From: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
To: isaacm@codeaurora.org
Cc: will@kernel.org, pdaly@codeaurora.org, robin.murphy@arm.com,
linux-kernel@vger.kernel.org, iommu@lists.linux-foundation.org,
pratikp@codeaurora.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 0/5] Optimize iommu_map_sg() performance
Date: Mon, 11 Jan 2021 11:52:59 +0530 [thread overview]
Message-ID: <20210111062300.28541-1-saiprakash.ranjan@codeaurora.org> (raw)
In-Reply-To: <1610157031-26301-1-git-send-email-isaacm@codeaurora.org>
Hi Isaac,
On 2021-01-09 07:20, Isaac J. Manjarres wrote:
> The iommu_map_sg() code currently iterates through the given
> scatter-gather list, and in the worst case, invokes iommu_map()
> for each element in the scatter-gather list, which calls into
> the IOMMU driver through an indirect call. For an IOMMU driver
> that uses a format supported by the io-pgtable code, the IOMMU
> driver will then call into the io-pgtable code to map the chunk.
>
> Jumping between the IOMMU core code, the IOMMU driver, and the
> io-pgtable code and back for each element in a scatter-gather list
> is not efficient.
>
> Instead, add a map_sg() hook in both the IOMMU driver ops and the
> io-pgtable ops. iommu_map_sg() can then call into the IOMMU driver's
> map_sg() hook with the entire scatter-gather list, which can call
> into the io-pgtable map_sg() hook, which can process the entire
> scatter-gather list, signficantly reducing the number of indirect
> calls, and jumps between these layers, boosting performance.
>
> On a system that uses the ARM SMMU driver, and the ARM LPAE format,
> the current implementation of iommu_map_sg() yields the following
> latencies for mapping scatter-gather lists of various sizes. These
> latencies are calculated by repeating the mapping operation 10 times:
>
> size iommu_map_sg latency
> 4K 0.624 us
> 64K 9.468 us
> 1M 122.557 us
> 2M 239.807 us
> 12M 1435.979 us
> 24M 2884.968 us
> 32M 3832.979 us
>
> On the same system, the proposed modifications yield the following
> results:
>
> size iommu_map_sg latency
> 4K 3.645 us
> 64K 4.198 us
> 1M 11.010 us
> 2M 17.125 us
> 12M 82.416 us
> 24M 158.677 us
> 32M 210.468 us
>
> The procedure for collecting the iommu_map_sg latencies is
> the same in both experiments. Clearly, reducing the jumps
> between the different layers in the IOMMU code offers a
> signficant performance boost in iommu_map_sg() latency.
>
I gave this series a go on chromebook and saw these warnings
and several device probe failures, logs attached below:
WARN corresponds to this code in arm_lpae_map_by_pgsize()
if (WARN_ON(iaext || (paddr + size) >> cfg->oas))
return -ERANGE;
Logs:
[ 2.411391] ------------[ cut here ]------------
[ 2.416149] WARNING: CPU: 6 PID: 56 at drivers/iommu/io-pgtable-arm.c:492 arm_lpae_map_sg+0x234/0x248
[ 2.425606] Modules linked in:
[ 2.428749] CPU: 6 PID: 56 Comm: kworker/6:1 Not tainted 5.10.5 #970
[ 2.440287] Workqueue: events deferred_probe_work_func
[ 2.445563] pstate: 20c00009 (nzCv daif +PAN +UAO -TCO BTYPE=--)
[ 2.451726] pc : arm_lpae_map_sg+0x234/0x248
[ 2.456112] lr : arm_lpae_map_sg+0xe0/0x248
[ 2.460410] sp : ffffffc010513750
[ 2.463820] x29: ffffffc010513790 x28: ffffffb943332000
[ 2.469281] x27: 0000000ffffff000 x26: ffffffb943d14900
[ 2.474738] x25: 0000000000001000 x24: 0000000103465000
