[PATCH 4.4 00/19] 4.4.250-rc1 review

[PATCH 4.4 00/19] 4.4.250-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.4.250 release.
There are 19 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sat, 09 Jan 2021 14:08:13 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.250-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.4.250-rc1

Jonathan Cameron <Jonathan.Cameron@huawei.com>
    iio:magnetometer:mag3110: Fix alignment and data leak issues.

Jessica Yu <jeyu@kernel.org>
    module: delay kobject uevent until after module init call

Qinglang Miao <miaoqinglang@huawei.com>
    powerpc: sysdev: add missing iounmap() on error in mpic_msgr_probe()

Jan Kara <jack@suse.cz>
    quota: Don't overflow quota file offsets

Miroslav Benes <mbenes@suse.cz>
    module: set MODULE_STATE_GOING state when a module fails to load

Takashi Iwai <tiwai@suse.de>
    ALSA: seq: Use bool for snd_seq_queue internal flags

Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
    media: gp8psk: initialize stats at power control logic

Anant Thazhemadam <anant.thazhemadam@gmail.com>
    misc: vmw_vmci: fix kernel info-leak by initializing dbells in vmci_ctx_get_chkpt_doorbells()

Rustam Kovhaev <rkovhaev@gmail.com>
    reiserfs: add check for an invalid ih_entry_count

Johan Hovold <johan@kernel.org>
    of: fix linker-section match-table corruption

Petr Vorel <petr.vorel@gmail.com>
    uapi: move constants from <linux/kernel.h> to <linux/const.h>

Johan Hovold <johan@kernel.org>
    USB: serial: digi_acceleport: fix write-wakeup deadlocks

Stefan Haberland <sth@linux.ibm.com>
    s390/dasd: fix hanging device offline processing

Kailang Yang <kailang@realtek.com>
    ALSA: hda/realtek - Dell headphone has noise on unmute for ALC236

Hui Wang <hui.wang@canonical.com>
    ALSA: hda - Fix a wrong FIXUP for alc289 on Dell machines

Kailang Yang <kailang@realtek.com>
    ALSA: hda/realtek - Support Dell headset mode for ALC3271

Johan Hovold <johan@kernel.org>
    ALSA: usb-audio: fix sync-ep altsetting sanity check

Alberto Aguirre <albaguirre@gmail.com>
    ALSA: usb-audio: simplify set_sync_ep_implicit_fb_quirk

Takashi Iwai <tiwai@suse.de>
    ALSA: hda/ca0132 - Fix work handling in delayed HP detection


-------------

Diffstat:

 Makefile                                |  4 +--
 arch/powerpc/sysdev/mpic_msgr.c         |  2 +-
 drivers/iio/magnetometer/mag3110.c      | 13 +++++++---
 drivers/media/usb/dvb-usb/gp8psk.c      |  2 +-
 drivers/misc/vmw_vmci/vmci_context.c    |  2 +-
 drivers/s390/block/dasd_alias.c         | 10 +++++++-
 drivers/usb/serial/digi_acceleport.c    | 45 ++++++++++-----------------------
 fs/quota/quota_tree.c                   |  8 +++---
 fs/reiserfs/stree.c                     |  6 +++++
 include/linux/of.h                      |  1 +
 include/uapi/linux/const.h              |  5 ++++
 include/uapi/linux/lightnvm.h           |  2 +-
 include/uapi/linux/netfilter/x_tables.h |  2 +-
 include/uapi/linux/netlink.h            |  2 +-
 include/uapi/linux/sysctl.h             |  2 +-
 kernel/module.c                         |  6 +++--
 sound/core/seq/seq_queue.h              |  8 +++---
 sound/pci/hda/patch_ca0132.c            | 16 ++++++++++--
 sound/pci/hda/patch_realtek.c           | 25 +++++++++++++++---
 sound/usb/pcm.c                         | 38 ++++++++++++----------------
 20 files changed, 116 insertions(+), 83 deletions(-)

[PATCH 4.4 01/19] ALSA: hda/ca0132 - Fix work handling in delayed HP detection

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 42fb6b1d41eb5905d77c06cad2e87b70289bdb76 upstream

CA0132 has the delayed HP jack detection code that is invoked from the
unsol handler, but it does a few weird things: it contains the cancel
of a work inside the work handler, and yet it misses the cancel-sync
call at (runtime-)suspend.  This patch addresses those issues.

Fixes: 15c2b3cc09a3 ("ALSA: hda/ca0132 - Fix possible workqueue stall")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191213085111.22855-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_ca0132.c |   16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

--- a/sound/pci/hda/patch_ca0132.c
+++ b/sound/pci/hda/patch_ca0132.c
@@ -4443,11 +4443,10 @@ static void hp_callback(struct hda_codec
 	/* Delay enabling the HP amp, to let the mic-detection
 	 * state machine run.
 	 */
-	cancel_delayed_work(&spec->unsol_hp_work);
-	schedule_delayed_work(&spec->unsol_hp_work, msecs_to_jiffies(500));
 	tbl = snd_hda_jack_tbl_get(codec, cb->nid);
 	if (tbl)
 		tbl->block_report = 1;
+	schedule_delayed_work(&spec->unsol_hp_work, msecs_to_jiffies(500));
 }
 
 static void amic_callback(struct hda_codec *codec, struct hda_jack_callback *cb)
@@ -4625,12 +4624,25 @@ static void ca0132_free(struct hda_codec
 	kfree(codec->spec);
 }
 
