From: Catalin Marinas <catalin.marinas@arm.com>
To: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Cc: song.bao.hua@hisilicon.com, xiexiuqi@huawei.com,
Chen Zhou <chenzhou10@huawei.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, huawei.libin@huawei.com,
akpm@linux-foundation.org, will@kernel.org, ardb@kernel.org,
rppt@kernel.org
Subject: Re: [PATCH 2/2] arm64: mm: fix kdump broken with ZONE_DMA reintroduced
Date: Thu, 7 Jan 2021 14:25:42 +0000 [thread overview]
Message-ID: <20210107142541.GA26159@gaia> (raw)
In-Reply-To: <653d43ed326e6a3974660c0ca2ad8a847a4ff986.camel@suse.de>
On Sat, Dec 26, 2020 at 11:34:58AM +0100, Nicolas Saenz Julienne wrote:
> On Sat, 2020-12-26 at 11:35 +0800, Chen Zhou wrote:
> > If the memory reserved for crash dump kernel falled in ZONE_DMA32,
> > the devices in crash dump kernel need to use ZONE_DMA will alloc fail.
> >
> > Fix this by reserving low memory in ZONE_DMA if CONFIG_ZONE_DMA is
> > enabled, otherwise, reserving in ZONE_DMA32.
> >
> > Fixes: bff3b04460a8 ("arm64: mm: reserve CMA and crashkernel in ZONE_DMA32")
>
> I'm not so sure this counts as a fix, if someone backports it it'll probably
> break things as it depends on the series that dynamically sizes DMA zones.
>
> > Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
> > ---
>
> Why not doing the same with CMA? You'll probably have to move the
> dma_contiguous_reserve() call into bootmem_init() so as to make sure that
> arm64_dma_phys_limit is populated.
Do we need the arm64_dma32_phys_limit at all? I can see the
(arm64_dma_phys_limit ? : arm64_dma32_phys_limit) pattern in several
places but I think we can just live with the arm64_dma_phys_limit.
Also, I don't think we need any early ARCH_LOW_ADDRESS_LIMIT. It's only
used by memblock_alloc_low() and that's called from swiotlb_init()
after arm64_dma_phys_limit was initialised.
What about something like below (on top of you ARCH_LOW_ADDRESS_LIMIT
fix but I can revert that)? I haven't tested it in all configurations
yet.
diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
index 69ad25fbeae4..ca2cd75d3286 100644
--- a/arch/arm64/include/asm/processor.h
+++ b/arch/arm64/include/asm/processor.h
@@ -94,8 +94,7 @@
#endif /* CONFIG_ARM64_FORCE_52BIT */
extern phys_addr_t arm64_dma_phys_limit;
-extern phys_addr_t arm64_dma32_phys_limit;
-#define ARCH_LOW_ADDRESS_LIMIT ((arm64_dma_phys_limit ? : arm64_dma32_phys_limit) - 1)
+#define ARCH_LOW_ADDRESS_LIMIT (arm64_dma_phys_limit - 1)
struct debug_info {
#ifdef CONFIG_HAVE_HW_BREAKPOINT
diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index 7deddf56f7c3..596a94bf5ed6 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -59,7 +59,6 @@ EXPORT_SYMBOL(memstart_addr);
* bit addressable memory area.
*/
phys_addr_t arm64_dma_phys_limit __ro_after_init;
-phys_addr_t arm64_dma32_phys_limit __ro_after_init;
#ifdef CONFIG_KEXEC_CORE
/*
@@ -84,7 +83,7 @@ static void __init reserve_crashkernel(void)
if (crash_base == 0) {
/* Current arm64 boot protocol requires 2MB alignment */
- crash_base = memblock_find_in_range(0, arm64_dma32_phys_limit,
+ crash_base = memblock_find_in_range(0, arm64_dma_phys_limit,
crash_size, SZ_2M);
if (crash_base == 0) {
pr_warn("cannot allocate crashkernel (size:0x%llx)\n",
@@ -196,6 +195,7 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max)
unsigned long max_zone_pfns[MAX_NR_ZONES] = {0};
unsigned int __maybe_unused acpi_zone_dma_bits;
unsigned int __maybe_unused dt_zone_dma_bits;
+ phys_addr_t dma32_phys_limit = max_zone_phys(32);
#ifdef CONFIG_ZONE_DMA
acpi_zone_dma_bits = fls64(acpi_iort_dma_get_max_cpu_address());
@@ -205,8 +205,12 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max)
max_zone_pfns[ZONE_DMA] = PFN_DOWN(arm64_dma_phys_limit);
#endif
#ifdef CONFIG_ZONE_DMA32
- max_zone_pfns[ZONE_DMA32] = PFN_DOWN(arm64_dma32_phys_limit);
+ max_zone_pfns[ZONE_DMA32] = PFN_DOWN(dma32_phys_limit);
+ if (!arm64_dma_phys_limit)
+ arm64_dma_phys_limit = dma32_phys_limit;
#endif
+ if (!arm64_dma_phys_limit)
+ arm64_dma_phys_limit = PHYS_MASK + 1;
max_zone_pfns[ZONE_NORMAL] = max;
free_area_init(max_zone_pfns);
@@ -394,16 +398,9 @@ void __init arm64_memblock_init(void)
early_init_fdt_scan_reserved_mem();
- if (IS_ENABLED(CONFIG_ZONE_DMA32))
- arm64_dma32_phys_limit = max_zone_phys(32);
- else
- arm64_dma32_phys_limit = PHYS_MASK + 1;
-
reserve_elfcorehdr();
high_memory = __va(memblock_end_of_DRAM() - 1) + 1;
-
- dma_contiguous_reserve(arm64_dma32_phys_limit);
}
void __init bootmem_init(void)
@@ -438,6 +435,11 @@ void __init bootmem_init(void)
sparse_init();
zone_sizes_init(min, max);
+ /*
+ * Reserve the CMA area after arm64_dma_phys_limit was initialised.
+ */
+ dma_contiguous_reserve(arm64_dma_phys_limit);
+
/*
* request_standard_resources() depends on crashkernel's memory being
* reserved, so do it here.
@@ -455,7 +457,7 @@ void __init bootmem_init(void)
void __init mem_init(void)
{
if (swiotlb_force == SWIOTLB_FORCE ||
- max_pfn > PFN_DOWN(arm64_dma_phys_limit ? : arm64_dma32_phys_limit))
+ max_pfn > PFN_DOWN(arm64_dma_phys_limit))
swiotlb_init(1);
else
swiotlb_force = SWIOTLB_NO_FORCE;
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Catalin Marinas <catalin.marinas@arm.com>
To: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Cc: Chen Zhou <chenzhou10@huawei.com>,
will@kernel.org, ardb@kernel.org, akpm@linux-foundation.org,
rppt@kernel.org, song.bao.hua@hisilicon.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, huawei.libin@huawei.com,
xiexiuqi@huawei.com
Subject: Re: [PATCH 2/2] arm64: mm: fix kdump broken with ZONE_DMA reintroduced
Date: Thu, 7 Jan 2021 14:25:42 +0000 [thread overview]
Message-ID: <20210107142541.GA26159@gaia> (raw)
In-Reply-To: <653d43ed326e6a3974660c0ca2ad8a847a4ff986.camel@suse.de>
On Sat, Dec 26, 2020 at 11:34:58AM +0100, Nicolas Saenz Julienne wrote:
> On Sat, 2020-12-26 at 11:35 +0800, Chen Zhou wrote:
> > If the memory reserved for crash dump kernel falled in ZONE_DMA32,
> > the devices in crash dump kernel need to use ZONE_DMA will alloc fail.
> >
> > Fix this by reserving low memory in ZONE_DMA if CONFIG_ZONE_DMA is
> > enabled, otherwise, reserving in ZONE_DMA32.
> >
> > Fixes: bff3b04460a8 ("arm64: mm: reserve CMA and crashkernel in ZONE_DMA32")
>
> I'm not so sure this counts as a fix, if someone backports it it'll probably
> break things as it depends on the series that dynamically sizes DMA zones.
>
> > Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
> > ---
>
> Why not doing the same with CMA? You'll probably have to move the
> dma_contiguous_reserve() call into bootmem_init() so as to make sure that
> arm64_dma_phys_limit is populated.
Do we need the arm64_dma32_phys_limit at all? I can see the
(arm64_dma_phys_limit ? : arm64_dma32_phys_limit) pattern in several
places but I think we can just live with the arm64_dma_phys_limit.
Also, I don't think we need any early ARCH_LOW_ADDRESS_LIMIT. It's only
used by memblock_alloc_low() and that's called from swiotlb_init()
after arm64_dma_phys_limit was initialised.
What about something like below (on top of you ARCH_LOW_ADDRESS_LIMIT
fix but I can revert that)? I haven't tested it in all configurations
yet.
diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
index 69ad25fbeae4..ca2cd75d3286 100644
--- a/arch/arm64/include/asm/processor.h
+++ b/arch/arm64/include/asm/processor.h
@@ -94,8 +94,7 @@
#endif /* CONFIG_ARM64_FORCE_52BIT */
extern phys_addr_t arm64_dma_phys_limit;
-extern phys_addr_t arm64_dma32_phys_limit;
-#define ARCH_LOW_ADDRESS_LIMIT ((arm64_dma_phys_limit ? : arm64_dma32_phys_limit) - 1)
+#define ARCH_LOW_ADDRESS_LIMIT (arm64_dma_phys_limit - 1)
struct debug_info {
#ifdef CONFIG_HAVE_HW_BREAKPOINT
diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index 7deddf56f7c3..596a94bf5ed6 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -59,7 +59,6 @@ EXPORT_SYMBOL(memstart_addr);
* bit addressable memory area.
*/
phys_addr_t arm64_dma_phys_limit __ro_after_init;
-phys_addr_t arm64_dma32_phys_limit __ro_after_init;
#ifdef CONFIG_KEXEC_CORE
/*
@@ -84,7 +83,7 @@ static void __init reserve_crashkernel(void)
if (crash_base == 0) {
/* Current arm64 boot protocol requires 2MB alignment */
- crash_base = memblock_find_in_range(0, arm64_dma32_phys_limit,
+ crash_base = memblock_find_in_range(0, arm64_dma_phys_limit,
crash_size, SZ_2M);
if (crash_base == 0) {
pr_warn("cannot allocate crashkernel (size:0x%llx)\n",
@@ -196,6 +195,7 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max)
unsigned long max_zone_pfns[MAX_NR_ZONES] = {0};
unsigned int __maybe_unused acpi_zone_dma_bits;
unsigned int __maybe_unused dt_zone_dma_bits;
+ phys_addr_t dma32_phys_limit = max_zone_phys(32);
#ifdef CONFIG_ZONE_DMA
acpi_zone_dma_bits = fls64(acpi_iort_dma_get_max_cpu_address());
@@ -205,8 +205,12 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max)
max_zone_pfns[ZONE_DMA] = PFN_DOWN(arm64_dma_phys_limit);
#endif
#ifdef CONFIG_ZONE_DMA32
- max_zone_pfns[ZONE_DMA32] = PFN_DOWN(arm64_dma32_phys_limit);
+ max_zone_pfns[ZONE_DMA32] = PFN_DOWN(dma32_phys_limit);
+ if (!arm64_dma_phys_limit)
+ arm64_dma_phys_limit = dma32_phys_limit;
#endif
+ if (!arm64_dma_phys_limit)
+ arm64_dma_phys_limit = PHYS_MASK + 1;
max_zone_pfns[ZONE_NORMAL] = max;
free_area_init(max_zone_pfns);
@@ -394,16 +398,9 @@ void __init arm64_memblock_init(void)
early_init_fdt_scan_reserved_mem();
- if (IS_ENABLED(CONFIG_ZONE_DMA32))
- arm64_dma32_phys_limit = max_zone_phys(32);
- else
- arm64_dma32_phys_limit = PHYS_MASK + 1;
-
reserve_elfcorehdr();
high_memory = __va(memblock_end_of_DRAM() - 1) + 1;
-
- dma_contiguous_reserve(arm64_dma32_phys_limit);
}
void __init bootmem_init(void)
@@ -438,6 +435,11 @@ void __init bootmem_init(void)
sparse_init();
zone_sizes_init(min, max);
+ /*
+ * Reserve the CMA area after arm64_dma_phys_limit was initialised.
+ */
+ dma_contiguous_reserve(arm64_dma_phys_limit);
+
/*
* request_standard_resources() depends on crashkernel's memory being
* reserved, so do it here.
@@ -455,7 +457,7 @@ void __init bootmem_init(void)
void __init mem_init(void)
{
if (swiotlb_force == SWIOTLB_FORCE ||
- max_pfn > PFN_DOWN(arm64_dma_phys_limit ? : arm64_dma32_phys_limit))
+ max_pfn > PFN_DOWN(arm64_dma_phys_limit))
swiotlb_init(1);
else
swiotlb_force = SWIOTLB_NO_FORCE;
next prev parent reply other threads:[~2021-01-07 14:27 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-26 3:35 [PATCH 0/2] arm64: mm: fix kdump broken with ZONE_DMA reintroduced Chen Zhou
2020-12-26 3:35 ` Chen Zhou
2020-12-26 3:35 ` [PATCH 1/2] arm64: mm: update the comments about ZONE_DMA Chen Zhou
2020-12-26 3:35 ` Chen Zhou
2020-12-26 10:35 ` Nicolas Saenz Julienne
2020-12-26 10:35 ` Nicolas Saenz Julienne
2020-12-26 3:35 ` [PATCH 2/2] arm64: mm: fix kdump broken with ZONE_DMA reintroduced Chen Zhou
2020-12-26 3:35 ` Chen Zhou
2020-12-26 10:34 ` Nicolas Saenz Julienne
2020-12-26 10:34 ` Nicolas Saenz Julienne
2020-12-28 7:32 ` chenzhou
2020-12-28 7:32 ` chenzhou
2021-01-07 18:34 ` Catalin Marinas
2021-01-07 18:34 ` Catalin Marinas
2021-01-07 14:25 ` Catalin Marinas [this message]
2021-01-07 14:25 ` Catalin Marinas
2021-01-08 1:09 ` chenzhou
2021-01-08 1:09 ` chenzhou
2021-01-20 12:40 ` [PATCH 0/2] " Will Deacon
2021-01-20 12:40 ` Will Deacon
2021-01-20 13:07 ` Catalin Marinas
2021-01-20 13:07 ` Catalin Marinas
2021-01-21 2:37 ` chenzhou
2021-01-21 2:37 ` chenzhou
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210107142541.GA26159@gaia \
--to=catalin.marinas@arm.com \
--cc=akpm@linux-foundation.org \
--cc=ardb@kernel.org \
--cc=chenzhou10@huawei.com \
--cc=huawei.libin@huawei.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nsaenzjulienne@suse.de \
--cc=rppt@kernel.org \
--cc=song.bao.hua@hisilicon.com \
--cc=will@kernel.org \
--cc=xiexiuqi@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.