[PATCH 1/2] habanalabs: report correct dram size in info ioctl

All of lore.kernel.org
 help / color / mirror / Atom feed

* [PATCH 1/2] habanalabs: report correct dram size in info ioctl
@ 2021-01-01 13:16 Oded Gabbay
  2021-01-01 13:16 ` [PATCH 2/2] habanalabs: read device boot errors after cpucp is up Oded Gabbay
  0 siblings, 1 reply; 2+ messages in thread
From: Oded Gabbay @ 2021-01-01 13:16 UTC (permalink / raw)
  To: linux-kernel; +Cc: Ofir Bitton

From: Ofir Bitton <obitton@habana.ai>

In case MMU is enabled, we must take MMU page size into
consideration when reporting dram size to the user.
This is because the MMU page size can be a value which is NOT
a power-of-2 value. As a result, the total DRAM size (which is always
a power-of-2 value) needed to be rounded-down.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
---
 drivers/misc/habanalabs/common/habanalabs_ioctl.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/misc/habanalabs/common/habanalabs_ioctl.c b/drivers/misc/habanalabs/common/habanalabs_ioctl.c
index 64a82c966836..b83ee32ae569 100644
--- a/drivers/misc/habanalabs/common/habanalabs_ioctl.c
+++ b/drivers/misc/habanalabs/common/habanalabs_ioctl.c
@@ -62,7 +62,13 @@ static int hw_ip_info(struct hl_device *hdev, struct hl_info_args *args)
 			prop->dmmu.start_addr : prop->dram_user_base_address;
 	hw_ip.tpc_enabled_mask = prop->tpc_enabled_mask;
 	hw_ip.sram_size = prop->sram_size - sram_kmd_size;
-	hw_ip.dram_size = prop->dram_size - dram_kmd_size;
+
+	if (hdev->mmu_enable)
+		hw_ip.dram_size = rounddown(prop->dram_size - dram_kmd_size,
+							prop->dram_page_size);
+	else
+		hw_ip.dram_size = prop->dram_size - dram_kmd_size;
+
 	if (hw_ip.dram_size > PAGE_SIZE)
 		hw_ip.dram_enabled = 1;
 	hw_ip.dram_page_size = prop->dram_page_size;
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 2+ messages in thread

* [PATCH 2/2] habanalabs: read device boot errors after cpucp is up
  2021-01-01 13:16 [PATCH 1/2] habanalabs: report correct dram size in info ioctl Oded Gabbay
@ 2021-01-01 13:16 ` Oded Gabbay
  0 siblings, 0 replies; 2+ messages in thread
From: Oded Gabbay @ 2021-01-01 13:16 UTC (permalink / raw)
  To: linux-kernel; +Cc: Ofir Bitton

From: Ofir Bitton <obitton@habana.ai>

Boot cpu can report errors in various boot stages.
Current implementaion does not take into consideration errors
reported in late stages, hence we will check for errors at the most
late stage when fetching cpucp information.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
---
 drivers/misc/habanalabs/common/firmware_if.c  | 126 ++++++++++--------
 drivers/misc/habanalabs/common/habanalabs.h   |   3 +-
 drivers/misc/habanalabs/gaudi/gaudi.c         |   2 +-
 drivers/misc/habanalabs/goya/goya.c           |   2 +-
 .../habanalabs/include/common/hl_boot_if.h    |   3 +
 5 files changed, 80 insertions(+), 56 deletions(-)

diff --git a/drivers/misc/habanalabs/common/firmware_if.c b/drivers/misc/habanalabs/common/firmware_if.c
index 94dda314233b..a6ea5bbeb699 100644
--- a/drivers/misc/habanalabs/common/firmware_if.c
+++ b/drivers/misc/habanalabs/common/firmware_if.c
@@ -279,8 +279,68 @@ int hl_fw_send_heartbeat(struct hl_device *hdev)
 	return rc;
 }
 
