From: "Pali Rohár" <pali@kernel.org>
To: Russell King - ARM Linux admin <linux@armlinux.org.uk>,
Andrew Lunn <andrew@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>
Cc: "Thomas Schreiber" <tschreibe@gmail.com>,
"Heiner Kallweit" <hkallweit1@gmail.com>,
"Marek Behún" <kabel@kernel.org>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 0/2] net: sfp: add support for GPON RTL8672/RTL9601C and Ubiquiti U-Fiber
Date: Mon, 11 Jan 2021 12:39:07 +0100 [thread overview]
Message-ID: <20210111113909.31702-1-pali@kernel.org> (raw)
In-Reply-To: <20201230154755.14746-1-pali@kernel.org>
This is a third version of patches which add workarounds for
RTL8672/RTL9601C EEPROMs and Ubiquiti U-Fiber Instant SFP.
Russel's PATCH v2 2/3 was dropped from this patch series as
it is being handled separately.
Pali Rohár (2):
net: sfp: add workaround for Realtek RTL8672 and RTL9601C chips
net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant
drivers/net/phy/sfp-bus.c | 15 +++++
drivers/net/phy/sfp.c | 117 ++++++++++++++++++++++++++------------
2 files changed, 97 insertions(+), 35 deletions(-)
--
2.20.1
next prev parent reply other threads:[~2021-01-11 11:40 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-30 15:47 [PATCH 0/4] net: sfp: add support for GPON RTL8672/RTL9601C and Ubiquiti U-Fiber Pali Rohár
2020-12-30 15:47 ` [PATCH 1/4] net: sfp: add workaround for Realtek RTL8672 and RTL9601C chips Pali Rohár
2020-12-30 16:10 ` Russell King - ARM Linux admin
2020-12-30 16:56 ` Pali Rohár
2020-12-30 17:05 ` Russell King - ARM Linux admin
2020-12-30 17:13 ` Andrew Lunn
2020-12-30 17:43 ` Pali Rohár
2020-12-30 19:09 ` Russell King - ARM Linux admin
2020-12-30 19:49 ` Andrew Lunn
2020-12-31 12:14 ` Pali Rohár
2020-12-31 15:09 ` Andrew Lunn
2020-12-31 15:40 ` Pali Rohár
2020-12-31 15:30 ` Andrew Lunn
2020-12-31 17:00 ` Pali Rohár
2020-12-31 17:13 ` Andrew Lunn
2021-01-02 1:49 ` Pali Rohár
2021-01-03 2:25 ` Thomas Schreiber
2021-01-03 2:41 ` Pali Rohár
2021-01-06 14:55 ` Pali Rohár
2021-01-06 15:21 ` Russell King - ARM Linux admin
2021-01-06 15:23 ` Russell King - ARM Linux admin
2021-01-06 15:27 ` Russell King - ARM Linux admin
2021-01-06 15:35 ` Pali Rohár
2020-12-30 19:30 ` Andrew Lunn
2020-12-30 19:39 ` Russell King - ARM Linux admin
2020-12-30 17:31 ` Pali Rohár
2020-12-30 19:18 ` Russell King - ARM Linux admin
2020-12-30 15:47 ` [PATCH 2/4] net: sfp: allow to use also SFP modules which are detected as SFF Pali Rohár
2020-12-30 16:11 ` Russell King - ARM Linux admin
2020-12-30 17:06 ` Pali Rohár
2020-12-30 17:27 ` Marek Behún
2020-12-30 19:12 ` Russell King - ARM Linux admin
2020-12-31 13:52 ` Pali Rohár
2020-12-30 15:47 ` [PATCH 3/4] net: sfp: assume that LOS is not implemented if both LOS normal and inverted is set Pali Rohár
2020-12-30 16:13 ` Russell King - ARM Linux admin
2020-12-30 16:57 ` Pali Rohár
2020-12-30 17:06 ` Russell King - ARM Linux admin
2020-12-30 17:17 ` Andrew Lunn
2020-12-30 17:32 ` Pali Rohár
2020-12-30 15:47 ` [PATCH 4/4] net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant Pali Rohár
2021-01-06 15:37 ` [PATCH v2 0/3] net: sfp: add support for GPON RTL8672/RTL9601C and Ubiquiti U-Fiber Pali Rohár
2021-01-06 15:37 ` [PATCH v2 1/3] net: sfp: add workaround for Realtek RTL8672 and RTL9601C chips Pali Rohár
2021-01-07 2:02 ` Andrew Lunn
2021-01-07 9:08 ` Pali Rohár
2021-01-07 17:19 ` Andrew Lunn
2021-01-07 17:40 ` Russell King - ARM Linux admin
2021-01-07 19:18 ` Pali Rohár
2021-01-07 19:17 ` Pali Rohár
2021-01-07 19:45 ` Russell King - ARM Linux admin
2021-01-07 20:21 ` Marek Behún
2021-01-08 0:49 ` Pali Rohár
2021-01-06 15:37 ` [PATCH v2 2/3] net: sfp: assume that LOS is not implemented if both LOS normal and inverted is set Pali Rohár
2021-01-07 16:54 ` Andrew Lunn
2021-01-09 15:46 ` Russell King - ARM Linux admin
2021-01-09 15:54 ` Andrew Lunn
2021-01-09 16:27 ` Russell King - ARM Linux admin
2021-01-09 19:14 ` Pali Rohár
2021-01-09 23:19 ` Russell King - ARM Linux admin
2021-01-09 23:50 ` Pali Rohár
2021-01-06 15:37 ` [PATCH v2 3/3] net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant Pali Rohár
2021-01-07 16:51 ` Andrew Lunn
2021-01-11 11:39 ` Pali Rohár [this message]
2021-01-11 11:39 ` [PATCH v3 1/2] net: sfp: add workaround for Realtek RTL8672 and RTL9601C chips Pali Rohár
2021-01-11 15:28 ` Marek Behún
2021-01-11 11:39 ` [PATCH v3 2/2] net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant Pali Rohár
2021-01-11 15:32 ` Marek Behún
2021-01-12 13:33 ` [PATCH v3 0/2] net: sfp: add support for GPON RTL8672/RTL9601C and Ubiquiti U-Fiber Pali Rohár
2021-01-18 9:34 ` Pali Rohár
2021-01-25 14:09 ` Pali Rohár
2021-01-25 14:16 ` Russell King - ARM Linux admin
2021-01-25 14:23 ` Pali Rohár
2021-01-25 14:42 ` Russell King - ARM Linux admin
2021-01-25 14:47 ` Pali Rohár
2021-01-25 15:41 ` Andrew Lunn
2021-01-25 15:02 ` [PATCH v4 " Pali Rohár
2021-01-25 15:02 ` [PATCH v4 1/2] net: sfp: add workaround for Realtek RTL8672 and RTL9601C chips Pali Rohár
2021-01-25 15:02 ` [PATCH v4 2/2] net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant Pali Rohár
2021-01-28 21:50 ` [PATCH v4 0/2] net: sfp: add support for GPON RTL8672/RTL9601C and Ubiquiti U-Fiber patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210111113909.31702-1-pali@kernel.org \
--to=pali@kernel.org \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=hkallweit1@gmail.com \
--cc=kabel@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=tschreibe@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.