[ 2.480196] x23: 0000000000000001 x22: 0000000103466000
[ 2.485645] x21: 0000000000000003 x20: 0000000000000a20
[ 2.491103] x19: ffffffc010513850 x18: 0000000000000001
[ 2.496562] x17: 0000000000000002 x16: 00000000ffffffff
[ 2.502021] x15: 0000000000000000 x14: 0000000000000000
[ 2.507479] x13: 0000000000000001 x12: 0000000000000000
[ 2.512928] x11: 0000001000000000 x10: 0000000000000000
[ 2.518385] x9 : 0000000000000001 x8 : 0000000040201000
[ 2.523844] x7 : 0000000000000a20 x6 : ffffffb943463000
[ 2.529302] x5 : 0000000000000003 x4 : 0000000000001000
[ 2.534760] x3 : 0000000000000001 x2 : ffffffb941f605a0
[ 2.540219] x1 : 0000000000000003 x0 : 0000000000000e40
[ 2.545679] Call trace:
[ 2.548196] arm_lpae_map_sg+0x234/0x248
[ 2.552225] arm_smmu_map_sg+0x80/0xc4
[ 2.556078] __iommu_map_sg+0x6c/0x188
[ 2.559931] iommu_map_sg_atomic+0x18/0x20
[ 2.564144] iommu_dma_alloc_remap+0x26c/0x34c
[ 2.568703] iommu_dma_alloc+0x9c/0x268
[ 2.572647] dma_alloc_attrs+0x88/0xfc
[ 2.576503] gsi_ring_alloc+0x50/0x144
[ 2.580356] gsi_init+0x2c4/0x5c4
[ 2.583766] ipa_probe+0x14c/0x2b4
[ 2.587263] platform_drv_probe+0x94/0xb4
[ 2.591377] really_probe+0x138/0x348
[ 2.595145] driver_probe_device+0x80/0xb8
[ 2.599358] __device_attach_driver+0x90/0xa8
[ 2.603829] bus_for_each_drv+0x84/0xcc
[ 2.607772] __device_attach+0xc0/0x148
[ 2.611713] device_initial_probe+0x18/0x20
[ 2.616012] bus_probe_device+0x38/0x94
[ 2.619953] deferred_probe_work_func+0x78/0xb0
[ 2.624611] process_one_work+0x210/0x3dc
[ 2.628726] worker_thread+0x284/0x3e0
[ 2.632578] kthread+0x148/0x1a8
[ 2.635891] ret_from_fork+0x10/0x18
[ 2.639562] ---[ end trace 9bac18cad6a9862e ]---
[ 2.644414] ipa 1e40000.ipa: error -12 allocating channel 0 event ring
[ 2.651656] ipa: probe of 1e40000.ipa failed with error -12
[ 2.660072] dwc3 a600000.dwc3: Adding to iommu group 8
[ 2.668632] xhci-hcd xhci-hcd.13.auto: xHCI Host Controller
[ 2.674680] xhci-hcd xhci-hcd.13.auto: new USB bus registered, assigned bus number 1
[ 2.683638] ------------[ cut here ]------------
[ 2.688391] WARNING: CPU: 6 PID: 56 at drivers/iommu/io-pgtable-arm.c:492 arm_lpae_map_sg+0x234/0x248
[ 2.697846] Modules linked in:
[ 2.700988] CPU: 6 PID: 56 Comm: kworker/6:1 Tainted: G W 5.10.5 #970
[ 2.713954] Workqueue: events deferred_probe_work_func
[ 2.719228] pstate: 20c00009 (nzCv daif +PAN +UAO -TCO BTYPE=--)
[ 2.725390] pc : arm_lpae_map_sg+0x234/0x248
[ 2.729775] lr : arm_lpae_map_sg+0xe0/0x248
[ 2.734073] sp : ffffffc010512e20
[ 2.737483] x29: ffffffc010512e60 x28: ffffffb94345e000
[ 2.742942] x27: 0000000ffffff000 x26: ffffffb941fa1500
[ 2.748400] x25: 0000000000001000 x24: 0000000103468000
[ 2.753858] x23: 0000000000000001 x22: 0000000103469000
[ 2.759318] x21: 0000000000000003 x20: 0000000000000a20
[ 2.764777] x19: ffffffc010512f20 x18: 0000000000000001
[ 2.770235] x17: 0000000000000001 x16: 00000000ffffffff
[ 2.775694] x15: 0000000000000000 x14: 0000000000000001
[ 2.781154] x13: 0000000000000001 x12: 0000000000000000
[ 2.786613] x11: 0000001000000000 x10: 0000000000000000
[ 2.792071] x9 : 0000000000000001 x8 : 0000000040201000
[ 2.797529] x7 : 0000000000000000 x6 : ffffffc010512f20
[ 2.802988] x5 : 0000000000000a20 x4 : 0000000000001000
[ 2.808438] x3 : 0000000000000001 x2 : ffffffb9457d6100
[ 2.813896] x1 : 0000000000000003 x0 : 0000000000000e40
[ 2.819356] Call trace:
[ 2.821878] arm_lpae_map_sg+0x234/0x248
[ 2.825907] arm_smmu_map_sg+0x80/0xc4
[ 2.829761] __iommu_map_sg+0x6c/0x188
[ 2.833615] iommu_map_sg_atomic+0x18/0x20
[ 2.837827] iommu_dma_alloc_remap+0x26c/0x34c
[ 2.842386] iommu_dma_alloc+0x9c/0x268
[ 2.846329] dma_alloc_attrs+0x88/0xfc
[ 2.850184] xhci_mem_init+0x200/0x930
[ 2.854037] xhci_init+0xc0/0xec
[ 2.857350] xhci_gen_setup+0x270/0x348
[ 2.861292] xhci_plat_setup+0x4c/0x58
[ 2.865146] usb_add_hcd+0x288/0x430
[ 2.868815] xhci_plat_probe+0x3f8/0x568
[ 2.872844] platform_drv_probe+0x94/0xb4
[ 2.876957] really_probe+0x138/0x348
[ 2.880725] driver_probe_device+0x80/0xb8
[ 2.884936] __device_attach_driver+0x90/0xa8
[ 2.889407] bus_for_each_drv+0x84/0xcc
[ 2.893348] __device_attach+0xc0/0x148
[ 2.897289] device_initial_probe+0x18/0x20
[ 2.901587] bus_probe_device+0x38/0x94
[ 2.905529] device_add+0x214/0x3c4
[ 2.909112] platform_device_add+0x198/0x208
[ 2.913497] dwc3_host_init+0x228/0x2bc
[ 2.917437] dwc3_core_init_mode+0xfc/0x18c
[ 2.921735] dwc3_probe+0x978/0xac8
[ 2.925318] platform_drv_probe+0x94/0xb4
[ 2.929432] really_probe+0x138/0x348
[ 2.933200] driver_probe_device+0x80/0xb8
[ 2.937411] __device_attach_driver+0x90/0xa8
[ 2.941881] bus_for_each_drv+0x84/0xcc
[ 2.945823] __device_attach+0xc0/0x148
[ 2.949765] device_initial_probe+0x18/0x20
[ 2.954064] bus_probe_device+0x38/0x94
[ 2.958005] device_add+0x214/0x3c4
[ 2.961590] of_device_add+0x3c/0x48
[ 2.965260] of_platform_device_create_pdata+0xac/0xec
[ 2.970535] of_platform_bus_create+0x1cc/0x348
[ 2.975191] of_platform_populate+0x78/0xc8
[ 2.979490] dwc3_qcom_probe+0x4e0/0xa88
[ 2.983518] platform_drv_probe+0x94/0xb4
[ 2.987632] really_probe+0x138/0x348
[ 2.991400] driver_probe_device+0x80/0xb8
[ 2.995612] __device_attach_driver+0x90/0xa8
[ 3.000084] bus_for_each_drv+0x84/0xcc
[ 3.004025] __device_attach+0xc0/0x148
[ 3.007966] device_initial_probe+0x18/0x20
[ 3.012264] bus_probe_device+0x38/0x94
[ 3.016206] deferred_probe_work_func+0x78/0xb0
[ 3.020864] process_one_work+0x210/0x3dc
[ 3.024979] worker_thread+0x284/0x3e0
[ 3.028833] kthread+0x148/0x1a8
[ 3.032147] ret_from_fork+0x10/0x18
[ 3.035817] ---[ end trace 9bac18cad6a9862f ]---
[ 3.041583] xhci-hcd xhci-hcd.13.auto: can't setup: -12
[ 3.046950] xhci-hcd xhci-hcd.13.auto: USB bus 1 deregistered
[ 3.053107] xhci-hcd: probe of xhci-hcd.13.auto failed with error -12
[ 3.062208] coresight etm0: CPU0: ETM v4.2 initialized
[ 3.063345] sdhci_msm 7c4000.sdhci: TCXO clk not present (-2)
[ 3.067862] coresight etm1: CPU1: ETM v4.2 initialized
[ 3.078829] ------------[ cut here ]------------
[ 3.079076] coresight etm2: CPU2: ETM v4.2 initialized
[ 3.083587] WARNING: CPU: 5 PID: 7 at drivers/iommu/io-pgtable-arm.c:492 arm_lpae_map_sg+0x234/0x248
[ 3.083589] Modules linked in:
[ 3.089200] coresight etm3: CPU3: ETM v4.2 initialized
[ 3.098235]
[ 3.098241] CPU: 5 PID: 7 Comm: kworker/u16:0 Tainted: G W 5.10.5 #970
[ 3.101722] coresight etm4: CPU4: ETM v4.2 initialized
[ 3.106672] Workqueue: events_unbound async_run_entry_fn
[ 3.131984] pstate: 20c00009 (nzCv daif +PAN +UAO -TCO BTYPE=--)
[ 3.138161] pc : arm_lpae_map_sg+0x234/0x248
[ 3.142557] lr : arm_lpae_map_sg+0xe0/0x248
[ 3.146864] sp : ffffffc0100c3800
[ 3.150272] x29: ffffffc0100c3840 x28: ffffffb942394000
