* [PATCH net-next v2 01/11] selftests: Move device validation in nettest
2021-01-10 0:18 [PATCH net-next v2 00/11] selftests: Updates to allow single instance of nettest for client and server David Ahern
@ 2021-01-10 0:18 ` David Ahern
2021-01-10 0:18 ` [PATCH net-next v2 02/11] selftests: Move convert_addr up " David Ahern
` (9 subsequent siblings)
10 siblings, 0 replies; 14+ messages in thread
From: David Ahern @ 2021-01-10 0:18 UTC (permalink / raw)
To: netdev; +Cc: davem, kuba, schoen, David Ahern
From: David Ahern <dsahern@gmail.com>
Later patch adds support for switching network namespaces before
running client, server or both. Device validations need to be
done after the network namespace switch, so add a helper to do it
and invoke in server and client code versus inline with argument
parsing. Move related argument checks as well.
Signed-off-by: David Ahern <dsahern@gmail.com>
---
tools/testing/selftests/net/nettest.c | 64 ++++++++++++++++++---------
1 file changed, 42 insertions(+), 22 deletions(-)
diff --git a/tools/testing/selftests/net/nettest.c b/tools/testing/selftests/net/nettest.c
index f75c53ce0a2d..2bb06a3e6880 100644
--- a/tools/testing/selftests/net/nettest.c
+++ b/tools/testing/selftests/net/nettest.c
@@ -84,6 +84,7 @@ struct sock_args {
unsigned int prefix_len;
/* expected addresses and device index for connection */
+ const char *expected_dev;
int expected_ifindex;
/* local address */
@@ -522,6 +523,33 @@ static int str_to_uint(const char *str, int min, int max, unsigned int *value)
return -1;
}
+static int resolve_devices(struct sock_args *args)
+{
+ if (args->dev) {
+ args->ifindex = get_ifidx(args->dev);
+ if (args->ifindex < 0) {
+ log_error("Invalid device name\n");
+ return 1;
+ }
+ }
+
+ if (args->expected_dev) {
+ unsigned int tmp;
+
+ if (str_to_uint(args->expected_dev, 0, INT_MAX, &tmp) == 0) {
+ args->expected_ifindex = (int)tmp;
+ } else {
+ args->expected_ifindex = get_ifidx(args->expected_dev);
+ if (args->expected_ifindex < 0) {
+ fprintf(stderr, "Invalid expected device\n");
+ return 1;
+ }
+ }
+ }
+
+ return 0;
+}
+
static int expected_addr_match(struct sockaddr *sa, void *expected,
const char *desc)
{
@@ -1190,6 +1218,9 @@ static int do_server(struct sock_args *args)
fd_set rfds;
int rc;
+ if (resolve_devices(args))
+ return 1;
+
if (prog_timeout)
ptval = &timeout;
@@ -1375,6 +1406,16 @@ static int do_client(struct sock_args *args)
return 1;
}
+ if (resolve_devices(args))
+ return 1;
+
+ if ((args->use_setsockopt || args->use_cmsg) && !args->ifindex) {
+ fprintf(stderr, "Device binding not specified\n");
+ return 1;
+ }
+ if (args->use_setsockopt || args->use_cmsg)
+ args->dev = NULL;
+
switch (args->version) {
case AF_INET:
sin.sin_port = htons(args->port);
@@ -1703,11 +1744,6 @@ int main(int argc, char *argv[])
break;
case 'd':
args.dev = optarg;
- args.ifindex = get_ifidx(optarg);
- if (args.ifindex < 0) {
- fprintf(stderr, "Invalid device name\n");
- return 1;
- }
break;
case 'i':
interactive = 1;
@@ -1738,16 +1774,7 @@ int main(int argc, char *argv[])
break;
case '2':
- if (str_to_uint(optarg, 0, INT_MAX, &tmp) == 0) {
- args.expected_ifindex = (int)tmp;
- } else {
- args.expected_ifindex = get_ifidx(optarg);
- if (args.expected_ifindex < 0) {
- fprintf(stderr,
- "Invalid expected device\n");
- return 1;
- }
- }
+ args.expected_dev = optarg;
break;
case 'q':
quiet = 1;
@@ -1769,13 +1796,6 @@ int main(int argc, char *argv[])
return 1;
}
- if ((args.use_setsockopt || args.use_cmsg) && !args.ifindex) {
- fprintf(stderr, "Device binding not specified\n");
- return 1;
- }
- if (args.use_setsockopt || args.use_cmsg)
- args.dev = NULL;
-
if (iter == 0) {
fprintf(stderr, "Invalid number of messages to send\n");
return 1;
--
2.24.3 (Apple Git-128)
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH net-next v2 02/11] selftests: Move convert_addr up in nettest
2021-01-10 0:18 [PATCH net-next v2 00/11] selftests: Updates to allow single instance of nettest for client and server David Ahern
2021-01-10 0:18 ` [PATCH net-next v2 01/11] selftests: Move device validation in nettest David Ahern
@ 2021-01-10 0:18 ` David Ahern
2021-01-10 0:18 ` [PATCH net-next v2 03/11] selftests: Move address validation " David Ahern
` (8 subsequent siblings)
10 siblings, 0 replies; 14+ messages in thread
From: David Ahern @ 2021-01-10 0:18 UTC (permalink / raw)
To: netdev; +Cc: davem, kuba, schoen, David Ahern
From: David Ahern <dsahern@gmail.com>
convert_addr needs to be invoked in a different location. Move
the code up to avoid a forward declaration.
Code move only.
Signed-off-by: David Ahern <dsahern@gmail.com>
---
tools/testing/selftests/net/nettest.c | 252 +++++++++++++-------------
1 file changed, 126 insertions(+), 126 deletions(-)
diff --git a/tools/testing/selftests/net/nettest.c b/tools/testing/selftests/net/nettest.c
index 2bb06a3e6880..337ae54e252d 100644
--- a/tools/testing/selftests/net/nettest.c
+++ b/tools/testing/selftests/net/nettest.c
@@ -627,6 +627,132 @@ static int show_sockstat(int sd, struct sock_args *args)
return rc;
}
+enum addr_type {
+ ADDR_TYPE_LOCAL,
+ ADDR_TYPE_REMOTE,
+ ADDR_TYPE_MCAST,
+ ADDR_TYPE_EXPECTED_LOCAL,
+ ADDR_TYPE_EXPECTED_REMOTE,
+ ADDR_TYPE_MD5_PREFIX,
+};
+
+static int convert_addr(struct sock_args *args, const char *_str,
+ enum addr_type atype)
+{
+ int pfx_len_max = args->version == AF_INET6 ? 128 : 32;
+ int family = args->version;
+ char *str, *dev, *sep;
+ struct in6_addr *in6;
+ struct in_addr *in;
+ const char *desc;
+ void *addr;
+ int rc = 0;
+
+ str = strdup(_str);
+ if (!str)
+ return -ENOMEM;
+
+ switch (atype) {
+ case ADDR_TYPE_LOCAL:
+ desc = "local";
+ addr = &args->local_addr;
+ break;
+ case ADDR_TYPE_REMOTE:
+ desc = "remote";
+ addr = &args->remote_addr;
+ break;
+ case ADDR_TYPE_MCAST:
+ desc = "mcast grp";
+ addr = &args->grp;
+ break;
+ case ADDR_TYPE_EXPECTED_LOCAL:
+ desc = "expected local";
+ addr = &args->expected_laddr;
+ break;
+ case ADDR_TYPE_EXPECTED_REMOTE:
+ desc = "expected remote";
+ addr = &args->expected_raddr;
+ break;
+ case ADDR_TYPE_MD5_PREFIX:
+ desc = "md5 prefix";
+ if (family == AF_INET) {
+ args->md5_prefix.v4.sin_family = AF_INET;
+ addr = &args->md5_prefix.v4.sin_addr;
+ } else if (family == AF_INET6) {
+ args->md5_prefix.v6.sin6_family = AF_INET6;
+ addr = &args->md5_prefix.v6.sin6_addr;
+ } else
+ return 1;
+
+ sep = strchr(str, '/');
+ if (sep) {
+ *sep = '\0';
+ sep++;
+ if (str_to_uint(sep, 1, pfx_len_max,
+ &args->prefix_len) != 0) {
+ fprintf(stderr, "Invalid port\n");
+ return 1;
+ }
+ } else {
+ args->prefix_len = pfx_len_max;
+ }
+ break;
+ default:
+ log_error("unknown address type");
+ exit(1);
+ }
+
+ switch (family) {
+ case AF_INET:
+ in = (struct in_addr *) addr;
+ if (str) {
+ if (inet_pton(AF_INET, str, in) == 0) {
+ log_error("Invalid %s IP address\n", desc);
+ rc = -1;
+ goto out;
+ }
+ } else {
+ in->s_addr = htonl(INADDR_ANY);
+ }
+ break;
+
+ case AF_INET6:
+ dev = strchr(str, '%');
+ if (dev) {
+ *dev = '\0';
+ dev++;
+ }
+
+ in6 = (struct in6_addr *) addr;
+ if (str) {
+ if (inet_pton(AF_INET6, str, in6) == 0) {
+ log_error("Invalid %s IPv6 address\n", desc);
+ rc = -1;
+ goto out;
+ }
+ } else {
+ *in6 = in6addr_any;
+ }
+ if (dev) {
+ args->scope_id = get_ifidx(dev);
+ if (args->scope_id < 0) {
+ log_error("Invalid scope on %s IPv6 address\n",
+ desc);
+ rc = -1;
+ goto out;
+ }
+ }
+ break;
+
+ default:
+ log_error("Invalid address family\n");
+ }
+
+out:
+ free(str);
+ return rc;
+}
+
static int get_index_from_cmsg(struct msghdr *m)
{
struct cmsghdr *cm;
@@ -1460,132 +1586,6 @@ static int do_client(struct sock_args *args)
return rc;
}
-enum addr_type {
- ADDR_TYPE_LOCAL,
- ADDR_TYPE_REMOTE,
- ADDR_TYPE_MCAST,
- ADDR_TYPE_EXPECTED_LOCAL,
- ADDR_TYPE_EXPECTED_REMOTE,
- ADDR_TYPE_MD5_PREFIX,
-};
-
-static int convert_addr(struct sock_args *args, const char *_str,
- enum addr_type atype)
-{
- int pfx_len_max = args->version == AF_INET6 ? 128 : 32;
- int family = args->version;
- char *str, *dev, *sep;
- struct in6_addr *in6;
- struct in_addr *in;
- const char *desc;
- void *addr;
- int rc = 0;
-
- str = strdup(_str);
- if (!str)
- return -ENOMEM;
-
- switch (atype) {
- case ADDR_TYPE_LOCAL:
- desc = "local";
- addr = &args->local_addr;
- break;
- case ADDR_TYPE_REMOTE:
- desc = "remote";
- addr = &args->remote_addr;
- break;
- case ADDR_TYPE_MCAST:
- desc = "mcast grp";
- addr = &args->grp;
- break;
- case ADDR_TYPE_EXPECTED_LOCAL:
- desc = "expected local";
- addr = &args->expected_laddr;
- break;
- case ADDR_TYPE_EXPECTED_REMOTE:
- desc = "expected remote";
- addr = &args->expected_raddr;
- break;
- case ADDR_TYPE_MD5_PREFIX:
- desc = "md5 prefix";
- if (family == AF_INET) {
- args->md5_prefix.v4.sin_family = AF_INET;
- addr = &args->md5_prefix.v4.sin_addr;
- } else if (family == AF_INET6) {
- args->md5_prefix.v6.sin6_family = AF_INET6;
- addr = &args->md5_prefix.v6.sin6_addr;
- } else
- return 1;
-
- sep = strchr(str, '/');
- if (sep) {
- *sep = '\0';
- sep++;
- if (str_to_uint(sep, 1, pfx_len_max,
- &args->prefix_len) != 0) {
- fprintf(stderr, "Invalid port\n");
- return 1;
- }
- } else {
- args->prefix_len = pfx_len_max;
- }
- break;
- default:
- log_error("unknown address type");
- exit(1);
- }
-
- switch (family) {
- case AF_INET:
- in = (struct in_addr *) addr;
- if (str) {
- if (inet_pton(AF_INET, str, in) == 0) {
- log_error("Invalid %s IP address\n", desc);
- rc = -1;
- goto out;
- }
- } else {
- in->s_addr = htonl(INADDR_ANY);
- }
- break;
-
- case AF_INET6:
- dev = strchr(str, '%');
- if (dev) {
- *dev = '\0';
- dev++;
- }
-
- in6 = (struct in6_addr *) addr;
- if (str) {
- if (inet_pton(AF_INET6, str, in6) == 0) {
- log_error("Invalid %s IPv6 address\n", desc);
- rc = -1;
- goto out;
- }
- } else {
- *in6 = in6addr_any;
- }
- if (dev) {
- args->scope_id = get_ifidx(dev);
- if (args->scope_id < 0) {
- log_error("Invalid scope on %s IPv6 address\n",
- desc);
- rc = -1;
- goto out;
- }
- }
- break;
-
- default:
- log_error("Invalid address family\n");
- }
-
-out:
- free(str);
- return rc;
-}
-
static char *random_msg(int len)
{
int i, n = 0, olen = len + 1;
--
2.24.3 (Apple Git-128)
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH net-next v2 03/11] selftests: Move address validation in nettest
2021-01-10 0:18 [PATCH net-next v2 00/11] selftests: Updates to allow single instance of nettest for client and server David Ahern
2021-01-10 0:18 ` [PATCH net-next v2 01/11] selftests: Move device validation in nettest David Ahern
2021-01-10 0:18 ` [PATCH net-next v2 02/11] selftests: Move convert_addr up " David Ahern
@ 2021-01-10 0:18 ` David Ahern
2021-01-10 0:18 ` [PATCH net-next v2 04/11] selftests: Add options to set network namespace to nettest David Ahern
` (7 subsequent siblings)
10 siblings, 0 replies; 14+ messages in thread
From: David Ahern @ 2021-01-10 0:18 UTC (permalink / raw)
To: netdev; +Cc: davem, kuba, schoen, David Ahern
From: David Ahern <dsahern@gmail.com>
IPv6 addresses can have a device name to declare a scope (e.g.,
fe80::5054:ff:fe12:3456%eth0). The next patch adds support to
switch network namespace before running client or server code
(or both), so move the address validation to the server and
client functions.
