All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: peng.fan@nxp.com
Cc: ohad@wizery.com, bjorn.andersson@linaro.org,
	o.rempel@pengutronix.de, shawnguo@kernel.org,
	s.hauer@pengutronix.de, kernel@pengutronix.de,
	festevam@gmail.com, linux-imx@nxp.com,
	linux-remoteproc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, paul@crapouillou.net,
	matthias.bgg@gmail.com, agross@kernel.org,
	patrice.chotard@st.com, Richard Zhu <hongxing.zhu@nxp.com>
Subject: Re: [PATCH V5 6/8] remoteproc: imx_rproc: support i.MX8MQ/M
Date: Mon, 11 Jan 2021 14:40:16 -0700	[thread overview]
Message-ID: <20210111214016.GI144935@xps15> (raw)
In-Reply-To: <20201229033019.25899-7-peng.fan@nxp.com>

On Tue, Dec 29, 2020 at 11:30:17AM +0800, peng.fan@nxp.com wrote:
> From: Peng Fan <peng.fan@nxp.com>
> 
> Add i.MX8MQ dev/sys addr map and configuration data structure
> i.MX8MM share i.MX8MQ settings.
> 
> Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
> ---
>  drivers/remoteproc/imx_rproc.c | 39 ++++++++++++++++++++++++++++++++++
>  1 file changed, 39 insertions(+)
> 
> diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
> index 3c0075dc1787..f80428afb8a7 100644
> --- a/drivers/remoteproc/imx_rproc.c
> +++ b/drivers/remoteproc/imx_rproc.c
> @@ -88,6 +88,34 @@ struct imx_rproc {
>  	struct clk			*clk;
>  };
>  
> +static const struct imx_rproc_att imx_rproc_att_imx8mq[] = {
> +	/* dev addr , sys addr  , size	    , flags */
> +	/* TCML - alias */
> +	{ 0x00000000, 0x007e0000, 0x00020000, 0 },
> +	/* OCRAM_S */
> +	{ 0x00180000, 0x00180000, 0x00008000, 0 },
> +	/* OCRAM */
> +	{ 0x00900000, 0x00900000, 0x00020000, 0 },
> +	/* OCRAM */
> +	{ 0x00920000, 0x00920000, 0x00020000, 0 },
> +	/* QSPI Code - alias */
> +	{ 0x08000000, 0x08000000, 0x08000000, 0 },
> +	/* DDR (Code) - alias */
> +	{ 0x10000000, 0x80000000, 0x0FFE0000, 0 },
> +	/* TCML */
> +	{ 0x1FFE0000, 0x007E0000, 0x00020000, ATT_OWN },
> +	/* TCMU */
> +	{ 0x20000000, 0x00800000, 0x00020000, ATT_OWN },
> +	/* OCRAM_S */
> +	{ 0x20180000, 0x00180000, 0x00008000, ATT_OWN },
> +	/* OCRAM */
> +	{ 0x20200000, 0x00900000, 0x00020000, ATT_OWN },
> +	/* OCRAM */
> +	{ 0x20220000, 0x00920000, 0x00020000, ATT_OWN },
> +	/* DDR (Data) */
> +	{ 0x40000000, 0x40000000, 0x80000000, 0 },
> +};
> +
>  static const struct imx_rproc_att imx_rproc_att_imx7d[] = {
>  	/* dev addr , sys addr  , size	    , flags */
>  	/* OCRAM_S (M4 Boot code) - alias */
> @@ -138,6 +166,15 @@ static const struct imx_rproc_att imx_rproc_att_imx6sx[] = {
>  	{ 0x80000000, 0x80000000, 0x60000000, 0 },
>  };
>  
> +static const struct imx_rproc_dcfg imx_rproc_cfg_imx8mq = {
> +	.src_reg	= IMX7D_SRC_SCR,
> +	.src_mask	= IMX7D_M4_RST_MASK,
> +	.src_start	= IMX7D_M4_START,
> +	.src_stop	= IMX7D_M4_STOP,
> +	.att		= imx_rproc_att_imx8mq,
> +	.att_size	= ARRAY_SIZE(imx_rproc_att_imx8mq),
> +};
> +
>  static const struct imx_rproc_dcfg imx_rproc_cfg_imx7d = {
>  	.src_reg	= IMX7D_SRC_SCR,
>  	.src_mask	= IMX7D_M4_RST_MASK,
> @@ -496,6 +533,8 @@ static int imx_rproc_remove(struct platform_device *pdev)
>  static const struct of_device_id imx_rproc_of_match[] = {
>  	{ .compatible = "fsl,imx7d-cm4", .data = &imx_rproc_cfg_imx7d },
>  	{ .compatible = "fsl,imx6sx-cm4", .data = &imx_rproc_cfg_imx6sx },
> +	{ .compatible = "fsl,imx8mq-cm4", .data = &imx_rproc_cfg_imx8mq },
> +	{ .compatible = "fsl,imx8mm-cm4", .data = &imx_rproc_cfg_imx8mq },

I don't see a patch that adds those to the imx-rproc.txt bindings document.  As far
as I can tell the patch that does that was part of your first patchset [1] but
was not resubmitted after that.