[ 3.155736] x27: 0000000ffffff000 x26: ffffffb944010100
[ 3.161198] x25: 0000000000001000 x24: 0000000102326000
[ 3.166660] x23: 0000000000000001 x22: 0000000102327000
[ 3.172122] x21: 0000000000000003 x20: 0000000000000a20
[ 3.177586] x19: ffffffc0100c3900 x18: 0000000000000001
[ 3.183048] x17: 0000000000000001 x16: 00000000ffffffff
[ 3.188512] x15: 0000000000000000 x14: 0000000000000001
[ 3.193973] x13: 0000000000000001 x12: 0000000000000000
[ 3.199434] x11: 0000001000000000 x10: 0000000000000000
[ 3.204895] x9 : 0000000000000001 x8 : 0000000040201000
[ 3.210356] x7 : 0000000000000000 x6 : ffffffc0100c3900
[ 3.215818] x5 : 0000000000000a20 x4 : 0000000000001000
[ 3.221279] x3 : 0000000000000001 x2 : ffffffb94581a100
[ 3.226741] x1 : 0000000000000003 x0 : 0000000000000e40
[ 3.232203] Call trace:
[ 3.234722] arm_lpae_map_sg+0x234/0x248
[ 3.238761] arm_smmu_map_sg+0x80/0xc4
[ 3.242615] __iommu_map_sg+0x6c/0x188
[ 3.246468] iommu_map_sg_atomic+0x18/0x20
[ 3.250680] iommu_dma_alloc_remap+0x26c/0x34c
[ 3.255250] iommu_dma_alloc+0x9c/0x268
[ 3.259204] dma_alloc_attrs+0x88/0xfc
[ 3.263058] sdhci_setup_host+0x250/0xc8c
[ 3.267185] sdhci_msm_cqe_add_host+0x38/0x188
[ 3.271756] sdhci_msm_probe+0x540/0x628
[ 3.275795] platform_drv_probe+0x94/0xb4
[ 3.279921] really_probe+0x138/0x348
[ 3.283687] driver_probe_device+0x80/0xb8
[ 3.287899] __device_attach_driver+0x90/0xa8
[ 3.292381] bus_for_each_drv+0x84/0xcc
[ 3.296332] __device_attach_async_helper+0x80/0xd4
[ 3.301347] async_run_entry_fn+0x4c/0x100
[ 3.305559] process_one_work+0x210/0x3dc
[ 3.309684] worker_thread+0x234/0x3e0
[ 3.313537] kthread+0x148/0x1a8
[ 3.316861] ret_from_fork+0x10/0x18
[ 3.320541] ---[ end trace 9bac18cad6a98630 ]---
[ 3.325372] mmc1: Unable to allocate ADMA buffers - falling back to standard DMA
<snip>...
[ 3.587535] mmc1: running CQE recovery
[ 3.591419] mmc1: Got command interrupt 0x00010001 even though no command operation was in progress.
[ 3.600796] mmc1: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 3.607417] mmc1: sdhci: Sys addr: 0x00000000 | Version: 0x00007202
[ 3.614038] mmc1: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000108
Thanks,
Sai
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
WARNING: multiple messages have this Message-ID (diff)
From: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
To: isaacm@codeaurora.org
Cc: iommu@lists.linux-foundation.org, joro@8bytes.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, pdaly@codeaurora.org,
pratikp@codeaurora.org, robin.murphy@arm.com, will@kernel.org,
Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Subject: Re: [PATCH 0/5] Optimize iommu_map_sg() performance
Date: Mon, 11 Jan 2021 11:52:59 +0530 [thread overview]
Message-ID: <20210111062300.28541-1-saiprakash.ranjan@codeaurora.org> (raw)
In-Reply-To: <1610157031-26301-1-git-send-email-isaacm@codeaurora.org>
Hi Isaac,
On 2021-01-09 07:20, Isaac J. Manjarres wrote:
> The iommu_map_sg() code currently iterates through the given
> scatter-gather list, and in the worst case, invokes iommu_map()
> for each element in the scatter-gather list, which calls into
> the IOMMU driver through an indirect call. For an IOMMU driver
> that uses a format supported by the io-pgtable code, the IOMMU
> driver will then call into the io-pgtable code to map the chunk.