IPv4 multicast groups do not have the device scope in the address
specification, so they can be validated inline with option parsing.
Signed-off-by: David Ahern <dsahern@gmail.com>
---
tools/testing/selftests/net/nettest.c | 60 +++++++++++++++++++--------
1 file changed, 43 insertions(+), 17 deletions(-)
diff --git a/tools/testing/selftests/net/nettest.c b/tools/testing/selftests/net/nettest.c
index 337ae54e252d..3b083fad3577 100644
--- a/tools/testing/selftests/net/nettest.c
+++ b/tools/testing/selftests/net/nettest.c
@@ -43,12 +43,14 @@
struct sock_args {
/* local address */
+ const char *local_addr_str;
union {
struct in_addr in;
struct in6_addr in6;
} local_addr;
/* remote address */
+ const char *remote_addr_str;
union {
struct in_addr in;
struct in6_addr in6;
@@ -77,6 +79,7 @@ struct sock_args {
const char *password;
/* prefix for MD5 password */
+ const char *md5_prefix_str;
union {
struct sockaddr_in v4;
struct sockaddr_in6 v6;
@@ -88,12 +91,14 @@ struct sock_args {
int expected_ifindex;
/* local address */
+ const char *expected_laddr_str;
union {
struct in_addr in;
struct in6_addr in6;
} expected_laddr;
/* remote address */
+ const char *expected_raddr_str;
union {
struct in_addr in;
struct in6_addr in6;
@@ -753,6 +758,34 @@ static int convert_addr(struct sock_args *args, const char *_str,
return rc;
}
+static int validate_addresses(struct sock_args *args)
+{
+ if (args->local_addr_str &&
+ convert_addr(args, args->local_addr_str, ADDR_TYPE_LOCAL) < 0)
+ return 1;
+
+ if (args->remote_addr_str &&
+ convert_addr(args, args->remote_addr_str, ADDR_TYPE_REMOTE) < 0)
+ return 1;
+
+ if (args->md5_prefix_str &&
+ convert_addr(args, args->md5_prefix_str,
+ ADDR_TYPE_MD5_PREFIX) < 0)
+ return 1;
+
+ if (args->expected_laddr_str &&
+ convert_addr(args, args->expected_laddr_str,
+ ADDR_TYPE_EXPECTED_LOCAL))
+ return 1;
+
+ if (args->expected_raddr_str &&
+ convert_addr(args, args->expected_raddr_str,
+ ADDR_TYPE_EXPECTED_REMOTE))
+ return 1;
+
+ return 0;
+}
+
static int get_index_from_cmsg(struct msghdr *m)
{
struct cmsghdr *cm;
@@ -1344,7 +1377,7 @@ static int do_server(struct sock_args *args)
fd_set rfds;
int rc;
- if (resolve_devices(args))
+ if (resolve_devices(args) || validate_addresses(args))
return 1;
if (prog_timeout)
@@ -1532,7 +1565,7 @@ static int do_client(struct sock_args *args)
return 1;
}
- if (resolve_devices(args))
+ if (resolve_devices(args) || validate_addresses(args))
return 1;
if ((args->use_setsockopt || args->use_cmsg) && !args->ifindex) {
@@ -1680,13 +1713,11 @@ int main(int argc, char *argv[])
break;
case 'l':
args.has_local_ip = 1;
- if (convert_addr(&args, optarg, ADDR_TYPE_LOCAL) < 0)
- return 1;
+ args.local_addr_str = optarg;
break;
case 'r':
args.has_remote_ip = 1;
- if (convert_addr(&args, optarg, ADDR_TYPE_REMOTE) < 0)
- return 1;
+ args.remote_addr_str = optarg;
break;
case 'p':
if (str_to_uint(optarg, 1, 65535, &tmp) != 0) {
@@ -1733,8 +1764,7 @@ int main(int argc, char *argv[])
args.password = optarg;
break;
case 'm':
- if (convert_addr(&args, optarg, ADDR_TYPE_MD5_PREFIX) < 0)
- return 1;
+ args.md5_prefix_str = optarg;
break;
case 'S':
args.use_setsockopt = 1;
@@ -1762,16 +1792,11 @@ int main(int argc, char *argv[])
break;
case '0':
args.has_expected_laddr = 1;
- if (convert_addr(&args, optarg,
- ADDR_TYPE_EXPECTED_LOCAL))
- return 1;
+ args.expected_laddr_str = optarg;
break;
case '1':
args.has_expected_raddr = 1;
- if (convert_addr(&args, optarg,
- ADDR_TYPE_EXPECTED_REMOTE))
- return 1;
-
+ args.expected_raddr_str = optarg;
break;
case '2':
args.expected_dev = optarg;
@@ -1786,12 +1811,13 @@ int main(int argc, char *argv[])
}
if (args.password &&
- ((!args.has_remote_ip && !args.prefix_len) || args.type != SOCK_STREAM)) {
+ ((!args.has_remote_ip && !args.md5_prefix_str) ||
+ args.type != SOCK_STREAM)) {
log_error("MD5 passwords apply to TCP only and require a remote ip for the password\n");
return 1;
}
- if (args.prefix_len && !args.password) {
+ if (args.md5_prefix_str && !args.password) {
log_error("Prefix range for MD5 protection specified without a password\n");
return 1;
}
--
2.24.3 (Apple Git-128)
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH net-next v2 04/11] selftests: Add options to set network namespace to nettest
2021-01-10 0:18 [PATCH net-next v2 00/11] selftests: Updates to allow single instance of nettest for client and server David Ahern
` (2 preceding siblings ...)
2021-01-10 0:18 ` [PATCH net-next v2 03/11] selftests: Move address validation " David Ahern
@ 2021-01-10 0:18 ` David Ahern
2021-01-10 0:18 ` [PATCH net-next v2 05/11] selftests: Add support to nettest to run both client and server David Ahern
` (6 subsequent siblings)
10 siblings, 0 replies; 14+ messages in thread
From: David Ahern @ 2021-01-10 0:18 UTC (permalink / raw)
To: netdev; +Cc: davem, kuba, schoen, David Ahern
From: David Ahern <dsahern@gmail.com>
Add options to specify server and client network namespace to
use before running respective functions.
Signed-off-by: Seth David Schoen <schoen@loyalty.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
---
tools/testing/selftests/net/nettest.c | 56 ++++++++++++++++++++++++++-
1 file changed, 55 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/net/nettest.c b/tools/testing/selftests/net/nettest.c
index 3b083fad3577..cc9635b6461f 100644
--- a/tools/testing/selftests/net/nettest.c
+++ b/tools/testing/selftests/net/nettest.c
@@ -9,6 +9,7 @@
#include <sys/types.h>
#include <sys/ioctl.h>
#include <sys/socket.h>
+#include <sys/wait.h>
#include <linux/tcp.h>
#include <arpa/inet.h>
#include <net/if.h>
@@ -17,6 +18,7 @@
#include <fcntl.h>
#include <libgen.h>
#include <limits.h>
+#include <sched.h>
#include <stdarg.h>
#include <stdio.h>
#include <stdlib.h>
@@ -34,6 +36,8 @@
#define DEFAULT_PORT 12345
+#define NS_PREFIX "/run/netns/"
+
#ifndef MAX
#define MAX(a, b) ((a) > (b) ? (a) : (b))
#endif
@@ -77,6 +81,9 @@ struct sock_args {
const char *dev;
int ifindex;
+ const char *clientns;
+ const char *serverns;
+
const char *password;
/* prefix for MD5 password */
const char *md5_prefix_str;
@@ -213,6 +220,27 @@ static void log_address(const char *desc, struct sockaddr *sa)
fflush(stdout);
}
+static int switch_ns(const char *ns)
+{
+ char path[PATH_MAX];
+ int fd, ret;
+
+ if (geteuid())
+ log_error("warning: likely need root to set netns %s!\n", ns);
+
+ snprintf(path, sizeof(path), "%s%s", NS_PREFIX, ns);
+ fd = open(path, 0);
+ if (fd < 0) {
+ log_err_errno("Failed to open netns path; can not switch netns");
+ return 1;
+ }
+
+ ret = setns(fd, CLONE_NEWNET);
+ close(fd);
+
+ return ret;
+}
+
static int tcp_md5sig(int sd, void *addr, socklen_t alen, struct sock_args *args)
{
int keylen = strlen(args->password);
@@ -1377,6 +1405,15 @@ static int do_server(struct sock_args *args)
fd_set rfds;
int rc;
+ if (args->serverns) {
+ if (switch_ns(args->serverns)) {
+ log_error("Could not set server netns to %s\n",
+ args->serverns);
+ return 1;
+ }
+ log_msg("Switched server netns\n");
+ }
+
if (resolve_devices(args) || validate_addresses(args))
return 1;
@@ -1565,6 +1602,15 @@ static int do_client(struct sock_args *args)
return 1;
}
+ if (args->clientns) {
+ if (switch_ns(args->clientns)) {
+ log_error("Could not set client netns to %s\n",
+ args->clientns);
+ return 1;
+ }
+ log_msg("Switched client netns\n");
+ }
+
if (resolve_devices(args) || validate_addresses(args))
return 1;
@@ -1642,7 +1688,7 @@ static char *random_msg(int len)
return m;
}
-#define GETOPT_STR "sr:l:p:t:g:P:DRn:M:m:d:SCi6L:0:1:2:Fbq"
+#define GETOPT_STR "sr:l:p:t:g:P:DRn:M:m:d:N:O:SCi6L:0:1:2:Fbq"
static void print_usage(char *prog)
{
@@ -1656,6 +1702,8 @@ static void print_usage(char *prog)
" -t timeout seconds (default: none)\n"
"\n"
"Optional:\n"
+ " -N ns set client to network namespace ns (requires root)\n"
+ " -O ns set server to network namespace ns (requires root)\n"
" -F Restart server loop\n"
" -6 IPv6 (default is IPv4)\n"
" -P proto protocol for socket: icmp, ospf (default: none)\n"
@@ -1757,6 +1805,12 @@ int main(int argc, char *argv[])
case 'n':
iter = atoi(optarg);
break;
+ case 'N':
+ args.clientns = optarg;
+ break;
+ case 'O':
+ args.serverns = optarg;
+ break;
case 'L':
msg = random_msg(atoi(optarg));
break;
--
2.24.3 (Apple Git-128)
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH net-next v2 05/11] selftests: Add support to nettest to run both client and server
2021-01-10 0:18 [PATCH net-next v2 00/11] selftests: Updates to allow single instance of nettest for client and server David Ahern
` (3 preceding siblings ...)
2021-01-10 0:18 ` [PATCH net-next v2 04/11] selftests: Add options to set network namespace to nettest David Ahern
@ 2021-01-10 0:18 ` David Ahern
2021-01-10 0:18 ` [PATCH net-next v2 06/11] selftests: Use separate stdout and stderr buffers in nettest David Ahern
` (5 subsequent siblings)
10 siblings, 0 replies; 14+ messages in thread
From: David Ahern @ 2021-01-10 0:18 UTC (permalink / raw)
To: netdev; +Cc: davem, kuba, schoen, David Ahern
From: David Ahern <dsahern@gmail.com>
Add option to nettest to run both client and server within a
single instance. Client forks a child process to run the server
code. A pipe is used for the server to tell the client it has
initialized and is ready or had an error. This avoid unnecessary
sleeps to handle such race when the commands are separately launched.