It would be very nice to have an example of how the DT is laid out for those 2
platform, otherwise I have to guess based on the code I am reviewing.

[1]. https://patchwork.kernel.org/project/linux-remoteproc/patch/20200724080813.24884-2-peng.fan@nxp.com/

>  	{},
>  };
>  MODULE_DEVICE_TABLE(of, imx_rproc_of_match);
> -- 
> 2.28.0
> 

WARNING: multiple messages have this Message-ID (diff)
From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: peng.fan@nxp.com
Cc: ohad@wizery.com, Richard Zhu <hongxing.zhu@nxp.com>,
	patrice.chotard@st.com, festevam@gmail.com,
	s.hauer@pengutronix.de, linux-remoteproc@vger.kernel.org,
	linux-kernel@vger.kernel.org, bjorn.andersson@linaro.org,
	paul@crapouillou.net, o.rempel@pengutronix.de, agross@kernel.org,
	linux-imx@nxp.com, kernel@pengutronix.de, matthias.bgg@gmail.com,
	shawnguo@kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH V5 6/8] remoteproc: imx_rproc: support i.MX8MQ/M
Date: Mon, 11 Jan 2021 14:40:16 -0700	[thread overview]
Message-ID: <20210111214016.GI144935@xps15> (raw)
In-Reply-To: <20201229033019.25899-7-peng.fan@nxp.com>

On Tue, Dec 29, 2020 at 11:30:17AM +0800, peng.fan@nxp.com wrote:
> From: Peng Fan <peng.fan@nxp.com>
> 
> Add i.MX8MQ dev/sys addr map and configuration data structure
> i.MX8MM share i.MX8MQ settings.
> 
> Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
> ---
>  drivers/remoteproc/imx_rproc.c | 39 ++++++++++++++++++++++++++++++++++
>  1 file changed, 39 insertions(+)
> 
> diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
> index 3c0075dc1787..f80428afb8a7 100644
> --- a/drivers/remoteproc/imx_rproc.c
> +++ b/drivers/remoteproc/imx_rproc.c
> @@ -88,6 +88,34 @@ struct imx_rproc {
>  	struct clk			*clk;
>  };
>  
> +static const struct imx_rproc_att imx_rproc_att_imx8mq[] = {
> +	/* dev addr , sys addr  , size	    , flags */
> +	/* TCML - alias */
> +	{ 0x00000000, 0x007e0000, 0x00020000, 0 },
> +	/* OCRAM_S */
> +	{ 0x00180000, 0x00180000, 0x00008000, 0 },
> +	/* OCRAM */
> +	{ 0x00900000, 0x00900000, 0x00020000, 0 },
> +	/* OCRAM */
> +	{ 0x00920000, 0x00920000, 0x00020000, 0 },
> +	/* QSPI Code - alias */
> +	{ 0x08000000, 0x08000000, 0x08000000, 0 },
> +	/* DDR (Code) - alias */
> +	{ 0x10000000, 0x80000000, 0x0FFE0000, 0 },
> +	/* TCML */
> +	{ 0x1FFE0000, 0x007E0000, 0x00020000, ATT_OWN },
> +	/* TCMU */
> +	{ 0x20000000, 0x00800000, 0x00020000, ATT_OWN },
> +	/* OCRAM_S */
> +	{ 0x20180000, 0x00180000, 0x00008000, ATT_OWN },
> +	/* OCRAM */
> +	{ 0x20200000, 0x00900000, 0x00020000, ATT_OWN },
> +	/* OCRAM */
> +	{ 0x20220000, 0x00920000, 0x00020000, ATT_OWN },
> +	/* DDR (Data) */
> +	{ 0x40000000, 0x40000000, 0x80000000, 0 },
> +};
> +
>  static const struct imx_rproc_att imx_rproc_att_imx7d[] = {
>  	/* dev addr , sys addr  , size	    , flags */
>  	/* OCRAM_S (M4 Boot code) - alias */
> @@ -138,6 +166,15 @@ static const struct imx_rproc_att imx_rproc_att_imx6sx[] = {
>  	{ 0x80000000, 0x80000000, 0x60000000, 0 },
>  };
>  
> +static const struct imx_rproc_dcfg imx_rproc_cfg_imx8mq = {
> +	.src_reg	= IMX7D_SRC_SCR,
> +	.src_mask	= IMX7D_M4_RST_MASK,
> +	.src_start	= IMX7D_M4_START,
> +	.src_stop	= IMX7D_M4_STOP,
> +	.att		= imx_rproc_att_imx8mq,
> +	.att_size	= ARRAY_SIZE(imx_rproc_att_imx8mq),
> +};
> +
>  static const struct imx_rproc_dcfg imx_rproc_cfg_imx7d = {
>  	.src_reg	= IMX7D_SRC_SCR,
>  	.src_mask	= IMX7D_M4_RST_MASK,
> @@ -496,6 +533,8 @@ static int imx_rproc_remove(struct platform_device *pdev)
>  static const struct of_device_id imx_rproc_of_match[] = {
>  	{ .compatible = "fsl,imx7d-cm4", .data = &imx_rproc_cfg_imx7d },
>  	{ .compatible = "fsl,imx6sx-cm4", .data = &imx_rproc_cfg_imx6sx },
> +	{ .compatible = "fsl,imx8mq-cm4", .data = &imx_rproc_cfg_imx8mq },
> +	{ .compatible = "fsl,imx8mm-cm4", .data = &imx_rproc_cfg_imx8mq },