+#ifdef CONFIG_PM
+static int ca0132_suspend(struct hda_codec *codec)
+{
+	struct ca0132_spec *spec = codec->spec;
+
+	cancel_delayed_work_sync(&spec->unsol_hp_work);
+	return 0;
+}
+#endif
+
 static struct hda_codec_ops ca0132_patch_ops = {
 	.build_controls = ca0132_build_controls,
 	.build_pcms = ca0132_build_pcms,
 	.init = ca0132_init,
 	.free = ca0132_free,
 	.unsol_event = snd_hda_jack_unsol_event,
+#ifdef CONFIG_PM
+	.suspend = ca0132_suspend,
+#endif
 };
 
 static void ca0132_config(struct hda_codec *codec)

[PATCH 4.4 02/19] ALSA: usb-audio: simplify set_sync_ep_implicit_fb_quirk

[Greg Kroah-Hartman]

From: Alberto Aguirre <albaguirre@gmail.com>

commit 103e9625647ad74d201e26fb74afcd8479142a37 upstream

Signed-off-by: Alberto Aguirre <albaguirre@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/usb/pcm.c |   38 ++++++++++++++++----------------------
 1 file changed, 16 insertions(+), 22 deletions(-)

--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -324,6 +324,7 @@ static int set_sync_ep_implicit_fb_quirk
 	struct usb_host_interface *alts;
 	struct usb_interface *iface;
 	unsigned int ep;
+	unsigned int ifnum;
 
 	/* Implicit feedback sync EPs consumers are always playback EPs */
 	if (subs->direction != SNDRV_PCM_STREAM_PLAYBACK)
@@ -334,34 +335,19 @@ static int set_sync_ep_implicit_fb_quirk
 	case USB_ID(0x0763, 0x2031): /* M-Audio Fast Track C600 */
 	case USB_ID(0x22f0, 0x0006): /* Allen&Heath Qu-16 */
 		ep = 0x81;
-		iface = usb_ifnum_to_if(dev, 3);
-
-		if (!iface || iface->num_altsetting == 0)
-			return -EINVAL;
-
-		alts = &iface->altsetting[1];
-		goto add_sync_ep;
-		break;
+		ifnum = 3;
+		goto add_sync_ep_from_ifnum;
 	case USB_ID(0x0763, 0x2080): /* M-Audio FastTrack Ultra */
 	case USB_ID(0x0763, 0x2081):
 		ep = 0x81;
-		iface = usb_ifnum_to_if(dev, 2);
-
-		if (!iface || iface->num_altsetting == 0)
-			return -EINVAL;
-
-		alts = &iface->altsetting[1];
-		goto add_sync_ep;
+		ifnum = 2;
+		goto add_sync_ep_from_ifnum;
 	case USB_ID(0x1397, 0x0002):
 		ep = 0x81;
-		iface = usb_ifnum_to_if(dev, 1);
-
-		if (!iface || iface->num_altsetting == 0)
-			return -EINVAL;
-
-		alts = &iface->altsetting[1];
-		goto add_sync_ep;
+		ifnum = 1;
+		goto add_sync_ep_from_ifnum;
 	}
+
 	if (attr == USB_ENDPOINT_SYNC_ASYNC &&
 	    altsd->bInterfaceClass == USB_CLASS_VENDOR_SPEC &&
 	    altsd->bInterfaceProtocol == 2 &&
@@ -376,6 +362,14 @@ static int set_sync_ep_implicit_fb_quirk
 	/* No quirk */
 	return 0;
 
+add_sync_ep_from_ifnum:
+	iface = usb_ifnum_to_if(dev, ifnum);
+
+	if (!iface || iface->num_altsetting == 0)
+		return -EINVAL;
+
+	alts = &iface->altsetting[1];
+
 add_sync_ep:
 	subs->sync_endpoint = snd_usb_add_endpoint(subs->stream->chip,
 						   alts, ep, !subs->direction,

[PATCH 4.4 03/19] ALSA: usb-audio: fix sync-ep altsetting sanity check

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 5d1b71226dc4d44b4b65766fa9d74492f9d4587b upstream

The altsetting sanity check in set_sync_ep_implicit_fb_quirk() was
checking for there to be at least one altsetting but then went on to
access the second one, which may not exist.

This could lead to random slab data being used to initialise the sync
endpoint in snd_usb_add_endpoint().

Fixes: c75a8a7ae565 ("ALSA: snd-usb: add support for implicit feedback")
Fixes: ca10a7ebdff1 ("ALSA: usb-audio: FT C400 sync playback EP to capture EP")
Fixes: 5e35dc0338d8 ("ALSA: usb-audio: add implicit fb quirk for Behringer UFX1204")
Fixes: 17f08b0d9aaf ("ALSA: usb-audio: add implicit fb quirk for Axe-Fx II")
Fixes: 103e9625647a ("ALSA: usb-audio: simplify set_sync_ep_implicit_fb_quirk")
Cc: stable <stable@vger.kernel.org>     # 3.5
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20200114083953.1106-1-johan@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/usb/pcm.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -365,7 +365,7 @@ static int set_sync_ep_implicit_fb_quirk
 add_sync_ep_from_ifnum:
 	iface = usb_ifnum_to_if(dev, ifnum);
 
-	if (!iface || iface->num_altsetting == 0)
+	if (!iface || iface->num_altsetting < 2)
 		return -EINVAL;
 
 	alts = &iface->altsetting[1];

[PATCH 4.4 04/19] ALSA: hda/realtek - Support Dell headset mode for ALC3271

[Greg Kroah-Hartman]