Signed-off-by: Seth David Schoen <schoen@loyalty.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
---
tools/testing/selftests/net/nettest.c | 95 ++++++++++++++++++++++++---
1 file changed, 85 insertions(+), 10 deletions(-)
diff --git a/tools/testing/selftests/net/nettest.c b/tools/testing/selftests/net/nettest.c
index cc9635b6461f..0e4196027d63 100644
--- a/tools/testing/selftests/net/nettest.c
+++ b/tools/testing/selftests/net/nettest.c
@@ -1395,8 +1395,19 @@ static int lsock_init(struct sock_args *args)
return -1;
}
-static int do_server(struct sock_args *args)
+static void ipc_write(int fd, int message)
{
+ /* Not in both_mode, so there's no process to signal */
+ if (fd < 0)
+ return;
+
+ if (write(fd, &message, sizeof(message)) < 0)
+ log_err_errno("Failed to send client status");
+}
+
+static int do_server(struct sock_args *args, int ipc_fd)
+{
+ /* ipc_fd = -1 if no parent process to signal */
struct timeval timeout = { .tv_sec = prog_timeout }, *ptval = NULL;
unsigned char addr[sizeof(struct sockaddr_in6)] = {};
socklen_t alen = sizeof(addr);
@@ -1409,13 +1420,13 @@ static int do_server(struct sock_args *args)
if (switch_ns(args->serverns)) {
log_error("Could not set server netns to %s\n",
args->serverns);
- return 1;
+ goto err_exit;
}
log_msg("Switched server netns\n");
}
if (resolve_devices(args) || validate_addresses(args))
- return 1;
+ goto err_exit;
if (prog_timeout)
ptval = &timeout;
@@ -1426,24 +1437,25 @@ static int do_server(struct sock_args *args)
lsd = lsock_init(args);
if (lsd < 0)
- return 1;
+ goto err_exit;
if (args->bind_test_only) {
close(lsd);
- return 0;
+ goto err_exit;
}
if (args->type != SOCK_STREAM) {
rc = msg_loop(0, lsd, (void *) addr, alen, args);
close(lsd);
- return rc;
+ goto err_exit;
}
if (args->password && tcp_md5_remote(lsd, args)) {
close(lsd);
- return 1;
+ goto err_exit;
}
+ ipc_write(ipc_fd, 1);
while (1) {
log_msg("\n");
log_msg("waiting for client connection.\n");
@@ -1491,6 +1503,9 @@ static int do_server(struct sock_args *args)
close(lsd);
return rc;
+err_exit:
+ ipc_write(ipc_fd, 0);
+ return 1;
}
static int wait_for_connect(int sd)
@@ -1688,7 +1703,43 @@ static char *random_msg(int len)
return m;
}
-#define GETOPT_STR "sr:l:p:t:g:P:DRn:M:m:d:N:O:SCi6L:0:1:2:Fbq"
+static int ipc_child(int fd, struct sock_args *args)
+{
+ server_mode = 1; /* to tell log_msg in case we are in both_mode */
+
+ return do_server(args, fd);
+}
+
+static int ipc_parent(int cpid, int fd, struct sock_args *args)
+{
+ int client_status;
+ int status;
+ int buf;
+
+ /* do the client-side function here in the parent process,
+ * waiting to be told when to continue
+ */
+ if (read(fd, &buf, sizeof(buf)) <= 0) {
+ log_err_errno("Failed to read IPC status from status");
+ return 1;
+ }
+ if (!buf) {
+ log_error("Server failed; can not continue\n");
+ return 1;
+ }
+ log_msg("Server is ready\n");
+
+ client_status = do_client(args);
+ log_msg("parent is done!\n");
+
+ if (kill(cpid, 0) == 0)
+ kill(cpid, SIGKILL);
+
+ wait(&status);
+ return client_status;
+}
+
+#define GETOPT_STR "sr:l:p:t:g:P:DRn:M:m:d:BN:O:SCi6L:0:1:2:Fbq"
static void print_usage(char *prog)
{
@@ -1702,6 +1753,7 @@ static void print_usage(char *prog)
" -t timeout seconds (default: none)\n"
"\n"
"Optional:\n"
+ " -B do both client and server via fork and IPC\n"
" -N ns set client to network namespace ns (requires root)\n"
" -O ns set server to network namespace ns (requires root)\n"
" -F Restart server loop\n"
@@ -1740,8 +1792,11 @@ int main(int argc, char *argv[])
.port = DEFAULT_PORT,
};
struct protoent *pe;
+ int both_mode = 0;
unsigned int tmp;
int forever = 0;
+ int fd[2];
+ int cpid;
/* process inputs */
extern char *optarg;
@@ -1753,6 +1808,9 @@ int main(int argc, char *argv[])
while ((rc = getopt(argc, argv, GETOPT_STR)) != -1) {
switch (rc) {
+ case 'B':
+ both_mode = 1;
+ break;
case 's':
server_mode = 1;
break;
@@ -1892,7 +1950,7 @@ int main(int argc, char *argv[])
return 1;
}
- if (!server_mode && !args.has_grp &&
+ if ((both_mode || !server_mode) && !args.has_grp &&
!args.has_remote_ip && !args.has_local_ip) {
fprintf(stderr,
"Local (server mode) or remote IP (client IP) required\n");
@@ -1904,9 +1962,26 @@ int main(int argc, char *argv[])
msg = NULL;
}
+ if (both_mode) {
+ if (pipe(fd) < 0) {
+ perror("pipe");
+ exit(1);
+ }
+
+ cpid = fork();
+ if (cpid < 0) {
+ perror("fork");
+ exit(1);
+ }
+ if (cpid)
+ return ipc_parent(cpid, fd[0], &args);
+
+ return ipc_child(fd[1], &args);
+ }
+
if (server_mode) {
do {
- rc = do_server(&args);
+ rc = do_server(&args, -1);
} while (forever);
return rc;
--
2.24.3 (Apple Git-128)
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH net-next v2 06/11] selftests: Use separate stdout and stderr buffers in nettest
2021-01-10 0:18 [PATCH net-next v2 00/11] selftests: Updates to allow single instance of nettest for client and server David Ahern
` (4 preceding siblings ...)
2021-01-10 0:18 ` [PATCH net-next v2 05/11] selftests: Add support to nettest to run both client and server David Ahern
@ 2021-01-10 0:18 ` David Ahern
2021-01-12 0:15 ` Jakub Kicinski
2021-01-10 0:18 ` [PATCH net-next v2 07/11] selftests: Add missing newline in nettest error messages David Ahern
` (4 subsequent siblings)
10 siblings, 1 reply; 14+ messages in thread
From: David Ahern @ 2021-01-10 0:18 UTC (permalink / raw)
To: netdev; +Cc: davem, kuba, schoen, David Ahern
From: David Ahern <dsahern@gmail.com>
When a single instance of nettest is doing both client and
server modes, stdout and stderr messages can get interlaced
and become unreadable. Allocate a new set of buffers for the
child process handling server mode.
Signed-off-by: David Ahern <dsahern@gmail.com>
---
tools/testing/selftests/net/nettest.c | 20 +++++++++++++++++++-
1 file changed, 19 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/net/nettest.c b/tools/testing/selftests/net/nettest.c
index 0e4196027d63..13c74774e357 100644
--- a/tools/testing/selftests/net/nettest.c
+++ b/tools/testing/selftests/net/nettest.c
@@ -1705,9 +1705,27 @@ static char *random_msg(int len)
static int ipc_child(int fd, struct sock_args *args)
{
+ char *outbuf, *errbuf;
+ int rc;
+
+ outbuf = malloc(4096);
+ errbuf = malloc(4096);
+ if (!outbuf || !errbuf) {
+ fprintf(stderr, "server: Failed to allocate buffers for stdout and stderr\n");
+ return 1;
+ }
+
+ setbuffer(stdout, outbuf, 4096);
+ setbuffer(stderr, errbuf, 4096);
+
server_mode = 1; /* to tell log_msg in case we are in both_mode */
- return do_server(args, fd);
+ rc = do_server(args, fd);
+
+ free(outbuf);
+ free(errbuf);
+
+ return rc;
}
static int ipc_parent(int cpid, int fd, struct sock_args *args)
--
2.24.3 (Apple Git-128)
^ permalink raw reply related [flat|nested] 14+ messages in thread* Re: [PATCH net-next v2 06/11] selftests: Use separate stdout and stderr buffers in nettest
2021-01-10 0:18 ` [PATCH net-next v2 06/11] selftests: Use separate stdout and stderr buffers in nettest David Ahern
@ 2021-01-12 0:15 ` Jakub Kicinski
2021-01-12 0:20 ` David Ahern
0 siblings, 1 reply; 14+ messages in thread
From: Jakub Kicinski @ 2021-01-12 0:15 UTC (permalink / raw)
To: David Ahern; +Cc: netdev, davem, schoen, David Ahern
On Sat, 9 Jan 2021 17:18:47 -0700 David Ahern wrote:
> From: David Ahern <dsahern@gmail.com>
>
> When a single instance of nettest is doing both client and
> server modes, stdout and stderr messages can get interlaced
> and become unreadable. Allocate a new set of buffers for the
> child process handling server mode.
>
> Signed-off-by: David Ahern <dsahern@gmail.com>
> ---
> tools/testing/selftests/net/nettest.c | 20 +++++++++++++++++++-
> 1 file changed, 19 insertions(+), 1 deletion(-)
>
> diff --git a/tools/testing/selftests/net/nettest.c b/tools/testing/selftests/net/nettest.c
> index 0e4196027d63..13c74774e357 100644
> --- a/tools/testing/selftests/net/nettest.c
> +++ b/tools/testing/selftests/net/nettest.c
> @@ -1705,9 +1705,27 @@ static char *random_msg(int len)
>
> static int ipc_child(int fd, struct sock_args *args)
> {
> + char *outbuf, *errbuf;
> + int rc;
> +
> + outbuf = malloc(4096);
> + errbuf = malloc(4096);
> + if (!outbuf || !errbuf) {
> + fprintf(stderr, "server: Failed to allocate buffers for stdout and stderr\n");
> + return 1;
that's a memleak, rc = 1, goto free; ?
Also there's a few uses of fprintf(stderr, .. instead of log_error()
is there a reason for it?
I don't think this is a big deal, I'll apply unless you object in time.
> + }
> +
> + setbuffer(stdout, outbuf, 4096);
> + setbuffer(stderr, errbuf, 4096);
> +
> server_mode = 1; /* to tell log_msg in case we are in both_mode */
>
> - return do_server(args, fd);
> + rc = do_server(args, fd);
> +
> + free(outbuf);
> + free(errbuf);
> +
> + return rc;
> }
>
> static int ipc_parent(int cpid, int fd, struct sock_args *args)
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [PATCH net-next v2 06/11] selftests: Use separate stdout and stderr buffers in nettest
2021-01-12 0:15 ` Jakub Kicinski
@ 2021-01-12 0:20 ` David Ahern
0 siblings, 0 replies; 14+ messages in thread
From: David Ahern @ 2021-01-12 0:20 UTC (permalink / raw)
To: Jakub Kicinski, David Ahern; +Cc: netdev, davem, schoen
On 1/11/21 5:15 PM, Jakub Kicinski wrote:
>> diff --git a/tools/testing/selftests/net/nettest.c b/tools/testing/selftests/net/nettest.c
>> index 0e4196027d63..13c74774e357 100644
>> --- a/tools/testing/selftests/net/nettest.c
>> +++ b/tools/testing/selftests/net/nettest.c
>> @@ -1705,9 +1705,27 @@ static char *random_msg(int len)
>>
>> static int ipc_child(int fd, struct sock_args *args)
>> {
>> + char *outbuf, *errbuf;
>> + int rc;
>> +
>> + outbuf = malloc(4096);
>> + errbuf = malloc(4096);
>> + if (!outbuf || !errbuf) {
>> + fprintf(stderr, "server: Failed to allocate buffers for stdout and stderr\n");
>> + return 1;
>
> that's a memleak, rc = 1, goto free; ?
>
> Also there's a few uses of fprintf(stderr, .. instead of log_error()
> is there a reason for it?
>
> I don't think this is a big deal, I'll apply unless you object in time.
>
good catch. I found a bug in patch 5 as well. I'll fix and re-send.
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH net-next v2 07/11] selftests: Add missing newline in nettest error messages
2021-01-10 0:18 [PATCH net-next v2 00/11] selftests: Updates to allow single instance of nettest for client and server David Ahern
` (5 preceding siblings ...)
2021-01-10 0:18 ` [PATCH net-next v2 06/11] selftests: Use separate stdout and stderr buffers in nettest David Ahern
@ 2021-01-10 0:18 ` David Ahern
2021-01-10 0:18 ` [PATCH net-next v2 08/11] selftests: Make address validation apply only to client mode David Ahern
` (3 subsequent siblings)
10 siblings, 0 replies; 14+ messages in thread
From: David Ahern @ 2021-01-10 0:18 UTC (permalink / raw)
To: netdev; +Cc: davem, kuba, schoen, David Ahern
From: David Ahern <dsahern@gmail.com>
A few logging lines are missing the newline, or need it moved up for
cleaner logging.
Signed-off-by: David Ahern <dsahern@gmail.com>
---
tools/testing/selftests/net/nettest.c | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)
diff --git a/tools/testing/selftests/net/nettest.c b/tools/testing/selftests/net/nettest.c
index 13c74774e357..159430a0fc9b 100644
--- a/tools/testing/selftests/net/nettest.c
+++ b/tools/testing/selftests/net/nettest.c
@@ -199,7 +199,7 @@ static void log_address(const char *desc, struct sockaddr *sa)
if (sa->sa_family == AF_INET) {
struct sockaddr_in *s = (struct sockaddr_in *) sa;
- log_msg("%s %s:%d",
+ log_msg("%s %s:%d\n",
desc,
inet_ntop(AF_INET, &s->sin_addr, addrstr,
sizeof(addrstr)),
@@ -208,15 +208,13 @@ static void log_address(const char *desc, struct sockaddr *sa)
} else if (sa->sa_family == AF_INET6) {
struct sockaddr_in6 *s6 = (struct sockaddr_in6 *) sa;
- log_msg("%s [%s]:%d",
+ log_msg("%s [%s]:%d\n",
desc,
inet_ntop(AF_INET6, &s6->sin6_addr, addrstr,
sizeof(addrstr)),
ntohs(s6->sin6_port));
}
- printf("\n");
-
fflush(stdout);
}
@@ -594,7 +592,7 @@ static int expected_addr_match(struct sockaddr *sa, void *expected,
struct in_addr *exp_in = (struct in_addr *) expected;
if (s->sin_addr.s_addr != exp_in->s_addr) {
- log_error("%s address does not match expected %s",
+ log_error("%s address does not match expected %s\n",
desc,
inet_ntop(AF_INET, exp_in,
addrstr, sizeof(addrstr)));
@@ -605,14 +603,14 @@ static int expected_addr_match(struct sockaddr *sa, void *expected,
struct in6_addr *exp_in = (struct in6_addr *) expected;
if (memcmp(&s6->sin6_addr, exp_in, sizeof(*exp_in))) {
- log_error("%s address does not match expected %s",
+ log_error("%s address does not match expected %s\n",
desc,
inet_ntop(AF_INET6, exp_in,
addrstr, sizeof(addrstr)));
rc = 1;
}
} else {
- log_error("%s address does not match expected - unknown family",
+ log_error("%s address does not match expected - unknown family\n",
desc);
rc = 1;
}
@@ -731,7 +729,7 @@ static int convert_addr(struct sock_args *args, const char *_str,
}
break;
default:
- log_error("unknown address type");
+ log_error("unknown address type\n");
exit(1);
}
--
2.24.3 (Apple Git-128)
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH net-next v2 08/11] selftests: Make address validation apply only to client mode
2021-01-10 0:18 [PATCH net-next v2 00/11] selftests: Updates to allow single instance of nettest for client and server David Ahern
` (6 preceding siblings ...)
2021-01-10 0:18 ` [PATCH net-next v2 07/11] selftests: Add missing newline in nettest error messages David Ahern
@ 2021-01-10 0:18 ` David Ahern
2021-01-10 0:18 ` [PATCH net-next v2 09/11] selftests: Consistently specify address for MD5 protection David Ahern
` (2 subsequent siblings)
10 siblings, 0 replies; 14+ messages in thread
From: David Ahern @ 2021-01-10 0:18 UTC (permalink / raw)
To: netdev; +Cc: davem, kuba, schoen, David Ahern
From: David Ahern <dsahern@gmail.com>
When a single instance of nettest is used for client and server
make sure address validation is only done for client mode.