>
> Jumping between the IOMMU core code, the IOMMU driver, and the
> io-pgtable code and back for each element in a scatter-gather list
> is not efficient.
>
> Instead, add a map_sg() hook in both the IOMMU driver ops and the
> io-pgtable ops. iommu_map_sg() can then call into the IOMMU driver's
> map_sg() hook with the entire scatter-gather list, which can call
> into the io-pgtable map_sg() hook, which can process the entire
> scatter-gather list, signficantly reducing the number of indirect
> calls, and jumps between these layers, boosting performance.
>
> On a system that uses the ARM SMMU driver, and the ARM LPAE format,
> the current implementation of iommu_map_sg() yields the following
> latencies for mapping scatter-gather lists of various sizes. These
> latencies are calculated by repeating the mapping operation 10 times:
>
> size iommu_map_sg latency
> 4K 0.624 us
> 64K 9.468 us
> 1M 122.557 us
> 2M 239.807 us
> 12M 1435.979 us
> 24M 2884.968 us
> 32M 3832.979 us
>
> On the same system, the proposed modifications yield the following
> results:
>
> size iommu_map_sg latency
> 4K 3.645 us
> 64K 4.198 us
> 1M 11.010 us
> 2M 17.125 us
> 12M 82.416 us
> 24M 158.677 us
> 32M 210.468 us
>
> The procedure for collecting the iommu_map_sg latencies is
> the same in both experiments. Clearly, reducing the jumps
> between the different layers in the IOMMU code offers a
> signficant performance boost in iommu_map_sg() latency.
>
I gave this series a go on chromebook and saw these warnings
and several device probe failures, logs attached below:
WARN corresponds to this code in arm_lpae_map_by_pgsize()
if (WARN_ON(iaext || (paddr + size) >> cfg->oas))
return -ERANGE;
Logs:
[ 2.411391] ------------[ cut here ]------------
[ 2.416149] WARNING: CPU: 6 PID: 56 at drivers/iommu/io-pgtable-arm.c:492 arm_lpae_map_sg+0x234/0x248
[ 2.425606] Modules linked in:
[ 2.428749] CPU: 6 PID: 56 Comm: kworker/6:1 Not tainted 5.10.5 #970
[ 2.440287] Workqueue: events deferred_probe_work_func
[ 2.445563] pstate: 20c00009 (nzCv daif +PAN +UAO -TCO BTYPE=--)
[ 2.451726] pc : arm_lpae_map_sg+0x234/0x248
[ 2.456112] lr : arm_lpae_map_sg+0xe0/0x248
[ 2.460410] sp : ffffffc010513750
[ 2.463820] x29: ffffffc010513790 x28: ffffffb943332000
[ 2.469281] x27: 0000000ffffff000 x26: ffffffb943d14900
[ 2.474738] x25: 0000000000001000 x24: 0000000103465000
[ 2.480196] x23: 0000000000000001 x22: 0000000103466000
[ 2.485645] x21: 0000000000000003 x20: 0000000000000a20
[ 2.491103] x19: ffffffc010513850 x18: 0000000000000001
[ 2.496562] x17: 0000000000000002 x16: 00000000ffffffff
[ 2.502021] x15: 0000000000000000 x14: 0000000000000000
[ 2.507479] x13: 0000000000000001 x12: 0000000000000000
[ 2.512928] x11: 0000001000000000 x10: 0000000000000000
[ 2.518385] x9 : 0000000000000001 x8 : 0000000040201000
[ 2.523844] x7 : 0000000000000a20 x6 : ffffffb943463000
[ 2.529302] x5 : 0000000000000003 x4 : 0000000000001000
[ 2.534760] x3 : 0000000000000001 x2 : ffffffb941f605a0
[ 2.540219] x1 : 0000000000000003 x0 : 0000000000000e40
[ 2.545679] Call trace:
[ 2.548196] arm_lpae_map_sg+0x234/0x248
[ 2.552225] arm_smmu_map_sg+0x80/0xc4
[ 2.556078] __iommu_map_sg+0x6c/0x188
