Re: [PATCH v11 1/7] dt-bindings: soc: mediatek: add mtk svs dt-bindings

[Rob Herring <robh@kernel.org>]

On Thu, Jan 07, 2021 at 10:43:50AM +0800, Roger Lu wrote:
> Document the binding for enabling mtk svs on MediaTek SoC.
> 
> Signed-off-by: Roger Lu <roger.lu@mediatek.com>
> ---
>  .../bindings/soc/mediatek/mtk-svs.yaml        | 80 +++++++++++++++++++
>  1 file changed, 80 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml
> 
> diff --git a/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml b/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml
> new file mode 100644
> index 000000000000..bb8c345a0c0a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml
> @@ -0,0 +1,80 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/soc/mediatek/mtk-svs.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Introduce MTK SVS engine

Introduce? That's what this commit does, not what this binding is.

> +
> +maintainers:
> +  - Matthias Brugger <matthias.bgg@gmail.com>
> +  - Kevin Hilman <khilman@kernel.org>
> +  - Nishanth Menon <nm@ti.com>

This should be someone that knows the h/w. Not who applies patches. 
Perhaps you.

> +
> +description: |+
> +  The Smart Voltage Scaling(SVS) engine is a piece of hardware
> +  which has several controllers(banks) for calculating suitable
> +  voltage to different power domains(CPU/GPU/CCI) according to
> +  chip process corner, temperatures and other factors. Then DVFS
> +  driver could apply SVS bank voltage to PMIC/Buck.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - mediatek,mt8183-svs
> +
> +  reg:
> +    description: Address range of the MTK SVS controller.
> +    maxItems: 1
> +
> +  interrupts:
> +    description: IRQ for the MTK SVS controller.

Drop. That's kind of obvious with only 1 interrupt.

> +    maxItems: 1
> +
> +  clocks:
> +    description: Main clock for MTK SVS controller to work.

How many clocks (maxItems)?

> +
> +  clock-names:
> +    const: main
> +
> +  nvmem-cells:
> +    maxItems: 2
> +    description:
> +      Phandle to the calibration data provided by a nvmem device.

Need to define what each entry is.

items:
  - description: ...
  - description: ...

> +
> +  nvmem-cell-names:
> +    items:
> +      - const: svs-calibration-data
> +      - const: t-calibration-data
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - nvmem-cells
> +  - nvmem-cell-names
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/mt8183-clk.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        svs@1100b000 {
> +            compatible = "mediatek,mt8183-svs";
> +            reg = <0 0x1100b000 0 0x1000>;
> +            interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
> +            clocks = <&infracfg CLK_INFRA_THERM>;
> +            clock-names = "main";
> +            nvmem-cells = <&svs_calibration>, <&thermal_calibration>;
> +            nvmem-cell-names = "svs-calibration-data", "t-calibration-data";
> +        };
> +    };
> -- 
> 2.18.0
> 

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek