[PATCH v4 2/6] dt-bindings: audio-graph-card: Add plls and sysclks properties

[Richard Fitzgerald <rf@opensource.cirrus.com>]

The audio-graph-card driver has properties for configuring the clocking
for DAIs within a component, but is missing properties for setting
up the PLLs and sysclks of the component.

This patch adds the two new properties 'plls' and 'sysclks' so that the
audio-graph-driver can fully configure the component clocking.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
---
 .../bindings/sound/audio-graph.yaml           | 46 +++++++++++++++++++
 1 file changed, 46 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/audio-graph.yaml b/Documentation/devicetree/bindings/sound/audio-graph.yaml
index 4b46794e5153..9e0819205a17 100644
--- a/Documentation/devicetree/bindings/sound/audio-graph.yaml
+++ b/Documentation/devicetree/bindings/sound/audio-graph.yaml
@@ -39,6 +39,52 @@ properties:
   mic-det-gpio:
     maxItems: 1
 
+  plls:
+    description: |
+      A list of component pll settings. There are 4 cells per PLL setting:
+        - phandle to the node of the codec or cpu component,
+        - component PLL id,
+        - component clock source id,
+        - frequency (in Hz) of the PLL output clock.
+      The PLL id and clock source id are specific to the particular component
+      so see the relevant component driver for the ids. Typically the
+      clock source id indicates the pin the source clock is connected to.
+      The same phandle can appear in multiple entries so that several plls
+      can be set in the same component.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
+  plls-clocks:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of clock names giving the source clock for each setting
+      in the plls property.
+
+  sysclks:
+    description: |
+      A list of component sysclk settings. There are 4 cells per sysclk
+      setting:
+        - phandle to the node of the codec or cpu component,
+        - component sysclk id,
+        - component clock source id,
+        - direction of the clock: 0 if the clock is an input to the component,
+          1 if it is an output.
+      The sysclk id and clock source id are specific to the particular
+      component so see the relevant component driver for the ids. Typically
+      the clock source id indicates the pin the source clock is connected to.
+      The same phandle can appear in multiple entries so that several sysclks
+      can be set in the same component.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
+  sysclks-clocks:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of clock names giving the source clock for each setting
+      in the sysclks property.
+
+dependencies:
+  plls: [ plls-clocks ]
+  sysclks: [ sysclks-clocks ]
+
 required:
   - dais
 
-- 
2.20.1