From: Kailang Yang <kailang@realtek.com>

commit fcc6c877a01f83cbce1cca885ea62df6a10d33c3 upstream

Add DELL4_MIC_NO_PRESENCE model.
Add the pin configuration value of this machine into the pin_quirk
table to make DELL4_MIC_NO_PRESENCE apply to this machine.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -4848,6 +4848,7 @@ enum {
 	ALC269_FIXUP_DELL1_MIC_NO_PRESENCE,
 	ALC269_FIXUP_DELL2_MIC_NO_PRESENCE,
 	ALC269_FIXUP_DELL3_MIC_NO_PRESENCE,
+	ALC269_FIXUP_DELL4_MIC_NO_PRESENCE,
 	ALC269_FIXUP_HEADSET_MODE,
 	ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC,
 	ALC269_FIXUP_ASPIRE_HEADSET_MIC,
@@ -5150,6 +5151,16 @@ static const struct hda_fixup alc269_fix
 		.chained = true,
 		.chain_id = ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC
 	},
+	[ALC269_FIXUP_DELL4_MIC_NO_PRESENCE] = {
+		.type = HDA_FIXUP_PINS,
+		.v.pins = (const struct hda_pintbl[]) {
+			{ 0x19, 0x01a1913c }, /* use as headset mic, without its own jack detect */
+			{ 0x1b, 0x01a1913d }, /* use as headphone mic, without its own jack detect */
+			{ }
+		},
+		.chained = true,
+		.chain_id = ALC269_FIXUP_HEADSET_MODE
+	},
 	[ALC269_FIXUP_HEADSET_MODE] = {
 		.type = HDA_FIXUP_FUNC,
 		.v.func = alc_fixup_headset_mode,
@@ -6194,6 +6205,11 @@ static const struct snd_hda_pin_quirk al
 		{0x17, 0x90170110},
 		{0x1a, 0x03011020},
 		{0x21, 0x03211030}),
+	SND_HDA_PIN_QUIRK(0x10ec0299, 0x1028, "Dell", ALC269_FIXUP_DELL4_MIC_NO_PRESENCE,
+		ALC225_STANDARD_PINS,
+		{0x12, 0xb7a60130},
+		{0x13, 0xb8a60140},
+		{0x17, 0x90170110}),
 	{}
 };
 

[PATCH 4.4 05/19] ALSA: hda - Fix a wrong FIXUP for alc289 on Dell machines

[Greg Kroah-Hartman]

From: Hui Wang <hui.wang@canonical.com>

commit d5078193e56bb24f4593f00102a3b5e07bb84ee0 upstream

With the alc289, the Pin 0x1b is Headphone-Mic, so we should assign
ALC269_FIXUP_DELL4_MIC_NO_PRESENCE rather than
ALC225_FIXUP_DELL1_MIC_NO_PRESENCE to it. And this change is suggested
by Kailang of Realtek and is verified on the machine.

Fixes: 3f2f7c553d07 ("ALSA: hda - Fix headset mic detection problem for two Dell machines")
Cc: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6121,7 +6121,7 @@ static const struct snd_hda_pin_quirk al
 		{0x12, 0x90a60120},
 		{0x14, 0x90170110},
 		{0x21, 0x0321101f}),
-	SND_HDA_PIN_QUIRK(0x10ec0289, 0x1028, "Dell", ALC225_FIXUP_DELL1_MIC_NO_PRESENCE,
+	SND_HDA_PIN_QUIRK(0x10ec0289, 0x1028, "Dell", ALC269_FIXUP_DELL4_MIC_NO_PRESENCE,
 		{0x12, 0xb7a60130},
 		{0x14, 0x90170110},
 		{0x21, 0x04211020}),

[PATCH 4.4 06/19] ALSA: hda/realtek - Dell headphone has noise on unmute for ALC236

[Greg Kroah-Hartman]

From: Kailang Yang <kailang@realtek.com>

commit e1e8c1fdce8b00fce08784d9d738c60ebf598ebc upstream

headphone have noise even the volume is very small.
Let it fill up pcbeep hidden register to default value.
The issue was gone.

Fixes: 4344aec84bd8 ("ALSA: hda/realtek - New codec support for ALC256")
Fixes: 736f20a70608 ("ALSA: hda/realtek - Add support for ALC236/ALC3204")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/9ae47f23a64d4e41a9c81e263cd8a250@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -330,9 +330,7 @@ static void alc_fill_eapd_coef(struct hd
 	case 0x10ec0225:
 	case 0x10ec0233:
 	case 0x10ec0235:
-	case 0x10ec0236:
 	case 0x10ec0255:
-	case 0x10ec0256:
 	case 0x10ec0282:
 	case 0x10ec0283:
 	case 0x10ec0286:
@@ -342,6 +340,11 @@ static void alc_fill_eapd_coef(struct hd
 	case 0x10ec0299:
 		alc_update_coef_idx(codec, 0x10, 1<<9, 0);
 		break;
+	case 0x10ec0236:
+	case 0x10ec0256:
+		alc_write_coef_idx(codec, 0x36, 0x5757);
+		alc_update_coef_idx(codec, 0x10, 1<<9, 0);
+		break;
 	case 0x10ec0285:
 	case 0x10ec0293:
 		alc_update_coef_idx(codec, 0xa, 1<<13, 0);

[PATCH 4.4 07/19] s390/dasd: fix hanging device offline processing

[Greg Kroah-Hartman]

From: Stefan Haberland <sth@linux.ibm.com>

[ Upstream commit 658a337a606f48b7ebe451591f7681d383fa115e ]

For an LCU update a read unit address configuration IO is required.
This is started using sleep_on(), which has early exit paths in case the
device is not usable for IO. For example when it is in offline processing.

In those cases the LCU update should fail and not be retried.
Therefore lcu_update_work checks if EOPNOTSUPP is returned or not.

Commit 41995342b40c ("s390/dasd: fix endless loop after read unit address configuration")
accidentally removed the EOPNOTSUPP return code from
read_unit_address_configuration(), which in turn might lead to an endless
loop of the LCU update in offline processing.

Fix by returning EOPNOTSUPP again if the device is not able to perform the
request.