I don't see a patch that adds those to the imx-rproc.txt bindings document.  As far
as I can tell the patch that does that was part of your first patchset [1] but
was not resubmitted after that.

It would be very nice to have an example of how the DT is laid out for those 2
platform, otherwise I have to guess based on the code I am reviewing.

[1]. https://patchwork.kernel.org/project/linux-remoteproc/patch/20200724080813.24884-2-peng.fan@nxp.com/

>  	{},
>  };
>  MODULE_DEVICE_TABLE(of, imx_rproc_of_match);
> -- 
> 2.28.0
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2021-01-11 21:41 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-29  3:30 [PATCH V5 0/8] remoteproc: imx_rproc: support iMX8MQ/M peng.fan
2020-12-29  3:30 ` peng.fan
2020-12-29  3:30 ` [PATCH V5 1/8] remoteproc: introduce is_iomem to rproc_mem_entry peng.fan
2020-12-29  3:30   ` peng.fan
2021-01-11 18:53   ` Mathieu Poirier
2021-01-11 18:53     ` Mathieu Poirier
2020-12-29  3:30 ` [PATCH V5 2/8] remoteproc: add is_iomem to da_to_va peng.fan
2020-12-29  3:30   ` peng.fan
2020-12-30 15:14   ` kernel test robot
2020-12-30 15:14     ` kernel test robot
2020-12-30 15:20   ` kernel test robot
2020-12-30 15:20     ` kernel test robot
2021-01-11 20:25   ` Mathieu Poirier
2021-01-11 20:25     ` Mathieu Poirier
2020-12-29  3:30 ` [PATCH V5 3/8] remoteproc: imx_rproc: correct err message peng.fan
2020-12-29  3:30   ` peng.fan
2021-01-11 20:35   ` Mathieu Poirier
2021-01-11 20:35     ` Mathieu Poirier
2021-01-11 20:44   ` Mathieu Poirier
2021-01-11 20:44     ` Mathieu Poirier
2020-12-29  3:30 ` [PATCH V5 4/8] remoteproc: imx_rproc: use devm_ioremap peng.fan
2020-12-29  3:30   ` peng.fan
2021-01-11 20:46   ` Mathieu Poirier
2021-01-11 20:46     ` Mathieu Poirier
2020-12-29  3:30 ` [PATCH V5 5/8] remoteproc: imx_rproc: add i.MX specific parse fw hook peng.fan
2020-12-29  3:30   ` peng.fan
2020-12-29  3:30 ` [PATCH V5 6/8] remoteproc: imx_rproc: support i.MX8MQ/M peng.fan
2020-12-29  3:30   ` peng.fan
2021-01-11 21:40   ` Mathieu Poirier [this message]
2021-01-11 21:40     ` Mathieu Poirier
2020-12-29  3:30 ` [PATCH V5 7/8] remoteproc: imx_rproc: ignore mapping vdev regions peng.fan
2020-12-29  3:30   ` peng.fan
2021-01-11 21:50   ` Mathieu Poirier
2021-01-11 21:50     ` Mathieu Poirier
2021-01-12  9:41     ` Peng Fan
2021-01-12  9:41       ` Peng Fan
2021-01-12 18:46       ` Mathieu Poirier
2021-01-12 18:46         ` Mathieu Poirier
2021-01-13  2:19         ` Peng Fan
2021-01-13  2:19           ` Peng Fan
2021-01-13 16:17           ` Mathieu Poirier
2021-01-13 16:17             ` Mathieu Poirier
2021-01-14  9:52             ` Peng Fan
2021-01-14  9:52               ` Peng Fan
2021-01-14 17:10               ` Mathieu Poirier
2021-01-14 17:10                 ` Mathieu Poirier
2021-01-15  3:29                 ` Peng Fan
2021-01-15  3:29                   ` Peng Fan
2020-12-29  3:30 ` [PATCH V5 8/8] remoteproc: imx_proc: enable virtio/mailbox peng.fan
2020-12-29  3:30   ` peng.fan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210111214016.GI144935@xps15 \
    --to=mathieu.poirier@linaro.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=festevam@gmail.com \
    --cc=hongxing.zhu@nxp.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=matthias.bgg@gmail.com \
    --cc=o.rempel@pengutronix.de \
    --cc=ohad@wizery.com \
    --cc=patrice.chotard@st.com \
    --cc=paul@crapouillou.net \
    --cc=peng.fan@nxp.com \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.