Signed-off-by: David Ahern <dsahern@gmail.com>
---
tools/testing/selftests/net/nettest.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/tools/testing/selftests/net/nettest.c b/tools/testing/selftests/net/nettest.c
index 159430a0fc9b..828dc7e879f2 100644
--- a/tools/testing/selftests/net/nettest.c
+++ b/tools/testing/selftests/net/nettest.c
@@ -1718,6 +1718,12 @@ static int ipc_child(int fd, struct sock_args *args)
server_mode = 1; /* to tell log_msg in case we are in both_mode */
+ /* when running in both mode, address validation applies
+ * solely to client side
+ */
+ args->has_expected_laddr = 0;
+ args->has_expected_raddr = 0;
+
rc = do_server(args, fd);
free(outbuf);
--
2.24.3 (Apple Git-128)
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH net-next v2 09/11] selftests: Consistently specify address for MD5 protection
2021-01-10 0:18 [PATCH net-next v2 00/11] selftests: Updates to allow single instance of nettest for client and server David Ahern
` (7 preceding siblings ...)
2021-01-10 0:18 ` [PATCH net-next v2 08/11] selftests: Make address validation apply only to client mode David Ahern
@ 2021-01-10 0:18 ` David Ahern
2021-01-10 0:18 ` [PATCH net-next v2 10/11] selftests: Add new option for client-side passwords David Ahern
2021-01-10 0:18 ` [PATCH net-next v2 11/11] selftests: Add separate options for server device bindings David Ahern
10 siblings, 0 replies; 14+ messages in thread
From: David Ahern @ 2021-01-10 0:18 UTC (permalink / raw)
To: netdev; +Cc: davem, kuba, schoen, David Ahern
From: David Ahern <dsahern@gmail.com>
nettest started with -r as the remote address for MD5 passwords.
The -m argument was added to use prefixes with a length when that
feature was added to the kernel. Since -r is used to specify
remote address for client mode, change nettest to only use -m
for MD5 passwords and update fcnal-test script.
Signed-off-by: David Ahern <dsahern@gmail.com>
---
tools/testing/selftests/net/fcnal-test.sh | 60 +++++++++++------------
tools/testing/selftests/net/nettest.c | 6 +--
2 files changed, 33 insertions(+), 33 deletions(-)
diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh
index 02b0b9ead40b..edd33f83f80e 100755
--- a/tools/testing/selftests/net/fcnal-test.sh
+++ b/tools/testing/selftests/net/fcnal-test.sh
@@ -801,7 +801,7 @@ ipv4_tcp_md5_novrf()
# basic use case
log_start
- run_cmd nettest -s -M ${MD5_PW} -r ${NSB_IP} &
+ run_cmd nettest -s -M ${MD5_PW} -m ${NSB_IP} &
sleep 1
run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW}
log_test $? 0 "MD5: Single address config"
@@ -817,7 +817,7 @@ ipv4_tcp_md5_novrf()
# wrong password
log_start
show_hint "Should timeout since client uses wrong password"
- run_cmd nettest -s -M ${MD5_PW} -r ${NSB_IP} &
+ run_cmd nettest -s -M ${MD5_PW} -m ${NSB_IP} &
sleep 1
run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_WRONG_PW}
log_test $? 2 "MD5: Client uses wrong password"
@@ -825,7 +825,7 @@ ipv4_tcp_md5_novrf()
# client from different address
log_start
show_hint "Should timeout due to MD5 mismatch"
- run_cmd nettest -s -M ${MD5_PW} -r ${NSB_LO_IP} &
+ run_cmd nettest -s -M ${MD5_PW} -m ${NSB_LO_IP} &
sleep 1
run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW}
log_test $? 2 "MD5: Client address does not match address configured with password"
@@ -869,7 +869,7 @@ ipv4_tcp_md5()
# basic use case
log_start
- run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP} &
+ run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
sleep 1
run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW}
log_test $? 0 "MD5: VRF: Single address config"
@@ -885,7 +885,7 @@ ipv4_tcp_md5()
# wrong password
log_start
show_hint "Should timeout since client uses wrong password"
- run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP} &
+ run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
sleep 1
run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_WRONG_PW}
log_test $? 2 "MD5: VRF: Client uses wrong password"
@@ -893,7 +893,7 @@ ipv4_tcp_md5()
# client from different address
log_start
show_hint "Should timeout since server config differs from client"
- run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -r ${NSB_LO_IP} &
+ run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_LO_IP} &
sleep 1
run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW}
log_test $? 2 "MD5: VRF: Client address does not match address configured with password"
@@ -930,31 +930,31 @@ ipv4_tcp_md5()
#
log_start
- run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP} &
- run_cmd nettest -s -M ${MD5_WRONG_PW} -r ${NSB_IP} &
+ run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
+ run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} &
sleep 1
run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW}
log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF"
log_start
- run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP} &
- run_cmd nettest -s -M ${MD5_WRONG_PW} -r ${NSB_IP} &
+ run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
+ run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} &
sleep 1
run_cmd_nsc nettest -r ${NSA_IP} -M ${MD5_WRONG_PW}
log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF"
log_start
show_hint "Should timeout since client in default VRF uses VRF password"
- run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP} &
- run_cmd nettest -s -M ${MD5_WRONG_PW} -r ${NSB_IP} &
+ run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
+ run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} &
sleep 1
run_cmd_nsc nettest -r ${NSA_IP} -M ${MD5_PW}
log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF with VRF pw"
log_start
show_hint "Should timeout since client in VRF uses default VRF password"
- run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP} &
- run_cmd nettest -s -M ${MD5_WRONG_PW} -r ${NSB_IP} &
+ run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
+ run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} &
sleep 1
run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_WRONG_PW}
log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF with default VRF pw"
@@ -993,7 +993,7 @@ ipv4_tcp_md5()
# negative tests
#
log_start
- run_cmd nettest -s -d ${NSA_DEV} -M ${MD5_PW} -r ${NSB_IP}
+ run_cmd nettest -s -d ${NSA_DEV} -M ${MD5_PW} -m ${NSB_IP}
log_test $? 1 "MD5: VRF: Device must be a VRF - single address"
log_start
@@ -2265,7 +2265,7 @@ ipv6_tcp_md5_novrf()
# basic use case
log_start
- run_cmd nettest -6 -s -M ${MD5_PW} -r ${NSB_IP6} &
+ run_cmd nettest -6 -s -M ${MD5_PW} -m ${NSB_IP6} &
sleep 1
run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
log_test $? 0 "MD5: Single address config"
@@ -2281,7 +2281,7 @@ ipv6_tcp_md5_novrf()
# wrong password
log_start
show_hint "Should timeout since client uses wrong password"
- run_cmd nettest -6 -s -M ${MD5_PW} -r ${NSB_IP6} &
+ run_cmd nettest -6 -s -M ${MD5_PW} -m ${NSB_IP6} &
sleep 1
run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_WRONG_PW}
log_test $? 2 "MD5: Client uses wrong password"
@@ -2289,7 +2289,7 @@ ipv6_tcp_md5_novrf()
# client from different address
log_start
show_hint "Should timeout due to MD5 mismatch"
- run_cmd nettest -6 -s -M ${MD5_PW} -r ${NSB_LO_IP6} &
+ run_cmd nettest -6 -s -M ${MD5_PW} -m ${NSB_LO_IP6} &
sleep 1
run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
log_test $? 2 "MD5: Client address does not match address configured with password"
@@ -2333,7 +2333,7 @@ ipv6_tcp_md5()
# basic use case
log_start
- run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP6} &
+ run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
sleep 1
run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
log_test $? 0 "MD5: VRF: Single address config"
@@ -2349,7 +2349,7 @@ ipv6_tcp_md5()
# wrong password
log_start
show_hint "Should timeout since client uses wrong password"
- run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP6} &
+ run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
sleep 1
run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_WRONG_PW}
log_test $? 2 "MD5: VRF: Client uses wrong password"
@@ -2357,7 +2357,7 @@ ipv6_tcp_md5()
# client from different address
log_start
show_hint "Should timeout since server config differs from client"
- run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -r ${NSB_LO_IP6} &
+ run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_LO_IP6} &
sleep 1
run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
log_test $? 2 "MD5: VRF: Client address does not match address configured with password"
@@ -2394,31 +2394,31 @@ ipv6_tcp_md5()
#
log_start
- run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP6} &
- run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -r ${NSB_IP6} &
+ run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
+ run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} &
sleep 1
run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF"
log_start
- run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP6} &
- run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -r ${NSB_IP6} &
+ run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
+ run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} &
sleep 1
run_cmd_nsc nettest -6 -r ${NSA_IP6} -M ${MD5_WRONG_PW}
log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF"
log_start
show_hint "Should timeout since client in default VRF uses VRF password"
- run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP6} &
- run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -r ${NSB_IP6} &
+ run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
+ run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} &
sleep 1
run_cmd_nsc nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF with VRF pw"
log_start
show_hint "Should timeout since client in VRF uses default VRF password"
- run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP6} &
- run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -r ${NSB_IP6} &
+ run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
+ run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} &
sleep 1
run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_WRONG_PW}
log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF with default VRF pw"
@@ -2457,7 +2457,7 @@ ipv6_tcp_md5()
# negative tests
#
log_start
- run_cmd nettest -6 -s -d ${NSA_DEV} -M ${MD5_PW} -r ${NSB_IP6}
+ run_cmd nettest -6 -s -d ${NSA_DEV} -M ${MD5_PW} -m ${NSB_IP6}
log_test $? 1 "MD5: VRF: Device must be a VRF - single address"
log_start
diff --git a/tools/testing/selftests/net/nettest.c b/tools/testing/selftests/net/nettest.c
index 828dc7e879f2..8a3ddc51883f 100644
--- a/tools/testing/selftests/net/nettest.c
+++ b/tools/testing/selftests/net/nettest.c
@@ -291,13 +291,13 @@ static int tcp_md5_remote(int sd, struct sock_args *args)
switch (args->version) {
case AF_INET:
sin.sin_port = htons(args->port);
- sin.sin_addr = args->remote_addr.in;
+ sin.sin_addr = args->md5_prefix.v4.sin_addr;
addr = &sin;
alen = sizeof(sin);
break;
case AF_INET6:
sin6.sin6_port = htons(args->port);
- sin6.sin6_addr = args->remote_addr.in6;
+ sin6.sin6_addr = args->md5_prefix.v6.sin6_addr;
addr = &sin6;
alen = sizeof(sin6);
break;
@@ -725,7 +725,7 @@ static int convert_addr(struct sock_args *args, const char *_str,
return 1;
}
} else {
- args->prefix_len = pfx_len_max;
+ args->prefix_len = 0;
}
break;
default:
--
2.24.3 (Apple Git-128)
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH net-next v2 10/11] selftests: Add new option for client-side passwords
2021-01-10 0:18 [PATCH net-next v2 00/11] selftests: Updates to allow single instance of nettest for client and server David Ahern
` (8 preceding siblings ...)
2021-01-10 0:18 ` [PATCH net-next v2 09/11] selftests: Consistently specify address for MD5 protection David Ahern
@ 2021-01-10 0:18 ` David Ahern
2021-01-10 0:18 ` [PATCH net-next v2 11/11] selftests: Add separate options for server device bindings David Ahern
10 siblings, 0 replies; 14+ messages in thread
From: David Ahern @ 2021-01-10 0:18 UTC (permalink / raw)
To: netdev; +Cc: davem, kuba, schoen, David Ahern
From: David Ahern <dsahern@gmail.com>
Add new option to nettest to specify MD5 password to use for client
side. Update fcnal-test script. This is needed for a single instance
running both server and client modes to test password mismatches.