[ 2.559931] iommu_map_sg_atomic+0x18/0x20
[ 2.564144] iommu_dma_alloc_remap+0x26c/0x34c
[ 2.568703] iommu_dma_alloc+0x9c/0x268
[ 2.572647] dma_alloc_attrs+0x88/0xfc
[ 2.576503] gsi_ring_alloc+0x50/0x144
[ 2.580356] gsi_init+0x2c4/0x5c4
[ 2.583766] ipa_probe+0x14c/0x2b4
[ 2.587263] platform_drv_probe+0x94/0xb4
[ 2.591377] really_probe+0x138/0x348
[ 2.595145] driver_probe_device+0x80/0xb8
[ 2.599358] __device_attach_driver+0x90/0xa8
[ 2.603829] bus_for_each_drv+0x84/0xcc
[ 2.607772] __device_attach+0xc0/0x148
[ 2.611713] device_initial_probe+0x18/0x20
[ 2.616012] bus_probe_device+0x38/0x94
[ 2.619953] deferred_probe_work_func+0x78/0xb0
[ 2.624611] process_one_work+0x210/0x3dc
[ 2.628726] worker_thread+0x284/0x3e0
[ 2.632578] kthread+0x148/0x1a8
[ 2.635891] ret_from_fork+0x10/0x18
[ 2.639562] ---[ end trace 9bac18cad6a9862e ]---
[ 2.644414] ipa 1e40000.ipa: error -12 allocating channel 0 event ring
[ 2.651656] ipa: probe of 1e40000.ipa failed with error -12
[ 2.660072] dwc3 a600000.dwc3: Adding to iommu group 8
[ 2.668632] xhci-hcd xhci-hcd.13.auto: xHCI Host Controller
[ 2.674680] xhci-hcd xhci-hcd.13.auto: new USB bus registered, assigned bus number 1
[ 2.683638] ------------[ cut here ]------------
[ 2.688391] WARNING: CPU: 6 PID: 56 at drivers/iommu/io-pgtable-arm.c:492 arm_lpae_map_sg+0x234/0x248
[ 2.697846] Modules linked in:
[ 2.700988] CPU: 6 PID: 56 Comm: kworker/6:1 Tainted: G W 5.10.5 #970
[ 2.713954] Workqueue: events deferred_probe_work_func
[ 2.719228] pstate: 20c00009 (nzCv daif +PAN +UAO -TCO BTYPE=--)
[ 2.725390] pc : arm_lpae_map_sg+0x234/0x248
[ 2.729775] lr : arm_lpae_map_sg+0xe0/0x248
[ 2.734073] sp : ffffffc010512e20
[ 2.737483] x29: ffffffc010512e60 x28: ffffffb94345e000
[ 2.742942] x27: 0000000ffffff000 x26: ffffffb941fa1500
[ 2.748400] x25: 0000000000001000 x24: 0000000103468000
[ 2.753858] x23: 0000000000000001 x22: 0000000103469000
[ 2.759318] x21: 0000000000000003 x20: 0000000000000a20
[ 2.764777] x19: ffffffc010512f20 x18: 0000000000000001
[ 2.770235] x17: 0000000000000001 x16: 00000000ffffffff
[ 2.775694] x15: 0000000000000000 x14: 0000000000000001
[ 2.781154] x13: 0000000000000001 x12: 0000000000000000
[ 2.786613] x11: 0000001000000000 x10: 0000000000000000
[ 2.792071] x9 : 0000000000000001 x8 : 0000000040201000
[ 2.797529] x7 : 0000000000000000 x6 : ffffffc010512f20
[ 2.802988] x5 : 0000000000000a20 x4 : 0000000000001000
[ 2.808438] x3 : 0000000000000001 x2 : ffffffb9457d6100
[ 2.813896] x1 : 0000000000000003 x0 : 0000000000000e40
[ 2.819356] Call trace:
[ 2.821878] arm_lpae_map_sg+0x234/0x248
[ 2.825907] arm_smmu_map_sg+0x80/0xc4
[ 2.829761] __iommu_map_sg+0x6c/0x188
[ 2.833615] iommu_map_sg_atomic+0x18/0x20
[ 2.837827] iommu_dma_alloc_remap+0x26c/0x34c
[ 2.842386] iommu_dma_alloc+0x9c/0x268
[ 2.846329] dma_alloc_attrs+0x88/0xfc
[ 2.850184] xhci_mem_init+0x200/0x930
[ 2.854037] xhci_init+0xc0/0xec
[ 2.857350] xhci_gen_setup+0x270/0x348
[ 2.861292] xhci_plat_setup+0x4c/0x58
[ 2.865146] usb_add_hcd+0x288/0x430
[ 2.868815] xhci_plat_probe+0x3f8/0x568
[ 2.872844] platform_drv_probe+0x94/0xb4
[ 2.876957] really_probe+0x138/0x348
[ 2.880725] driver_probe_device+0x80/0xb8