+static int fw_read_errors(struct hl_device *hdev, u32 boot_err0_reg,
+		u32 cpu_security_boot_status_reg)
+{
+	u32 err_val, security_val;
+
+	/* Some of the firmware status codes are deprecated in newer f/w
+	 * versions. In those versions, the errors are reported
+	 * in different registers. Therefore, we need to check those
+	 * registers and print the exact errors. Moreover, there
+	 * may be multiple errors, so we need to report on each error
+	 * separately. Some of the error codes might indicate a state
+	 * that is not an error per-se, but it is an error in production
+	 * environment
+	 */
+	err_val = RREG32(boot_err0_reg);
+	if (!(err_val & CPU_BOOT_ERR0_ENABLED))
+		return 0;
+
+	if (err_val & CPU_BOOT_ERR0_DRAM_INIT_FAIL)
+		dev_err(hdev->dev,
+			"Device boot error - DRAM initialization failed\n");
+	if (err_val & CPU_BOOT_ERR0_FIT_CORRUPTED)
+		dev_err(hdev->dev, "Device boot error - FIT image corrupted\n");
+	if (err_val & CPU_BOOT_ERR0_TS_INIT_FAIL)
+		dev_err(hdev->dev,
+			"Device boot error - Thermal Sensor initialization failed\n");
+	if (err_val & CPU_BOOT_ERR0_DRAM_SKIPPED)
+		dev_warn(hdev->dev,
+			"Device boot warning - Skipped DRAM initialization\n");
+	if (err_val & CPU_BOOT_ERR0_BMC_WAIT_SKIPPED)
+		dev_warn(hdev->dev,
+			"Device boot error - Skipped waiting for BMC\n");
+	if (err_val & CPU_BOOT_ERR0_NIC_DATA_NOT_RDY)
+		dev_err(hdev->dev,
+			"Device boot error - Serdes data from BMC not available\n");
+	if (err_val & CPU_BOOT_ERR0_NIC_FW_FAIL)
+		dev_err(hdev->dev,
+			"Device boot error - NIC F/W initialization failed\n");
+	if (err_val & CPU_BOOT_ERR0_SECURITY_NOT_RDY)
+		dev_warn(hdev->dev,
+			"Device boot warning - security not ready\n");
+	if (err_val & CPU_BOOT_ERR0_SECURITY_FAIL)
+		dev_err(hdev->dev, "Device boot error - security failure\n");
+	if (err_val & CPU_BOOT_ERR0_EFUSE_FAIL)
+		dev_err(hdev->dev, "Device boot error - eFuse failure\n");
+	if (err_val & CPU_BOOT_ERR0_PLL_FAIL)
+		dev_err(hdev->dev, "Device boot error - PLL failure\n");
+
+	security_val = RREG32(cpu_security_boot_status_reg);
+	if (security_val & CPU_BOOT_DEV_STS0_ENABLED)
+		dev_dbg(hdev->dev, "Device security status %#x\n",
+				security_val);
+
+	if (err_val & ~CPU_BOOT_ERR0_ENABLED)
+		return -EIO;
+
+	return 0;
+}
+
 int hl_fw_cpucp_info_get(struct hl_device *hdev,
-			u32 cpu_security_boot_status_reg)
+			u32 cpu_security_boot_status_reg,
+			u32 boot_err0_reg)
 {
 	struct asic_fixed_properties *prop = &hdev->asic_prop;
 	struct cpucp_packet pkt = {};
@@ -314,6 +374,12 @@ int hl_fw_cpucp_info_get(struct hl_device *hdev,
 		goto out;
 	}
 
+	rc = fw_read_errors(hdev, boot_err0_reg, cpu_security_boot_status_reg);
+	if (rc) {
+		dev_err(hdev->dev, "Errors in device boot\n");
+		goto out;
+	}
+
 	memcpy(&prop->cpucp_info, cpucp_info_cpu_addr,
 			sizeof(prop->cpucp_info));
 
@@ -478,58 +544,6 @@ int hl_fw_cpucp_pll_info_get(struct hl_device *hdev, u16 pll_index,
 	return rc;
 }
 