Signed-off-by: David Ahern <dsahern@gmail.com>
---
tools/testing/selftests/net/fcnal-test.sh | 88 +++++++++++------------
tools/testing/selftests/net/nettest.c | 9 ++-
2 files changed, 52 insertions(+), 45 deletions(-)
diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh
index edd33f83f80e..5d15ded2433b 100755
--- a/tools/testing/selftests/net/fcnal-test.sh
+++ b/tools/testing/selftests/net/fcnal-test.sh
@@ -803,7 +803,7 @@ ipv4_tcp_md5_novrf()
log_start
run_cmd nettest -s -M ${MD5_PW} -m ${NSB_IP} &
sleep 1
- run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW}
+ run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 0 "MD5: Single address config"
# client sends MD5, server not configured
@@ -811,7 +811,7 @@ ipv4_tcp_md5_novrf()
show_hint "Should timeout due to MD5 mismatch"
run_cmd nettest -s &
sleep 1
- run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW}
+ run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 2 "MD5: Server no config, client uses password"
# wrong password
@@ -819,7 +819,7 @@ ipv4_tcp_md5_novrf()
show_hint "Should timeout since client uses wrong password"
run_cmd nettest -s -M ${MD5_PW} -m ${NSB_IP} &
sleep 1
- run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_WRONG_PW}
+ run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: Client uses wrong password"
# client from different address
@@ -827,7 +827,7 @@ ipv4_tcp_md5_novrf()
show_hint "Should timeout due to MD5 mismatch"
run_cmd nettest -s -M ${MD5_PW} -m ${NSB_LO_IP} &
sleep 1
- run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW}
+ run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 2 "MD5: Client address does not match address configured with password"
#
@@ -838,7 +838,7 @@ ipv4_tcp_md5_novrf()
log_start
run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} &
sleep 1
- run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW}
+ run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 0 "MD5: Prefix config"
# client in prefix, wrong password
@@ -846,7 +846,7 @@ ipv4_tcp_md5_novrf()
show_hint "Should timeout since client uses wrong password"
run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} &
sleep 1
- run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_WRONG_PW}
+ run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: Prefix config, client uses wrong password"
# client outside of prefix
@@ -854,7 +854,7 @@ ipv4_tcp_md5_novrf()
show_hint "Should timeout due to MD5 mismatch"
run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} &
sleep 1
- run_cmd_nsb nettest -l ${NSB_LO_IP} -r ${NSA_IP} -M ${MD5_PW}
+ run_cmd_nsb nettest -l ${NSB_LO_IP} -r ${NSA_IP} -X ${MD5_PW}
log_test $? 2 "MD5: Prefix config, client address not in configured prefix"
}
@@ -871,7 +871,7 @@ ipv4_tcp_md5()
log_start
run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
sleep 1
- run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW}
+ run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 0 "MD5: VRF: Single address config"
# client sends MD5, server not configured
@@ -879,7 +879,7 @@ ipv4_tcp_md5()
show_hint "Should timeout since server does not have MD5 auth"
run_cmd nettest -s -d ${VRF} &
sleep 1
- run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW}
+ run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Server no config, client uses password"
# wrong password
@@ -887,7 +887,7 @@ ipv4_tcp_md5()
show_hint "Should timeout since client uses wrong password"
run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
sleep 1
- run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_WRONG_PW}
+ run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: VRF: Client uses wrong password"
# client from different address
@@ -895,7 +895,7 @@ ipv4_tcp_md5()
show_hint "Should timeout since server config differs from client"
run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_LO_IP} &
sleep 1
- run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW}
+ run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Client address does not match address configured with password"
#
@@ -906,7 +906,7 @@ ipv4_tcp_md5()
log_start
run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} &
sleep 1
- run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW}
+ run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 0 "MD5: VRF: Prefix config"
# client in prefix, wrong password
@@ -914,7 +914,7 @@ ipv4_tcp_md5()
show_hint "Should timeout since client uses wrong password"
run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} &
sleep 1
- run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_WRONG_PW}
+ run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: VRF: Prefix config, client uses wrong password"
# client outside of prefix
@@ -922,7 +922,7 @@ ipv4_tcp_md5()
show_hint "Should timeout since client address is outside of prefix"
run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} &
sleep 1
- run_cmd_nsb nettest -l ${NSB_LO_IP} -r ${NSA_IP} -M ${MD5_PW}
+ run_cmd_nsb nettest -l ${NSB_LO_IP} -r ${NSA_IP} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Prefix config, client address not in configured prefix"
#
@@ -933,14 +933,14 @@ ipv4_tcp_md5()
run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} &
sleep 1
- run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW}
+ run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF"
log_start
run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} &
sleep 1
- run_cmd_nsc nettest -r ${NSA_IP} -M ${MD5_WRONG_PW}
+ run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF"
log_start
@@ -948,7 +948,7 @@ ipv4_tcp_md5()
run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} &
sleep 1
- run_cmd_nsc nettest -r ${NSA_IP} -M ${MD5_PW}
+ run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF with VRF pw"
log_start
@@ -956,21 +956,21 @@ ipv4_tcp_md5()
run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} &
sleep 1
- run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_WRONG_PW}
+ run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF with default VRF pw"
log_start
run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} &
run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} &
sleep 1
- run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW}
+ run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 0 "MD5: VRF: Prefix config in default VRF and VRF, conn in VRF"
log_start
run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} &
run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} &
sleep 1
- run_cmd_nsc nettest -r ${NSA_IP} -M ${MD5_WRONG_PW}
+ run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
log_test $? 0 "MD5: VRF: Prefix config in default VRF and VRF, conn in default VRF"
log_start
@@ -978,7 +978,7 @@ ipv4_tcp_md5()
run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} &
run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} &
sleep 1
- run_cmd_nsc nettest -r ${NSA_IP} -M ${MD5_PW}
+ run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Prefix config in default VRF and VRF, conn in default VRF with VRF pw"
log_start
@@ -986,7 +986,7 @@ ipv4_tcp_md5()
run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} &
run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} &
sleep 1
- run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_WRONG_PW}
+ run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: VRF: Prefix config in default VRF and VRF, conn in VRF with default VRF pw"
#
@@ -2267,7 +2267,7 @@ ipv6_tcp_md5_novrf()
log_start
run_cmd nettest -6 -s -M ${MD5_PW} -m ${NSB_IP6} &
sleep 1
- run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 0 "MD5: Single address config"
# client sends MD5, server not configured
@@ -2275,7 +2275,7 @@ ipv6_tcp_md5_novrf()
show_hint "Should timeout due to MD5 mismatch"
run_cmd nettest -6 -s &
sleep 1
- run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 2 "MD5: Server no config, client uses password"
# wrong password
@@ -2283,7 +2283,7 @@ ipv6_tcp_md5_novrf()
show_hint "Should timeout since client uses wrong password"
run_cmd nettest -6 -s -M ${MD5_PW} -m ${NSB_IP6} &
sleep 1
- run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_WRONG_PW}
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: Client uses wrong password"
# client from different address
@@ -2291,7 +2291,7 @@ ipv6_tcp_md5_novrf()
show_hint "Should timeout due to MD5 mismatch"
run_cmd nettest -6 -s -M ${MD5_PW} -m ${NSB_LO_IP6} &
sleep 1
- run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 2 "MD5: Client address does not match address configured with password"
#
@@ -2302,7 +2302,7 @@ ipv6_tcp_md5_novrf()
log_start
run_cmd nettest -6 -s -M ${MD5_PW} -m ${NS_NET6} &
sleep 1
- run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 0 "MD5: Prefix config"
# client in prefix, wrong password
@@ -2310,7 +2310,7 @@ ipv6_tcp_md5_novrf()
show_hint "Should timeout since client uses wrong password"
run_cmd nettest -6 -s -M ${MD5_PW} -m ${NS_NET6} &
sleep 1
- run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_WRONG_PW}
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: Prefix config, client uses wrong password"
# client outside of prefix
@@ -2318,7 +2318,7 @@ ipv6_tcp_md5_novrf()
show_hint "Should timeout due to MD5 mismatch"
run_cmd nettest -6 -s -M ${MD5_PW} -m ${NS_NET6} &
sleep 1
- run_cmd_nsb nettest -6 -l ${NSB_LO_IP6} -r ${NSA_IP6} -M ${MD5_PW}
+ run_cmd_nsb nettest -6 -l ${NSB_LO_IP6} -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 2 "MD5: Prefix config, client address not in configured prefix"
}
@@ -2335,7 +2335,7 @@ ipv6_tcp_md5()
log_start
run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
sleep 1
- run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 0 "MD5: VRF: Single address config"
# client sends MD5, server not configured
@@ -2343,7 +2343,7 @@ ipv6_tcp_md5()
show_hint "Should timeout since server does not have MD5 auth"
run_cmd nettest -6 -s -d ${VRF} &
sleep 1
- run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Server no config, client uses password"
# wrong password
@@ -2351,7 +2351,7 @@ ipv6_tcp_md5()
show_hint "Should timeout since client uses wrong password"
run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
sleep 1
- run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_WRONG_PW}
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: VRF: Client uses wrong password"
# client from different address
@@ -2359,7 +2359,7 @@ ipv6_tcp_md5()
show_hint "Should timeout since server config differs from client"
run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_LO_IP6} &
sleep 1
- run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Client address does not match address configured with password"
#
@@ -2370,7 +2370,7 @@ ipv6_tcp_md5()
log_start
run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
sleep 1
- run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 0 "MD5: VRF: Prefix config"
# client in prefix, wrong password
@@ -2378,7 +2378,7 @@ ipv6_tcp_md5()
show_hint "Should timeout since client uses wrong password"
run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
sleep 1
- run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_WRONG_PW}
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: VRF: Prefix config, client uses wrong password"
# client outside of prefix
@@ -2386,7 +2386,7 @@ ipv6_tcp_md5()
show_hint "Should timeout since client address is outside of prefix"
run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
sleep 1
- run_cmd_nsb nettest -6 -l ${NSB_LO_IP6} -r ${NSA_IP6} -M ${MD5_PW}
+ run_cmd_nsb nettest -6 -l ${NSB_LO_IP6} -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Prefix config, client address not in configured prefix"
#
@@ -2397,14 +2397,14 @@ ipv6_tcp_md5()
run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} &
sleep 1
- run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF"
log_start
run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} &
sleep 1
- run_cmd_nsc nettest -6 -r ${NSA_IP6} -M ${MD5_WRONG_PW}
+ run_cmd_nsc nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF"
log_start
@@ -2412,7 +2412,7 @@ ipv6_tcp_md5()
run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} &
sleep 1
- run_cmd_nsc nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
+ run_cmd_nsc nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF with VRF pw"
log_start
@@ -2420,21 +2420,21 @@ ipv6_tcp_md5()
run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} &
sleep 1
- run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_WRONG_PW}
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF with default VRF pw"
log_start
run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} &
sleep 1
- run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 0 "MD5: VRF: Prefix config in default VRF and VRF, conn in VRF"
log_start
run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} &
sleep 1
- run_cmd_nsc nettest -6 -r ${NSA_IP6} -M ${MD5_WRONG_PW}
+ run_cmd_nsc nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
log_test $? 0 "MD5: VRF: Prefix config in default VRF and VRF, conn in default VRF"
log_start
@@ -2442,7 +2442,7 @@ ipv6_tcp_md5()
run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} &
sleep 1
- run_cmd_nsc nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
+ run_cmd_nsc nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Prefix config in default VRF and VRF, conn in default VRF with VRF pw"
log_start
@@ -2450,7 +2450,7 @@ ipv6_tcp_md5()
run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} &
sleep 1
- run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_WRONG_PW}
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: VRF: Prefix config in default VRF and VRF, conn in VRF with default VRF pw"
#
diff --git a/tools/testing/selftests/net/nettest.c b/tools/testing/selftests/net/nettest.c
index 8a3ddc51883f..a835cab08029 100644
--- a/tools/testing/selftests/net/nettest.c
+++ b/tools/testing/selftests/net/nettest.c
@@ -85,6 +85,7 @@ struct sock_args {
const char *serverns;
const char *password;
+ const char *client_pw;
/* prefix for MD5 password */
const char *md5_prefix_str;
union {
@@ -1653,6 +1654,8 @@ static int do_client(struct sock_args *args)
break;
}
+ args->password = args->client_pw;
+
if (args->has_grp)
sd = msock_client(args);
else
@@ -1761,7 +1764,7 @@ static int ipc_parent(int cpid, int fd, struct sock_args *args)
return client_status;
}
-#define GETOPT_STR "sr:l:p:t:g:P:DRn:M:m:d:BN:O:SCi6L:0:1:2:Fbq"
+#define GETOPT_STR "sr:l:p:t:g:P:DRn:M:X:m:d:BN:O:SCi6L:0:1:2:Fbq"
static void print_usage(char *prog)
{
@@ -1793,6 +1796,7 @@ static void print_usage(char *prog)
" -n num number of times to send message\n"
"\n"
" -M password use MD5 sum protection\n"
+ " -X password MD5 password for client mode\n"
" -m prefix/len prefix and length to use for MD5 key\n"
" -g grp multicast group (e.g., 239.1.1.1)\n"
" -i interactive mode (default is echo and terminate)\n"
@@ -1897,6 +1901,9 @@ int main(int argc, char *argv[])
case 'M':
args.password = optarg;
break;
+ case 'X':
+ args.client_pw = optarg;
+ break;
case 'm':
args.md5_prefix_str = optarg;
break;
--
2.24.3 (Apple Git-128)
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH net-next v2 11/11] selftests: Add separate options for server device bindings
2021-01-10 0:18 [PATCH net-next v2 00/11] selftests: Updates to allow single instance of nettest for client and server David Ahern
` (9 preceding siblings ...)
2021-01-10 0:18 ` [PATCH net-next v2 10/11] selftests: Add new option for client-side passwords David Ahern
@ 2021-01-10 0:18 ` David Ahern
10 siblings, 0 replies; 14+ messages in thread
From: David Ahern @ 2021-01-10 0:18 UTC (permalink / raw)
To: netdev; +Cc: davem, kuba, schoen, David Ahern
From: David Ahern <dsahern@gmail.com>
Add new options to nettest to specify device binding and expected
device binding for server mode, and update fcnal-test script. This
is needed to allow a single instance of nettest running both server
and client modes to use different device bindings.