Fixes: 41995342b40c ("s390/dasd: fix endless loop after read unit address configuration")
Cc: stable@vger.kernel.org #5.3
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/block/dasd_alias.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/s390/block/dasd_alias.c b/drivers/s390/block/dasd_alias.c
index 89b708135000c..03543c0a2dd0f 100644
--- a/drivers/s390/block/dasd_alias.c
+++ b/drivers/s390/block/dasd_alias.c
@@ -475,11 +475,19 @@ static int read_unit_address_configuration(struct dasd_device *device,
 	spin_unlock_irqrestore(&lcu->lock, flags);
 
 	rc = dasd_sleep_on(cqr);
-	if (rc && !suborder_not_supported(cqr)) {
+	if (!rc)
+		goto out;
+
+	if (suborder_not_supported(cqr)) {
+		/* suborder not supported or device unusable for IO */
+		rc = -EOPNOTSUPP;
+	} else {
+		/* IO failed but should be retried */
 		spin_lock_irqsave(&lcu->lock, flags);
 		lcu->flags |= NEED_UAC_UPDATE;
 		spin_unlock_irqrestore(&lcu->lock, flags);
 	}
+out:
 	dasd_kfree_request(cqr, cqr->memdev);
 	return rc;
 }
-- 
2.27.0

[PATCH 4.4 08/19] USB: serial: digi_acceleport: fix write-wakeup deadlocks

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

[ Upstream commit 5098e77962e7c8947f87bd8c5869c83e000a522a ]

The driver must not call tty_wakeup() while holding its private lock as
line disciplines are allowed to call back into write() from
write_wakeup(), leading to a deadlock.

Also remove the unneeded work struct that was used to defer wakeup in
order to work around a possible race in ancient times (see comment about
n_tty write_chan() in commit 14b54e39b412 ("USB: serial: remove
changelogs and old todo entries")).

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/digi_acceleport.c |   45 ++++++++++-------------------------
 1 file changed, 13 insertions(+), 32 deletions(-)

--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -23,7 +23,6 @@
 #include <linux/tty_flip.h>
 #include <linux/module.h>
 #include <linux/spinlock.h>
-#include <linux/workqueue.h>
 #include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/wait.h>
@@ -201,14 +200,12 @@ struct digi_port {
 	int dp_throttle_restart;
 	wait_queue_head_t dp_flush_wait;
 	wait_queue_head_t dp_close_wait;	/* wait queue for close */
-	struct work_struct dp_wakeup_work;
 	struct usb_serial_port *dp_port;
 };
 
 
 /* Local Function Declarations */
 
-static void digi_wakeup_write_lock(struct work_struct *work);
 static int digi_write_oob_command(struct usb_serial_port *port,
 	unsigned char *buf, int count, int interruptible);
 static int digi_write_inb_command(struct usb_serial_port *port,
@@ -355,26 +352,6 @@ __releases(lock)
 	return timeout;
 }
 
-
-/*
- *  Digi Wakeup Write
- *
- *  Wake up port, line discipline, and tty processes sleeping
- *  on writes.
- */
-
-static void digi_wakeup_write_lock(struct work_struct *work)
-{
-	struct digi_port *priv =
-			container_of(work, struct digi_port, dp_wakeup_work);
-	struct usb_serial_port *port = priv->dp_port;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->dp_port_lock, flags);
-	tty_port_tty_wakeup(&port->port);
-	spin_unlock_irqrestore(&priv->dp_port_lock, flags);
-}
-
 /*
  *  Digi Write OOB Command
  *
@@ -986,6 +963,7 @@ static void digi_write_bulk_callback(str
 	struct digi_serial *serial_priv;
 	int ret = 0;
 	int status = urb->status;
+	bool wakeup;
 
 	/* port and serial sanity check */
 	if (port == NULL || (priv = usb_get_serial_port_data(port)) == NULL) {
@@ -1012,6 +990,7 @@ static void digi_write_bulk_callback(str
 	}
 
 	/* try to send any buffered data on this port */
+	wakeup = true;
 	spin_lock(&priv->dp_port_lock);
 	priv->dp_write_urb_in_use = 0;
 	if (priv->dp_out_buf_len > 0) {
@@ -1027,19 +1006,18 @@ static void digi_write_bulk_callback(str
 		if (ret == 0) {
 			priv->dp_write_urb_in_use = 1;
 			priv->dp_out_buf_len = 0;
+			wakeup = false;
 		}
 	}
-	/* wake up processes sleeping on writes immediately */
-	tty_port_tty_wakeup(&port->port);
-	/* also queue up a wakeup at scheduler time, in case we */
-	/* lost the race in write_chan(). */
-	schedule_work(&priv->dp_wakeup_work);
-
 	spin_unlock(&priv->dp_port_lock);
+
 	if (ret && ret != -EPERM)
 		dev_err_console(port,
 			"%s: usb_submit_urb failed, ret=%d, port=%d\n",
 			__func__, ret, priv->dp_port_num);
+
+	if (wakeup)
+		tty_port_tty_wakeup(&port->port);
 }
 
 static int digi_write_room(struct tty_struct *tty)
@@ -1239,7 +1217,6 @@ static int digi_port_init(struct usb_ser
 	init_waitqueue_head(&priv->dp_transmit_idle_wait);
 	init_waitqueue_head(&priv->dp_flush_wait);
 	init_waitqueue_head(&priv->dp_close_wait);
-	INIT_WORK(&priv->dp_wakeup_work, digi_wakeup_write_lock);
 	priv->dp_port = port;
 
 	init_waitqueue_head(&port->write_wait);
@@ -1525,13 +1502,14 @@ static int digi_read_oob_callback(struct
 			rts = tty->termios.c_cflag & CRTSCTS;
 		