-static void fw_read_errors(struct hl_device *hdev, u32 boot_err0_reg,
-		u32 cpu_security_boot_status_reg)
-{
-	u32 err_val, security_val;
-
-	/* Some of the firmware status codes are deprecated in newer f/w
-	 * versions. In those versions, the errors are reported
-	 * in different registers. Therefore, we need to check those
-	 * registers and print the exact errors. Moreover, there
-	 * may be multiple errors, so we need to report on each error
-	 * separately. Some of the error codes might indicate a state
-	 * that is not an error per-se, but it is an error in production
-	 * environment
-	 */
-	err_val = RREG32(boot_err0_reg);
-	if (!(err_val & CPU_BOOT_ERR0_ENABLED))
-		return;
-
-	if (err_val & CPU_BOOT_ERR0_DRAM_INIT_FAIL)
-		dev_err(hdev->dev,
-			"Device boot error - DRAM initialization failed\n");
-	if (err_val & CPU_BOOT_ERR0_FIT_CORRUPTED)
-		dev_err(hdev->dev, "Device boot error - FIT image corrupted\n");
-	if (err_val & CPU_BOOT_ERR0_TS_INIT_FAIL)
-		dev_err(hdev->dev,
-			"Device boot error - Thermal Sensor initialization failed\n");
-	if (err_val & CPU_BOOT_ERR0_DRAM_SKIPPED)
-		dev_warn(hdev->dev,
-			"Device boot warning - Skipped DRAM initialization\n");
-	if (err_val & CPU_BOOT_ERR0_BMC_WAIT_SKIPPED)
-		dev_warn(hdev->dev,
-			"Device boot error - Skipped waiting for BMC\n");
-	if (err_val & CPU_BOOT_ERR0_NIC_DATA_NOT_RDY)
-		dev_err(hdev->dev,
-			"Device boot error - Serdes data from BMC not available\n");
-	if (err_val & CPU_BOOT_ERR0_NIC_FW_FAIL)
-		dev_err(hdev->dev,
-			"Device boot error - NIC F/W initialization failed\n");
-	if (err_val & CPU_BOOT_ERR0_SECURITY_NOT_RDY)
-		dev_warn(hdev->dev,
-			"Device boot warning - security not ready\n");
-	if (err_val & CPU_BOOT_ERR0_SECURITY_FAIL)
-		dev_err(hdev->dev, "Device boot error - security failure\n");
-	if (err_val & CPU_BOOT_ERR0_EFUSE_FAIL)
-		dev_err(hdev->dev, "Device boot error - eFuse failure\n");
-
-	security_val = RREG32(cpu_security_boot_status_reg);
-	if (security_val & CPU_BOOT_DEV_STS0_ENABLED)
-		dev_dbg(hdev->dev, "Device security status %#x\n",
-				security_val);
-}
-
 static void detect_cpu_boot_status(struct hl_device *hdev, u32 status)
 {
 	/* Some of the status codes below are deprecated in newer f/w
@@ -828,6 +842,10 @@ int hl_fw_init_cpu(struct hl_device *hdev, u32 cpu_boot_status_reg,
 		goto out;
 	}
 
+	rc = fw_read_errors(hdev, boot_err0_reg, cpu_security_boot_status_reg);
+	if (rc)
+		return rc;
+
 	/* Clear reset status since we need to read again from app */
 	prop->hard_reset_done_by_fw = false;
 
@@ -850,6 +868,8 @@ int hl_fw_init_cpu(struct hl_device *hdev, u32 cpu_boot_status_reg,
 
 	dev_info(hdev->dev, "Successfully loaded firmware to device\n");
 