Signed-off-by: David Ahern <dsahern@gmail.com>
---
tools/testing/selftests/net/fcnal-test.sh | 282 +++++++++++-----------
tools/testing/selftests/net/nettest.c | 14 +-
2 files changed, 154 insertions(+), 142 deletions(-)
diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh
index 5d15ded2433b..2514a9cb9530 100755
--- a/tools/testing/selftests/net/fcnal-test.sh
+++ b/tools/testing/selftests/net/fcnal-test.sh
@@ -869,7 +869,7 @@ ipv4_tcp_md5()
# basic use case
log_start
- run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
sleep 1
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 0 "MD5: VRF: Single address config"
@@ -877,7 +877,7 @@ ipv4_tcp_md5()
# client sends MD5, server not configured
log_start
show_hint "Should timeout since server does not have MD5 auth"
- run_cmd nettest -s -d ${VRF} &
+ run_cmd nettest -s -I ${VRF} &
sleep 1
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Server no config, client uses password"
@@ -885,7 +885,7 @@ ipv4_tcp_md5()
# wrong password
log_start
show_hint "Should timeout since client uses wrong password"
- run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
sleep 1
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: VRF: Client uses wrong password"
@@ -893,7 +893,7 @@ ipv4_tcp_md5()
# client from different address
log_start
show_hint "Should timeout since server config differs from client"
- run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_LO_IP} &
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_LO_IP} &
sleep 1
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Client address does not match address configured with password"
@@ -904,7 +904,7 @@ ipv4_tcp_md5()
# client in prefix
log_start
- run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} &
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} &
sleep 1
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 0 "MD5: VRF: Prefix config"
@@ -912,7 +912,7 @@ ipv4_tcp_md5()
# client in prefix, wrong password
log_start
show_hint "Should timeout since client uses wrong password"
- run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} &
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} &
sleep 1
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: VRF: Prefix config, client uses wrong password"
@@ -920,7 +920,7 @@ ipv4_tcp_md5()
# client outside of prefix
log_start
show_hint "Should timeout since client address is outside of prefix"
- run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} &
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} &
sleep 1
run_cmd_nsb nettest -l ${NSB_LO_IP} -r ${NSA_IP} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Prefix config, client address not in configured prefix"
@@ -930,14 +930,14 @@ ipv4_tcp_md5()
#
log_start
- run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} &
sleep 1
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF"
log_start
- run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} &
sleep 1
run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
@@ -945,7 +945,7 @@ ipv4_tcp_md5()
log_start
show_hint "Should timeout since client in default VRF uses VRF password"
- run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} &
sleep 1
run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_PW}
@@ -953,21 +953,21 @@ ipv4_tcp_md5()
log_start
show_hint "Should timeout since client in VRF uses default VRF password"
- run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} &
sleep 1
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF with default VRF pw"
log_start
- run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} &
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} &
run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} &
sleep 1
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 0 "MD5: VRF: Prefix config in default VRF and VRF, conn in VRF"
log_start
- run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} &
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} &
run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} &
sleep 1
run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
@@ -975,7 +975,7 @@ ipv4_tcp_md5()
log_start
show_hint "Should timeout since client in default VRF uses VRF password"
- run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} &
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} &
run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} &
sleep 1
run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_PW}
@@ -983,7 +983,7 @@ ipv4_tcp_md5()
log_start
show_hint "Should timeout since client in VRF uses default VRF password"
- run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} &
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} &
run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} &
sleep 1
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
@@ -993,11 +993,11 @@ ipv4_tcp_md5()
# negative tests
#
log_start
- run_cmd nettest -s -d ${NSA_DEV} -M ${MD5_PW} -m ${NSB_IP}
+ run_cmd nettest -s -I ${NSA_DEV} -M ${MD5_PW} -m ${NSB_IP}
log_test $? 1 "MD5: VRF: Device must be a VRF - single address"
log_start
- run_cmd nettest -s -d ${NSA_DEV} -M ${MD5_PW} -m ${NS_NET}
+ run_cmd nettest -s -I ${NSA_DEV} -M ${MD5_PW} -m ${NS_NET}
log_test $? 1 "MD5: VRF: Device must be a VRF - prefix"
}
@@ -1020,7 +1020,7 @@ ipv4_tcp_novrf()
a=${NSA_IP}
log_start
- run_cmd nettest -s -d ${NSA_DEV} &
+ run_cmd nettest -s -I ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -r ${a}
log_test_addr ${a} $? 0 "Device server"
@@ -1076,7 +1076,7 @@ ipv4_tcp_novrf()
a=${NSA_IP}
log_start
- run_cmd nettest -s -d ${NSA_DEV} &
+ run_cmd nettest -s -I ${NSA_DEV} &
sleep 1
run_cmd nettest -r ${a} -0 ${a}
log_test_addr ${a} $? 0 "Device server, unbound client, local connection"
@@ -1085,7 +1085,7 @@ ipv4_tcp_novrf()
do
log_start
show_hint "Should fail 'Connection refused' since addresses on loopback are out of device scope"
- run_cmd nettest -s -d ${NSA_DEV} &
+ run_cmd nettest -s -I ${NSA_DEV} &
sleep 1
run_cmd nettest -r ${a}
log_test_addr ${a} $? 1 "Device server, unbound client, local connection"
@@ -1110,7 +1110,7 @@ ipv4_tcp_novrf()
a=${NSA_IP}
log_start
- run_cmd nettest -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+ run_cmd nettest -s -I ${NSA_DEV} -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -d ${NSA_DEV} -r ${a} -0 ${a}
log_test_addr ${a} $? 0 "Device server, device client, local connection"
@@ -1145,13 +1145,13 @@ ipv4_tcp_vrf()
log_test_addr ${a} $? 1 "Global server"
log_start
- run_cmd nettest -s -d ${VRF} -2 ${VRF} &
+ run_cmd nettest -s -I ${VRF} -3 ${VRF} &
sleep 1
run_cmd_nsb nettest -r ${a}
log_test_addr ${a} $? 0 "VRF server"
log_start
- run_cmd nettest -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+ run_cmd nettest -s -I ${NSA_DEV} -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -r ${a}
log_test_addr ${a} $? 0 "Device server"
@@ -1186,14 +1186,14 @@ ipv4_tcp_vrf()
do
log_start
show_hint "client socket should be bound to VRF"
- run_cmd nettest -s -2 ${VRF} &
+ run_cmd nettest -s -3 ${VRF} &
sleep 1
run_cmd_nsb nettest -r ${a}
log_test_addr ${a} $? 0 "Global server"
log_start
show_hint "client socket should be bound to VRF"
- run_cmd nettest -s -d ${VRF} -2 ${VRF} &
+ run_cmd nettest -s -I ${VRF} -3 ${VRF} &
sleep 1
run_cmd_nsb nettest -r ${a}
log_test_addr ${a} $? 0 "VRF server"
@@ -1208,7 +1208,7 @@ ipv4_tcp_vrf()
a=${NSA_IP}
log_start
show_hint "client socket should be bound to device"
- run_cmd nettest -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+ run_cmd nettest -s -I ${NSA_DEV} -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -r ${a}
log_test_addr ${a} $? 0 "Device server"
@@ -1218,7 +1218,7 @@ ipv4_tcp_vrf()
do
log_start
show_hint "Should fail 'Connection refused' since client is not bound to VRF"
- run_cmd nettest -s -d ${VRF} &
+ run_cmd nettest -s -I ${VRF} &
sleep 1
run_cmd nettest -r ${a}
log_test_addr ${a} $? 1 "Global server, local connection"
@@ -1255,7 +1255,7 @@ ipv4_tcp_vrf()
for a in ${NSA_IP} ${VRF_IP} 127.0.0.1
do
log_start
- run_cmd nettest -s -d ${VRF} -2 ${VRF} &
+ run_cmd nettest -s -I ${VRF} -3 ${VRF} &
sleep 1
run_cmd nettest -r ${a} -d ${VRF} -0 ${a}
log_test_addr ${a} $? 0 "VRF server, VRF client, local connection"
@@ -1263,26 +1263,26 @@ ipv4_tcp_vrf()
a=${NSA_IP}
log_start
- run_cmd nettest -s -d ${VRF} -2 ${VRF} &
+ run_cmd nettest -s -I ${VRF} -3 ${VRF} &
sleep 1
run_cmd nettest -r ${a} -d ${NSA_DEV} -0 ${a}
log_test_addr ${a} $? 0 "VRF server, device client, local connection"
log_start
show_hint "Should fail 'No route to host' since client is out of VRF scope"
- run_cmd nettest -s -d ${VRF} &
+ run_cmd nettest -s -I ${VRF} &
sleep 1
run_cmd nettest -r ${a}
log_test_addr ${a} $? 1 "VRF server, unbound client, local connection"
log_start
- run_cmd nettest -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+ run_cmd nettest -s -I ${NSA_DEV} -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -r ${a} -d ${VRF} -0 ${a}
log_test_addr ${a} $? 0 "Device server, VRF client, local connection"
log_start
- run_cmd nettest -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+ run_cmd nettest -s -I ${NSA_DEV} -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -r ${a} -d ${NSA_DEV} -0 ${a}
log_test_addr ${a} $? 0 "Device server, device client, local connection"
@@ -1321,7 +1321,7 @@ ipv4_udp_novrf()
for a in ${NSA_IP} ${NSA_LO_IP}
do
log_start
- run_cmd nettest -D -s -2 ${NSA_DEV} &
+ run_cmd nettest -D -s -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -D -r ${a}
log_test_addr ${a} $? 0 "Global server"
@@ -1334,7 +1334,7 @@ ipv4_udp_novrf()
a=${NSA_IP}
log_start
- run_cmd nettest -D -d ${NSA_DEV} -s -2 ${NSA_DEV} &
+ run_cmd nettest -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -D -r ${a}
log_test_addr ${a} $? 0 "Device server"
@@ -1393,7 +1393,7 @@ ipv4_udp_novrf()
a=${NSA_IP}
log_start
- run_cmd nettest -s -D -d ${NSA_DEV} -2 ${NSA_DEV} &
+ run_cmd nettest -s -D -I ${NSA_DEV} -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -D -r ${a}
log_test_addr ${a} $? 0 "Device server, unbound client, local connection"
@@ -1402,7 +1402,7 @@ ipv4_udp_novrf()
do
log_start
show_hint "Should fail 'Connection refused' since address is out of device scope"
- run_cmd nettest -s -D -d ${NSA_DEV} &
+ run_cmd nettest -s -D -I ${NSA_DEV} &
sleep 1
run_cmd nettest -D -r ${a}
log_test_addr ${a} $? 1 "Device server, unbound client, local connection"
@@ -1456,7 +1456,7 @@ ipv4_udp_novrf()
a=${NSA_IP}
log_start
- run_cmd nettest -D -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+ run_cmd nettest -D -s -I ${NSA_DEV} -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -D -d ${NSA_DEV} -r ${a} -0 ${a}
log_test_addr ${a} $? 0 "Device server, device client, local conn"
@@ -1487,13 +1487,13 @@ ipv4_udp_vrf()
log_test_addr ${a} $? 1 "Global server"
log_start
- run_cmd nettest -D -d ${VRF} -s -2 ${NSA_DEV} &
+ run_cmd nettest -D -I ${VRF} -s -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -D -r ${a}
log_test_addr ${a} $? 0 "VRF server"
log_start
- run_cmd nettest -D -d ${NSA_DEV} -s -2 ${NSA_DEV} &
+ run_cmd nettest -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -D -r ${a}
log_test_addr ${a} $? 0 "Enslaved device server"
@@ -1513,26 +1513,26 @@ ipv4_udp_vrf()
a=${NSA_IP}
log_start
- run_cmd nettest -s -D -d ${VRF} -2 ${NSA_DEV} &
+ run_cmd nettest -s -D -I ${VRF} -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "VRF server, VRF client, local conn"
log_start
- run_cmd nettest -s -D -d ${VRF} -2 ${NSA_DEV} &
+ run_cmd nettest -s -D -I ${VRF} -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -D -d ${NSA_DEV} -r ${a}
log_test_addr ${a} $? 0 "VRF server, enslaved device client, local connection"
a=${NSA_IP}
log_start
- run_cmd nettest -s -D -d ${NSA_DEV} -2 ${NSA_DEV} &
+ run_cmd nettest -s -D -I ${NSA_DEV} -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "Enslaved device server, VRF client, local conn"
log_start
- run_cmd nettest -s -D -d ${NSA_DEV} -2 ${NSA_DEV} &
+ run_cmd nettest -s -D -I ${NSA_DEV} -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -D -d ${NSA_DEV} -r ${a}
log_test_addr ${a} $? 0 "Enslaved device server, device client, local conn"
@@ -1547,19 +1547,19 @@ ipv4_udp_vrf()
for a in ${NSA_IP} ${VRF_IP}
do
log_start
- run_cmd nettest -D -s -2 ${NSA_DEV} &
+ run_cmd nettest -D -s -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -D -r ${a}
log_test_addr ${a} $? 0 "Global server"
log_start
- run_cmd nettest -D -d ${VRF} -s -2 ${NSA_DEV} &
+ run_cmd nettest -D -I ${VRF} -s -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -D -r ${a}
log_test_addr ${a} $? 0 "VRF server"
log_start
- run_cmd nettest -D -d ${NSA_DEV} -s -2 ${NSA_DEV} &
+ run_cmd nettest -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -D -r ${a}
log_test_addr ${a} $? 0 "Enslaved device server"
@@ -1601,31 +1601,31 @@ ipv4_udp_vrf()
#
a=${NSA_IP}
log_start
- run_cmd nettest -D -s -2 ${NSA_DEV} &
+ run_cmd nettest -D -s -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "Global server, VRF client, local conn"
log_start
- run_cmd nettest -s -D -d ${VRF} -2 ${NSA_DEV} &
+ run_cmd nettest -s -D -I ${VRF} -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "VRF server, VRF client, local conn"
log_start
- run_cmd nettest -s -D -d ${VRF} -2 ${NSA_DEV} &
+ run_cmd nettest -s -D -I ${VRF} -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -D -d ${NSA_DEV} -r ${a}
log_test_addr ${a} $? 0 "VRF server, device client, local conn"
log_start
- run_cmd nettest -s -D -d ${NSA_DEV} -2 ${NSA_DEV} &
+ run_cmd nettest -s -D -I ${NSA_DEV} -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "Enslaved device server, VRF client, local conn"
log_start
- run_cmd nettest -s -D -d ${NSA_DEV} -2 ${NSA_DEV} &
+ run_cmd nettest -s -D -I ${NSA_DEV} -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -D -d ${NSA_DEV} -r ${a}