 		if (tty && opcode == DIGI_CMD_READ_INPUT_SIGNALS) {
+			bool wakeup = false;
+
 			spin_lock(&priv->dp_port_lock);
 			/* convert from digi flags to termiox flags */
 			if (val & DIGI_READ_INPUT_SIGNALS_CTS) {
 				priv->dp_modem_signals |= TIOCM_CTS;
-				/* port must be open to use tty struct */
 				if (rts)
-					tty_port_tty_wakeup(&port->port);
+					wakeup = true;
 			} else {
 				priv->dp_modem_signals &= ~TIOCM_CTS;
 				/* port must be open to use tty struct */
@@ -1550,6 +1528,9 @@ static int digi_read_oob_callback(struct
 				priv->dp_modem_signals &= ~TIOCM_CD;
 
 			spin_unlock(&priv->dp_port_lock);
+
+			if (wakeup)
+				tty_port_tty_wakeup(&port->port);
 		} else if (opcode == DIGI_CMD_TRANSMIT_IDLE) {
 			spin_lock(&priv->dp_port_lock);
 			priv->dp_transmit_idle = 1;

[PATCH 4.4 09/19] uapi: move constants from <linux/kernel.h> to <linux/const.h>

[Greg Kroah-Hartman]

From: Petr Vorel <petr.vorel@gmail.com>

commit a85cbe6159ffc973e5702f70a3bd5185f8f3c38d upstream.

and include <linux/const.h> in UAPI headers instead of <linux/kernel.h>.

The reason is to avoid indirect <linux/sysinfo.h> include when using
some network headers: <linux/netlink.h> or others -> <linux/kernel.h>
-> <linux/sysinfo.h>.

This indirect include causes on MUSL redefinition of struct sysinfo when
included both <sys/sysinfo.h> and some of UAPI headers:

    In file included from x86_64-buildroot-linux-musl/sysroot/usr/include/linux/kernel.h:5,
                     from x86_64-buildroot-linux-musl/sysroot/usr/include/linux/netlink.h:5,
                     from ../include/tst_netlink.h:14,
                     from tst_crypto.c:13:
    x86_64-buildroot-linux-musl/sysroot/usr/include/linux/sysinfo.h:8:8: error: redefinition of `struct sysinfo'
     struct sysinfo {
            ^~~~~~~
    In file included from ../include/tst_safe_macros.h:15,
                     from ../include/tst_test.h:93,
                     from tst_crypto.c:11:
    x86_64-buildroot-linux-musl/sysroot/usr/include/sys/sysinfo.h:10:8: note: originally defined here

Link: https://lkml.kernel.org/r/20201015190013.8901-1-petr.vorel@gmail.com
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Suggested-by: Rich Felker <dalias@aerifal.cx>
Acked-by: Rich Felker <dalias@libc.org>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/uapi/linux/const.h              |    5 +++++
 include/uapi/linux/lightnvm.h           |    2 +-
 include/uapi/linux/netfilter/x_tables.h |    2 +-
 include/uapi/linux/netlink.h            |    2 +-
 include/uapi/linux/sysctl.h             |    2 +-
 5 files changed, 9 insertions(+), 4 deletions(-)

--- a/include/uapi/linux/const.h
+++ b/include/uapi/linux/const.h
@@ -24,4 +24,9 @@
 #define _BITUL(x)	(_AC(1,UL) << (x))
 #define _BITULL(x)	(_AC(1,ULL) << (x))
 
+#define __ALIGN_KERNEL(x, a)		__ALIGN_KERNEL_MASK(x, (typeof(x))(a) - 1)
+#define __ALIGN_KERNEL_MASK(x, mask)	(((x) + (mask)) & ~(mask))
+
+#define __KERNEL_DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d))
+
 #endif /* !(_LINUX_CONST_H) */
--- a/include/uapi/linux/lightnvm.h
+++ b/include/uapi/linux/lightnvm.h
@@ -20,7 +20,7 @@
 #define _UAPI_LINUX_LIGHTNVM_H
 
 #ifdef __KERNEL__
-#include <linux/kernel.h>
+#include <linux/const.h>
 #include <linux/ioctl.h>
 #else /* __KERNEL__ */
 #include <stdio.h>
--- a/include/uapi/linux/netfilter/x_tables.h
+++ b/include/uapi/linux/netfilter/x_tables.h
@@ -1,6 +1,6 @@
 #ifndef _UAPI_X_TABLES_H
 #define _UAPI_X_TABLES_H
-#include <linux/kernel.h>
+#include <linux/const.h>
 #include <linux/types.h>
 
 #define XT_FUNCTION_MAXNAMELEN 30
--- a/include/uapi/linux/netlink.h
+++ b/include/uapi/linux/netlink.h
@@ -1,7 +1,7 @@
 #ifndef _UAPI__LINUX_NETLINK_H
 #define _UAPI__LINUX_NETLINK_H
 
-#include <linux/kernel.h>
+#include <linux/const.h>
 #include <linux/socket.h> /* for __kernel_sa_family_t */
 #include <linux/types.h>
 
--- a/include/uapi/linux/sysctl.h
+++ b/include/uapi/linux/sysctl.h
@@ -22,7 +22,7 @@
 #ifndef _UAPI_LINUX_SYSCTL_H
 #define _UAPI_LINUX_SYSCTL_H
 
-#include <linux/kernel.h>
+#include <linux/const.h>
 #include <linux/types.h>
 #include <linux/compiler.h>
 

[PATCH 4.4 10/19] of: fix linker-section match-table corruption

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 5812b32e01c6d86ba7a84110702b46d8a8531fe9 upstream.

Specify type alignment when declaring linker-section match-table entries
to prevent gcc from increasing alignment and corrupting the various
tables with padding (e.g. timers, irqchips, clocks, reserved memory).

This is specifically needed on x86 where gcc (typically) aligns larger
objects like struct of_device_id with static extent on 32-byte
boundaries which at best prevents matching on anything but the first
entry. Specifying alignment when declaring variables suppresses this
optimisation.