+	return 0;
+
 out:
 	fw_read_errors(hdev, boot_err0_reg, cpu_security_boot_status_reg);
 
diff --git a/drivers/misc/habanalabs/common/habanalabs.h b/drivers/misc/habanalabs/common/habanalabs.h
index 554633cc9474..537545df531a 100644
--- a/drivers/misc/habanalabs/common/habanalabs.h
+++ b/drivers/misc/habanalabs/common/habanalabs.h
@@ -2208,7 +2208,8 @@ void hl_fw_cpu_accessible_dma_pool_free(struct hl_device *hdev, size_t size,
 					void *vaddr);
 int hl_fw_send_heartbeat(struct hl_device *hdev);
 int hl_fw_cpucp_info_get(struct hl_device *hdev,
-			u32 cpu_security_boot_status_reg);
+			u32 cpu_security_boot_status_reg,
+			u32 boot_err0_reg);
 int hl_fw_get_eeprom_data(struct hl_device *hdev, void *data, size_t max_size);
 int hl_fw_cpucp_pci_counters_get(struct hl_device *hdev,
 		struct hl_info_pci_counters *counters);
diff --git a/drivers/misc/habanalabs/gaudi/gaudi.c b/drivers/misc/habanalabs/gaudi/gaudi.c
index 44f470e11f78..f9a99872a56e 100644
--- a/drivers/misc/habanalabs/gaudi/gaudi.c
+++ b/drivers/misc/habanalabs/gaudi/gaudi.c
@@ -7450,7 +7450,7 @@ static int gaudi_cpucp_info_get(struct hl_device *hdev)
 	if (!(gaudi->hw_cap_initialized & HW_CAP_CPU_Q))
 		return 0;
 
-	rc = hl_fw_cpucp_info_get(hdev, mmCPU_BOOT_DEV_STS0);
+	rc = hl_fw_cpucp_info_get(hdev, mmCPU_BOOT_DEV_STS0, mmCPU_BOOT_ERR0);
 	if (rc)
 		return rc;
 
diff --git a/drivers/misc/habanalabs/goya/goya.c b/drivers/misc/habanalabs/goya/goya.c
index 748b57036080..86da0401b6ea 100644
--- a/drivers/misc/habanalabs/goya/goya.c
+++ b/drivers/misc/habanalabs/goya/goya.c
@@ -5149,7 +5149,7 @@ int goya_cpucp_info_get(struct hl_device *hdev)
 	if (!(goya->hw_cap_initialized & HW_CAP_CPU_Q))
 		return 0;
 
-	rc = hl_fw_cpucp_info_get(hdev, mmCPU_BOOT_DEV_STS0);
+	rc = hl_fw_cpucp_info_get(hdev, mmCPU_BOOT_DEV_STS0, mmCPU_BOOT_ERR0);
 	if (rc)
 		return rc;
 
diff --git a/drivers/misc/habanalabs/include/common/hl_boot_if.h b/drivers/misc/habanalabs/include/common/hl_boot_if.h
index 93552d6b59b3..e29c77bdea07 100644
--- a/drivers/misc/habanalabs/include/common/hl_boot_if.h
+++ b/drivers/misc/habanalabs/include/common/hl_boot_if.h
@@ -69,6 +69,8 @@
  *					image has failed to match expected
  *					checksum. Trying to program image again
  *					might solve this.
+ * CPU_BOOT_ERR0_PLL_FAIL		PLL settings failed, meaning that one
+ *					of the PLLs remained in REF_CLK
  *
  * CPU_BOOT_ERR0_ENABLED		Error registers enabled.
  *					This is a main indication that the
@@ -88,6 +90,7 @@
 #define CPU_BOOT_ERR0_EFUSE_FAIL		(1 << 9)
 #define CPU_BOOT_ERR0_PRI_IMG_VER_FAIL		(1 << 10)
 #define CPU_BOOT_ERR0_SEC_IMG_VER_FAIL		(1 << 11)
+#define CPU_BOOT_ERR0_PLL_FAIL			(1 << 12)
 #define CPU_BOOT_ERR0_ENABLED			(1 << 31)
 
 /*
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2021-01-01 13:17 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2021-01-01 13:16 [PATCH 1/2] habanalabs: report correct dram size in info ioctl Oded Gabbay
2021-01-01 13:16 ` [PATCH 2/2] habanalabs: read device boot errors after cpucp is up Oded Gabbay

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.