log_test_addr ${a} $? 0 "Enslaved device server, device client, local conn"
@@ -1633,7 +1633,7 @@ ipv4_udp_vrf()
for a in ${VRF_IP} 127.0.0.1
do
log_start
- run_cmd nettest -D -s -2 ${VRF} &
+ run_cmd nettest -D -s -3 ${VRF} &
sleep 1
run_cmd nettest -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "Global server, VRF client, local conn"
@@ -1642,7 +1642,7 @@ ipv4_udp_vrf()
for a in ${VRF_IP} 127.0.0.1
do
log_start
- run_cmd nettest -s -D -d ${VRF} -2 ${VRF} &
+ run_cmd nettest -s -D -I ${VRF} -3 ${VRF} &
sleep 1
run_cmd nettest -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "VRF server, VRF client, local conn"
@@ -1697,7 +1697,7 @@ ipv4_addr_bind_novrf()
log_test_addr ${a} $? 0 "Raw socket bind to local address"
log_start
- run_cmd nettest -s -R -P icmp -l ${a} -d ${NSA_DEV} -b
+ run_cmd nettest -s -R -P icmp -l ${a} -I ${NSA_DEV} -b
log_test_addr ${a} $? 0 "Raw socket bind to local address after device bind"
done
@@ -1720,7 +1720,7 @@ ipv4_addr_bind_novrf()
#a=${NSA_LO_IP}
#log_start
#show_hint "Should fail with 'Cannot assign requested address'"
- #run_cmd nettest -s -l ${a} -d ${NSA_DEV} -t1 -b
+ #run_cmd nettest -s -l ${a} -I ${NSA_DEV} -t1 -b
#log_test_addr ${a} $? 1 "TCP socket bind to out of scope local address"
}
@@ -1736,17 +1736,17 @@ ipv4_addr_bind_vrf()
log_test_addr ${a} $? 0 "Raw socket bind to local address"
log_start
- run_cmd nettest -s -R -P icmp -l ${a} -d ${NSA_DEV} -b
+ run_cmd nettest -s -R -P icmp -l ${a} -I ${NSA_DEV} -b
log_test_addr ${a} $? 0 "Raw socket bind to local address after device bind"
log_start
- run_cmd nettest -s -R -P icmp -l ${a} -d ${VRF} -b
+ run_cmd nettest -s -R -P icmp -l ${a} -I ${VRF} -b
log_test_addr ${a} $? 0 "Raw socket bind to local address after VRF bind"
done
a=${NSA_LO_IP}
log_start
show_hint "Address on loopback is out of VRF scope"
- run_cmd nettest -s -R -P icmp -l ${a} -d ${VRF} -b
+ run_cmd nettest -s -R -P icmp -l ${a} -I ${VRF} -b
log_test_addr ${a} $? 1 "Raw socket bind to out of scope address after VRF bind"
#
@@ -1755,23 +1755,23 @@ ipv4_addr_bind_vrf()
for a in ${NSA_IP} ${VRF_IP}
do
log_start
- run_cmd nettest -s -l ${a} -d ${VRF} -t1 -b
+ run_cmd nettest -s -l ${a} -I ${VRF} -t1 -b
log_test_addr ${a} $? 0 "TCP socket bind to local address"
log_start
- run_cmd nettest -s -l ${a} -d ${NSA_DEV} -t1 -b
+ run_cmd nettest -s -l ${a} -I ${NSA_DEV} -t1 -b
log_test_addr ${a} $? 0 "TCP socket bind to local address after device bind"
done
a=${NSA_LO_IP}
log_start
show_hint "Address on loopback out of scope for VRF"
- run_cmd nettest -s -l ${a} -d ${VRF} -t1 -b
+ run_cmd nettest -s -l ${a} -I ${VRF} -t1 -b
log_test_addr ${a} $? 1 "TCP socket bind to invalid local address for VRF"
log_start
show_hint "Address on loopback out of scope for device in VRF"
- run_cmd nettest -s -l ${a} -d ${NSA_DEV} -t1 -b
+ run_cmd nettest -s -l ${a} -I ${NSA_DEV} -t1 -b
log_test_addr ${a} $? 1 "TCP socket bind to invalid local address for device bind"
}
@@ -1818,7 +1818,7 @@ ipv4_rt()
for a in ${NSA_IP} ${VRF_IP}
do
log_start
- run_cmd nettest ${varg} -s -d ${VRF} &
+ run_cmd nettest ${varg} -s -I ${VRF} &
sleep 1
run_cmd_nsb nettest ${varg} -r ${a} &
sleep 3
@@ -1831,7 +1831,7 @@ ipv4_rt()
a=${NSA_IP}
log_start
- run_cmd nettest ${varg} -s -d ${NSA_DEV} &
+ run_cmd nettest ${varg} -s -I ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest ${varg} -r ${a} &
sleep 3
@@ -1886,7 +1886,7 @@ ipv4_rt()
for a in ${NSA_IP} ${VRF_IP}
do
log_start
- run_cmd nettest ${varg} -d ${VRF} -s &
+ run_cmd nettest ${varg} -I ${VRF} -s &
sleep 1
run_cmd nettest ${varg} -d ${VRF} -r ${a} &
sleep 3
@@ -1910,7 +1910,7 @@ ipv4_rt()
setup ${with_vrf}
log_start
- run_cmd nettest ${varg} -d ${VRF} -s &
+ run_cmd nettest ${varg} -I ${VRF} -s &
sleep 1
run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} &
sleep 3
@@ -1921,7 +1921,7 @@ ipv4_rt()
setup ${with_vrf}
log_start
- run_cmd nettest ${varg} -d ${NSA_DEV} -s &
+ run_cmd nettest ${varg} -I ${NSA_DEV} -s &
sleep 1
run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} &
sleep 3
@@ -2333,7 +2333,7 @@ ipv6_tcp_md5()
# basic use case
log_start
- run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
sleep 1
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 0 "MD5: VRF: Single address config"
@@ -2341,7 +2341,7 @@ ipv6_tcp_md5()
# client sends MD5, server not configured
log_start
show_hint "Should timeout since server does not have MD5 auth"
- run_cmd nettest -6 -s -d ${VRF} &
+ run_cmd nettest -6 -s -I ${VRF} &
sleep 1
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Server no config, client uses password"
@@ -2349,7 +2349,7 @@ ipv6_tcp_md5()
# wrong password
log_start
show_hint "Should timeout since client uses wrong password"
- run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
sleep 1
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: VRF: Client uses wrong password"
@@ -2357,7 +2357,7 @@ ipv6_tcp_md5()
# client from different address
log_start
show_hint "Should timeout since server config differs from client"
- run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_LO_IP6} &
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_LO_IP6} &
sleep 1
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Client address does not match address configured with password"
@@ -2368,7 +2368,7 @@ ipv6_tcp_md5()
# client in prefix
log_start
- run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
sleep 1
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 0 "MD5: VRF: Prefix config"
@@ -2376,7 +2376,7 @@ ipv6_tcp_md5()
# client in prefix, wrong password
log_start
show_hint "Should timeout since client uses wrong password"
- run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
sleep 1
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: VRF: Prefix config, client uses wrong password"
@@ -2384,7 +2384,7 @@ ipv6_tcp_md5()
# client outside of prefix
log_start
show_hint "Should timeout since client address is outside of prefix"
- run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
sleep 1
run_cmd_nsb nettest -6 -l ${NSB_LO_IP6} -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Prefix config, client address not in configured prefix"
@@ -2394,14 +2394,14 @@ ipv6_tcp_md5()
#
log_start
- run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} &
sleep 1
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF"
log_start
- run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} &
sleep 1
run_cmd_nsc nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
@@ -2409,7 +2409,7 @@ ipv6_tcp_md5()
log_start
show_hint "Should timeout since client in default VRF uses VRF password"
- run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} &
sleep 1
run_cmd_nsc nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
@@ -2417,21 +2417,21 @@ ipv6_tcp_md5()
log_start
show_hint "Should timeout since client in VRF uses default VRF password"
- run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} &
sleep 1
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF with default VRF pw"
log_start
- run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} &
sleep 1
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 0 "MD5: VRF: Prefix config in default VRF and VRF, conn in VRF"
log_start
- run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} &
sleep 1
run_cmd_nsc nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
@@ -2439,7 +2439,7 @@ ipv6_tcp_md5()
log_start
show_hint "Should timeout since client in default VRF uses VRF password"
- run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} &
sleep 1
run_cmd_nsc nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
@@ -2447,7 +2447,7 @@ ipv6_tcp_md5()
log_start
show_hint "Should timeout since client in VRF uses default VRF password"
- run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} &
sleep 1
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
@@ -2457,11 +2457,11 @@ ipv6_tcp_md5()
# negative tests
#
log_start
- run_cmd nettest -6 -s -d ${NSA_DEV} -M ${MD5_PW} -m ${NSB_IP6}
+ run_cmd nettest -6 -s -I ${NSA_DEV} -M ${MD5_PW} -m ${NSB_IP6}
log_test $? 1 "MD5: VRF: Device must be a VRF - single address"
log_start
- run_cmd nettest -6 -s -d ${NSA_DEV} -M ${MD5_PW} -m ${NS_NET6}
+ run_cmd nettest -6 -s -I ${NSA_DEV} -M ${MD5_PW} -m ${NS_NET6}
log_test $? 1 "MD5: VRF: Device must be a VRF - prefix"
}
@@ -2534,7 +2534,7 @@ ipv6_tcp_novrf()
a=${NSA_IP6}
log_start
- run_cmd nettest -6 -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+ run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -6 -r ${a} -0 ${a}
log_test_addr ${a} $? 0 "Device server, unbound client, local connection"
@@ -2543,7 +2543,7 @@ ipv6_tcp_novrf()
do
log_start
show_hint "Should fail 'Connection refused' since addresses on loopback are out of device scope"
- run_cmd nettest -6 -s -d ${NSA_DEV} &
+ run_cmd nettest -6 -s -I ${NSA_DEV} &
sleep 1
run_cmd nettest -6 -r ${a}
log_test_addr ${a} $? 1 "Device server, unbound client, local connection"
@@ -2569,7 +2569,7 @@ ipv6_tcp_novrf()
for a in ${NSA_IP6} ${NSA_LINKIP6}
do
log_start
- run_cmd nettest -6 -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+ run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -6 -d ${NSA_DEV} -r ${a}
log_test_addr ${a} $? 0 "Device server, device client, local conn"
@@ -2611,7 +2611,7 @@ ipv6_tcp_vrf()
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest -6 -s -d ${VRF} -2 ${VRF} &
+ run_cmd nettest -6 -s -I ${VRF} -3 ${VRF} &
sleep 1
run_cmd_nsb nettest -6 -r ${a}
log_test_addr ${a} $? 0 "VRF server"
@@ -2620,7 +2620,7 @@ ipv6_tcp_vrf()
# link local is always bound to ingress device
a=${NSA_LINKIP6}%${NSB_DEV}
log_start
- run_cmd nettest -6 -s -d ${VRF} -2 ${NSA_DEV} &
+ run_cmd nettest -6 -s -I ${VRF} -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -6 -r ${a}
log_test_addr ${a} $? 0 "VRF server"
@@ -2628,7 +2628,7 @@ ipv6_tcp_vrf()
for a in ${NSA_IP6} ${VRF_IP6} ${NSA_LINKIP6}%${NSB_DEV}
do
log_start
- run_cmd nettest -6 -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+ run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -6 -r ${a}
log_test_addr ${a} $? 0 "Device server"
@@ -2664,7 +2664,7 @@ ipv6_tcp_vrf()
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest -6 -s -2 ${VRF} &
+ run_cmd nettest -6 -s -3 ${VRF} &
sleep 1
run_cmd_nsb nettest -6 -r ${a}
log_test_addr ${a} $? 0 "Global server"
@@ -2673,7 +2673,7 @@ ipv6_tcp_vrf()
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest -6 -s -d ${VRF} -2 ${VRF} &
+ run_cmd nettest -6 -s -I ${VRF} -3 ${VRF} &
sleep 1
run_cmd_nsb nettest -6 -r ${a}
log_test_addr ${a} $? 0 "VRF server"
@@ -2682,13 +2682,13 @@ ipv6_tcp_vrf()
# For LLA, child socket is bound to device
a=${NSA_LINKIP6}%${NSB_DEV}
log_start
- run_cmd nettest -6 -s -2 ${NSA_DEV} &
+ run_cmd nettest -6 -s -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -6 -r ${a}
log_test_addr ${a} $? 0 "Global server"
log_start
- run_cmd nettest -6 -s -d ${VRF} -2 ${NSA_DEV} &
+ run_cmd nettest -6 -s -I ${VRF} -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -6 -r ${a}
log_test_addr ${a} $? 0 "VRF server"
@@ -2696,7 +2696,7 @@ ipv6_tcp_vrf()
for a in ${NSA_IP6} ${NSA_LINKIP6}%${NSB_DEV}
do
log_start
- run_cmd nettest -6 -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+ run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -6 -r ${a}
log_test_addr ${a} $? 0 "Device server"
@@ -2716,7 +2716,7 @@ ipv6_tcp_vrf()
do
log_start
show_hint "Fails 'Connection refused' since client is not in VRF"
- run_cmd nettest -6 -s -d ${VRF} &
+ run_cmd nettest -6 -s -I ${VRF} &
sleep 1
run_cmd nettest -6 -r ${a}
log_test_addr ${a} $? 1 "Global server, local connection"
@@ -2771,7 +2771,7 @@ ipv6_tcp_vrf()
for a in ${NSA_IP6} ${VRF_IP6} ::1
do
log_start
- run_cmd nettest -6 -s -d ${VRF} -2 ${VRF} &
+ run_cmd nettest -6 -s -I ${VRF} -3 ${VRF} &
sleep 1
run_cmd nettest -6 -r ${a} -d ${VRF} -0 ${a}
log_test_addr ${a} $? 0 "VRF server, VRF client, local connection"
@@ -2779,7 +2779,7 @@ ipv6_tcp_vrf()
a=${NSA_IP6}
log_start
- run_cmd nettest -6 -s -d ${VRF} -2 ${VRF} &
+ run_cmd nettest -6 -s -I ${VRF} -3 ${VRF} &
sleep 1
run_cmd nettest -6 -r ${a} -d ${NSA_DEV} -0 ${a}
log_test_addr ${a} $? 0 "VRF server, device client, local connection"
@@ -2787,13 +2787,13 @@ ipv6_tcp_vrf()
a=${NSA_IP6}
log_start
show_hint "Should fail since unbound client is out of VRF scope"
- run_cmd nettest -6 -s -d ${VRF} &
+ run_cmd nettest -6 -s -I ${VRF} &
sleep 1
run_cmd nettest -6 -r ${a}
log_test_addr ${a} $? 1 "VRF server, unbound client, local connection"
log_start
- run_cmd nettest -6 -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+ run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -6 -r ${a} -d ${VRF} -0 ${a}
log_test_addr ${a} $? 0 "Device server, VRF client, local connection"
@@ -2801,7 +2801,7 @@ ipv6_tcp_vrf()
for a in ${NSA_IP6} ${NSA_LINKIP6}
do
log_start
- run_cmd nettest -6 -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+ run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -6 -r ${a} -d ${NSA_DEV} -0 ${a}
log_test_addr ${a} $? 0 "Device server, device client, local connection"
@@ -2841,13 +2841,13 @@ ipv6_udp_novrf()
for a in ${NSA_IP6} ${NSA_LINKIP6}%${NSB_DEV}
do
log_start
- run_cmd nettest -6 -D -s -2 ${NSA_DEV} &
+ run_cmd nettest -6 -D -s -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -6 -D -r ${a}
log_test_addr ${a} $? 0 "Global server"
log_start
- run_cmd nettest -6 -D -d ${NSA_DEV} -s -2 ${NSA_DEV} &
+ run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -6 -D -r ${a}
log_test_addr ${a} $? 0 "Device server"
@@ -2855,7 +2855,7 @@ ipv6_udp_novrf()
a=${NSA_LO_IP6}
log_start
- run_cmd nettest -6 -D -s -2 ${NSA_DEV} &
+ run_cmd nettest -6 -D -s -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -6 -D -r ${a}
log_test_addr ${a} $? 0 "Global server"
@@ -2865,7 +2865,7 @@ ipv6_udp_novrf()
# behavior.
#log_start
#show_hint "Should fail since loopback address is out of scope"
- #run_cmd nettest -6 -D -d ${NSA_DEV} -s -2 ${NSA_DEV} &
+ #run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
#sleep 1
#run_cmd_nsb nettest -6 -D -r ${a}
#log_test_addr ${a} $? 1 "Device server"
@@ -2933,7 +2933,7 @@ ipv6_udp_novrf()
a=${NSA_IP6}
log_start
- run_cmd nettest -6 -s -D -d ${NSA_DEV} -2 ${NSA_DEV} &
+ run_cmd nettest -6 -s -D -I ${NSA_DEV} -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -6 -D -r ${a}
log_test_addr ${a} $? 0 "Device server, unbound client, local connection"
@@ -2942,7 +2942,7 @@ ipv6_udp_novrf()
do
log_start
show_hint "Should fail 'Connection refused' since address is out of device scope"
- run_cmd nettest -6 -s -D -d ${NSA_DEV} &
+ run_cmd nettest -6 -s -D -I ${NSA_DEV} &
sleep 1
run_cmd nettest -6 -D -r ${a}
log_test_addr ${a} $? 1 "Device server, local connection"
@@ -2993,7 +2993,7 @@ ipv6_udp_novrf()
a=${NSA_IP6}
log_start
- run_cmd nettest -6 -D -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+ run_cmd nettest -6 -D -s -I ${NSA_DEV} -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a} -0 ${a}
log_test_addr ${a} $? 0 "Device server, device client, local conn"
@@ -3040,7 +3040,7 @@ ipv6_udp_vrf()
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest -6 -D -d ${VRF} -s -2 ${NSA_DEV} &
+ run_cmd nettest -6 -D -I ${VRF} -s -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -6 -D -r ${a}
log_test_addr ${a} $? 0 "VRF server"
@@ -3049,7 +3049,7 @@ ipv6_udp_vrf()
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest -6 -D -d ${NSA_DEV} -s -2 ${NSA_DEV} &
+ run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -6 -D -r ${a}
log_test_addr ${a} $? 0 "Enslaved device server"
@@ -3080,7 +3080,7 @@ ipv6_udp_vrf()
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest -6 -D -d ${VRF} -s &
+ run_cmd nettest -6 -D -I ${VRF} -s &
sleep 1
run_cmd nettest -6 -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "VRF server, VRF client, local conn"
@@ -3095,19 +3095,19 @@ ipv6_udp_vrf()
log_test_addr ${a} $? 1 "Global server, device client, local conn"
log_start
- run_cmd nettest -6 -D -d ${VRF} -s -2 ${NSA_DEV} &
+ run_cmd nettest -6 -D -I ${VRF} -s -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a}
log_test_addr ${a} $? 0 "VRF server, device client, local conn"
log_start
- run_cmd nettest -6 -D -d ${NSA_DEV} -s -2 ${NSA_DEV} &
+ run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -6 -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "Enslaved device server, VRF client, local conn"
log_start
- run_cmd nettest -6 -D -d ${NSA_DEV} -s -2 ${NSA_DEV} &
+ run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a}
log_test_addr ${a} $? 0 "Enslaved device server, device client, local conn"
@@ -3122,7 +3122,7 @@ ipv6_udp_vrf()
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest -6 -D -s -2 ${NSA_DEV} &
+ run_cmd nettest -6 -D -s -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -6 -D -r ${a}
log_test_addr ${a} $? 0 "Global server"
@@ -3131,7 +3131,7 @@ ipv6_udp_vrf()
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest -6 -D -d ${VRF} -s -2 ${NSA_DEV} &
+ run_cmd nettest -6 -D -I ${VRF} -s -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -6 -D -r ${a}
log_test_addr ${a} $? 0 "VRF server"
@@ -3140,7 +3140,7 @@ ipv6_udp_vrf()
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest -6 -D -d ${NSA_DEV} -s -2 ${NSA_DEV} &
+ run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -6 -D -r ${a}
log_test_addr ${a} $? 0 "Enslaved device server"
@@ -3184,13 +3184,13 @@ ipv6_udp_vrf()
#
a=${NSA_IP6}
log_start
- run_cmd nettest -6 -D -s -2 ${NSA_DEV} &
+ run_cmd nettest -6 -D -s -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -6 -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "Global server, VRF client, local conn"
#log_start
- run_cmd nettest -6 -D -d ${VRF} -s -2 ${NSA_DEV} &
+ run_cmd nettest -6 -D -I ${VRF} -s -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -6 -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "VRF server, VRF client, local conn"
@@ -3198,13 +3198,13 @@ ipv6_udp_vrf()
a=${VRF_IP6}
log_start
- run_cmd nettest -6 -D -s -2 ${VRF} &
+ run_cmd nettest -6 -D -s -3 ${VRF} &
sleep 1
run_cmd nettest -6 -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "Global server, VRF client, local conn"
log_start
- run_cmd nettest -6 -D -d ${VRF} -s -2 ${VRF} &
+ run_cmd nettest -6 -D -I ${VRF} -s -3 ${VRF} &
sleep 1
run_cmd nettest -6 -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "VRF server, VRF client, local conn"
@@ -3220,25 +3220,25 @@ ipv6_udp_vrf()
# device to global IP
a=${NSA_IP6}
log_start
- run_cmd nettest -6 -D -s -2 ${NSA_DEV} &
+ run_cmd nettest -6 -D -s -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a}
log_test_addr ${a} $? 0 "Global server, device client, local conn"
log_start
- run_cmd nettest -6 -D -d ${VRF} -s -2 ${NSA_DEV} &
+ run_cmd nettest -6 -D -I ${VRF} -s -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a}
log_test_addr ${a} $? 0 "VRF server, device client, local conn"
log_start
- run_cmd nettest -6 -D -d ${NSA_DEV} -s -2 ${NSA_DEV} &
+ run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -6 -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "Device server, VRF client, local conn"
log_start
- run_cmd nettest -6 -D -d ${NSA_DEV} -s -2 ${NSA_DEV} &
+ run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a}
log_test_addr ${a} $? 0 "Device server, device client, local conn"
@@ -3332,7 +3332,7 @@ ipv6_addr_bind_novrf()
log_test_addr ${a} $? 0 "Raw socket bind to local address"
log_start
- run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -d ${NSA_DEV} -b
+ run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -I ${NSA_DEV} -b
log_test_addr ${a} $? 0 "Raw socket bind to local address after device bind"
done
@@ -3345,13 +3345,13 @@ ipv6_addr_bind_novrf()
log_test_addr ${a} $? 0 "TCP socket bind to local address"
log_start
- run_cmd nettest -6 -s -l ${a} -d ${NSA_DEV} -t1 -b
+ run_cmd nettest -6 -s -l ${a} -I ${NSA_DEV} -t1 -b
log_test_addr ${a} $? 0 "TCP socket bind to local address after device bind"
a=${NSA_LO_IP6}
log_start
show_hint "Should fail with 'Cannot assign requested address'"
- run_cmd nettest -6 -s -l ${a} -d ${NSA_DEV} -t1 -b
+ run_cmd nettest -6 -s -l ${a} -I ${NSA_DEV} -t1 -b
log_test_addr ${a} $? 1 "TCP socket bind to out of scope local address"
}
@@ -3363,18 +3363,18 @@ ipv6_addr_bind_vrf()
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -d ${VRF} -b
+ run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -I ${VRF} -b
log_test_addr ${a} $? 0 "Raw socket bind to local address after vrf bind"
log_start
- run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -d ${NSA_DEV} -b
+ run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -I ${NSA_DEV} -b
log_test_addr ${a} $? 0 "Raw socket bind to local address after device bind"
done
a=${NSA_LO_IP6}
log_start
show_hint "Address on loopback is out of VRF scope"
- run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -d ${VRF} -b
+ run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -I ${VRF} -b
log_test_addr ${a} $? 1 "Raw socket bind to invalid local address after vrf bind"
#
@@ -3384,29 +3384,29 @@ ipv6_addr_bind_vrf()
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest -6 -s -l ${a} -d ${VRF} -t1 -b
+ run_cmd nettest -6 -s -l ${a} -I ${VRF} -t1 -b
log_test_addr ${a} $? 0 "TCP socket bind to local address with VRF bind"
done
a=${NSA_IP6}
log_start
- run_cmd nettest -6 -s -l ${a} -d ${NSA_DEV} -t1 -b
+ run_cmd nettest -6 -s -l ${a} -I ${NSA_DEV} -t1 -b
log_test_addr ${a} $? 0 "TCP socket bind to local address with device bind"
a=${VRF_IP6}
log_start
- run_cmd nettest -6 -s -l ${a} -d ${NSA_DEV} -t1 -b
+ run_cmd nettest -6 -s -l ${a} -I ${NSA_DEV} -t1 -b
log_test_addr ${a} $? 1 "TCP socket bind to VRF address with device bind"
a=${NSA_LO_IP6}
log_start
show_hint "Address on loopback out of scope for VRF"
- run_cmd nettest -6 -s -l ${a} -d ${VRF} -t1 -b
+ run_cmd nettest -6 -s -l ${a} -I ${VRF} -t1 -b
log_test_addr ${a} $? 1 "TCP socket bind to invalid local address for VRF"
log_start
show_hint "Address on loopback out of scope for device in VRF"
- run_cmd nettest -6 -s -l ${a} -d ${NSA_DEV} -t1 -b
+ run_cmd nettest -6 -s -l ${a} -I ${NSA_DEV} -t1 -b
log_test_addr ${a} $? 1 "TCP socket bind to invalid local address for device bind"
}
@@ -3454,7 +3454,7 @@ ipv6_rt()
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest ${varg} -d ${VRF} -s &
+ run_cmd nettest ${varg} -I ${VRF} -s &
sleep 1
run_cmd_nsb nettest ${varg} -r ${a} &
sleep 3
@@ -3468,7 +3468,7 @@ ipv6_rt()
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest ${varg} -d ${NSA_DEV} -s &
+ run_cmd nettest ${varg} -I ${NSA_DEV} -s &
sleep 1
run_cmd_nsb nettest ${varg} -r ${a} &
sleep 3
@@ -3525,7 +3525,7 @@ ipv6_rt()
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest ${varg} -d ${VRF} -s &
+ run_cmd nettest ${varg} -I ${VRF} -s &
sleep 1
run_cmd nettest ${varg} -d ${VRF} -r ${a} &
sleep 3
@@ -3549,7 +3549,7 @@ ipv6_rt()
setup ${with_vrf}
log_start
- run_cmd nettest ${varg} -d ${VRF} -s &
+ run_cmd nettest ${varg} -I ${VRF} -s &
sleep 1
run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} &
sleep 3
@@ -3560,7 +3560,7 @@ ipv6_rt()
setup ${with_vrf}
log_start
- run_cmd nettest ${varg} -d ${NSA_DEV} -s &
+ run_cmd nettest ${varg} -I ${NSA_DEV} -s &
sleep 1
run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} &
sleep 3
diff --git a/tools/testing/selftests/net/nettest.c b/tools/testing/selftests/net/nettest.c
index a835cab08029..8822ca4f1baf 100644
--- a/tools/testing/selftests/net/nettest.c
+++ b/tools/testing/selftests/net/nettest.c
@@ -79,6 +79,7 @@ struct sock_args {
int use_setsockopt;
int use_cmsg;
const char *dev;
+ const char *server_dev;
int ifindex;
const char *clientns;
@@ -96,6 +97,7 @@ struct sock_args {
/* expected addresses and device index for connection */
const char *expected_dev;
+ const char *expected_server_dev;
int expected_ifindex;
/* local address */
@@ -1424,6 +1426,8 @@ static int do_server(struct sock_args *args, int ipc_fd)
log_msg("Switched server netns\n");
}
+ args->dev = args->server_dev;
+ args->expected_dev = args->expected_server_dev;
if (resolve_devices(args) || validate_addresses(args))
goto err_exit;
@@ -1764,7 +1768,7 @@ static int ipc_parent(int cpid, int fd, struct sock_args *args)
return client_status;
}
-#define GETOPT_STR "sr:l:p:t:g:P:DRn:M:X:m:d:BN:O:SCi6L:0:1:2:Fbq"
+#define GETOPT_STR "sr:l:p:t:g:P:DRn:M:X:m:d:I:BN:O:SCi6L:0:1:2:3:Fbq"
static void print_usage(char *prog)
{
@@ -1788,6 +1792,7 @@ static void print_usage(char *prog)
" -l addr local address to bind to\n"
"\n"
" -d dev bind socket to given device name\n"
+ " -I dev bind socket to given device name - server mode\n"
" -S use setsockopt (IP_UNICAST_IF or IP_MULTICAST_IF)\n"
" to set device binding\n"
" -C use cmsg and IP_PKTINFO to specify device binding\n"
@@ -1804,6 +1809,7 @@ static void print_usage(char *prog)
" -0 addr Expected local address\n"
" -1 addr Expected remote address\n"
" -2 dev Expected device name (or index) to receive packet\n"
+ " -3 dev Expected device name (or index) to receive packets - server mode\n"
"\n"
" -b Bind test only.\n"
" -q Be quiet. Run test without printing anything.\n"
@@ -1916,6 +1922,9 @@ int main(int argc, char *argv[])
case 'd':
args.dev = optarg;
break;
+ case 'I':
+ args.server_dev = optarg;
+ break;
case 'i':
interactive = 1;
break;
@@ -1942,6 +1951,9 @@ int main(int argc, char *argv[])
case '2':
args.expected_dev = optarg;
break;
+ case '3':
+ args.expected_server_dev = optarg;
+ break;
case 'q':
quiet = 1;
break;
--
2.24.3 (Apple Git-128)
^ permalink raw reply related [flat|nested] 14+ messages in thread