[ 2.884936] __device_attach_driver+0x90/0xa8
[ 2.889407] bus_for_each_drv+0x84/0xcc
[ 2.893348] __device_attach+0xc0/0x148
[ 2.897289] device_initial_probe+0x18/0x20
[ 2.901587] bus_probe_device+0x38/0x94
[ 2.905529] device_add+0x214/0x3c4
[ 2.909112] platform_device_add+0x198/0x208
[ 2.913497] dwc3_host_init+0x228/0x2bc
[ 2.917437] dwc3_core_init_mode+0xfc/0x18c
[ 2.921735] dwc3_probe+0x978/0xac8
[ 2.925318] platform_drv_probe+0x94/0xb4
[ 2.929432] really_probe+0x138/0x348
[ 2.933200] driver_probe_device+0x80/0xb8
[ 2.937411] __device_attach_driver+0x90/0xa8
[ 2.941881] bus_for_each_drv+0x84/0xcc
[ 2.945823] __device_attach+0xc0/0x148
[ 2.949765] device_initial_probe+0x18/0x20
[ 2.954064] bus_probe_device+0x38/0x94
[ 2.958005] device_add+0x214/0x3c4
[ 2.961590] of_device_add+0x3c/0x48
[ 2.965260] of_platform_device_create_pdata+0xac/0xec
[ 2.970535] of_platform_bus_create+0x1cc/0x348
[ 2.975191] of_platform_populate+0x78/0xc8
[ 2.979490] dwc3_qcom_probe+0x4e0/0xa88
[ 2.983518] platform_drv_probe+0x94/0xb4
[ 2.987632] really_probe+0x138/0x348
[ 2.991400] driver_probe_device+0x80/0xb8
[ 2.995612] __device_attach_driver+0x90/0xa8
[ 3.000084] bus_for_each_drv+0x84/0xcc
[ 3.004025] __device_attach+0xc0/0x148
[ 3.007966] device_initial_probe+0x18/0x20
[ 3.012264] bus_probe_device+0x38/0x94
[ 3.016206] deferred_probe_work_func+0x78/0xb0
[ 3.020864] process_one_work+0x210/0x3dc
[ 3.024979] worker_thread+0x284/0x3e0
[ 3.028833] kthread+0x148/0x1a8
[ 3.032147] ret_from_fork+0x10/0x18
[ 3.035817] ---[ end trace 9bac18cad6a9862f ]---
[ 3.041583] xhci-hcd xhci-hcd.13.auto: can't setup: -12
[ 3.046950] xhci-hcd xhci-hcd.13.auto: USB bus 1 deregistered
[ 3.053107] xhci-hcd: probe of xhci-hcd.13.auto failed with error -12
[ 3.062208] coresight etm0: CPU0: ETM v4.2 initialized
[ 3.063345] sdhci_msm 7c4000.sdhci: TCXO clk not present (-2)
[ 3.067862] coresight etm1: CPU1: ETM v4.2 initialized
[ 3.078829] ------------[ cut here ]------------
[ 3.079076] coresight etm2: CPU2: ETM v4.2 initialized
[ 3.083587] WARNING: CPU: 5 PID: 7 at drivers/iommu/io-pgtable-arm.c:492 arm_lpae_map_sg+0x234/0x248
[ 3.083589] Modules linked in:
[ 3.089200] coresight etm3: CPU3: ETM v4.2 initialized
[ 3.098235]
[ 3.098241] CPU: 5 PID: 7 Comm: kworker/u16:0 Tainted: G W 5.10.5 #970
[ 3.101722] coresight etm4: CPU4: ETM v4.2 initialized
[ 3.106672] Workqueue: events_unbound async_run_entry_fn
[ 3.131984] pstate: 20c00009 (nzCv daif +PAN +UAO -TCO BTYPE=--)
[ 3.138161] pc : arm_lpae_map_sg+0x234/0x248
[ 3.142557] lr : arm_lpae_map_sg+0xe0/0x248
[ 3.146864] sp : ffffffc0100c3800
[ 3.150272] x29: ffffffc0100c3840 x28: ffffffb942394000
[ 3.155736] x27: 0000000ffffff000 x26: ffffffb944010100
[ 3.161198] x25: 0000000000001000 x24: 0000000102326000
[ 3.166660] x23: 0000000000000001 x22: 0000000102327000
[ 3.172122] x21: 0000000000000003 x20: 0000000000000a20
[ 3.177586] x19: ffffffc0100c3900 x18: 0000000000000001
[ 3.183048] x17: 0000000000000001 x16: 00000000ffffffff
[ 3.188512] x15: 0000000000000000 x14: 0000000000000001
[ 3.193973] x13: 0000000000000001 x12: 0000000000000000
[ 3.199434] x11: 0000001000000000 x10: 0000000000000000
[ 3.204895] x9 : 0000000000000001 x8 : 0000000040201000
[ 3.210356] x7 : 0000000000000000 x6 : ffffffc0100c3900
[ 3.215818] x5 : 0000000000000a20 x4 : 0000000000001000
[ 3.221279] x3 : 0000000000000001 x2 : ffffffb94581a100
[ 3.226741] x1 : 0000000000000003 x0 : 0000000000000e40
[ 3.232203] Call trace:
[ 3.234722] arm_lpae_map_sg+0x234/0x248
[ 3.238761] arm_smmu_map_sg+0x80/0xc4
[ 3.242615] __iommu_map_sg+0x6c/0x188
[ 3.246468] iommu_map_sg_atomic+0x18/0x20
[ 3.250680] iommu_dma_alloc_remap+0x26c/0x34c
[ 3.255250] iommu_dma_alloc+0x9c/0x268
[ 3.259204] dma_alloc_attrs+0x88/0xfc
[ 3.263058] sdhci_setup_host+0x250/0xc8c
[ 3.267185] sdhci_msm_cqe_add_host+0x38/0x188
[ 3.271756] sdhci_msm_probe+0x540/0x628
[ 3.275795] platform_drv_probe+0x94/0xb4
[ 3.279921] really_probe+0x138/0x348
[ 3.283687] driver_probe_device+0x80/0xb8
[ 3.287899] __device_attach_driver+0x90/0xa8
[ 3.292381] bus_for_each_drv+0x84/0xcc
[ 3.296332] __device_attach_async_helper+0x80/0xd4
[ 3.301347] async_run_entry_fn+0x4c/0x100
[ 3.305559] process_one_work+0x210/0x3dc
[ 3.309684] worker_thread+0x234/0x3e0
[ 3.313537] kthread+0x148/0x1a8
[ 3.316861] ret_from_fork+0x10/0x18
[ 3.320541] ---[ end trace 9bac18cad6a98630 ]---
[ 3.325372] mmc1: Unable to allocate ADMA buffers - falling back to standard DMA
<snip>...
[ 3.587535] mmc1: running CQE recovery
[ 3.591419] mmc1: Got command interrupt 0x00010001 even though no command operation was in progress.
[ 3.600796] mmc1: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 3.607417] mmc1: sdhci: Sys addr: 0x00000000 | Version: 0x00007202
[ 3.614038] mmc1: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000108
Thanks,
Sai
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2021-01-11 6:23 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-09 1:50 [PATCH 0/5] Optimize iommu_map_sg() performance Isaac J. Manjarres
2021-01-09 1:50 ` Isaac J. Manjarres
2021-01-09 1:50 ` [PATCH 1/5] iommu/io-pgtable: Introduce map_sg() as a page table op Isaac J. Manjarres
2021-01-09 1:50 ` Isaac J. Manjarres
2021-01-09 1:50 ` [PATCH 2/5] iommu/io-pgtable-arm: Hook up map_sg() Isaac J. Manjarres
2021-01-09 1:50 ` Isaac J. Manjarres
2021-01-09 1:50 ` [PATCH 3/5] iommu/io-pgtable-arm-v7s: " Isaac J. Manjarres
2021-01-09 1:50 ` Isaac J. Manjarres
2021-01-09 1:50 ` [PATCH 4/5] iommu: Introduce map_sg() as an IOMMU op for IOMMU drivers Isaac J. Manjarres
2021-01-09 1:50 ` Isaac J. Manjarres
2021-01-09 1:50 ` [PATCH 5/5] iommu/arm-smmu: Hook up map_sg() Isaac J. Manjarres
2021-01-09 1:50 ` Isaac J. Manjarres
2021-01-11 6:22 ` Sai Prakash Ranjan [this message]
2021-01-11 6:22 ` [PATCH 0/5] Optimize iommu_map_sg() performance Sai Prakash Ranjan
2021-01-11 7:52 ` Sai Prakash Ranjan
2021-01-11 7:52 ` Sai Prakash Ranjan
2021-01-11 15:12 ` isaacm
2021-01-11 15:12 ` isaacm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210111062300.28541-1-saiprakash.ranjan@codeaurora.org \
--to=saiprakash.ranjan@codeaurora.org \
--cc=iommu@lists.linux-foundation.org \
--cc=isaacm@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pdaly@codeaurora.org \
--cc=pratikp@codeaurora.org \
--cc=robin.murphy@arm.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.