Here's a 64-bit example where all entries are corrupt as 16 bytes of
padding has been inserted before the first entry:

	ffffffff8266b4b0 D __clk_of_table
	ffffffff8266b4c0 d __of_table_fixed_factor_clk
	ffffffff8266b5a0 d __of_table_fixed_clk
	ffffffff8266b680 d __clk_of_table_sentinel

And here's a 32-bit example where the 8-byte-aligned table happens to be
placed on a 32-byte boundary so that all but the first entry are corrupt
due to the 28 bytes of padding inserted between entries:

	812b3ec0 D __irqchip_of_table
	812b3ec0 d __of_table_irqchip1
	812b3fa0 d __of_table_irqchip2
	812b4080 d __of_table_irqchip3
	812b4160 d irqchip_of_match_end

Verified on x86 using gcc-9.3 and gcc-4.9 (which uses 64-byte
alignment), and on arm using gcc-7.2.

Note that there are no in-tree users of these tables on x86 currently
(even if they are included in the image).

Fixes: 54196ccbe0ba ("of: consolidate linker section OF match table declarations")
Fixes: f6e916b82022 ("irqchip: add basic infrastructure")
Cc: stable <stable@vger.kernel.org>     # 3.9
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20201123102319.8090-2-johan@kernel.org
[ johan: adjust context to 5.4 ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/of.h |    1 +
 1 file changed, 1 insertion(+)

--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -941,6 +941,7 @@ static inline int of_get_available_child
 #define _OF_DECLARE(table, name, compat, fn, fn_type)			\
 	static const struct of_device_id __of_table_##name		\
 		__used __section(__##table##_of_table)			\
+		__aligned(__alignof__(struct of_device_id))		\
 		 = { .compatible = compat,				\
 		     .data = (fn == (fn_type)NULL) ? fn : fn  }
 #else

[PATCH 4.4 11/19] reiserfs: add check for an invalid ih_entry_count

[Greg Kroah-Hartman]

From: Rustam Kovhaev <rkovhaev@gmail.com>

commit d24396c5290ba8ab04ba505176874c4e04a2d53c upstream.

when directory item has an invalid value set for ih_entry_count it might
trigger use-after-free or out-of-bounds read in bin_search_in_dir_item()

ih_entry_count * IH_SIZE for directory item should not be larger than
ih_item_len

Link: https://lore.kernel.org/r/20201101140958.3650143-1-rkovhaev@gmail.com
Reported-and-tested-by: syzbot+83b6f7cf9922cae5c4d7@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=83b6f7cf9922cae5c4d7
Signed-off-by: Rustam Kovhaev <rkovhaev@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/reiserfs/stree.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/fs/reiserfs/stree.c
+++ b/fs/reiserfs/stree.c
@@ -453,6 +453,12 @@ static int is_leaf(char *buf, int blocks
 					 "(second one): %h", ih);
 			return 0;
 		}
+		if (is_direntry_le_ih(ih) && (ih_item_len(ih) < (ih_entry_count(ih) * IH_SIZE))) {
+			reiserfs_warning(NULL, "reiserfs-5093",
+					 "item entry count seems wrong %h",
+					 ih);
+			return 0;
+		}
 		prev_location = ih_location(ih);
 	}
 

[PATCH 4.4 12/19] misc: vmw_vmci: fix kernel info-leak by initializing dbells in vmci_ctx_get_chkpt_doorbells()

[Greg Kroah-Hartman]

From: Anant Thazhemadam <anant.thazhemadam@gmail.com>

commit 31dcb6c30a26d32650ce134820f27de3c675a45a upstream.

A kernel-infoleak was reported by syzbot, which was caused because
dbells was left uninitialized.
Using kzalloc() instead of kmalloc() fixes this issue.

Reported-by: syzbot+a79e17c39564bedf0930@syzkaller.appspotmail.com
Tested-by: syzbot+a79e17c39564bedf0930@syzkaller.appspotmail.com
Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
Link: https://lore.kernel.org/r/20201122224534.333471-1-anant.thazhemadam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/misc/vmw_vmci/vmci_context.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/misc/vmw_vmci/vmci_context.c
+++ b/drivers/misc/vmw_vmci/vmci_context.c
@@ -750,7 +750,7 @@ static int vmci_ctx_get_chkpt_doorbells(
 			return VMCI_ERROR_MORE_DATA;
 		}
 
-		dbells = kmalloc(data_size, GFP_ATOMIC);
+		dbells = kzalloc(data_size, GFP_ATOMIC);
 		if (!dbells)
 			return VMCI_ERROR_NO_MEM;
 

[PATCH 4.4 13/19] media: gp8psk: initialize stats at power control logic

[Greg Kroah-Hartman]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

commit d0ac1a26ed5943127cb0156148735f5f52a07075 upstream.

As reported on:
	https://lore.kernel.org/linux-media/20190627222020.45909-1-willemdebruijn.kernel@gmail.com/

if gp8psk_usb_in_op() returns an error, the status var is not
initialized. Yet, this var is used later on, in order to
identify:
	- if the device was already started;
	- if firmware has loaded;
	- if the LNBf was powered on.

Using status = 0 seems to ensure that everything will be
properly powered up.

So, instead of the proposed solution, let's just set
status = 0.

Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/usb/dvb-usb/gp8psk.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/media/usb/dvb-usb/gp8psk.c
+++ b/drivers/media/usb/dvb-usb/gp8psk.c
@@ -163,7 +163,7 @@ out_rel_fw:
 
 static int gp8psk_power_ctrl(struct dvb_usb_device *d, int onoff)
 {
-	u8 status, buf;
+	u8 status = 0, buf;
 	int gp_product_id = le16_to_cpu(d->udev->descriptor.idProduct);
 
 	if (onoff) {

[PATCH 4.4 14/19] ALSA: seq: Use bool for snd_seq_queue internal flags

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 4ebd47037027c4beae99680bff3b20fdee5d7c1e upstream.

