02 ` [PATCH v4 1/2] net: sfp: add workaround for Realtek RTL8672 and RTL9601C chips Pali Rohár
2021-01-25 15:02 ` [PATCH v4 2/2] net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant Pali Rohár
2021-01-28 21:50 ` [PATCH v4 0/2] net: sfp: add support for GPON RTL8672/RTL9601C and Ubiquiti U-Fiber patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201230154755.14746-3-pali@kernel.org \
--to=pali@kernel.org \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=hkallweit1@gmail.com \
--cc=kabel@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.