The snd_seq_queue struct contains various flags in the bit fields.
Those are categorized to two different use cases, both of which are
protected by different spinlocks.  That implies that there are still
potential risks of the bad operations for bit fields by concurrent
accesses.

For addressing the problem, this patch rearranges those flags to be
a standard bool instead of a bit field.

Reported-by: syzbot+63cbe31877bb80ef58f5@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20201206083456.21110-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/core/seq/seq_queue.h |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/sound/core/seq/seq_queue.h
+++ b/sound/core/seq/seq_queue.h
@@ -40,10 +40,10 @@ struct snd_seq_queue {
 	
 	struct snd_seq_timer *timer;	/* time keeper for this queue */
 	int	owner;		/* client that 'owns' the timer */
-	unsigned int	locked:1,	/* timer is only accesibble by owner if set */
-		klocked:1,	/* kernel lock (after START) */	
-		check_again:1,
-		check_blocked:1;
+	bool	locked;		/* timer is only accesibble by owner if set */
+	bool	klocked;	/* kernel lock (after START) */
+	bool	check_again;	/* concurrent access happened during check */
+	bool	check_blocked;	/* queue being checked */
 
 	unsigned int flags;		/* status flags */
 	unsigned int info_flags;	/* info for sync */

[PATCH 4.4 15/19] module: set MODULE_STATE_GOING state when a module fails to load

[Greg Kroah-Hartman]

From: Miroslav Benes <mbenes@suse.cz>

[ Upstream commit 5e8ed280dab9eeabc1ba0b2db5dbe9fe6debb6b5 ]

If a module fails to load due to an error in prepare_coming_module(),
the following error handling in load_module() runs with
MODULE_STATE_COMING in module's state. Fix it by correctly setting
MODULE_STATE_GOING under "bug_cleanup" label.

Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/module.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/module.c b/kernel/module.c
index 2f695b6e1a3e0..dcfc811d9ae2d 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -3589,6 +3589,7 @@ static int load_module(struct load_info *info, const char __user *uargs,
 	return do_init_module(mod);
 
  bug_cleanup:
+	mod->state = MODULE_STATE_GOING;
 	/* module_bug_cleanup needs module_mutex protection */
 	mutex_lock(&module_mutex);
 	module_bug_cleanup(mod);
-- 
2.27.0

[PATCH 4.4 16/19] quota: Dont overflow quota file offsets

[Greg Kroah-Hartman]

From: Jan Kara <jack@suse.cz>

[ Upstream commit 10f04d40a9fa29785206c619f80d8beedb778837 ]

The on-disk quota format supports quota files with upto 2^32 blocks. Be
careful when computing quota file offsets in the quota files from block
numbers as they can overflow 32-bit types. Since quota files larger than
4GB would require ~26 millions of quota users, this is mostly a
theoretical concern now but better be careful, fuzzers would find the
problem sooner or later anyway...

Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/quota/quota_tree.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/fs/quota/quota_tree.c b/fs/quota/quota_tree.c
index 58efb83dec1c8..3069b11867194 100644
--- a/fs/quota/quota_tree.c
+++ b/fs/quota/quota_tree.c
@@ -55,7 +55,7 @@ static ssize_t read_blk(struct qtree_mem_dqinfo *info, uint blk, char *buf)
 
 	memset(buf, 0, info->dqi_usable_bs);
 	return sb->s_op->quota_read(sb, info->dqi_type, buf,
-	       info->dqi_usable_bs, blk << info->dqi_blocksize_bits);
+	       info->dqi_usable_bs, (loff_t)blk << info->dqi_blocksize_bits);
 }
 
 static ssize_t write_blk(struct qtree_mem_dqinfo *info, uint blk, char *buf)
@@ -64,7 +64,7 @@ static ssize_t write_blk(struct qtree_mem_dqinfo *info, uint blk, char *buf)
 	ssize_t ret;
 
 	ret = sb->s_op->quota_write(sb, info->dqi_type, buf,
-	       info->dqi_usable_bs, blk << info->dqi_blocksize_bits);
+	       info->dqi_usable_bs, (loff_t)blk << info->dqi_blocksize_bits);
 	if (ret != info->dqi_usable_bs) {
 		quota_error(sb, "dquota write failed");
 		if (ret >= 0)
@@ -277,7 +277,7 @@ static uint find_free_dqentry(struct qtree_mem_dqinfo *info,
 			    blk);
 		goto out_buf;
 	}
-	dquot->dq_off = (blk << info->dqi_blocksize_bits) +
+	dquot->dq_off = ((loff_t)blk << info->dqi_blocksize_bits) +
 			sizeof(struct qt_disk_dqdbheader) +
 			i * info->dqi_entry_size;
 	kfree(buf);
@@ -552,7 +552,7 @@ static loff_t find_block_dqentry(struct qtree_mem_dqinfo *info,
 		ret = -EIO;
 		goto out_buf;
 	} else {
-		ret = (blk << info->dqi_blocksize_bits) + sizeof(struct
+		ret = ((loff_t)blk << info->dqi_blocksize_bits) + sizeof(struct
 		  qt_disk_dqdbheader) + i * info->dqi_entry_size;
 	}
 out_buf:
-- 
2.27.0

[PATCH 4.4 17/19] powerpc: sysdev: add missing iounmap() on error in mpic_msgr_probe()

[Greg Kroah-Hartman]

From: Qinglang Miao <miaoqinglang@huawei.com>

[ Upstream commit ffa1797040c5da391859a9556be7b735acbe1242 ]

I noticed that iounmap() of msgr_block_addr before return from
mpic_msgr_probe() in the error handling case is missing. So use
devm_ioremap() instead of just ioremap() when remapping the message
register block, so the mapping will be automatically released on
probe failure.

Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201028091551.136400-1-miaoqinglang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/sysdev/mpic_msgr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/sysdev/mpic_msgr.c b/arch/powerpc/sysdev/mpic_msgr.c
index 994fe73c2ed07..3140095ee7578 100644
--- a/arch/powerpc/sysdev/mpic_msgr.c
+++ b/arch/powerpc/sysdev/mpic_msgr.c
@@ -196,7 +196,7 @@ static int mpic_msgr_probe(struct platform_device *dev)
 
 	/* IO map the message register block. */
 	of_address_to_resource(np, 0, &rsrc);
-	msgr_block_addr = ioremap(rsrc.start, resource_size(&rsrc));
+	msgr_block_addr = devm_ioremap(&dev->dev, rsrc.start, resource_size(&rsrc));
 	if (!msgr_block_addr) {
 		dev_err(&dev->dev, "Failed to iomap MPIC message registers");
 		return -EFAULT;
-- 
2.27.0

[PATCH 4.4 18/19] module: delay kobject uevent until after module init call

[Greg Kroah-Hartman]

From: Jessica Yu <jeyu@kernel.org>

[ Upstream commit 38dc717e97153e46375ee21797aa54777e5498f3 ]

Apparently there has been a longstanding race between udev/systemd and
the module loader. Currently, the module loader sends a uevent right
after sysfs initialization, but before the module calls its init
function. However, some udev rules expect that the module has
initialized already upon receiving the uevent.

This race has been triggered recently (see link in references) in some
systemd mount unit files. For instance, the configfs module creates the
/sys/kernel/config mount point in its init function, however the module
loader issues the uevent before this happens. sys-kernel-config.mount
expects to be able to mount /sys/kernel/config upon receipt of the
module loading uevent, but if the configfs module has not called its
init function yet, then this directory will not exist and the mount unit
fails. A similar situation exists for sys-fs-fuse-connections.mount, as
the fuse sysfs mount point is created during the fuse module's init
function. If udev is faster than module initialization then the mount
unit would fail in a similar fashion.

To fix this race, delay the module KOBJ_ADD uevent until after the
module has finished calling its init routine.

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-By: Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/module.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/kernel/module.c
+++ b/kernel/module.c
@@ -1779,7 +1779,6 @@ static int mod_sysfs_init(struct module
 	if (err)
 		mod_kobject_put(mod);
 
-	/* delay uevent until full sysfs population */
 out:
 	return err;
 }
@@ -1813,7 +1812,6 @@ static int mod_sysfs_setup(struct module
 	add_sect_attrs(mod, info);
 	add_notes_attrs(mod, info);
 
-	kobject_uevent(&mod->mkobj.kobj, KOBJ_ADD);
 	return 0;
 
 out_unreg_param:
@@ -3301,6 +3299,9 @@ static noinline int do_init_module(struc
 	blocking_notifier_call_chain(&module_notify_list,
 				     MODULE_STATE_LIVE, mod);
 
+	/* Delay uevent until module has finished its init routine */
+	kobject_uevent(&mod->mkobj.kobj, KOBJ_ADD);
+
 	/*
 	 * We need to finish all async code before the module init sequence
 	 * is done.  This has potential to deadlock.  For example, a newly

[PATCH 4.4 19/19] iio:magnetometer:mag3110: Fix alignment and data leak issues.

[Greg Kroah-Hartman]

From: Jonathan Cameron <Jonathan.Cameron@huawei.com>

commit 89deb1334252ea4a8491d47654811e28b0790364 upstream

One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp() assumes the buffer used is aligned
to the size of the timestamp (8 bytes).  This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here.  We close both issues by
moving to a suitable structure in the iio_priv() data.
This data is allocated with kzalloc() so no data can leak apart from
previous readings.

The explicit alignment of ts is not necessary in this case but
does make the code slightly less fragile so I have included it.

Fixes: 39631b5f9584 ("iio: Add Freescale mag3110 magnetometer driver")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200920112742.170751-4-jic23@kernel.org
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/magnetometer/mag3110.c |   13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

--- a/drivers/iio/magnetometer/mag3110.c
+++ b/drivers/iio/magnetometer/mag3110.c
@@ -52,6 +52,12 @@ struct mag3110_data {
 	struct i2c_client *client;
 	struct mutex lock;
 	u8 ctrl_reg1;
+	/* Ensure natural alignment of timestamp */
+	struct {
+		__be16 channels[3];
+		u8 temperature;
+		s64 ts __aligned(8);
+	} scan;
 };
 
 static int mag3110_request(struct mag3110_data *data)
@@ -245,10 +251,9 @@ static irqreturn_t mag3110_trigger_handl
 	struct iio_poll_func *pf = p;
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct mag3110_data *data = iio_priv(indio_dev);
-	u8 buffer[16]; /* 3 16-bit channels + 1 byte temp + padding + ts */
 	int ret;
 
-	ret = mag3110_read(data, (__be16 *) buffer);
+	ret = mag3110_read(data, data->scan.channels);
 	if (ret < 0)
 		goto done;
 
@@ -257,10 +262,10 @@ static irqreturn_t mag3110_trigger_handl
 			MAG3110_DIE_TEMP);
 		if (ret < 0)
 			goto done;
-		buffer[6] = ret;
+		data->scan.temperature = ret;
 	}
 
-	iio_push_to_buffers_with_timestamp(indio_dev, buffer,
+	iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
 		iio_get_time_ns());
 
 done:

Re: [PATCH 4.4 00/19] 4.4.250-rc1 review

[Shuah Khan]

On 1/7/21 7:16 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.250 release.
> There are 19 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat, 09 Jan 2021 14:08:13 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.250-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah